Proposed Construction of Play Ground at TP 58, FP 63 in new Lambha Area at Vatva Ward South Zone

Total Amount Without GST Rs.

estimated cost mentioned above. The amount of my/our tender works out as under

Estimated cost put to tender : Rs. 93,93,586.37 Estimated cost put to tender : Rs.

Add_____% Above : Rs ___________ Add_____% Below : Rs ___________

In words : Rupees _______________________ In words : Rupees _______________________

The contractor should get the sample of material in respect of quality and source of supply or manufacturer

approved by Consultant / AMC in all cases. All such approved samples should be kept at site in the custody

Note-1 of EIC-CMC/PMC/AMC. The tests for the make in external laboratory in presence of CMC/PMC/AMC to

be carried out by Contractor at his own cost as per relevant latest codes. Reinforcement steel & cement

original purchase bills shall be produced to CMC/PMC/AMC as and when asked for.

Note-2 Rate includes for any height, any level, any lead & lift and as per directed by EIC.

Signature of Contractor Additional City Engineer

Seal South Zone

Date Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

Proposed Construction of Play Ground at TP 58, FP 63 in Vatava Word (Lambha Area), South Zone for Ahmedabad Municipal

BOQ of Civil & Plumbing Work

Sr. No. Qty Description of item Unit Rate-23-24 Amount

1 EARTH WORK & CARTING

Clearing and grubbing road land includding uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto

1.1 1,861.00 300mm removal of stumps of tress cut earlier and disposal of unserviceable materials. Smt. 3.17

A) By Mechanical means in area of light jungle.

Excavation in all types of soil– soft, hard murrum or sand up to a depth of 1.50 m. from existing ground level including

1.2 sorting out and stacking of useful materials and refilling the sides of trenches with excavated earth or disposing of the

excavated stuff upto 50 Meter lead as directed by Clerk-of-Work. (manual)

a 525.50 Up to 1.50 Mt.Depth Cmt. 259.14

b 95.00 From 1.5 to 3.0 Mt.Depth Cmt. 280.05

Filling in plinth or area as directed with selected available excavated earth including watering, ramming, consolidating and

dressing to the required grades and levels.

Providing and laying pre-construction Anti termite treatment as per IS-6313 (Part-II) 1971 from standard and specified

1.4 988.00 agency approved by Clerk-Of- Works with ten years guarantee in foundation, under floors and periphery as per Smt 67.00

the special agency's specifications and as per directions of Clerk-of-Work. For all levels and leads.

Sand filling with sand as approved by Architect in plinth / under floor / elsewhere including watering, ramming,

consolidating and dressing to the required grades and levels as directed by Clerk-of-Work.

Conveyance charges of lime murrum building rubbish earth, manuar of sludge and excavated rock,fly ash & surplus

excavated earth from site with the any lead in the city as directed by EIC etc. complete.

Filling foundation and plinth with murrum or selected soil in layers of 20 cm. thickness including watering, ramming and

consolidation etc. complete.

2 - CONCRETE AND STEEL -

The structural concrete of the grade specified shall be control concrete as per IS: 456-2000. Use of weigh batcher, Mixture

machine, mechanical vibrator and controlled water cement ratio will be strictly enforced. (Use of concrete mixing plant on

site will preferable and design mix shall be produced from Contractor & same approval from st.consultants) Equivalent

Quality from R.M.C. also allowed.

- P.V.C spacers / Concrete spacers of appropriate size and design for the cover of reinforcement shall be used. -

- Item of reinforcement shall be separately measured and paid for. -

- In all item rates are for all floors other than specified floorwise. -

Cement concrete 1:2:4 in foundation, sunk slabs etc, floors etc. laid in line and level, well consolidated, cured, etc

Sr. No. Qty Description of item Unit Rate-23-24 Amount

R.C.C. work with controlled concrete of grade M-20/ M-25 /M-35in the following terms.The rate shall include cost of

shuttering, scaffolding, providing and laying concrete in shapes and sizes and to levels and grades as per design, curing

etc. complete.The reinfocement shall e paid seperatoly. Equivevalent quality of RMC(Ready Mix Concrete) from ISI/ISO

CERTIFIED PLANT ENSURING DISGN MIX STRENGTH WITH ALL LEAD,LIFT BY PUMP ETC. COMP.) is also

- allowed with same rate. While calculating the rate , Contractor shall understand that, This is fast track Project. It hence, -

contractor shall consider shuttering with steel props frames support ( Acro or Equivalent) for Concreting of Successive

floors without removing shuttering of bottom floor (Rate for All Floor & Heightes and No extra lead given for RMC

Plant)(RMC should without pozzolona & with OPC cement & minimum cement content for M-20 is 330 Kg/Cmt,

for M-25 is 340 Kg/Cmt, for M-35 is 350 Kg/Cmt)

2.2 88.50 Foundations,Raft,Footings,Padestals-M25 Cmt. 4,341.00

2.3 15.50 Columns- M25 Cmt. 7,372.00

2.4 15.00 Plinth beam & Tie beams M25 Cmt. 5,776.00

2.6 1.00 Lintels M-25 Cmt. 7,405.00

2.7 3.00 Beams, brackets M-25 Cmt. 6,033.00

2.8 7.50 Slab, balcony, weather shed, loft etc M-25 Cmt. 6,177.00

Steel Reinforcement (TMT Fe 500D) including supplying, cutting, bending, binding, fabricating and placing in the

various items of concrete. The rate to include cost of binding wire and concrete / P.V.C. spacers of appropriate approved

design. Foundations,Raft,Footings,Pedestals, SLABS , BEAMS, COLM, FOR PARDI , WALL , STAIR ETC. ANY

FLOOR HT. as directed by E.I.C.

3 - BRICK WORK -

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sq. cm. in cement

mortar 1:6 (1 cement : 6 fine sand) laid to any shape and thickness including raking out joints, watering, etc complete.

a 11.50 in foundations and plinth Cmt. 3,981.21

b 95.50 Ground Floor Cmt. 4,253.46

c 3.00 First Floor Cmt. 4,293.55

Half brick masonry in common burnt claybuilding bricks having crushing strength not less than 35kg/cm2 in cement

3.2 - mortar 1:4 (1 cement : 4 coarse sand) laid to any shape and thickness including raking out joints, watering, etc

complete.(B) Conventional

a 20.00 Ground Floor Smt. 633.99

4 - PLASTER AND POINTING/ FINISHING WORK -

Providing and laying Single coat Mala plaster in C.M. 1:4 (1 cement : 4 sand) finished smooth with mala, watering etc.

4.1 - complete.For all levels, hights and leads of works. (Rates are included the cost of P/F Chiken mash at junction/Joint of -

Concrete and Masonary)

- Internal Walls (Min 15 mm thickness)at all hts. -

a 130.50 Ground Floor Smt. 155.61

b 21.50 First Floor Smt. 178.77

4.2 - Ceiling (Min 10 mm thickness)at all hts. -

a 25.50 Ground Floor Smt. 139.23

20mmth. Sandface /double coat mala cement plaster on walls upto all hts above ground level consisting of 12mm thk

4.3 1,189.00 backing coat of C.M.1:3 (1 cement :3 sand) & 8mm thk finishing coat of CM(1:1)1 cement :1 sand,etc.complete(Rates are Smt 297.68

included the cost of P/F Chiken mash at junction/Joint of Concrete and Masonary)

Sr. No. Qty Description of item Unit Rate-23-24 Amount

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including neat cement finishing, watering

4.5 36.00 Providing throating or plaster drip and moulding to R.C.C chhajja. Rmt 25.00

Providing & applying 3 coats of plastic emulsion paint of approved brand & manufacture on under coated wall & ceiling

4.6 - surface to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign -

matter and sand papered smooth. ( Rates are included the cost of P/L Birla Putty)

a 152.00 Wall Smt 111.83

b 25.50 Ceiling Smt 119.40

Providing & applying two coats of External Textured Plaster fine filaments made of polymer and including one coat of

primer & two coats of external acrylic emulsion paint of approved make & colour shade to external wall with making

grooves. Applying sand papering the surfaces to remove dust, dirt etc; filling the cracks with approved filler material to

achieve level surface for all floor and all height as approved by Architect/ Engineer in Charge.

5 - FLOORING AND PAVING -

Providing and laying upto 25 mm thick polished kotah stone flooring (60 x 60 cm) or platform slab size for stair, pantry

5.1 3.00 (not less than 1500mm long size) with hand dressed and filled edges, set complete on min 20mm thick cement mortar Smt 769.00

bedding 1:6, to get fine invisible joints, Grey/colour cement floated and machi etc. complete as direction by E.I.C.

Polished kotah stone skirting (75 mm high) as per item above but hand polished including making zari in brick wall / RCC

5.2 1.00 column and and filling the zaris above the stone after fixing the stone with plaster and neatly finished with rich cement Smt 888.00

putty etc complete.

Providing and fixing 18 mm thick granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, door / window sills , facias and similar locations of required size, approved shade,

5.3 1.50 colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white Smt 3,083.60

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to

give high gloss finish etc. complete at all levels.

Providing and laying Granite slab (18 mm thick) one side polished flooring, over 20 mm (average) base of cement mortar

1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing, matching color pigments

including hand polishing for removing any unevenness on the surface,curing and cleaning complete all as per detailed

drawings and specifications as directed by EIC for all lift,all floor levels and leads.The item to includes all materiral,

fixing, scaffolding, labour, Wastage etc. complete in all respects. Required test shall be done as per relavent IS Code.

Protection with minimum 10mm thick POP Laying over PVC bubble Sheet /Floor protector approved by EIC and later

removing complete as per direction of Engineer-in-Charge. Note: No extra payment pay for architectural Ornamental

Design upto 10% of flooring area. Rate shall be inclusive of cutting of slab in any shape, at any level for service cutout.

GRANITE FRAME FOR DOORS:-

Providing & fixing Granite for Door Jamb, Sill and the like similar location of 18mm thick, from 1050 to 2105mm in

length and width 150mm /250mm in cement mortar 1:2 [1 white cement : 2 marble dust] with an admixture of pigment to

match the marble shade including fixing with copper pin 7.5cm long of 6mm diameters in cement mortar 1:2 (1 cement :

fine sand) including making rebate for door shutter in Granite, edege polishing and moulding etc. completed as directed by

EIC / Consultant.(Clear measurement will be taken on sqmt basis for both Jamb)

Sr. No. Qty Description of item Unit Rate-23-24 Amount

Providing and fixing 18mm thick machine cut River wash finish Granite of approved quality by architect over 20 mm

(average) base of cement mortar 1:4 (1 cement : 4 coarse sand) for staircase steps, entrance,dedo, platform,shelves,

flooring, lift etc. with machine cut edges as required and laid in desired pattern. The rate are included to provide groove in

flooring and edge moulding werever requried etc. comp.

Providing and laying Ceramic glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm/300 mm x

5.7 46.50 600 mm x 8 mm or approved size in skirting, risers of steps and dedo with construction adhesive as per manufacturs Smt 1,003.00

specification & as directed by EIC

Providing and laying 1st quality Full body Glazed/ Matt vitrified tiles for Floor / Dado in 600 mm x 600 mm size (size and

thickness to be specified by the manufacturer),of any desired shade & color specified by Architect, laid with cement paste

on and including cement mortar 1:4 bedding laid to proper slope or as required on site, line and level, as specified. All

joints filled with epoxy grout (avg. 4*10 to12 mm) and protection with minimum 10mm thick POP Laying over PVC

bubble Sheet/Floor protector approved by EIC and later removing and maintaining it till handing over, including cutting of

tiles,curing and cleaning complete all as per detailed drawings and specifications as directed by EIC for all lift,all floor

levels and leads. The item to include all materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects etc.

complete as direction by E.I.C.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring area. Rate shall be inclusive of

cutting of tiles in any shape, at any level for service cutout.

Providing & laying china mosaic flooring on top of integral waterproofing using small broken chips of white/colour glazed

tiles set in crazy pattern, as desired by Architect, in cement mortar laid to required slopes and simultaneously filling in

remaining top joints in the waterproofing layer and tamped with wooden block to get smooth even surface to required

5.9 24.50 slope, filling the joints with cement grout , cleaning the surface on completion and curing etc. complete. The work sahll be Smt 479.00

carried out in a workman like manner to make the give a guarantee on stamp paper for the performance for a period of ten

years.The work shall be measured in square meter of the actual area laid and no extra shall be paid for vatahs, rounding at

junction of wall and floor and around water spouts, water outlets etc.

Providing and laying Paver block over a bed of sand (min 80mm thickness) job includes spreading sand on existing driven

way, compacting sand bed by ramming and interlocking them with the use of a suitable plate vibrator. job includes all

5.10 - incidental work like cleaning the site of debris etc. The paver blocks supplied by the party must confirm to following notes -

and completed as directed and up to satisfactory of EIC. For All level, lift, leads. (No extra payment shall be made for

Architectural detail) (No extra payment shall be made for bed of sand)

a 262.50 80 mm thick M 350 Grade Smt. 801.00

6 - DOOR-WINDOW/ STEEL WORK/ S.S. WORK -

Providing and fixing 35mm thick flush shutter for doors, windows & clearstory windows incl. Indian teak wood frames

6.1 - cm x 7 cm including anodized alluminium fixture and fastenings incl. primer coat of approved quality and two coats of oil -

painting etc. complete.(Fully pannele or partly panneled and partly galzed door)

4.00 (A) Flush shutter with both side laminate of 1.5 mm th. Including westage, S.S. Hings, fittings and fixtures. Smt. 5,530.00

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (Jindal Section :2434,

6.2 2.00 @ Wt. 0.643 Kg/mt) with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc Smt 1,163.92

complete for Ventilation

Providing, fabricating and fixing MS fixed grills of desired pattern , made up from MS flat /square bars/ round bars at

6.3 34.00 required spacing and fitted to window frame with screws including two or more coats of synthetic enamel paint over a Kg. 81.00

primer of Zinc Chr. as per architectural dwg.

Sr. No. Qty Description of item Unit Rate-23-24 Amount

Providing and fixing anchor fasteners 10/12 mmdia including drilling and fixing in the member as directed by Engineer-in-

charge complete. 10/12mm & 120mm long

Providing and fixing stainless steel (Grade 304) railing,daso, grill work etc. made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts omplete, i/c fixing the railing with necessary accessories & stainless steel dash

6.5 42.50 fasteners , stainless steel bolts etc., of required size, on the top of the floor or the ide of waist slab with suitable Kg. 446.00

arrangement as per approval of Engineer-in-charge, ( for payment purpose only basis of standard theorical weight of

stainless steel members shall be considered. No extra shall be paid for fixing accessories such as nuts, bolts, nails,

fasteners etc.).

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter having extra reinforcement on sides &

edges in polish finish. The core of the shutter & frame is to be filed up with injected polyurethene foam done in situ

6.6 4.50 alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & Smt 2,589.15

shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S

hinges with necessary screws & alluminium S.S fixtures & fastenings & fastener sleeve.

7 - MISCELLANEOUS ITEM -

Providing and laying integral cement based water proofing treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-

charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1

cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-

charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing

conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls

7.1 24.50 upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a Smt 737.00

second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS :

2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4

(1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-

charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with

trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished

shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be

done in order and as directed

and specified by the Engineer-in-Charge :

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and laying rubble soling, 230 mm thick, in a compact manner,foudation, road, footpath etc. using 200 to

7.2 60.50 mm. cut size stones including filling the gaps with 40mm metal and packing with stone chips with murrum covering and Cmt. 1,900.00

levelling the surface after filling the voids including watering, ramming well and consolidating each layer, as directed.

7.3 3.00 Sinage - internal and external signage boards in vinyl, ACP sheet etc. as per architects details sq.mt. 5,600.00

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm x6 mm and oil

painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples including fixing the postsin ground with

M x 0.5.M x 0.5 M. block in C.C1:5:10 etc complete

Sr. No. Qty Description of item Unit Rate-23-24 Amount

7.4 - Cricket Pitch

Pitch Construction 1.st Layer

13.50 Supply and Laying Core sand 2" Layering (as per approved sample) supply of all labour,also includes dressing leveling of CUM 2,000.00

27.00 2nd Layer 4" BRICK LAYER with 1" coarse sand filling CUM 7,500.00

Pitch Construction 3rd Layer-

13.50 Supply & laying Core Sand 2" Laying(as per approved sample)suplly fo all labour also includes dressing leveliing of CUM 2,000.00

tranch 82ftx100ft

Pitch Contruction 4th Layer-

For making pitch supply & laying 4" dry and wet compaction equally from bottom of top level but in the form of

27.00 Sandylome @ 90:10 OR 4” layer of fine loomy sand (silt +sand in equal ratio) (as per approved sample) including supply CUM 2,000.00

of labour with dressing & levelling of trench etc and also includes dressing leveling of trench as desired compaction and

quantity is compacted @35 to 40 %

Pitch Construction 5th Layer-

Supply & laying compacted layer by using palte vibrator of 8” good quality and approved Clay soil / Black cotton soil

with compacted in 2” layers along with the using scratching by panja and using plate vibrator x 4 times (as per approved

sample) with water spreay , labour with proper grinding & shorting , dressing & levelling of pitch as per desired level and

compaction, quality of clay soil shall be-as per BCCl Norms supply of all labour, T & P etc and also includes dressing

leveling of trench

- 1. Have high clay contants 50-70%, Silt 5-20%, Fine sand -10-20%, Medium sand -0-10%, Course sand – 1%. -

- 2. Have good hydraulic conductivity. -

- 3. Swell and shrink well, cracks to allow water and air to penetrate deep and regenerate. -

- 4. Retain moisture. -

- 5. Encourage grass recovery. -

- 6. PH Value shall be 7-8. -

- 7. Crushing strength -0.8-1.6 MPA. -

- 8. Cracking pattern –breaking in to 2-5 pcs. -

- 9. Linear shrinkage- 8-15 preferably 10 -

- 10. Dispersion – between 0 & 8 -

- 11. Sodium content-,<3% -

- 12. Organic matter-<5%. -

Supply & laying lsl 110 MM PVC Pipe (underneath) around the Pitch Square with a gradient of 1:100 Feet and connected to the

main outward Drainage system through PVC / 4” dia Pvc perforated pipe (perforation at half of the pipe at top level), wrapped with

50.00 geo-fabric cloth, covered by stone granules, sand etc and at any one direction along with the desired slope ratio. connected with RM 1,483.00

boundary storm water drain line.

22.50 Supply & laying lsl 150 MM PVC Pipe plain connect to main strom water line with pitch block rain water drain line. RM 1,685.00

8 - PLUMBING/SANITORY AND DRAINAGE WORK -

Providing & fixing Wall-mounted European Closet Suite P-Trap (White/Light Coloured) with Dual Flush Tank , PVC pan

connector, seat & lid (heavy duty) including C.I. Brackets,C.P. Flush cock, C.P. brass hinges, All Internal fittings

8.1 3.50 complete with rubber buffers, C.P. nuts, bolts, ChaKi, etc making holes in walls & floors, & finishing for ready to use.The No. 5,688.00

rate includes Providing & fixing 15mm Angle Valve with braided hose pipe as per product detail, jet spray including

cutting and making good the wall where required.

Sr. No. Qty Description of item Unit Rate-23-24 Amount

Health faucet - Providing & fixing of Hand Jet Shower (Health Faucet) with 1mtr Flexible PVC Tube, wall hook, and 2-

Providing and fixing coloured glazed oval type counter wash basin 550 x 460 in size and make specified by the Architect

8.3 3.00 with one C.P. pillar cock, C.P. stop cock, P.V.C. feed pipe C.P. waste coupling (1 ¼"), rubber plug with C.P. chain, CP ( No. 2,000.00

as per architectural detail dwg.)

Providing & fixing White/Light Coloured Vitreous China Large Urinal 590mm x 375mm x 390mm as per product detail

8.4 1.50 with Flushing System as per product detail, with C.I. hangers, Bottle Trap, Prassmatics angular cock, Waste Coupling, No. 3,879.00

including cutting and making good the walls and floors wherever required.

Providing and fixing 12mm dia C.P. bib cock of approved make like jaquar or Essess or any other type and make specified

8.5 5.50 by the Architect. All pillar cocks, stop cock, angle cock etc to be Jaquar or EssEss make with quarter turn disc ceramic No. 750.00

cartridge and chrome finish.

Provdg. & fixing C.P.Brass towel rail complete with C.P. Brass brackets fixed to wooden pluge with C.P. brass screws and

washers etc. complete as per architecture detail & Instructed by E.I.C.

Providing & Fixing S.S type soap dish of approved by consultant/Architect, including civil cutting & backfilling as well

as making good the walls.

Providing & fixing rigid C.P.V.C. pipes of Ashirvad FlowGuard or astral orapproved equivalent make (SDR 13.5) with

8.9 - necessary SWR fittings, coupler, bends, tees etc and fixed to walls/ columns with PVC clamps with standard fittings joints -

to be filled with approved solution etc. complete.

a 21.50 50 mm dia. Rmt 634.00

b 4.50 40 mm dia. Rmt 409.00

c 14.50 25 mm. Dia. Rmt 218.00

d 12.00 15 mm. Dia. Rmt 131.00

Providing & fixing rigid P.V.C. pipes, Prince, Supreme of approved equivalent make (10 kg/cm2) with necessary SWR

8.10 - fittings, coupler, bends, tees and fixed to walls/ columns with PVC clamps with all neccessary specials standard fittings -

joints to be filled with approved solution

a 19.50 110 mm dia Rmt 318.00

b 15.50 75 mm. Dia. Rmt 178.00

c 14.50 50mm dia Rmt 105.00

d 6.00 40 mm. Dia Rmt 79.00

e. 6.00 32 mm dia. Rmt 73.90

Providing and fixing heavy gunmetal sluice valve of approved make(Zoloto or equivalent make ) and quality approved by

Providing and laying 150x100 (6" x 4") S.W. gully trap with 300x300 inside size of brick masonry chamber and 200 dia

8.12 5.50 CI circular cover including making necessary joints with incoming and outgoing pipe etc complete. Joints filled with rich No. 1,203.00

8.13 - Providing and fixing in position PVC Ventilating cowl to pipes. -

a 2.00 110 mm dia. PVC pipe No. 491.00

b 3.50 75 mm dia. PVC pipe No. 362.00

Sr. No. Qty Description of item Unit Rate-23-24 Amount

Providing and laying stoneware pipes of approved quality with all fittings and fixtures and laying to the required levels and

8.14 - gradients to the required slope including necessary excavation of trenches, laying of pipes and jointing using spun yarn and -

a 29.00 230 dia S.W.G. pipe Rmt 350.00

b 86.50 150 dia S.W.G. pipe Rmt 183.00

c 29.00 100 dia S.W.G. pipe Rmt 134.00

Providing and laying cement concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40 mm nomonal size)

bedding for stone ware pipes of following internal diameter with necessary formwork and curing complete.

a 29.00 230 dia S.W.G. pipe Rmt 270.00

b 86.50 150 dia S.W.G. pipe Rmt 167.00

c 29.00 100 dia S.W.G. pipe Rmt 99.00

Costructing brick masonry chamber for under ground Inspection Chamber & bends with bricks having crushing strength

not less than 35 Kg./Sq cm. In CM 1:5 C.I. Cover with frame ( light duty ) 455mm x 610mm internal dimensions : total

weight of cover with frame not less than 38 Kgs. ( Wt.of cover 23 Kgs.and Wt. of frame 15 Kgs.) R.C.C. top slab with

1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) foundation concrete 1:5:10 inside

plaster 15 mm th. with cement mortar 1: 3 finished smooth with a floating coat of neat cement on walls and bed concrete

a 1.50 (I) Inside Dimensions 455mm x 610 mm Each 2,444.00

Construction Manhole with R.C.C. topslab in 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm

nominal size ) foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 brick bats 40mm -50mm size ) inside

plastering 15mm th. With cement mortar 1:5 ( 1 cement : 5 coarse sand ) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix ( 1 cement : 2 coarse sand : 4 stone aggregate 20mm nominal size ) finished

smooth complete incl. curing & testing ( I ) Inside size 900mm x 1200mm & 1.5 M deep incl. C.I. cover with frame size

560mm diameter total weight of cover & frame to be not less than 128 Kgs. ( Wt. of cover 64 kg & Wt. of frame 64 Kg.)

(A) with 230mm th. brick masonry using brick having crushing strength not less than 35 Kg,/Sq. cm in cement ortar 1 :

( 1 cement : 5 coarse sand )

a 2.00 A-type depth 0.90meter for 150mm dia. Sewer No. 9,752.00

b 1.00 B-type depth 1.50meter for 150mm dia. Sewer No. 16,816.00

c 1.00 C-type depth 2.24meter for 150mm dia. Sewer No. 19,755.00

HANDICAP TOILET

Handicaped Toilet

Providing and Fixing Handicap Toilet set including EWC, Cistern, Seat Cover, Fittings, Washbasin,, Hinged Rail,

Grab Bar and Faucet with Spatula Lever including Cast Iron chair backed and necessary bolts and nuts complete,

including painting of fittings and brackets, cutting and making good the walls and floors wherever required to the

satisfaction of Engineer-In-Charge. Special Needs Toilet Set: Jaquar - CNS-WHT-755SN + Cistern Set CNS-

WHT-207, Wash Basin CNS-WHT-811 & Grab Bar 2 No. - WAC-WHT-BG0800 & WAC-WHC-BR0600 -

nos.+ or Equivalent approved Make. Rates includes all lead & lift as directed by EIC.

8.19 - PERCOLATION WELL -

41.50 Boring and Sinking 30 cm. Diameter. Percolation well Rmt 760.00

1.00 Soak well around 3.0 m. dia. X 5.0 m. liquid depth No. 1,30,400.00

1.00 Brick masonry collection cum filtration tank around soak well No. 34,500.00

Sr. No. Qty Description of item Unit Rate-23-24 Amount

57.50 15 cm. diameter strainer pipes (Johnson make) having slot size 1.5 mm x 57 mm (72 slots in one line) in the casing pipe Rmt 1,830.00

Supplying, fitting, fixing and lowering 30 cm. diameter strainer pipe 1.2 m long (Johnson make) having slot size 1.5 mm x

57 mm (72 slots in one line)

1.00 Providing and lowering 15 cm size M.S. (3 m long) bail plug to the bore hole. Set 3,800.00

Supplying, lowering, fitting, fixing and joining with Strainer, 15 cm. diameter M.S. Pipe of minimum 5.40 mm wall

1.00 Cement ceiling the saline zone as per logging report and as directed by the employer. LS 10,265.00

Supplying, washing and shrouding with approved gravel, the annular gap between the casing pipe and the remaining

annular space to be filled in with puddle clay (for which no measurement with be taken and paid for ).

1.00 Hire and labour charges for necessary tools and plants for conducting proper tests for percolation water, No. 14,945.00

9 - OTHER ITEMS -

Demolition of brick work and stone masonry including stacking of serviceable materials and disposal unserviceable

materials with all lead and lift in cement mortar

Providing & fixing PVC OH Tank (Sintex or equivelant make approved by Architect) with piping, valves and neccasary

standard fixtures fittings and testing ect. Complete on terrace as directed by E.I.C.

Providing and layiong non pressure hume pipes of Np2 300mm/230mm/150mm dia below mention quality including

9.3 - excavation of trenches,laying. The pipes as per lay out Drawing, filling the joints with stiff mixture of cement mortar (1:1) -

and jute, curing,testing. The pipe and refillling the trenches etc.complete as directed for pipe by Engineer-In-Charge.

Providing and Fixing 75 mm (3”) /100 mm dia(4")dia P.V.C. nahni trap with aluminum / PVC Jali at top including brick

masonry around, complete as directed. Joints filled with rich cement mortar and made water tight.

Providing, laying and fixing 200 mm wide PVC water stopper of approved make and grade thickness in concrete work for

9.5 17.50 water tightstructures like retaining walls of pound water body and underground water tank including cleaning and placing Rmt. 410.00

in line level etc. complete, as directed.

Providing and Laying Precast in m-250 Kerb Blocks of size 300mm x 300 mm, including necessary excavation, cutting the

road, laying PCC 1:4:8 (1 part cement : 4 part sand : 8 part stone aggregate 20/37 mm, down size) 100 mm thick

shuttering, exposed rendering, curing and filling bituminious mastic in expansion joint but excluding reinforcement at

directed by EIC and as per the details and drawings.

RCC Underground water tank as specified by plumbing consultant or AMC Fire department including Excavation,

P.C.C., bottom slab,top slab, periphery walls, form work, water proof plaster on wall (Inside & Outside) and waterproofing

,etc.complete as per Structural design and details,piping,valves,fittings and fixtures as directed (Reinforcement steel

should not give in seperate item)

Providing, Fabricating and erecting TATA Structura or equivalent Pre Fabricated or Pre-engineering Structure made of

sections made from high tensile steel plate having strength of E355 grade (YST 355 Mpa & UTS 490 Mpa) including

necessary connections, welding, insert plastes, slidce plate etc. complete with one coat of zinc chrome and two coat of

enamel paint etc. complete as directed by EIC.Rate includes for all floor all lead & lift.

Movable Goal Posts Made with branded high-quality MS Steel Pipe in 4" Dia of Branded Epoxy Paint with Rust &

9.9 2.00 Corrosion Free and Zero Vibration the Size: 24 Feet x 8 Feet (7.32 mt Long and 2.44 mt Hight, Back Support of 1.5"). The Nos. 1,50,000.00

Poles Comprise wheels which make it easy to move.

Sr. No. Qty Description of item Unit Rate-23-24 Amount

9.10 2.00 Goal Nets High Rigidity Material 4.5 mm machine knitted the colour will be as per the FIFA standards requirements Nos. 15,000.00

10 - Landscaping -

10.1 245.00 Kamp (river silt) 6” overall Sqmt. 65.00

10.2 245.00 Fertilizer (farm yard manure) for plantation area (2” layer) Sqmt. 150.00

10.3 230.00 Providing pesticides ,dust as directed by architect engineer incharge. KG 160.00

10.4 230.00 Providing pesticides ,liquid as directed by architect engineer incharge. Liter. 250.00

Grassing with selection No.1 grass In rows 5 cm apart in both directions including watering and maintenance of the lawn

for 3 months or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying farm clay

up 300 mm thick, sludge, manure,pesticides , extra earth, disposal of rubbish, trench excavation and all labour with lead

and lift etc. complete as directed by EIC.

Providing & Planting of Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth

10.6 - with mixing of cow dong and pesticide.planting the following plant of 4' to 6' height stack it well, maintain it for 3 month

name of plants as below etc completed as dircted by E.I.C/PMC.

a 10.00 Champa Tree (6') Nos. 250.00

b 5.00 Garmalo Tree (6') Nos. 275.00

Providing & Planting of Deep rooted exoitic palm trees Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with good earth

10.7 with mixing of cow dong and pesticide.planting the following plant of 8' to 10' height stack it well, maintain it for 3 month

as below etc completed as dircted by E.I.C/PMC.

a 5.00 Ashoka Tree (8') Nos. 350.00

b 5.00 Gulmohar Tree (8') Nos. 300.00

c 5.00 Neem Tree (8') Nos. 270.00

Providing & Planting of Ornamental shurbs Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with good earth with mixing of

10.8 cow dong and pesticide.planting the following plant of 4' to 6' height stack it well, maintain it for 3 month as below etc

completed as dircted by E.I.C/PMC.

a 25.00 Rafic Plant (4') Nos. 375

b 75.00 Red Ixora Plant (4') Nos. 125

c 50.00 White Ixora (4') Nos. 125

d 50.00 Karan Plant (4') Nos. 60

e 50.00 Canna Plant (4') Nos. 12

f 80.00 Panama Rose Plant (4') Nos. 75

g 80.00 Lily Plant (4') Nos. 12

h 30.00 Song of India Plant (4') Nos. 150

TOTAL AMOUNT of Civil & Plumbing Work

TOTAL AMOUNT of Civil & Plumbing Work

AHMEDABAD MUNICIPAL CORPORATION

Proposed Construction of Play Ground at TP 58, FP 63 in Vatava Word (Lambha Area), South Zone for Ahmedabad Municipal Corporation.

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall

/ ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

with medium class Rigid PVC pipe and accessories

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with

E-2 2 primary light with accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with no 10.00 122.21

necessary Lamp holder / ceiling rose / H.D.Connector as directed.

with medium class 25 MM DIA Rigid PVC pipe and accessories

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires,

in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type

E-3 3 electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base no 2.00 598.93

frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured /

metallic front plate modules erected on / in wall / ceiling with following type accessories

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

E-6 6 following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box no 5.00 669.63

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Wiring for the 250 volts single phase and neutral 16 amps switched socket outlet with 4.0 sq.mm FRLS flexible copper conductor 1100 volts grade

wires of approved make with concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 16 amps 5 pin switch

socket outlet of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box with 2.5 sq.mm PVC insulated

copper conductor stranded flexible "FRLS" wire.

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open

E-8 8 along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Mtr. 150.00 32.32

Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or open

E-9 9 along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Mtr. 100.00 52.52

Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm thickness

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab along with

E-10 10 continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Mtr. 100.00 64.64

Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing & erecting PVC 1mm thick Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.

Providing & erecting PVC 1mm thick Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.

Providing & erecting PVC 1mm thick Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.

Providing & erecting 1mm thick Steel Flexible Conduit with required nos. of coupling, steel bushes, Check-nuts etc. complete of following sizes.

Providing & erecting 1mm thick Steel Flexible Conduit with required nos. of coupling, steel bushes, Check-nuts etc. complete of following sizes.

Providing & erecting 1mm thick Steel Flexible Conduit with required nos. of coupling, steel bushes, Check-nuts etc. complete of following sizes.

MAINS : ( not for Point wiring )

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

E-17 17 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper mtr 50.00 422.18

lugs, nuts and bolts if required.

Supplying and Laying of 4 nos. of 10 sq mm Cu. FRLS flexible wires with 2 nos 4 sqmm Cu. FRLS flexible wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with

E-18 18 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size mtr 50.00 248.46

Supplying and Laying of 4 nos. of 6 sq mm Cu. FRLS flexible wires with 2 nos 2.5 sqmm Cu. FRLS flexible wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with

E-19 19 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size mtr 50.00 140.39

Supplying and Laying of 2 nos. of 6 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS flexible wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with

E-20 20 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size mtr 50.00 107.06

Supplying and Laying of 2 nos. of 4 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS flexible wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on

E-21 21 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size mtr 150.00 78.78

Supplying and Laying of 2 nos. of 2.5 sq mm Cu. FRLS flexible wires with 1 nos 1.5 sqmm Cu. FRLS flexible wires

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

One wire 6.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

One wire 10.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

One wire 16.00 sq. mm

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

One wire 25.00 sq. mm

Distribution Board-TPN

E-26 26 Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 4 SPMCB as outgoing no 1.00 6,066.06

per phase (i.e. 12 way per phase D.B.)

Distribution Board-SPN

E-27 27 Supply, Erecting, testing and commissioning of SPN D.B.with space for DPELMCB as incoming and 8 SPMCB as outgoing per phase (i.e. 12 way D.B.) no 1.00 6,066.06

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking capacity 10 KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark

Miniature circuit breaker single pole suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark

6 to 32 A SP MCB

E-30 30 40Amp SP MCB no 2.00 678.72

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

E-31 31 box having following capacity no 4.00 299.97

6 to 32 A DP MCB

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed

25 to 32A / 30mA/100 mA DP ELMCB

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

E-36 36 having following capacity no 2.00 587.82

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

E-37 37 having following capacity no 2.00 647.41

(b) 40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity

6 to 32A FP MCB

Approved make four pole moulded case circuit breaker having breaking Capacity ICU of 35KA. At 415 V, having normal current rating up to 125A. With fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all iternal connections & complete erected in existing 16 G.M.S. housing.

ICS= 100% of ICU only.

Approved make four pole moulded case circuit breaker having breaking Capacity ICU of 35KA. At 415 V, having normal current rating up to 200A. With fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all iternal connections & complete erected in existing 16 G.M.S. housing.

ICS= 100% of ICU only.

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised

permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary

connection erected as directed.

E-44 44 25 Amp DP Dinrail Mounted Contactor no 2.00 1,827.09

E-45 45 SITC of 40 Amp DP Dinrail Mounted Contactor no 2.00 3,040.10

E-46 46 SITC of IP65 Polycarbonate enclosure for DP MCB no 2.00 1,558.43

E-47 47 SITC of IP65 Polycarbonate enclosure for FP MCB no 2.00 1,654.38

E-48 48 SITC of IP65 Polycarbonate enclosure for FP MCCB no 2.00 2,317.95

E-49 49 SITC Of 32A x 250 Volt single phase Power socket outlet point having IP rating of IP:65 at convenient location with MCB.for outdoor duty. no 2.00 7,957.79

E-50 50 SITC Of 32A x 415 Volt three phase Power socket outlet point having IP rating of IP:65 at convenient location with MCB.for outdoor duty. no 2.00 8,408.25

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface

proper. Providing and erecting iron clad cable route marker duly marked with ELE.CABLE of size 23 cms.X 12 cms. Flushed with ground in cement foundation

as directed by Engineer in charge. The width shall be as per requirement

Covering of cable with second class bricks laid cover the cable crosswise & also on both sides with covering of 7. 5 Cms. layer of sand above & below cable

E-52 52 (cable shall be laid in 0.9mtr.deep & 0.4 Mtr.wide trench). Where there are more than one cable in the trench on either side of the cable, 5 Cms. over lapping of rmt 20.00 134.33

bricks shall be provided.

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with necessary curing for pole

muffing or any other purpose.

Providing burnt brick masonry with 1:6 cement concrete duly plastered including watering, stacking joint on exposed faces, rocking at joints on exposed faces

and watering complete

Construction of brick masonry pulling chamber 450 mm x 450 mm inside clear size and depth up to 0.6 meter with 350 mm thick masonry in cement mortar

proportion 1:5,cement finish cement plaster in CM proportion of 15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum

E-55 55 mm thickness in M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame and 450 mm dia cover of FRC for the Heavy Duty. no 5.00 9,696.00

Rate also inclusive of excavation and back filling & clearing the site by removing debris & Shifting of the debris & making site good As per the Instruction of

the Engineer In charge complete in all respect.

SITC of factory made FUJI brand Precast Chamber, having size (in to in) of 800 mm (L) X 800 mm (B) X Height : 600,800,1000,1200,1400,1600,1800,2000 mm

T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High

Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 /Fe 500 D shall be used for reinforcement. The contractor shall

prepare & provide the base using PCC/Foundation concrete as a levelling course as per drawing / as recommended by the consultant depending upon the

foundation soil strata. The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-

E-56 56 shackle (Hanging hole) for safe & fast mechanical installation. Hole should be provided at site (No Factory) for connection at the waffle side of chamber as per no 2.00 16,342.81

the site requirement.The Precast cover having size 944 x 944 X 120 mm thick, designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load,

confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-

50 cube strength & Fe 500 / 500D shall be used for reinforcement. The lid may have in build specially designed lifting inserts of appropriate load carrying

capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It

should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge.

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

Supplying of factory made FUJI brand Precast Chamber, having size (in to in) of 1000 mm (L) X 1000 mm (B) X Height: 800,1000,1200,1400 mm T-25 load

carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance

Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 /Fe 500 D shall be used for reinforcement. The contractor shall prepare &

provide the base using PCC/Foundation concrete as a levelling course as per drawing / as recommended by the consultant depending upon the foundation soil

strata. The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging

hole) for safe & fast mechanical installation. Hole should be provided at site (No Factory) for connection at the waffle side of chamber as per the site

requirement. The Precast cover having size 1144 x 1144 X 150 mm thick, designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load,

confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self

Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 / 500D shall be used for reinforcement.The lid may have in build specially

designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the

casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In

Supplying , fabricating and installation of various sizes MS race way / junction boxes/clamps/hangers for Cable Tray, Light Fixture made out of specified size

sheet/Angle/Flat/rod/ channel etc as per design with all necessary accessories like bend, junction boxes, coupler, Anchor fastener, Bolt Nuts, etc.. & work from

E-58 58 MS structure for other work with anchor fastener of Hilti make and necessary hardware with necessary welding has to be done to complete the job from ISA / kg 200.00 77.77

ISMC / PLATE. The job also includes to paint the structure with two coats of red oxide and two coats color of enamel paint as approved and recommended by

consultant. Complete in all respect to be installed at any height with all necessary arrangements. Contractor has to complete the work up to satisfaction of

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

70 sq.mm x 3.5c Al. XLPE Arm. Cable

E-60 60 50 sq.mm x 3.5c Al. XLPE Arm. Cable mt 20.00 281.79

E-61 61 35 sq.mm x 3.5c Al. XLPE Arm. Cable mt 50.00 217.15

E-62 62 25 sq.mm x 4 c Al. XLPE Arm. Cable mt 50.00 188.87

E-63 63 16 sq.mm x 4 c Al. XLPE Arm. Cable mt 150.00 151.50

E-64 64 10 sq.mm x 4 c Al. XLPE Arm. Cable mt 150.00 138.37

Providing & erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand copper conductor for 1.1 KV. To be laid on wall with necessary clamps or in existing

E-65 65 trench / pipe at road crossing or floor of following size cable. mt 50.00 393.90

6 sq.mm x 3 c cu. XLPE Arm. Cable

Providing & erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand copper conductor for 1.1 KV. To be laid on wall with necessary clamps or in existing

E-66 66 trench / pipe at road crossing or floor of following size cable. mt 100.00 285.83

4 sq.mm x 3 c cu. XLPE Arm. Cable

Supplying & erecting XLPE (IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size

3 core 2.5 Sq.mm.

E-68 68 SITC of 10 Core X 4sq.mm. Cu. multicore Flexible Cable mt 200.00 641.35

Cable Termination

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor armored cables of 1100 volt grade including

supplying and fixing of bimetallic Long neck crimping lugs, double compression type Brass glands with earthing.

70 sq.mm x 3.5c Al. XLPE Arm. Cable

50 sq.mm x 3.5c Al. XLPE Arm. Cable

35 sq.mm x 3.5c Al. XLPE Arm. Cable

25 sq.mm x 4 c Al. XLPE Arm. Cable

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

16 sq.mm x 4 c Al. XLPE Arm. Cable

10 sq.mm x 4 c Al. XLPE Arm. Cable

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor armored cables of 1100 volt grade including

E-75 75 supplying and fixing of bimetallic Long neck crimping lugs, double compression type Brass glands with earthing. no 2.00 56.56

6 sq.mm x 3 c Al. XLPE Arm. Cable

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor armored cables of 1100 volt grade including

E-76 76 supplying and fixing of bimetallic Long neck crimping lugs, double compression type Brass glands with earthing. no 4.00 51.51

4 sq.mm x 3 c Al. XLPE Arm. Cable

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor armored cables of 1100 volt grade including

E-77 77 supplying and fixing of bimetallic Long neck crimping lugs, double compression type Brass glands with earthing. no 2.00 51.51

3 core 2.5 Sq.mm.

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor unarmored cables of 1100 volt grade including

E-78 78 supplying and fixing of bimetallic Long neck crimping lugs, double compression type Brass IP65 glands with earthing. no 4.00 202.00

10 sq.mm x 4c Al. XLPE Un.Arm. Cable

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor unarmored cables of 1100 volt grade including

E-79 79 supplying and fixing of bimetallic Long neck crimping lugs, double compression type Brass IP65 glands with earthing. no 2.00 202.00

4 sq.mm x 10c cu. XLPE Un.Arm. Cable

MV Switchgear & Power Panels

Supply, Unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning main L.T. panel board, fabricated from M.S. sheet

& folded channel totally enclosed cubical type compartmentalized. Scope Covers Unloading at Site, Store in Weather Proof Condition, Shift to the Location

Basement / GF / FF, Grouting, Installation, Testing & Commissioning complete in all respect & As per the instruction of Architect / Consultant / Engineer

Incharge. Scope also covers Co ordination with Panel Manufacturer.

Design, fabrication, assembling, supply, installation , testing of Panels for 415 V, 3 phase, 50 Hz, 4 wire power supply system.

Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form 4b Construction IEC 61439, floor mounted, free

standing and shall be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at the top and the bottom of the panel.

All large panels shall be provided with lifting hooks. Distribution panels shall be fabricated in accordance with the specifications.

Note : Panel vendor has to provide Surge Protection at every stage of the Distribution.

1) Supporting rigid steel framework.

2) Cubicle type, 14 gauge CRCA sheet steel enclosed.

3) Complete with interconnections and distribution bus bars.

4) Proper bonding to earth.

5) Painting/lettering on Breakers and distribution boards, the location they serve, providing on each panel its circuit diagram.

6) Providing cable clamps / supports within distribution boards cable alley.

7) TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link.

8) All MCB’s shall be of minimum 10 KA breaking capacity.

9) The breaking capacity of MCCB’s are mentioned panel wise.

10) All motor feeders MCCBs shall be of motor duty.

11) Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.

12) Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993.

a) IP 52 for indoor panels.

b) IP 54 for Service area panels.

c) IP 65 for outdoor panels.

13) All MCCB’s shall be provided with operating mechanism for door interlock & with the roraty handle.

14) Current density of aluminium shall be 1 sq mm for 0.8 amps for rated current of bus bars and current density of copper shall be 1 sq.mm for 1 amps for rated

current of bus bars.

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

15) Tinned copper earth bus as specified in the BOQ / SLD shall be provided through out the length of each board.

16) All measuring instruments (Meters) shall be of digital electronic with LED of approved make and compatible with BAS.

17) All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire.

18) All panels shall have provision of the following:

a) IP 55 for outdoor panels.

b) Pad locking of MCCB’s handles in “OFF” Position.

19) Additional set of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for BAS including space required for various

transducers in Main Switch Board sections. Only transducers shall be supplied by BAS contractor.

20) All the C.T.s should be auto short link type.

21) All the MCCB's should be with rotary handle.

22) All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic and inductive (motor) load shall be of type “C”

characteristic and discharge lamps and UPS etc. shall be of type D characteristic.

23) All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier formation.

24) All PTs / control transformer shall be provided with centre tap earth secondary.

25) If Any descripancy found in SLD & BOQ, it should be brought in the notice of the Client / Consultant, Client / Consultant's decision will be final in case of

any descripancy.

26) All outdoor panles should be provided with minimum 600mm height fabrication stand with all side 2mm thick M.S. powder coated sheet.

26) G.A. Drawing should be checked & Finalised by consultant before fabrication.

SITC of IP65 Panel for Play Ground

125 amps FP MCCB (16 KA) with following accessories: 1 Sets

i. LED type Phase indicating & ON, OFF light shall be protected by 2 amps SP MCB's. - 5 nos.

ii. 3 Nos. of Digital type 0-500 / 5 amps CTR digital ammeter with 3 nos 125 / 5 amps, 15 VA Class I CT’s.

iii. Digital type 0-500 Volt digital voltmeter with inbuilt selector switch & shall be protected by 2 amp TP MCB’s - 1 no.

iv) Load Manager of Schneider make PM 5110 with RS 485 connectivity with 3 nos. of Class 1, 125 / 5 Amp. CT of 15 VA

125 amps FP Tinned copper bus bars with colored heat shrinkable insulated sleeve.

TVSS (100KA) Ten Mode 330 Series of ASCO Make Unit with 100A FP MCCB as per SLD

63 amps 4 Pole MCB (10 KA) : 2 nos.

32 amps 4 pole MCB ( 10 KA ) : 6 Nos.

6 to 32 amps 2 pole MCB ( 10 KA ): 24 Nos.

Panel should be as per SLD & Specifications

SITC of IP 65 External Area lighting Panel

63 amps FP MCB (16 KA) with following accessories: 1 Sets

LED type Phase indicating & ON, OFF light shall be protected by 2 amps SP MCB's.

3 Nos. of Digital type 0-63 / 5 amps CTR digital ammeter with 3 nos 63 / 5 amps, 15 VA Class I CT’s.

Digital type 0-500 Volt digital voltmeter with inbuilt selector switch & shall be protected by 2 amp TP MCB’s

E-81 81 63 amps FP Tinned copper bus bars with coloured heat shrinkable insulated sleeve. no 1.00 1,66,650.00

TVSS (100KA) Ten Mode 330 Series of ASCO Make Unit with 63A FP MCB as per SLD

40 to 63 amps 4 pole MCB ( 10 KA ) : 6 No.

6 to 32 amps FP 4 pole MCB : 2 no.

40 to FP Contactor : 6 no.

Dual channel Timer : 3 nos.

Panel should be as per SLD

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of co-extruded polycarbonate channel with diffuser part in needed opal finish with company mark/name 160V to 270V, Power Factor more than 0.9, THD

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(ii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

E-83 83 Luminaire efficacy> 85 lumens/watt , no 4.00 220.18

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

E-84 84 Luminaire efficacy> 85 lumens/watt , no 2.00 758.51

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KV

Providing and erecting PVC body surface or pendent mounting LED Bulk type 9 watt Lighting Fitting with electronic driver. And lumen output from luminaire

E-85 85 720lm , input voltage range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver, -20degC to +60degC working temperature, AL frame with Beam Angle no 6.00 787.80

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 &

E-86 86 LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity no 16.00 3,345.12

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.

(i) above 36 to 48 watts

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 &

E-87 87 LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity no 2.00 4,997.48

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.

(ii) above 48 to 60 Watts

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 &

E-88 88 LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity no 36.00 10,818.11

between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.

(vii) above 200 to 250 watts

Street Light Pole

Supplying and erecting approved make Conical Pole (Medium Duty ) Made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot

dip galvanizing as per IS 2629/2633/4759, with required base plate and integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer considering site requirement. The length of poles are as below.

(D) 6 Mtr. Long 70 mm Top X 160 mm bottom dia, 3 mm thickness

Supplying and erecting approved make Conical Pole (Medium Duty ) Made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot

dip galvanizing as per IS 2629/2633/4759, with required base plate and integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile

E-90 90 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable terminations as erected on suitable foundation (included) with no 2.00 14,688.43

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer considering site requirement. The length of poles are as below.

(F) 8 Mtr. Long 70 mm Top X 190 mm bottom dia, 3 mm thickness

Supplying and erecting approved make Conical Pole (Medium Duty ) Made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot

dip galvanizing as per IS 2629/2633/4759, with required base plate and integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile

E-91 91 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable terminations as erected on suitable foundation (included) with no 6.00 19,584.91

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer considering site requirement. The length of poles are as below.

(H) 10 Mtr. Long 80 mm Top X 220 mm bottom dia, 3 mm thickness

Supplying and erecting Street light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing

of approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top having nuts and bolts for fixing the brackets and having spread of 0.5 mtr.

E-92 92 Length with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple with check nut complete painted with one coat.of Red oxide / PU base no 6.00 491.87

primer and two coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 0.5 Mtr

E-93 93 [B] Double Arm Bracket 0.5 Mtr no 1.00 622.16

E-94 94 [C] Three Arm Bracket 0.5 Mtr no 1.00 743.36

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with necessary curing for pole

muffing or any other purpose.

E-96 96 Providing TMT Bar FE 500/500D reinforcement for RCC work including bending, binding and placing in position complete upto floor two level Kg. 360.00 76.21

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

Supplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal

and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as

E-97 97 per para 7.3 of IS 3043 with necessary length of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. no 1.00 7,874.97

G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per

drawing) with following specification

with 60 x 60x 0.315 cms. Copper earth Plate

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per

IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications.

For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation,

SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG

erected & connected as directed (For pole)

Earth wire/strips :

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

E-101 101 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. kg 50.00 794.87

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper

lugs, nuts and bolts if required.

Supplying and Laying mains with 1 no. of 6 sq mm Cu. PVC insulated FRLS flexible wire ( Green Color Only )

SITC of Water Tight Junction Box With necessary clamp for mounting of the J.B. ( All the cable / wire connections to the JB shall be with the Water tight Glands

S.I.T.C. of single phase submersible pump set suitable for 100 mm size or more dia bore well having motor capacity and discharge as under with necessary panel

E-104 104 box. Lifting and Lowering taken extra. no 2.00 18,386.04

(c) Motor rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head suitable for 32 mm dia. delivery pipe

Supplying & erecting approved make Automatic liquid level controller 6A. with sensor testing as per instruction of Engineer in charge on site complete with

wiring connection with existing wires , with copper conductor from pump to upper and lower tank.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following Size.

(C) 3 Core x 4 Sq. mm

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded

by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. ◦

E-108 108 Supplying and erecting water filter cum purifier with ultra violate technology. (Aquaguard / waterdoc model or equivalent symphony/ crystal/videocon model) no 1.00 4,528.84

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete.

For 4.5 Kg Capacity, including maintaining/ renewal validity of all Co2 fire extinguisers up to the completion of O&M period

Supplying rubber matting of following thickness as per IS : 15652/IEC61111

E-111 111 Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS. no 5.00 69.69

E-112 112 Providing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from Electric shock no 5.00 130.29

Tender Rate + 1%

Sr. Total Total

Item No. Description of Work Unit L.C.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories

E-113 113 of same material at required depth for laying of cable. below ground / road surface for enclosing cable and back filling the same to make ground as per original. mt 450.00 62.62

Liason / Follow UP with Supply Co.

Filling the necessary application to supply co. following up and getting the supply filling the necessary test report to the supply co. inclusive. All official fees

including security deposits will be paid by the client and out of pocket expenses shall be of contractor.

1. To get temporary power supply

2. To get the LT/LTMD Connection

3. To get all approval from CEIG and supply company

Total Cost of Electrical Work