Construction of Mushroom Unit Building including internal WS SI and external services at Sidhpur Tehsil Dharampur Distt Mandi HP

Amount

Cutting in earth work in all heights/depths and in all kinds of soil such as kankar, moorum, shingal and decomposed or soft rock, hard rock i.e. their intermediate classification and chiselling/wedging out rock where blasting prohibited including saturated soils and filling in embankments etc. where necessary and disposal of all excavated unserviceable material in all leads and lifts including through mechanical transportation. Any damage to private/public property during execution will be restored by the contractor whatsoever the nature of the same may be. The serviceable material will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer-in-charge.

Excavation in earth work in all kinds of soils such as pick work, juimper work and chiselling/wedging out of hard or soft rock and disposal of all excavated earth up to any leads and lifts disposed earth to be levelled and neatly dressed as directed by the Engineer-in-charge.

Excavation in foundations, trenches etc., in earth work, in all kind of soils such as pick work,jumper work and chiselling/wedging out of hard or soft rock up to all depths stacking the excavated soil not more then 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers,when required in to plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer -in-charge.

Excavation in drains and channels etc. in earth work in all kinds of soil such as pick work, jumper work and chiseling/wedging out of hard or soft rock up to all heights including dressing of sides and bed and disposing of excavated earth up to all leads and lifts and disposed earth to be levelled and neatly dressed including carriage of material in all leads and lifts.

Excavation in earth work and filling in 15 cm layers in foundation and plinth including ramming, watering and consolidating upto all lead and lift including carriage of material in all leads and lifts.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete including carriage of material in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials in all leads and lifts.

Foundations, footings, bases of columns and the like mass concrete.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. up to 200 mm in thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attaached pillasters buttresses, plinth and string courses and the like.

Columns, pillars, posts and struts, square rectangular or polygonal in plan.

Stair cases with sloping or stepped soffits excluding landing.

Vertical fins and vertical sun breakers.

Beams, cantilever, girders and lintels. Sides and soffits of beam, beam haunchings cantilevers, bressumers and lintels not exceeding 1 mtr in depth in all heights from floor.

Edges of slabs and breaks in floors and walls:- Under 20 cm; wide.

Providing and laying cement concrete 1:4:8(1cement:4sand:8graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering and shuttering in foundation and plinth including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:8:16(1cement:8sand:16graded stone aggregate 20mm nominal size ) and curing complete on slab and floor excluding the cost of form work screed laid under flooring including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:5:10 with 15% plums and curing complete including the cost of form work for plain/reinforced concrete in retaining walls, breast walls, the size of plum should be 150 to 300mm as per drawing and HP. PWD technical specifications including carriage of material in all leads and lifts.

Providing weep holes in brick masonry/stone masony/plain reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full width of structures with slope of 1 (V) : 20 (H) towards drawing face complete as per drawing and technical specification including carriage of material in all leads and lifts.

Providing and laying cement upto all floor level cement concrete 1:2:4 (1 cement:2sand:4 graded stone aggregate 20mm nominal size) and curing complete including formwork in string courses coping bed plates, anchor blocks plain window sills and the like including carriage of material in all leads and lifts.

Providing and laying mechanically mixed vibrated reinforced concrete of mixed design to have characteristics strength of M-20 GRADE and curing complete excluding the cost of form work and reinforcement for reinforced concrete work including carriage of material in all leads and lifts:-

Foundations, footings, bases of columns and the like mass concrete.

Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers lintels in all heights.

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing up to all heights.

Vertical and horizontal (thickness not more than 0.10m) individually or forming box louvers and projected band upto floor all level.

Columns, pillars posts and struts upto floor all level.

Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth string courses etc from top of foundation upto floor two level.

Providing and laying mechanically mixed vibrated reinforced concrete of mixed design to have characteristic strength of M-20 GRADE for reinforced concrete chajjas not exceeding 10 cm thickness upto all heights including finishing the exposed surface with cement mortar 1:3 (1cement:3sand) to give a smooth and even surface, centering/ form work and curing complete excluding cost of reinforcement including carriage of material in all leads and lifts.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete including cost of binding wire up to all heights including carriage of material in all leads and lifts.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg of cement per sq. metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surface complete including carriage of material in all leds and lifts.

Providing throating or plaster drip and moulding to R.C.C. chajjas including carriage of material in all leads and lifts.

Brick work using 2nd class common burnt clay building bricks in foundation and plinth including carriage of material in all leads and lifts. In cement mortar 1:6(1cement:6sand).

Brick work using 2nd class common burnt clay building bricks in superstructure above plinth level up to all heights, in cement mortar 1:6(1cement:6sand), including carriage of material in all leads and lifts.

Half brick masonry using 2nd class common burnt clay building bricks in foundation and plinth in cement mortar 1:4(1cement:4sand) including carriage of material in all leads and lifts.

Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth level up to all floor level in cement mortar 1:4(1cement:4sand) including carriage of material in all leads and lifts.

Random rubble masonry/polygonal rubble masonry (un-coursed/brought to course) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12(1cement:6sand:12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6(1cement:6sand) including carriage of material in all leads and lifts.

Boulder filling dry hand packed in plinth under floor etc. including carriage of material in all leads and lifts.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames including carriage of material in all leads and lifts.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For shutters of doors indows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings including carriage of material in all leads and lifts.

Providing and fixing aluminium anodised powder coated pattern to existing window/ventilatior with 80mmx80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in aluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) including carriage of material in all leads and lifts.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) Glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/ sqm including carriage of material in all leads and lifts.

Providing and fixing bakelite sheet including carriage of material in all leads and lifts.

Providing and fixing fly proof galvanised M. S. wire gauge of IS gauge designation 85 G with wire of dia 0.56mm to window and clerestory windows including necessary fittings including carriage of material in all leads and lifts.

Supplying and fixing plain glass 4mm thick with putty and nails including carriage of material in all leads and lifts.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (confirming to IS: 6315) for aluminium doors including cost of cutting floors as required, embedding in floors and cover plates etc. complete as per the direction of the Engineer-in-charge including making good the floors including carriage of material in all leads and lifts.

Providing and fixing anodized aluminium sliding door bolts and anodized colour and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts:-

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws, nuts, bolts etc. complete including carriage of material in all leads and lifts:-

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws, nuts, bolts etc. complete including carriage of material in all leads and lifts.

Providing and fixing MS hooks and eyes including cost of screws with wooden chowkhats including carriage of material in all leads and lifts. 150mm.

Providing and fixing 100mm aluminium floor door stopper with rubber cushion screws etc. to suit shutters thickness complete including carriage of material in all leads and lifts.

Providing and fixing hydraulic door closer with necessary screws etc. including carriage of material in all leads and lifts.

Providing and fixing PVC slincer for door including carriage of material in all leads and lifts.

Cement concrete flooring 1:2:4(1cement:2sand:4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of material in all leads and lifts:-

40 mm thick.

50 mm thick.

Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1cement:3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads and lifts.

Provding and laying Duro stone vetrified tiles any size any colour of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of requirred shade to match the shade of tiles complete including carriage of material in all leads and lifts.

Provding and laying Duro stone vetrified tiles any size any colour of approved shade in skirting, risers of steps and dados laid on a bed of 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of requirred shade to match the shade of tiles complete including carriage of material in all leads and lifts.

Providing and laying digital tiles any size any colour of approved shade in skirting, risers of steps and dado on 12mm thick cement mortar 1:3(1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match tiles including carriage of material in all leads and lifts.

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick including carriage of material in all leads and lifts.

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade including border or kurb block grey or coloured over sub-base or concrete with 25mm thick average thickness of cement mortar 1:4 (1cement:4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (Sub base concrete floor to be paid for separately) including carriage of material in all leads and lifts. 60 mm thick inter locking blocks.

Providing and fixing stainless steel railing mark-36 pipe size top 2" pipe, post pipe 1" and 3" height in staircases including necessary fitting and position as per design approved by the Engineer-in-Charge including carriage of material in all leads and lifts.

Providing and fixing on wall faces PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm. including filling the joints with approved adhesive complete including carriage of material in all leads and lifts. 150mm dia pipes.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain including filling the joints with approved adhesive complete including carriage of material in all leads and lifts.

PVC Plain bend 150mm dia.

PVC shoe 150 dia.

Providing and fixing MS holder bat clamps of approved design to CI or PVC pipe embedded in and including cement concrete blocks 10x10x10cms of 1:2:4mix(1cement:2sand:4graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the walls etc. including carriage of material in all leads and lifts:- 150mm diameter CI/PVC pipe.

Providing and fixing laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or/ and residual bitumen applied hot at 1.45 kg per sq.m of area for each course second course of roofing felt type 3 grade 1 (hessian base self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cu.dm or 0.006 cu.m) per sqm. including preparation of surface excluding grading complete including carriage of material in all leads and lifts.

Making khurras 45x45 cm with average minimum thickness of 5 cm. cement concrete (1:2:4 (1cement:2sand:4 stone aggregate of 20mm nominal size) finished with 12 mm cement plaster 1:3 (1cement: 3sand) and coat of neat cement rounding the outlet complete including carriage of material in all leads and lifts.

Steel work welded in built up sections trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material inn all leads and lifts:-

In gratings, framed guard, bars, ladders, railings, brackets and similar work.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give fair and smooth surface including cleaning the surface of all dirt, dust, dust and other foreign matter:-Enamel paint other than white including carriage of material in all leads and lifts.

6mm cement plaster to ceiling including carriage of material in all leads and lifts. In cement mortar 1:3(1cement:3sand).

20mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts:-

In cement mortar 1:3 (1cement: 3sand)

In cement mortar 1:4 (1cement: 4 sand)

In cement mortar 1:6 (1cement: 6 sand)

Extra over item No. 56.02 for finishing with a floating coat of neat cement slurry including carriage of material in all leads and lifts.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts:-

In cement mortar 1:6 (1cement: 6 sand)

Applying Birla white wall care putty over plaster surface aftr thoroughly brushing the surface free from mortar drops, dust, loose materials and other forein matters sand papered smooth to give final matter finish to the surfacae complete including carriage of material in all leads and lifts.

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on un decorated wall surface to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing the surface even and sand papered smooth including carriage of material in all leads and lifts.

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on un decorated ceiling to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing the surface even and sand papered smooth including carriage of material in all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces two coats to give an even shadae and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete including carriage of material in all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6(1 cement : 3 sand :6graded stone aggregate20mm nominal size) including finishing the top surface of concrete smooth including carriage of material in all leads and lifts.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed of dry bricks/stone aggregate 40mm nominal size) well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts.

Constructing course rubble hammer dressed “U” shape open surface drain with side wall 15x22cm in cement mortar 1:6(1cement:6sand) and inside plastering with cement mortar 1:3(1cement:3sand) including earth work and laying 10 cm cement concrete in 1:5:10(1cement:5sand:10graded stone aggregate 40mm nominal size) and 7.5cm cement concrete 1:2:4(1cement:2sand:4graded stone aggregate of 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads and lifts.

Providing chases 75mm wide 50mm deep (average size) in walls for conduit/G.I. pipes and filling the same with cement concrete 1:3:6(1cement:3sand:6graded stone aggrregate 20mm and down gauge) after the conduit/G.I. pipe is laid (excluding the cost of conduit/G.I. pipe) including carriage fo material in all leads and lifts.

Providing and fixing to wall ceiling and floor Polyethene- Aluminium- Polyethene(PE-AL-PE) composit pressure pipes confirming to IS-15450, U.V. stablized with carbon black having thermal stability for hot and cold water supply, capable to withstand temprature up to 80 degree C, including all special fittings of .composite material (engineering plastic blend and brass inserts whereever required) e.g. elbows, tees, reducers, couplers and connectors etc; with clamps at 1.0 metre spacing. This includes testing of joints complete as per direction of the Engineer-In- charge, including carriage of material in all leads and lifts.

(20mm OD) Outer dia.

Providing and fixing to wall ceiling and floors galvanized mild steel tubes (Medium grade) tube fittings and clamps including making good the wall, ceiling and floors, including carriage of material in all leads and lifts, confirming to BIS specification.

15mm nominal bore.

20 mm nominal bore.

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) including carriage of material in all leads and lifts ;- 32mm nominal bore

Making connection of galvanized steel distribution branch with galvanized mild steel main 20 to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts.

Providing and fixing sand cast/cast iron spun spigot and socket waste and ventilating pipes (lead caulked joints to be measured and paid for separately) confirming to BIS specification including carriage of material in all leads and lifts. 100 mm nominal bore.

Providing and fixing cast iron cowl confirming to BIS specification including carriage of material in all leads and lifts.100mm nominal size.

Providing lead caulked joint to sand cast iron/cast (spun) iron pipes and fittings including testing of joints including carriage of material in all leads and lifts. 100mm nominal size.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G. I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts:-

1000 litres net capacity

Providing and fixing brass full way valve with wheel confirming to BIS specification including carriage of material in all leads and lifts:-

15mm nominal size

20mm nominal size.

Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC clamp ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC door bend with oval access door, ISI marked insertion rubber washers 3mm thick bolts and nuts including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixing single equal branch with oval access door, ISI marked insertion rubber washers 3mm thick bolts and nuts including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC cowl ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the walls and floors complete. 110mm x 75mm including carriage of material in all leads and lifts.

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1(1cement:1sand) (seat and cover to be measured and paid for separately including carriage of material in all leads and lifts:-

Ordinary closet.

Anglo Indian Universal closet.

Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10.00 litres capacity (full flush) European standred control low level PVC flushing cistern with fittings with a pair of brackets with fitting such as lead valve, syphon,15mm nominal size PVC ball valve with polythene float, with push button,coulping for connection with inlet and outlet and overflow pipes40 mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( overflow pipe to be measured and paid for separately) including carriage of material in all leads and lifts,

Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers:- Solid type white plastic seat and cover including carriage of material in all leads and lifts.

Providing and fixing vitreous china wash basin with single/double holes for pillar tap with C.I. or M.S. brackets painted white including holes and making good the same but excluding fittings confirming to BIS specification including carriage of material in all leads and lifts:- Flat back 550mmx400mm.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material in all leads and lifts.

Providing and fixing C.P. brass waste for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing chromium plated stainless steel grating 100mm confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing M.I. union for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifs.

Providing and fixing P.V.C. plastic waste pipe for wash basin or sink of following size BIS specification including carriage of material in all leads and lifts.32mm mm dia.

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs wth C.P. brass screws including carriage of material in all leads and lifts.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.I. brass screws, including carriage of material in all leads and lifts. 600x20mm

Providing and fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing C.P. brass bib tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.

Long Body

Short Body

Providing and fixing C.P. brass pillar tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.

Providing and fixing brass angle valve15mm without nuts & pipe confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing G.I./M.I. unions of following sizes(where not included in the item) including carriage of material in all leads and lifts confirming to BIS specification:-

15mm nominal size

20mm nominal size.

Providing and fixing PVC connection pipe with brass union 300/450 mm length and 15mm nominal bore including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube including carriage of material in all leads and lifts

Providing and fixing C.P. toilet paper holder including carriage of material in all leads and lifts.

Cutting holes through existing brick/stone walls including making good the same in cement mortar 1:6(1cement:6sand) per cm depth of cutting: Holes up to and including 400 mm square centimeter in area including carriage of material in all leads and lifts.

Providing 200mm wide cast iron rungs with chequered or ribbed non-slip surface including fixing in manholes/ septic tank with 200mmx200mmx100mm cement concrete 1:3:6(1cement:3 sand:6graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts.

Providing and laying (to level or slopes) and jointing reinforced concrete(light duty) non-pressure pipes 1st class NP-2 or P of the following internal diameter with collar and butt ends prepared for collar joints including testing of joints 150mm dia including carriage of material in all leads and lifts.

Constructing manhole with RCC top slab in 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8(1cement:4sand:8graded stone aggregate40mm nominal size) inside plastering 15mm thick with cement mortar 1:3(1cement:3sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size)finished smooth complete including curing and testing including carriage of material in all leads and lifts:-

(i) Inside size 800mmx800mmx 500mm deep including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm internal diamension total weight of cover and frame to be not less than 38 kg.(weight of cover 23 kg and weight of frame- -15kg) with 200 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(1cement:3sand).

(i) Inside size 800mmx800mmx 1000mm deep including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm internal diamension total weight of cover and frame to be not less than 38 kg.(weight of cover 23 kg and weight of frame- -15kg) with 200 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(1cement:3sand).

Supplying and fixing cast iron cover with frame for manhole of internal diamensions 450x610mm rectangular C.I cover (light duty) single seal pattern-I, the weight of cover and frame to be not less than 38kg. (Weight of cover 23kg and weight of frame 15kg), including carriage of material in all leads and lifts.

Constructing soak pit 2.5 metre diametre 3.00 metre deep with45x45cm dry brick honey comb shaft with bricks of class designation 75 and soil waste drain pipe 100mm diameter 1.80 metre long as per standard design with F.P.S. including carriage of material in all leads and lifts.

Kumar Associates