Construction of B Type (05 unit) & C type (05 unit) Quarters at Rajpipla, Ta:-Nandod, Dist Narmada

Name of Work : Construction of B Type (05 unit) & C type (05 unit) Quarters at Rajpipla, Ta:-Nandod,

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

No. specifications) Quantity Unit Rate Amount

1 Excavation for foundation up to 1.50 MT depth including sorting out and stacking

of useful materials and disposing the excavated stuff up to 50 mt lead (B) Dense or 1383.00 Cu.M 160.89

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out

and stacking of useful materials and disposing off the excavated stuff upto 1116.00 Cu.M 174.56

50 Meter lead. (B) Dense or Hard soil

3 Filling available excavated Earth (Excluding Rock ) in trench plinth side of

foundation etc. in layer not excluding 20 cm in depth consolidation each deposited 1022.00 Cu.M 137.47

layer by ramming and watering etc. complete

4 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete. 248.00 Cu.M 310.56

5 Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand : 8 B.T. stone

aggregates 40 mm. nominal size) and curing complete excluding cost of from work 90.00 Cu.M 2825.98

in :(a) Foundation and plinth

6 Providing and laying controlled cement concrete M150 for curing complete

including cost of formwork but excluding the cost of reinforcement for reinforced

concrete work in (A) Foundations, footings,Base of columns,Plinth Slab and Mass 118.00 Cu.M 3761.84

7 Providing and laying controlled cement concrete M250 for curing complete

including cost of formwork but excluding the cost of reinforcement for reinforced

concrete work in (A) Foundations, footings,Base of columns and Mass concrete. 230.00 Cu.M 4460.16

8 Providing and laying controlled cement concrete M250 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Column Up to Plinth 30.00 Cu.M 7841.64

9 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars, posts and struts up to floor two level 110.00 Cu.M 7834.57

for Columns For All Floors.

10 Providing and laying controlled cement concrete M250 and curing complete

including the cost of form work but excluding the cost of reinforcement for 50.00 Cu.M 5883.25

reinforced concrete work For Plinth Beams

11 Providing and laying controlled cement concrete M200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 270.00 Cu.M 6215.54

reinforced concrete work in BEAMS For All Floor.

12 Providing and laying controlled cement concrete M200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 132.00 Cum 6508.90

reinforced concrete work for Slab All floors

13 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 50.00 Cu.M 7471.98

reinforced concrete work For Lintels & Sill Level in All Floors

14 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 20.00 Cu.M 6342.80

reinforced concrete work For Chajja in All Floors

15 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in STAIR CASES for All floor

16 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 40.00 Cum 8964.76

reinforced concrete work in Vertical Walls for All Floor

17 Providing TMT bar reinforcement of Fe-500D for R.C.C. work including bending

binding and placing in position complete for All Floor 130488.00 Kg. 78.87

18 Proving & Fixing Chicken mesh for joint between brick work & RCC work fixing

with nail & GI washer as per director in Charge 280.00 Sq.M 74.74

19 Brick work using common burnt clay building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement 7.00 Cu.M 4310.73

: 5 -fine sand)(B) Conventional

20 Brick Work using Common Burnt Clay Building Bricks having crushing strength not

less than 35 Kg/sm. in super structure Above plinth level up to floor two level in

cement mortar (1:6) ( 1 cement : 6 fine sand) (Conventional) For All Floors 237.00 Cu.M 4614.69

21 Half brick masonry in common brunt clay building bricks having crushing strength

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

super structure above plinth up to floor two level Conventional Bricks for All

22 Providing throating or plaster drip and moulding to R.C.C. chhajja by making 5mm

to 15 mm wide groove as per design etc. complete 50.00 Rmt 44.07

23 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

24 Providing 10mm thick cement plaster (mala troweled finish) in single coat on

Celling,& Soffits of Stair, concrete wall for interior plastering finished even and 2550.00 Sq.M 199.98

smooth in (ii) cement mortar 1:3 (1 Cement : 3 Sand) For ALL Floors

25 20 mm thick Sand faced Gutka cement plaster with 1x1 cm grooves as suggested

by this office consisting of 12 mm thick backing coat of C.M. 1:3 ( 1 cement :

coarse sand ) and 8 mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse sand) 1780.00 Sq.M 360.57

for all heights as directed etc. complete.

26 Providing Water proofing Treatment on Sunk Slab including cement concrete

flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating coat of neat cement 326.00 Sq.M 373.70

average 50mm thick to Prepare slope including water proofing chemical etc.

Complete for Sunk Slab All Floor.

27 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. Length for Sunk

Slab or as directed by Engineer in Charge etc complete. 7.00 No 101.91

28 Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & one

coats of primer of approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free from mortar 4910.00 Sq.M 30.44

dropping and other foreign matter and sand papered smooth.

29 Wall painting (three coats) of plastic paint with one wall highlight in special effect

(royal play) colour, shade and colour of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the 2360.00 Sq.M 128.38

surface free from mortar droppings and other foreign matter and sand papered

30 Wall painting (three coats) with plastic emulsion paint of approved brand and

manufacture on ceiling and soffits of slab surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign 2550.00 Sq.M 90.48

matter and sand papered smooth.

31 Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered materials.etc complete 1780.00 Sq.M 122.14

32 Providing and laying 60 x 60 Cm Soluble Salt vitrified 10 mm thick Tiles in flooring

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry including 440.00 Sq.M 1663.47

finised with flush pointing & cleaning the surface etc. complete for light shade

33 Providing and laying Soluble Salt vitrified 10 mm thick tile Tiles in skirting, risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 90.00 Sq.M 830.22

pointing in white cement with white cement slurry

34 Providing and laying Machine Cut free edges, Machine polished Granite Stone slab

18 mm thick single peace For Stair,Steps,landing as per design incl. full moulded

round front edge and 1cm nosing and necessary groove on trade of steps laid on

20 mm thick cement mortar 1:6 (1 -cement : 6 coarse sand ) jointed with grey 60.00 Sq.M 2673.47

cement slurry including rubbing,polishing & Finishing etc. complete

35 Providing and fixing machine cut, free edges, pre mirror polished Grenite stone

slab 18 mm thick (single piece not less than 150 cm ) for vertical

wall/Doors/Windows Sill,Jams for cladding as per design including full moulded

round inside edge and laid on 10 mm thick cement mortar 1:3 ( 1 cement: 3 210.00 Sq.M 2490.66

coarse sand) jointed with grey cement slurry including rubbing and polishing

finishing etc. complete.

36 Providing and fixing 60 x30 CM Machine cut, mirror polished Blue Kotah stone slab

flooring 25 mm thick laid on 20 mm thick cement mortar 1:6 ( 1 cement:6 coarse

sand) jointed with matching pigment & cement slurry including rubbing and 31.00 Sq.M 1189.78

polishing finishing etc. complete.

37 Providing and laying 300 X 300 Matt Ceramic tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 32.00 Sq.M 1017.30

coarse sand ) finishing with flush pointing in white cement.

38 P & L Colour glazed Ceramic tiles size 60 x 30 cm 6 mm thick in skirting risers of

steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and

jointed with colour cement slurry

39 Providing and laying water proofing treatment with china mosaic tiles flooring

over avg 50 mm C.C. 1:2:4 bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece not more than 2.5CM of ceramic /

glazed tiles ( one for more colour as directed ) to be laid over cement mortar

bedding of C M 1:3 (1 cement : 3 sand ) contain water proofing materials per bag

of cement useas specified by manufactured and slops to be tempered to bring 310.00 Sq.M 1164.53

mortar up to surface with using white cement and colour pigment including

rounding of junctions and extending them up to 15 cm along the wall and curing

with bends any patens or design as per drawing and cleaning by using oxalic acid

40 Constructing Sandwich Platform of 18 mm thick Polished Black or selected

Granite at top and 25 mm thick Kota stone slab With 75CM height with necessary

Support using 20mm thick cement mortar 1:3 for sandwich and fitting at bottom &

edges with waterproof rigid adhesives including making necessary grooves in

walls with Vertical support of double Kota stone sandwich every 60 cm centre to 30.00 Sq.M 3671.35

centre including all labour material of approved quality including full moulded

round front edge fixed in wall for partition and jointed with grey cement

slurry including rubbing and polishing etc. complete

41 Providing and fixing Single shutter 35mm Thick door solid core wooden flush

shutter conferming to IS:2202 & ISI approved manufacture, covered with 1 mm

thick laminates on each side of shutter, 6 mm thick polished teak wood beading on

periphaery, 150 mm-200 mm S.S. Handles and S.S. Fixtures & Locking 160.00 Sq.M 5955.97

Arrangement on Each shutter, fixed with 4 Nos. 150 mm High S.S. hinges Complete

as directed by Engineer in charge

42 Providing and fixing jindal E (30 mm) series Three track alluminimum window (3

shutter +1 Mosquito net shutter) standard extureded colour anodized section with

frame having frame bottom member jindal section no:20928 @ wt. of

kg/Rmt, frame side and top member jindal section no.:20837 @ wt. of

Kg/Rmt with sliding shutters of single glass shutter top bottom member Jindal

section no.20993 @ wt.of 0.839 Kg/Rmt & side member jindal section no. 20550 60.00 Sq.M 8115.35

@ wt. of 0.994 Kg/Rmt & inter lock member jindal section no. 20549 @ wt. of

0.809 Kg/Rmt. with 5 mm thick transperent plain float glass in shutter including

fitting, fixtures, rubber gasket and transperent silicon seleant as per drawing and

instruction of engineer in charge etc. completed for Window Three Track

43 Providing and fixing jindal E (30 mm) series Three track alluminimum window (2

shutter + 1 Mosquito net shutter) standard extureded colour anodized section

with frame having frame bottom member jindal section no:20928 @ wt. of

kg/Rmt, frame side and top member jindal section no.:20837 @ wt. of

Kg/Rmt with sliding shutters of single glass shutter top bottom member Jindal

section no.20993 @ wt.of 0.839 Kg/Rmt & side member jindal section no. 20550 20.00 Sq.M 3373.40

@ wt. of 0.994 Kg/Rmt & inter lock member jindal section no. 20549 @ wt. of

0.809 Kg/Rmt. with 5 mm thick transperent plain float glass in shutter including

fitting, fixtures, rubber gasket and transperent silicon seleant as per drawing and

instruction of engineer in charge etc. completed for Window Three Track

44 Providing and fixing in position standared extruded approved colour anodised

aluminum vantilation with outer frame of (Jindal section No. 21458 @ wt

kg/ Rmt ) with 5 mm thick bajari figure adgesteble tinted louvers glass fixed to 20.00 Sq.M 1961.42

alluminimum strip blade including fixtures, fastening, labours and equipments as

per detailed drawing as directed. For ventilation

45 Providing and fixing kitchen platform trolley having three drawers of SS (IS 304) of

required size like partition type in kitchen platform having drawer front side and

backside by using 19mm thick all proof plywood of ISI quality all side laminated

etc. as directed. The size of SS (IS 304) basket of size 4" to 18" for tperforated, 30.00 Sqmt. 12645.20

partition type as directed including necessary S.S. fittings, handles, nobs,

telescopic channels, etc. as directed

46 Providing and fixing 90 cm high Stainless Steel railing made from anticorrosive

grade S.S. pipe of 50 mm dia (16 gauge) as hand rail with S.S. 304 grade baluster of

32 mm dia (16 gauge) as a vertical support fixed in RCC slab / steps of stair at

Mt. c/c including three horizontal S.S. pipes of 16 mm dia (16 Gauge) at equal 100.00 Rmt 2377.54

distance fixed by 16 mm dia (16 Gauge) S.S. pipe with baluster including

accessories as per detailed drawing as directed etc. complete.

47 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

required capacity each with all necessary fittings and connection etc. complete on 30000.00 Liter 3.95

48 Providing, laying and jointing in true line and level 110 diameter U.P.V.C SWR

(Type B) Pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm 240.00 Rmt 897.79

diameter x 149 mm length x 145 mm height at every 2000 mm centre to centre or

shall be concealed in walls as directed including necessary fittings such as bends,

"Y" "T" shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

49 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B Pipe

conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fitting conforming to IS 14735-1999 of approved make for drainage

system pipeline, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using PVC Clamp of the size 160mm dia x 210 mm length x 400.00 Rmt 834.38

196 mm high at every 2000 mm centre to centre or shall be concealed in walls as

directed including necessary fittings such as bends, shoes, tees, etc. including

testing of pipes and joints and jointed with adhesive solvent cement including

cost of all materials (i) 160 mm dia

50 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

51 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and 430.00 Rmt. 148.12

joints and fixing the same with adhesive solvent, including cost of all materials.

52 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and 1020.00 Rmt. 91.84

joints and fixing the same with adhesive solvent, including cost of all materials.

53 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of

following dia. Nominal bore tube fitting and clamps including making good the 30.00 Rmt. 253.82

wall, ceiling, and floor, etc. complete 25 mm dia

54 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of

following dia. Nominal bore tube fitting and clamps including making good the

wall, ceiling, and floor, etc. complete 15 mm dia

55 Providing and fixing S.S. Napkin hanger for Washbasin. 10.00 No 353.50

56 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm

dia. Each 10.00 No 282.16

57 Providing and fixing Health Fauset Heavy duty with hook with fitting 10.00 No 582.03

58 Providing and fixing S.S. Hanger behind the door. 20.00 No 252.50

59 Providing and fixing Gun metal check or non-return full way wheel valve.(D) 50mm

60 Providing and fixing Gun metal check or non-return full way wheel valve.(E) 40mm

61 Providing and fixing Gun metal check or non-return full way wheel valve.(C) 25mm

62 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii)

63 Providing and fixing Water Closet Squatting Pan (Indian Type W.C. Pan) size

580mm Integral Foot Rest Type (A) Vitreous China.(I) Long pattern = White colour

including 100mm size P or S trap for water closet squatting pan including jointing

the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand) 10.00 No 1678.67

with 25mm dia. Chromium plated brass half trun flush cock of approved quality

including fixing in pipe line G.I. inlet connection for flushing W.C. Pan etc.

64 Providing & fixing of first quality (ii) Flat Back washbasin 550 mm x 400mm size. (i)

In white colour. including with approved sanitary grade material with C.P waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of approved brand with 10.00 No 2147.26

connection 15mm dia flexiable pvc pipe etc. complete

65 Providing and fixing screw down bib taps of following size.(B) Brass chromium

plated screws down Bib Tap. (i) 15mm dia.

66 Providing and fixing brass screw down stop tap.(A) 15mm dia. make as approved

by Engineer In Charge. 10.00 No 205.83

67 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

with jali of the following nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and making good the walls.

68 Providing and fixing S.W. Gully trap with C I grating brick masonry chamber and

water tight C I cover with frame of 300 x 300 mm size (inside) with standard 20.00 No 1246.92

weight (i)square mouth traps (C) 150 mm x 100 mm size P or R type

69 Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets fixed to

wooden plugs with C.P. Brass screws, (B) 600mm x 20 mm size 5.00 No 616.42

70 Providing and fixing 600mm x 450mm Bevelled edge glass mirror of superior glass

mounted on 6mm the A.C. sheet or plywood sheet & fixed to wooden plugs with 5.00 No 859.41

C.P. brass screws and washers.

71 Providing and fixing in position PVC cowel went to pipes.(C) 160mm dia 10.00 No 75.75

72 Providing and fixing in position PVC cowel went to pipes.(B) 110mm dia. 10.00 No 50.50

73 Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure

polyethylene pipes of the following outside dia. Low density, complete with special

flange compression type fittings wall clamps etc. including making good the wall, 760.00 Rmt. 339.05

ceiling and floor. (G)110 mm

74 Constructing brick masonry chamber for under ground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I.

Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions, Total

weight of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and

wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand :

graded stone aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster

mm. thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls & abed concrete etc. complete.(ii) Inside dimensions, 500 mm. x

700 mm. and 450 mm. Deep for pipe line with one or two inlets.

75 Applying general insecticide pest control treatment to floors, cupboards etc.

including labour material etc. complete. Using Imidacloprid 30.5 SC As Per IS

part-III (0.075% Concentration by mass) is recommended 10.5 ml chemical dilute 340.00 Sq.M 43.97

with 5 litters of water application 0.5 Litre chemical / Sq.M of surface is

recommended as per I.S

76 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement

mortar in proportion 1:1, salt glazed stone ware pipes including testing of pipes

and joints etc. complete and Providing and laying Cement concrete 1:5:10 (1-

Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for 100.00 Rmt 564.52

stoneware pipes (166mm Ave. bed thickness) of following internal diameters with

necessary formwork and curing complete.(B) 150mm dia.

77 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement

mortar in proportion 1:1, salt glazed stone ware pipes including testing of pipes

and joints etc. complete and Providing and laying Cement concrete 1:5:10 (1-

Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for 400.00 Rmt 352.74

stoneware pipes (166mm Ave. bed thickness) of following internal diameters with

necessary formwork and curing complete.(B) 110mm dia.

78 Providing and laying (to level or slope) and jointing reinforced concrete not

pressure pipes IS class NP 2 of the following internal diameter with collars and nut

ends prepared for collar joints including testing of joints complete 300 mm dia

79 Providing and laying in trenches jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make approved by Engineer In

Charge, including necessary fittings etc. including testing of pipe and joints and 320.00 Rmt 195.67

fixing the same with adhesive solvent, including cost of excavation & refilling the

same with all materials.

80 Providing and fixing Safety Grills of required pattern for windows/door using

16mm x 16 mm square M.S. polished bars, Required at required spacing as per

design and hold fast with coach bolts including one coat of primer and two coats 1570.00 Kg. 116.91

of matt finished oil painting etc. complete.

81 Providing plinth protection to building including excavation in ordinary soil and

laying cement concrete 1:4:8 using stone aggregates of 40mm nominal size in

foundation layer 0.10 mt. thick below pre-cast Rubber Dye inter locking concrete

block 60mm thick with grade of concrete M200 pneumatic compressed by

mechanically pressed and as per approved design including 75mm Sand layer for

levelling and filling the joint with sand in proper line and level etc. complete, 160.00 Sq.M 1313.00

Including Providing and fixing pre-cast concrete kerb stone of grey cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade concrete

as per approved design and including excavation for fixing in proper line and level,

filling the joint with C:M 1:3 (1cement:3fine sand) etc. complete.

82 Providing and fixing kitchen sink painted white with C.I. or M.S. brackets M.I. Fiber

union 32 mm dia. C.P. brass waste 32 mm dia. 15 mm stop cock etc. completed,

including cutting holes in walls and making good the same but excluding fittings, (C 10.00 Nos. 3149.18

) Vitreous China Sink (i) 600 mm X 450 mm X 150 mm Size

83 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block

60mm thick with grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 : 2006 including 761.00 Sqmt. 705.95

35 mm Sand layer for levelling and filling the joint with sand in proper line and

level as per guidlines of IRC : SP 63-2018 etc. Complete.

84 Providing and fixing Kotastone shelves as approved by Engineer In Charge. 86.00 Sq.mt. 220.25

85 Providing and fixing Granite shelves as approved by Engineer In Charge. 4.00 Sq.mt. 3689.55

86 Providing and fixing wooden cupboard frame the skeleton (plywood frame

structure) with 18 mm + 18 mm thick BWR grade plywood for vertical and

horizontal plywood (patti) both side cover with 6 mm + 6 mm thick BWR grade

plywood for grooving as per design. Fixing properly without any air gap and

finishing with selected 4 mm thick imported veneer having melamine polish. 26.00 Sq.mt. 3030.00

Before installation, make hole / face plate for conduit pipes of electrical /

networking cables with openable stud from partition, including all materials and

labour etc. complete as per detail drawing and instruction of Engineer-in-charge.

87 Providing and fixing Collapsible Grills steel shutters with vertical channels 20 x 10 x

2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T

rin 40 X40 X 6 mm with bolts, nuts, locking arrangements, stoppers handles 16.00 Sq.mt. 6221.19

including applying a priming coat of red lead paint.

88 Providing and fixing a sloping polycarbonate canopy over the balcony opening to

provide effective protection from rainwater. The canopy consists of UV-stabilized

translucent polycarbonate sheets fixed on a MS powder-coated / painted frame,

properly anchored to the wall structure with suitable fasteners.The canopy is

installed with a sufficient slope to allow rainwater to drain away, preventing water

from entering the balcony area. All sheets are fixed using self-drilling screws with 36.00 Sq.mt. 2291.69

EPDM rubber washers to ensure watertight joints and prevent leakage.The work

includes cutting, drilling, sealing of joints with silicone sealant, fixing, scaffolding,

labour, tools & tackles and all incidental charges, complete to protect the balcony

from direct rainwater entry and weather exposure.

89 Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed

with hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm 10.00 Sq.M 1441.90

etc complete as directed by Engineer in charge.

90 Steel work, riveted in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A) In beams and

joists, channels angles Tees, flats, with connecting plates or angle cleats as in main 10.00 Quintal 5889.50

and cross beams. Hip and jack rafters, purlins conneted to common rafters and the

91 Providing and fixing post and pipe railing as per detailed drawing including 3 coats

of painting to steel works complete. 17.00 Rmt 1210.38

92 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall 200.00 Rmt. 515.27

ceiling and floor.(G)160 mm

93 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with

excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete including brick

masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick cement

plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS 40.00 Nos. 7329.57

steel and 0.60mx0.45m cast iron manhole cover with frame weight not less than

35 kg as per directed by Engineer-in-charge

94 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m &

excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed concrete of

0.15m thick including brick work in c.m 1:6 for 23cm thick wall including 15mm

thick cement plaster inside & outside with cement slurry & 10cm thick RCC 1:2:4 10.00 Nos. 15246.96

top cover with frame of minimum weight of 35 kg & filling filter material kapchi in

layers (25-40mm & 10-20mm) & BT metal 40mm & sand as per directed by

Engineer-in-charge.

95 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of water logging with

excavation filling the pit with gravel & sand in layers including making 300mm dia

bore depth of 4.5mt & above concrete with kapchi in layers (25-40mm & 10- 4.00 Nos. 9834.37

20mm) & BT metal 40mm & filling brick as directed by Engineer-in-charge.

96 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out

and stacking of useful materials and disposing off the excavated stuff upto 21.00 Cum 187.29

50 Meter lead (B) Dense or Hard soil

97 Brick work using common burnt clay building bricks having crushing strength not

less than 35 Kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement 81.00 Cum 4279.98

: 6 -fine sand) (B) Conventional.

98 Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

99 Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x

850 mm and 450mm deep for pipe lines with three or more inlets.

100 Providing and laying (two level or slopes) and jointing with stiff mixture of Cement

Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes 150mm laying lime

concrete 1:2:4 (1-Lime putty :2-Fine samd : 4-Graded brick aggregates 40mm 50.00 Rmt 803.14

nominal size) bedding for stoneware pipes of following internal diameters with

necessary formwork and curing complete.

101 Earthwork in cutting including preparing the slope and camber andstacking or

utilising the cutting stuff in bank as directed upto 200 Meters from the end of

cutting with all lead and lift.(i) Hard murrum.+ Add extra over item 9 for 35.00 Cum 396.05

conveying and utilising the stuff in bank from end of cutting with all required lead

and lift.(C) Above 400 Meters upto 500 Meters

102 Box cutting the road surface to proper slope and camber for making a base for

road work including removing the excavated stuff with desposing on the road side 323.00 Cum 112.02

slope as directed up to 50 mt. Lead

103 BT Metal 25 to 40 MM & Aggregate 13.2 and down chips & SD including

conveyence + Spreading the stone aggregate for rolling and W.B.M. including

filling the interstices to required camber and gradient (excluding spreading of 97.00 Cum 1153.62

Blindage)(iii) 25mm to 50mm size crushed stone

104 Providing and laying foundation cement concrete 1:3:6 ( 1 cement :3 coarse sand :

6 aggregate 20mm nominal size ) graded concrete and curing complete 65.00 Cum 3925.48

105 Providing and and laying controlled cement concrete M250 and curing etc. comp.

including the cost of form work and reinforcement for R.C.C. work for internal 129.00 Cum 4185.96

106 Compaction and finishing of cement concrete road by tremix process, providing

extra labour charge for tremix ( Vaccum dewatering service ) process on cement

concrete road surface by using vaccum dewatering pump floater surface vibrator

including making groove 5mm width and filling with polyvynile polymer and rough 645.00 Sqm. 81.81

finish to surface as per instruction including leveling etc. complete.

107 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with

collars for culverts including setting and joining the pipes in C.M. 1:2 watering and

laying (To level of slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated 150.00 Rmt 1095.18

technology of following internal diameter. (i) 300 mm dia.

108 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete

block 30cm length,30cm height and 15cm thick of M200 grade concret as per

approved design and including excavation for fixing in proper line and level,filling 250.00 Rmt 413.84

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

109 Supply, installation, testing and commissioning of ABC type 6 kg confirm to

IS:15683, with ISI marked / TAC approved fitted with required 10.00 Nos 3030.00

accessories including wall suspension brackets.

110 FIRE EXTINGUISHER

Supply, installation, testing and commissioning of Carbon Dioxide (CO2) type Fire

Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC approved fitted

with required accessories including wall suspension brackets.

111 Supply, installation, testing and commissioning of Modular ABC type 5 kg

confirm to IS:15683, with ISI marked / TAC approved fitted with required 10.00 Nos 3535.00

accessories including wall suspension brackets.

112(a) Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with 257.00 Pt. 485.81

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat-III

(b) Light Point for Toilet & Bath Cat-III 30.00 Pt. 242.91

113 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate modules 62.00 Pt. 674.68

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Ca-III

114(a) Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected with following type 65.00 Pt. 510.05

of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete.Cat-III

114(b) [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

board.(f) with medium class Rigid PVC pipe and accessories erected concealed in 40.00 Pt. 745.38

wall/ceiling complete.Cat-III

115 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with 80.00 Pt. 257.55

following type accessories. Ca-III

116(a) Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per 10.00 Nos. 160.59

site situation directed by Engineer In charge.(4) TV Co-axial Socket outlet .Cat-III

116(b) (7) Blank Plate Single.Cat-III 104.00 Nos. 25.25

116(c) (8) Computer RJ-45 socket Ca-III 25.00 Nos. 160.59

116(d) (9) 16 Amp. SP one way switch.Cat-III 10.00 Nos. 180.79

116(e) (10) 6/16Amp. Universal socket Ca-III 25.00 Nos. 199.98

116(f) (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch.Cat-III 15.00 Nos. 410.06

117 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes,

in approved manner as directed. (b) 25 mm

118 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size. (a) with

medium class Rigid PVC pipe and accessories.(b) 2 wire 2.5 sq. mm

119(a) Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire 500.00 Mtr. 112.11

of green colour for earth continuity of following size (a) with medium class Rigid

PVC pipe and accessories (a) 2 wire 4 sq. mm

120 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to be erected as directed.(e) 1.50 Sq.mm 120.00 Mtr. 46.46

3 core round PVC sheathed

121 Providing & Erecting approved make following size of TV Co-axial flexible cable

comprising inner conductor of solid bare copper insulated with Foam PE &

Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation.(b) RG-6

122 Supplying & erecting approved make LAN cable of following size in existing pipe as

per direction. [C] CAT - 6 300.00 Mtr. 47.47

123 Providing & erecting Switch board for Computer or electric apparatus consisting

of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections

as directed. 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch, 3 nos.

6A 5 pin Plug [B] For Modular Type Accessories Ca-III

124 Decorative call bell Ting-tong box type 250 volts complete erected 10.00 Nos. 71.71

125 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K

to 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 % (fitting 210.00 Nos. 535.30

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with integral driver. (v)

Watts, Surge-2 KV, IP-20, conventional 4 feet Ca-III

126 Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built,

surge,protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 57.00 Nos. 112.11

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable

LAMP holder. (ii) 8 watts Cat-III

127(a) Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt 28.00 Nos. 4997.48

. LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)(A)

Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (ii) above 48 to 60 Watts Cat-III

127(b) (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal block.IP 65 (b) 40 W Ca-III

128 Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to

25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. 4.00 Nos. 6790.43

supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.ICS=100% of ICU only.Cat III

129 Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 4.00 Nos. 16221.61

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S.housing Cat III

130 Providing and erecting busbar chamber confirming to IS-375 fabricated from

G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and

necessary busbar supports with COPPER busbar having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulation tape for phase sequence, three phase & neutral each suitable for

following current capacity with necessary painting mounted on wall or pedestal

frame of required size with necessary connections.(B) Suitable for 200 Amp.

131 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity, 1.00 Rn.Mtr 3202.71

erected with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections.(B) Suitable for

200 Amp. capacity

132 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and

having breaking capacity 10 KA to be erected in existing box. confirming to IS 30.00 Nos. 270.68

8828/1996 with ISI Mark.Cat-III

133 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 96.00 Nos. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Ca-III

134 Providing & erecting 240 V MCB double pole switch for motor & inductive load

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 10.00 Nos. 330.27

having following capacity.(B) 40 Amp.Cat-III

135(a) Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 18.00 Nos. 278.76

following capacity.(A) 6 to 32 Amp.Cat-III

135(b) (B) 40 Amp. Ca-III 2.00 Nos. 295.93

136 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

10KA breaking capacity & confirms to IS :8828 in existing box having following 6.00 Nos. 638.32

capacity.(b) 40 Amp. Ca-III

137 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having 8.00 Nos. 668.62

following capacity.(b)40 Amp. Cat-III

138 Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos.

MCB 6.00 Nos. 108.07

139 Sheets steel powder coated enclosure suitable for incorporating One/Two nos.

140 Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for 12.00 Nos. 1492.78

(A) single phase incoming and horizontal single phase outgoing. (b) sheet steel

double door (IP-43) (iv)12 way

141 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic component.

for following Max. rating erected as directed. (i) 25 Amps.DP.Cat-III

142 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 120.00 Kg 77.77

143 Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit complete with necessary 22.00 Nos. 368.65

8 SWG earth wire.

144 For using salt and charcoal / coke as required for pipe type earthing. 22.00 Nos. 171.70

145 Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted. (a) For Electrical Installation up to 440V in normal

soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

146 Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection

as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley as per requirements

& instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal onnection, danger notice board,necessary

ventilation, earthing strip complete. The Panel shall be painted with epoxy

powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved 0.00 0.00

manufacturers with following size.(A) locally fabricated panel board.(i) with

147 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(B) 3 1/2 core 35 Sq. mm ( 16 Sq.

148 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (b) 4 core 6 Sq. mm

149 Making trench in soft soil of suitable width of 90 cm deep for laying cable or

locating the fault all over the run and back filling the same and making the surface 400.00 Mtr. 55.55

as normal ground.

150 Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for laying of cable. below 420.00 Mtr. 62.62

ground / road surface for enclosing cable (A) 50 mm Outer dia

151 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for

PVC insulated armoured cable complete with out going tails, insulating tape etc for 44.00 Nos. 38.38

following size of cables.(c) 2 to 4 core 6 Sq. mm

152 Providing and, fixing heavy duty flange type brass double compression type cable

gland with rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.(B) 3 & 1/2 core 35/50 Sq. mm 4.00 Nos. 75.75

153(a) Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.(A) 1.5/ 176.00 Nos. 6.06

154 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with , canopy & 30 cm. down rod 62.00 Nos. 1948.29

erected with earthing.(Make shall be approved by Engineer in charge))

155 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down

rod erected duly painted for fan complete with proper insulation without leakage 62.00 Mtr. 108.07

156 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in Ceiling with necessary

157 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

158 Supplying & erecting approved make low noise decorative exhaust fan having

square frame ABS body with inbuilt lowers & square frame. 200mm with 1350 10.00 Nos. 1366.53

RPM Cat.II Ca-II

159 Providing recess in wall or window frame suitable for erection of Exhaust fan

complete with plastering and colour washing to match the colour of the wall or

window c0omplete with expanded metal in order to render the fitting in accessible 10.00 Nos. 189.88

and the room water-proof.

160 Supplying and erecting approved make Octagonal pole made from HR sheet steel.

The pole should be made as per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement

for cable termination to be erected With Suitable foundation (Included) as per

details given by manufacturer considering site requirement. (D) 6 Mtr. Long

mm Top X 135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts .Approx Pole

161 Supplying & erecting approved make SMC press moulded composite FRP. loop-

in, loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts, bolts & washers 2.00 Nos. 476.72

suitable for erection on pole with cable clamps& earth bolt of following size of

box. (c)150mm x 125mm x 100mm [deep]

162(a) Supplying and erecting Street light pole bracket comprising main B Class GI pipe of

4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top

having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length

with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple 12.00 Nos. 491.87

with check nut complete painted with one coat.of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single

Arm bracket 0.5 Mtr

162(b) [B] Double Arm Bracket 0.5 Mtr 8.00 Nos. 622.16

163 Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel

of following capacity for switch On-Off street lights on time scheduling basis made

from 16G CRCA sheet duly epoxy power painted inside and outside with hinged

doors and locking arrangement consisting of suitable size of 4 Pole MCB and 4 pole 2.00 Nos. 12399.77

contactor (cat-III)with analog time switch, auto manual switch of same make and

suitable input and output Bakelite terminals and with door earthing approved by

Engineer in charge.(A) 32 Amp

164 Supplying and erecting approved make panel mounting type Digital Voltmeter

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

board with all connection, wiring etc .with manufacturers calibration certificate.

165 Supplying and erecting approved make panel mounting type Digital Ammeter

having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing panel board with all 2.00 Nos. 1558.43

connection, wiring etc .with manufacturers calibration certificate.

166 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC

Supply 500 V on existing panel board with necessary connections. 4.00 Nos. 317.14

167 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA box duly secured with insulating 6.00 Nos. 274.72

materials connected to the meter

168 Supplying and erecting approved make suitable panel indicator LED type lamp,

lens cover, complete erected with necessary connections. 6.00 Nos. 43.43

169 Providing & erecting open well horizontal mono block pump set with cast iron

body, complete for three phase submersible motor having.[D] For 5 HP 3 phase

open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 4.00 Nos. 18746.61

10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe.Cat.II

170 Supplying & erecting approved make motor control cubical panel [Star delta]

made from 16G CRCA sheet duly epoxy powder painted inside and outside with

hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty)

main fuses. Digital volt and current meter (in a single unit) with micro controller

based control unit and current sensing single phasing preventer electronic

overload protection, over voltage (Programmable) protection and under voltage

(Programmable) protection, prod less dry run protection programming facility for 4.00 Nos. 7250.79

setting of all parameter like overload current, high voltage limit, low voltage limit,

dry run limit with digital indication on seven segment LED display for any fault like

over load, high voltage, low voltage, dry running single crimped, electronic star

delta timer, feather touch start / stop push buttons to be erected on angle iron

frame. Grouted on wall the contactors will be of L& T, Siemens, BCH make only)(A)

DOL up to 5.0 H.P.

171 Lowering of submersible motor pump set at the depth of following ,complete with

required. Nos. and size of casing pipes erected by means of proper chain pulley

block & pipe wrenches after checking of threads of each pipe with coupling to take

the load of the pump set and pipe assembly filled up with water (D)For Open well 4.00 Nos. 856.48

Horizontal submersible pump set for sump well (i) 1 HP to 5 HP

172 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of following Size.(B) 3 Core x 2.5 Sq. 60.00 Mtr. 104.03

173 Supplying of following size of HEAVY UPVC column pipe with coupler and wire

lock.[B] 50 mm dia

In Word : Three Crore Forty-Seven Lakh Sixty-Eight Thousand Eight Hundred Twelve Rupees and Ninety-Three Paise Only.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned

above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no

extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all

5 The amount of dismentalled credit materials at Rs. 0 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved From

the Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Rajpipla (R&B) Sub Division Rajpipla (R&B) Division

Rajpipla Rajpipla