Construction I.T.I building Baroti at Tadda in Tehsil Dharampur Distt. Mandi (H.P.)

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification 2014 clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. A recovery of useful stone for 2603.82cum (two thousand six hundred three decimal eight two) cubic metre @ Rs. 300/- (Rupees Three hundred only) per cubic metre shall be effected on pro-rata basis in each running bill from this item. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks, chiseling/wedging out of rocks (where blasting is prohibited) as per drawings and technical specification clause 305.1 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MORD Technical Specification 2014 Clause 301.5 including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

In foundation,footings bases of columns etcetera and mass concrete.

In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platform and the like floor upto any thickness upto all floor levels.

In columns, pillars posts and struts square rectangular or polygonal in plan up to all floor levls

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels

Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses plinth and string courses and the like in all floor heights.

Stair Case with sloping or stepped soffits excluding landing except spiral stair upto all floor level.

Providing and laying in position cement concrete of specified grade mechanically mixed and vibrated cement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specification and curing complete but excluding cost of form work in all work up to plinth level including all heights/depths including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:6:12 (One cement:six sand : twelve graded crushed stone aggregate 40( forty )millimetre nominal size and curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying mechanically mixed 1:5:10 (one cement :five coarse sand : ten) graded crushed stone aggregate 40 mm(forty millimetres) nominal size cement concrete in retaining walls, return walls, walls (any thickness) up to all floor height excluding the cost of centering, shuttering and finishing in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Mechanically mixed and vibrated plain cement concrete M-10 (ten) graded crushed stone aggregate 40 mm (forty millimetre) nominal size) in open foundations and plinths or similar works complete as per drawings and MORD technical specification 2014 for rural roads clause 802, 803, 1202 and 1203 and curing complete including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing weep holes in brick masonry/stone masonry, plain / reinforced concrete abutment, wing walls, return walls, retaining walls and Breast walls with 110mm (One hundred ten millimeter) diameter PVC Pipe made of D-plast finolex having working pressure not less than 4.50 Kg P/Sq cm (four point five Killogramme per Square centimetres) extending through the full width of structures with slope of 1 one (Vertical) : 20 ( Twenty) (Horizontal) towards drawing face complete up to all height as per drawing and technical specifications clauses 614, 709, 1204.3.7 including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Reinforced cement concrete mechnically mixed vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix and curring complete, all work up to plinth level excluding the cost of centering, shuttering, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Reinforced cement concrete mechnically mixed vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix and curring complete, for attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level to all floor levels excluding cost of centring shuttering finishing including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Reinforced cement concrete mechnically mixed and vibrated in reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen) Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement M-25 cement concret work obtain minium crushing strenght of 25 N/mm2 ( Twenty three) Newton per millimetre square)with minium cement contents of 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix, upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Mild steel and Medium Tensile steel bars Fe 500D made of SAIL,TISCO, TATA, JINDAL, RINL, PANTHER & (JSPL) Shyam steel for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding including the cost of binding bars all complete upto plinth level including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Mild steel and Medium Tensile steel bars Fe 500D made of SAIL,TISCO, TATA, JINDAL, RINL, PANTHER & (JSPL) Shyam steel for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding including the cost of binding bars all complete above plinth level upto all floor levels including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) in superstructure above plinth level upto all floor level in all shapes and size in cement mortar 1:6 (one cement : six coarse sand) curing complete including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to all floor level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be madefor seperately). including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : Twelve graded stone aggregate 20(Twenty) Millimetres nominal size) with Cement Mortar 1:6( One cement: Six sand) and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Stone filling /Soling under floors tightly hand packed upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and MORD technical specifications 2014 as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 35mm ( Thirty five ) millimetres thick ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type ,core of block board construction with frame Ist class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing peepholes, ISI including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal size aaluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 200x10 mm ( two hundred into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 125mm (one hundred twenty five millimetres) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 250x16 mm ( two hundred fifty into sixteen millimetre) ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing ISI marked oxidised M.S. tower bolt, stainless steel tower bolt (Barrel type) with necessary screws etc.complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

250X10 mm ( two hundred fifty into ten millimetre)

200x10 mm ( two hundred into ten millimetre)

150x10 mm (One hundred fifty into ten millimetre)

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etcetra complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

125 mm (one hundred twenty five millimetre)

100 mm (one hundred millimetre)

75 mm ( seventy five millimetre)

Providing and fixing 19mm thick ( ninteen milimetre) made of action teasa terramite resistant water proof commercial board box including shelves and shutters, the back side of cupboard/ cabinet of 8mm(Eight milimetre) thick ply and cut portions of shelves shall be finished with 6mm six milimetres) hard board edging. The cut portion of shutters from all the sides shall be finished with 12 mm thick hard wood edging. the shutters from out side shall be finished with 1mm thick laminated of approved shade includng piano hinges and magnetic catcher with all ascessories complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Mild Steel grills of required pattern on wooden/steel frames of windows etcetera with mild steel flats square or round bars with round headed bolts and nuts or by screws/welding in plain grill as per direction by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing bright finished brass 100 mm ( one hundred millimetre)mortice latch and lock, ISI marked, with six levers and a pair of stainless steel lever handles ofapproved quality with necessary screws etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing AISI-Grade stainless steel hanging type floor door stopper ISI marked (anodic coating not less than grade AC10 (ten) as per IS:1868) transparent and dyed to required colour and shade with necessary screws etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing bright finished D type pull handles ISI marked in stainless steel with screws etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing wall panelling of 12mm (twelve millimetre) thick water proof termite resitant plywood with 4mm thick vineer of approved brand of Novapan, Kitply, National, Archidply, Action Tesa, Green make soft wood frames fixing with rawl plugs on wooden pegs and screwed and showing 8mm (eight millimetre) wide and12mm (twelve mlimetre) deep grooves of required pattern in elevation and finished teak wood beading out of 25x12mm (twenty five into twelve millimetre)/cornish out of 75x60mm (seventy five into sixty milimetre) of different pattern in top middle and corner joints including polishing and painting groove complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing wooden slats 2440x128x16 mm made of M.D.F. backed Accustical Fleece to be installed with15mm G.I. & lock in clip on the back of tounge and groove system to be installed with 2400x50mm web flanges 15 &50 mm fully with backing of 50mm thick above Absorb Acoustice/ Proland/ Armstrongbelow 190 cemtimetre height plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 19mm x19mm & 12X12mm MS solid square bar (ballusters) with MS flat of 37.5mmx5mm size complete with priming coat of red lead paint complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 75mmx625mm rounded hand rails in straight lenth complete in 1st class indian teak wood including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 50 mm thick insulating board of DEXUNE / HIMALAYAN in combination on aphony fibertte 600x600x15mm tiles ceiling of approved quality with120x60cm & 12mm thick ply finished with 4mm vennner Rai wood border including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Provding and fixing roll formed hot dipped galvanized steel frame at ceiling including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing Accoustic wood wool desigener tiles in combination with calcim silicate ceiling tiles of size 600x600 mm.with G.I. frame work 600mm C/C grid suspended from roof, including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 600x600 mm, and 0.5 mm thick with 8 mm drop; made of Kajaria, Nitco,Somany,Orient, RAK, Jonshan & Jonshan G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated ofthickness 60 microns (minimum), including factory painted after bending including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying antiskid vitrified floor tiles of size 600x600 (Six hundred into six hundred millimeters) with water absorption less than 0.08% and conforming to IS: 15622, of approved make Somany/Kajaria/Nitco /Orient RAK, Johnson & Johnson) in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three killogramme per square meters) including grouting the joints with white cement and matching pigments etc., complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, slurry, but excluding the cost of nosing of steps etc. complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Ironite flooring 12 mm (average) shell be laid over cement concrete with cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm (three hundred into three hundred into nine point eight millimeters) having with water absorption less than 0.5% and conforming to IS: 15622 of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm (twenty millimeter) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. andd curing complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying 8 mm (eight millimetre) HDF laminated wooden flooring with GREEN PLY/ ACTION TESA / ITS EQUIVALENT including fixing with iron screws complete with :laid over cement concrete flooring (to be paid separately) complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying digital ceremic glazed tiles 10mm (ten millimeter) thick of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in flooring (300x600x10mm size)( three hundred into six hundred into ten millimeter) treads of steps 1.50m (one point five zero metre) high tiles in dada. Laid on a bed of 12mm. (twelve millimetre)Thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement complete upto all floor level l including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 80mm (Eighty millimetre) heavy duty precast cement concrete interlocking paver blocks manufactured by the help of Hydro vibratory machine having compressive strength of M-30 (M-thirty) grade as per IS-15658-2006. of N.T.C. ( National Tile Corporation) GICO ,NITCO make including border or curve block grey or coloured. The paver shall be laid on 30mm (Thirty millimetre) sand filling compacte complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying black finished Granite stone flooring of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in design and pattern, in landing of stair as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (twenty millimetre)(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete upto all floor level as specified and as directed by the Engineer-in-Charge Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying digital glazed floor tiles of size 300x600 mm (three hundred into six hundred millimetre)of NITCO/AGL TILES or more of 1st quality conforming to IS : 15622, of approved make, in colours etc., complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing prepainted sandwich made of tata dura shine puffed roofing with top skin of 0.60 (Zero point six zero) millimetres thick sheet over steel trusses made of cold rolled steel coil with epoxy coating of 25(twenty five) micron having a puff depth of 50 mm (fifty millimetre) and weight of puff 35-37 (thirty five to thirty seven) steel frames are to be painted of approved shade i/c fixing with screws prepainted iron J or L hooks, bolts and nuts with prepainted limpet and rubber washers complete with all accesories as required including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing ridges or hips 60cm (sixty centimetre)overall with 0.60mm(zero point six zero) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20(twenty) microns over 5 (five)microns primer coating + bck coat of polyster of 5 (five)microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted G.I limpet and bitmen washers complete with all accessories as including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 30(Thirty) Centimetres wide 45 (Foryt five) Centimetres overall semicircular 0.63 (Zero point six three)millimetres thick plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing M.S. BP Sheet 1.66 mm to 2.00 mm (One point six six to two Millimetres) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the direction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely). including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying cement water proofing treatment with Dr. FIXIT FAST FLEX of equivalent 6-7sqm/kg (six desh seven square meter oblique kilogramme) with two component polymer modified comentitious coating consisting of comentitious power and a polimer liquid in two coats for 1st coat clean and salutae surface and then applying a coat of Dr. FIXIT and the same process shall be extended upto 300 mm (three hundred millimeter) vertically the second coat shall be applied in opposite direction after four to six hours of application of firstly coat than sprinkle sand on top surface of applied Dr. FIXIT then apply cement mortar 1:4 ( one cement : four sand) and admixed with 200 ml (two hundred)milliliter of pidiproof LW @ 200 ml ( two hundred) per 50 kg (fifty kilogramme) milliliter bag complete as per architect drawing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing on wall face unplasticised Rigid PVC 110mm ( one hundred ten milimetre ) (Finolex/Supreme confirming to IS 13592) for rain water pipes of working pressure not less than 4.00 kg/square centimetre ( four point zero zero kilogram per square centimetre ) including filling the joints with approved adhesive complete upto all floor level in all heights including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid uPVC rain water pipes Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals.

110mm (One hundred ten millimetres) nominal size PVC bend

110mm (One hundred ten millimetres) nominal size PVC Shoe

Providing and fixing 110 mm ( one hundred ten millimetre) unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre)hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete upto all heights complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 75 mm (Seventy five millimetres) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 110 mm (One hundred ten millimetres) high pressure uPVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Steel work welded in built up sections made of TATA ,in grating, framed guard bars ladders, railing brackets and similar works , including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Structural steel work riveted, bolted or welded in built up sections made of TATA, Trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. upto all floor level in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Steel work in built up tubular sections made of TATA(round, square or rectangular hollow pipes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete upto all floor level in all heightscomplete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. .

Providing and fixing angle iron, doors, windows, clerestory windows frames frames made of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog (Rajpura) manufacturedfrom MS angle iron section of 40 x 40 x 5 mm thickness including hinges, jambs, lock jambs, beed and if required angle thrashold of mild steel angle 50x4 mm ( forty into four milliMetre) welded or rigidly fixed by mechanical means lugs with split end tails to each jambs including steel butt hinges 2.5 mm ( two point five milliMetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel priming after pretreatment of the surface complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing work standard steel section doors, windows and clerestory window manufactured from ISMC Channel section 75x40mm (seventy five into forty millimetre)with MS Flat 75x4mm(seventy five into four millimetre) in combination including hinges, jambs, lock jamb,beed, lugs with split end tails to each jambs including steel butt hinges 2.5mm(two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing glass pane shutter in Z- section using clear glass panel 4mm thick for doors, windows and clearestory windows including metal beading of approved quality and shape section with necessary steel screws inluding applying a priming coat of red lead paint complete as per approved specification / design.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Structural glazings fabricated from roll formed sections made of galvanized colour coated steel with a combination of specially designer components made up of crca with zinc phosphate in NCL. Scecolar/Exilir or Equivalent. Required Stiffeners shall be inserted to take care of wind load. A specially Designed Glass Holding section will take care of wight of the glass. Silicon will be applied to arrest water leakeges. The vertical section should be of 50mm X 100mm X 0.72 mm, (fifty into one hundred into zero point seven two millimetre) 33mm X 58mm X 0.72mm (thirty three into fifty eight into zero point seven two millimetre)for frame Horizontal section, Stiffener section should be 48mm X 98mm X 1mm (forty eight into ninety eight into one millimetre), Cover profiles sections should be of 20mm X 58mm X 0.58mm(twenty into fifty eight into zero point five eight millimetre), Glass holding section should be of 37mm X 37mm & 37mm X 18mm (thirty seven into thirty seven into thirty seven into eighteen millimetre) . Including 5mm (five millimetre)thick. Ocean blue Reflective glass. Brackets made of crca powder Coated/Electroplated should be used to connect vertical to horizontal, Vertical to slab, to fix verticals at top & bottom as per site requirement.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Hollow metal Door leaf fire rated Doors confirming to BS 476(four hundred seventy six) part 20 & 22 (twenty and twenty two), IS 3614 part-1 (one) & part-2(two) for stability and integrity with pressed galvanized steel confirming to IS 277 with doors tesyed at CBRI/ NABL Approved lab for maximum rating of 2(two)HRS tested glass used for vision panels to be supported by certificates confirming the required fire tatings/ panels being a part of the fire door assembly. The doors should be finished in thermosetting powder coating desiredral shades and fire coating primer with VOC content for flat: <50G/1, non flat: <150 G/L. All Hardware should pass european certificate "CE" of conformity / UL with required fire rating. Door frame shall be double rebate profile of minimum size 154 mm X 77 mm (one hundred fifty four into seventy seven millimetre) made out of min 1.50 X 77(one point five zero into seventy seven) frame shall be butt jointed and field assembled with self bolted. All provision should be mortised, drilled and trpped for receiving Appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf shall be minimum 49 mm (Forty nine millimetre) thick fully flush double skin door with or without visionlite. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( One cement :three sand) upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

6 mm (Six millimetre) thick cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams upto all floor level and curing copmplete, including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

15mm (fifteen) millimetres Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth cement mortar 1:3(One cement :three sand) upto all floor level in all heights and curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Finishing with Deluxe Multi Surface Paint system for interior or exteriors using primer as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over (at the rate zero point nine zero liters per ten square metres) an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate zero point eight zero liters per ten square metres) of approved brand and manufacture including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and Applying painting one or more coats of oil type wood preservative of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make on new wood surgace after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine liters per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five liters per ten square metre) of approved brand and manufacture of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make including cleaning of all dirt, dust and other foreign matter sand papering and stopping complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Finishing walls with Two or more coat applied @ 3.84 Kg/10 sqm (three point eight four kilograme per ten square metre) of required shade preparation of surface, etc. complete on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Finishing withTwo or more coats applied on walls @ 1.25 ltr/10 sqm (at the rate one point two five liters per ten square metres) over and including one coat of special primer applied @ 0.75 ltr /10 sqm premium acrylic washable emulsion paint of approved shade of asian paint / Nerolac paint Dulux paint system for interiors and exteriors using Primer as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar make including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Governmen

Distempering with Synthetic/Acrylic distemper of asian paint / Nerolac of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

White washing with lime on undecorated wall surfaces two coats to give and even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign mattercomplete upto all floor level in all heightscomplete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. ..

Providing and applying white cement based putty of average thickness 1 mm (one millimetres) of approved brand and manufacturer JK wall putty/ Birla white Putty make over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 1st quality GRC/Unistone wall cladding conforming to IS:15622 of approved make in all colours and shades except burgundy, bottle green black of approved size by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (one cement : three sand)and jointing with grey cement slurry @ 3.3 kg per sqm. including pointing in white cement mixed with pigment of matching shade complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing heigh pressure laminate 10mm (Ten millimetres) thick with fire resistante , chemical resistante, boiling water resistante, environment - friendly green dna with no urea content is to be installed with stainless steel fitting including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Making plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) over 75 mm(seventy five millimetres) thick bed of dry brick bllast 40 mm(forty millimetres) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and derssing and finishing the top smooth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Constructing Coursed rubble hammer dressed 'U' shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter ) in cement mortar 1:6 ( One Cement : Six approved Sand) and inside plastering with cement mortar 1:3 (One Cement: Three approved Sand) including earth work and laying 10 cm (Ten Centimatre ) cement concrete in 1:5:10 (One Cement : Five approved Sand : Ten graded crushed stone aggregate) of 40 mm (Forty millimetres) nominal size and 7.5 cm (seven Point Five Centimatre ) cement concrete 1:2:4 (One Cement : Two approved Sand : Four graded crushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing & fixing on wall the black board of 210 x 110 cm (two hudred ten into one hundred ten centimetre)clear size made of pre laminated phenol bounded partical board 12mm (twelve millimetre) thick and 6mm(six millimetre) thick frosted glass fixed over board with wooden beading inside and bottom as per architactural drawing on 27 job no CZ-160 i/c painting the board and inner side of frosted glass with green paint and fitting the same on walls complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Loosining of the groundup to alevel of 300 mm (three hundred millimetre)below the subgradelevel, watered graded and compacted in layaers to meet requirement of table 300.1 and 300.2 for subgrade construction as per technical specification clause 303.5.2 and including entire carriage of material with in all leads and lifts and as per drawings and MORD technical specifications 2014 as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Construction of granular sub base by providing well graded materials grading -1 spreading in uniforms layers with tractor motor grader on prepared surface, mixing by mix in place method with rotvator at OMC, and compacting with wheel roller of 80 to 100 KN ( eighty into hundred) static roller to achieve the desired denisty, complete as per MORD technical specification 2014 Clause 402 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN ( eighty into hundred ) static roller weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetra as per Tables 400.11 and 400.12 and MORD Technical Specification 2014 Clause 406 by mechnical means including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performanec of this contract.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and applying priming coat with bitumen Emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70 to 1.00kg/sqm (Zero point seven zero to one point zero kilogram per square metre ) using mechanical means as per MODR Technical Specification 2014 Clause 502 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 Kg to 0.30 Kg per sqm (Zero point two five to zero point three zero kilogram) per square metre on prepared bituminious and cleaned with hydraulic broom as per MODR Technical Specification 2014 clause 503 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying 30(Thirty millimetre) thick bituminous concrete with 100-120 ( Hundred dash One hundred twenty) TPH batch type hot mix plant producing an average output of 75(Seventy five) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 (Five point four to five point six) percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MODR Technical Specification 2014 clause 507 complete in all respects including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 (Forteen) days, using curing compound ( where specified ) and water finishing to lines and grade as per drawing and Technical specification clause 1501 including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Solar heating panel(BOSCH) approved ISI make complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 15(fifteen) millimetres nominal bore galvanised mild steel tubes ( heavy grade) made of B.S.T., Jindal (Hissar), Tata Steel Tubes Ltd., Prakash Surya tube for external work and floors, fitting and clamps including making good the wall, ceiling and floor including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying in trenches galvanised mild steel tubes 20 mm (Twenty milimeter) JINDAL(HISAR)/ TATA STEEL TUBE LTD ( heavy grade )tube fittings (earth work in trenches to be measured and paid separataly) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 15 mm (fifteen millimetre)JINDAL(HISAR)/ TATA STEEL TUBE LTD ( heavy grade ) dia nominal bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Making connection of galvanised steel distribution branch with galvanised mild steel mian 25 to 40 (Twenty five to forty )millimetres bore by providing and fixing tee including cutting as threading the pipes complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00(one ) metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

1216 (16 mm O.D. pipe)(One thousand two hundred sixteen( Sixteen millimetres outer dia pipe))

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

External work 1216 (16 mm O.D. pipe)(One thousand two hundred sixteen( Sixteen millimetres outer dia pipe))

Providing and fixing crush set wc cat no. s 1021114p trap CAT No S 1060106 cistern white shade of Perryware/Jaquar/ Hindware /Cera with seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing C0207 wall hung closet (540X365X395 mm ) ( five hundred forty into three hundred sixty five into three hundred ninety five) millimetre in white shade of Perryware/Jaquar/ Hindware/Cera with seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing Angle C8915 wall hung closet in white shade of Perryware/Jaquar/ Hindware/Cera with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing urinal basin size of 345x365x655 mm ( three hundred forty five into three hundred sixty five into six hundred fifty five millimetre) range of four squatting plates with 10 litre (ten litre) P.V.C. automatic flushing cistern one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing viterous China wash basin (510x400 mm ) (five hundred ten into four hundred millimetre)CAT No. S 2040101 In White Shade of superime quality Parryware, Hindware Sanitaryware, Neycer, Cera including cutting holes & making good the same and carriage of materials within all leads and lifts complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 505X405X155mm (five hundred five into four hundred five into one hundred fifty five millimetres) white vitreous china wash basin C 8863 Basin (half Pediestal) complete making good of the wall where ever require Hindware/Parryware /CERA, Sanitary ware, Naycer make upto all floor level including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing viterous china wash basin CASCADE NXT C0404 Basin in White Shade of Parryware, Hindware Sanitaryware, Neycer, Cera. including holes & making good the same and including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing white vitreous china pedestal of Parryware, Hindware Sanitaryware, Neycer, Cera. for wash basin completely recessed at the back for the reception of pipes and fittings including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Stainless Steel A ISI 304 (18/8) (eighten/eight) kitchen sink size 510 x1040 mm ( five hundred ten into one thousand forty) millimetres bowl depth 250 mm ( Two hundred fifty ) millimetres of AMC, UNIK, DIAMOND, Neelkanth. make as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetres) including painting of fittings and brackets, cutting and making good the walls wherever required upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two milimetre) dia P.V.C. waste pipe Finolax make for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and Fixing Soap dish stainless steel CAN -1531of Jaquar or equivalent complete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder JAQUAR,ESS-ESS make including the carriage of material within all leads, lifts through all modes of transportation as per direction of the Engineer-in-charge and other incidentals. The rate is includes of octroi, royality, Malkana, toll tax , GST, sale tax or other taxes imposed by the Government.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass make of Atul Modi Guard, Golden fish mounted on 6mm (six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer including the carriage of material within all leads, lifts through all modes of transportation upto all floor level as per direction of the Engineer-in-charge and other incidentals. The rate is includes of octroi, royality, Malkana, toll tax , sale tax GST or other taxes imposed by the Government.

Providing and fixing PTMT towel rail complete with CP brass brackets fixed to wooden plugs with CP brass screws 600 mm ( six hundred millimetre long towel rail width 78 mm ( seventy eight millimetre) and effective height of 88mm ( eighty eight millimetre) weight not less than 190 gms (one hundred ninety grams)of Kingstone, Gem, Parko, Techno, Jal, ESS, Seiko, Modi ,JAQUAR make including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 100 mm dia cromium plated grating JAL, ESS-ESS of superior quality for floor, gully or nahani trap complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing CP brass bib tap 15mm (Fifteen millimetres) dia ( Superior heavy type ) of made JAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguar including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing C.P. brass bib cock of 15mm (Fifteen millimetres) dia ( Superior heavy type ) of made JAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguar including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing brass stop cock of 15mm (Fifteen millimetres) dia ( Superior heavy type ) of made JAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguar including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing plasticised PVC connection pipe Finolex make with brass unions 450mm ( four hundred fifty millimetre) length 15mm (fifteen millimetre) nominal size upto all floor level. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing ball valve (brass) JAL, ESS-ESS of approved quality, High or low pressure, with plastic floats complete complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

15 mm (fifteen millimetre)nominal bore

20 mm (twenty millimetre)nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points JAQUAR, JAL-ESS or equivalent of approved quality conforming to IS:8931 complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Brass full way valve with C.I. wheel of approved quality (screwed end) :25 mm nominal dia complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing PVC water storage tank of Sintex three layer make (I.S.I. 12701 marked tripple layer) G.I. inlet or out let connection15mm (Fifteen millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all floor level above ground level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 110 mm x 75 mm (one hundred ten milimeters into seventy five millimeters) PVC Finolex make floor trap working pressure 6.00 Kg per square centimetre (six kilogram per square centemtre) I.S.I. marked of self cleaning design including fixing with approved adhesive including cost of cutting and making goods the walls and floors etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing, laying and jointing 110 mm (one hundred ten millimetre) diameter glazed stoneware pipes class SP-1(one) with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and laying 100 mm (one hundred millimetre) diameter S.W. pipe all round cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design complete including entire carriage of material with in all leads and lifts and as per drawings and MORD technical specifications 2014 and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes FINOLEX / SUPREME ISI marked including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and MORD technical specifications 2014 and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

110 mm (one hundred ten millimetre) diametre

150 mm (one hundred fifty millimetre)diametre

Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

I) 110mm dia

II) 150 mm dia

Providing and fixing PVC single equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing PVC double equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing uPVC Collars ISI marked of Finolex make including fixing with approved adhesive etc.complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing PVC plain bend ISI marked of Finolex make including fixing with approved adhesive etc. complete.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 150mm (one hundred fifty millimetre) dia

II) 110mm (one hundred ten millimetre) dia

Providing and fixing U shaped wall mounted rail with hings 600x 100 mm ( Six hundred into one hundred millimetre ) Cat No. B2210107 and wall mounted grab bar 600 mm ( six hundred millimetre) long CAT No. B2210106 jaguar or equivalent superior quality complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Exhaust fan ISI marked including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing square-mouth S.W. gully trap class SP-1(one) complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five zero kilograme) and frame to be not less than 2.70 kg (two point seven zero kilograme) as per standard design:100x100 mm (one hundred inti one hundred millimetre) size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing C.I. cover without frame for manhole required shape and approved quality rectangular shape 455x610 mm (four hundred fifty five into six hundred ten milimetes) light duty the weight not less than 23Kg ( twenty three kilograme) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Constructing masonry Chamber 60x60x75cm (Sixty into sixty seventy five Centimetyres) inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(nonmodular) bricks of class designation 7.5 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Constructing brick masonry chamber size inside dimensions 455 x 610 and 450 mm (four hundred fifty five into six hundred ten and four hundred fifty) millimetres deep single pipe line.for under ground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (onecement : five sand ) C.I. Cover with frame (lightduty ) 355 x 610( three hundred fifty five into six hunderd ten) millimetres internal diamensions total weight of cover with frame to be not less than 38 (thirty eight ) Kilogramme (weight of cover 23 (twenty three) Kilogramme and weight of frame 15 ( Fifteen) kilogramme R..C.C top slabe with 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20 (twenty) millimetres nominal size ) foundation concrete 1:5:10 ( one cement : five sand : ten graded crushed stone aggregate 40( Forty millimetres nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two sand : four graded/crushed stone aggregate ) 20mm (Twenty millimeters) nominal size foundation concrete 1:4:8 ( One cement : four sand : eight graded/crushed stone aggregate 40mm (Forty millimeters) nominal size) inside plastering 15(Fifteen) millimeters thick with cement mortar 1:3 (One cement : three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two sand : four graded/crushed stone aggregate 20mm (Twenty millimeters nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mm and 500mm (five hundred milimeters) deep including C.I. cover with frame (Light duty single seal : Pattern) -I 455mmx 610mm (Four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) with 200mm (Two hundred millimeters) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three sand) including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

M/s Surindera Traders

Himachal Techno Engineers