Road

as per Brief Description of Qty. of Frequency @ which test shall be Total Nos of test to be

Schedule materials to be tested. Materials carried out taken

Rubble *Gradation test 1 to 100 - cum. 1 test

*Impact Value 100 to 500 - cum. 3 test

*Flakiness Index of 500 to 1500 - cum. 5 test

1500 to 5000 - cum. 7 test

26.5 to 53 B.T.Metal 183.67 *Gradation test 1 to 100 - cum. 1 test

*Impact Value 100 to 500 - cum. 3 test

*Flakiness Index of 500 to 1500 - cum. 5 test

1500 to 5000 - cum. 7 test

45 to 63 M.C.Metal *Gradation test 1 to 100 - cum. 1 test

*Impact Value 100 to 500 - cum. 3 test

*Flakiness Index of 500 to 1500 - cum. 5 test

1500 to 5000 - cum. 7 test

Kapchi *Gradation test 1 to 100 - cum. 1 test

*Impact Value 100 to 500 - cum. 3 test

*Flakiness Index of 500 to 1500 - cum. 5 test

1500 to 5000 - cum. 7 test

Grit 0.00 *Stripping Value As above

stone dust 104.95 *P.I.Value As above

Supplying of Quarry 78.00 *Silt Content As above

Water - chemical Analysis 1 Test for each Source

Sand 314.66 *Gradation, FM, SC One Test per every 200 Cmt.

Asphalt 0.000 *Penetration Test Tanker test in Geri Lab. Only

M.T. as per I.S. 1203 Up to 10

Above 50 one per Tanker

Ductility Test As per I.S.

Specification Gravity testAs per I.S.

Softening point test As per I.S.

Viscocity test As per I.S.

Quality of binder test 3 test per 2 tankers on plant site.

Bricks 0.00 *Water absorption 1 test @ 50,000 Bricks

*Strength Comprehensive

Cement 192.052 *Consistency 1 test @ 50.0 M.T. 100 T 2 tests,

M.T. *Setting time 200 T 3 tests, 300 T 4 tests, 500 T 5 tests,

*Compressive Strength. 800 T 6 tests, 1300 T 7 tests & 8 testd

for large consingment.

Steel 0.000 *Tensile, (TMT) As per Manual of Quality Control

TMT Yield 1 test/40 tonnes / per category

1 Test Per Category

0.00 *Elongation

HYSD Yield 1 test/40 tonnes / per category

C.C.Cube Test 1:2:4 Cmt *Compressive Strength. 1 to 5 cmt - 1 No

M100 20 to 50 cmt - 4 No

M150 51 to above - 4 +1 additional

sample for each 50 cu.mt. Or part

The contractor shall have to pay 1% of the estimate cost put to tender towards all testing of materials & the same shall be duducted from their

bills for the work. The testing of various materials shall be carried out in GERI and result received shall be binding to all i.e. the contractor and

Testing charges of GERI shall be born by Govt. No refund be made not extra charges over 1% shall be recoverable from the contractor.

Signature of Contractor. Deputy Executive Engineer

R&B (P) Sub Division,