Rehabilitation of Cherandathur chira LI scheme for replacement of electric motor and pump set in Maniyur panchayath Kozhikode District

Amount

1 APPENDIX - A -Civil works for foundation of pumpset

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

60.8 : Shutter for check dams- Supplying and providing Thambagam wood shutter planks 5cm thick including cost of materials and labour charges etc complete

60.5 : MS Rings - 100mm dia

13.59 : Coal tarring two coats on new work using 0.16 litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively.

10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

PART-2 Erection &commissioning of 60 HP Pump with 3HP Vacuum pump and pipe works

od36493/2020_2021/MH : Conveyance charge for 1 set of 60 HP motors with pump from the nearest place as specified by the department officer at site to the corresponding pump houses including labour and materials.

od40105/2020_2021/MH : Dismantling of existing damaged pump & motor set from the foundation and from the existing pipe line and leading to nearest place for safe keeping and refitting after necessary repair including cost of labour ,hire charges of equipment etc complete.

od36494/2020_2021/MH : Erection of 60HP pump with Motor in correct alignment after leading them from outside of pump house to the respective foundations including cost of labour, concreting, hire charge of equipment, tools and plats etc. complete.

od40094/2020_2021/MH : Erecting 3HP vacuum pump with motor set on suitable base plate by using suitable foundation bolt and nut

18.66.2 : Providing and laying S&S.C.I Standard specials such as tees, bends, collars tapers and caps etc., suitable for flanged jointing as per IS: 1538:Above 300 mm dia

18.30.8 : Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:350 mm diameter pipe

od40099/2020_2021/MH : Labour for cutting C.I/D.I pipe with steel saw.200 mm diameter C.I/D.I pipe (Ref.18.83.5)

od40108/2020_2021/MH : Fabricating and Fixing MS flanges for connecting pipe lines to bends, reducers etc. including cost of material, labour , machinery, conveyance, painting, incidental and handling charges etc complete. (200 mm pipe)

18.31.4.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):200 mm diameterClass II

18.12.6 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore

18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

18.12.3 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work25 mm dia nominal bore

18.12.5 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work40 mm dia nominal bore

od36500/2020_2021/MH : Supply and fitting of strainer at suction side of pipe (350mm) after dismantling the suction line including painting as per the direction of the department officer at site

18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

od36501/2020_2021/MH : Commissioning of the pumps and motor and trial running as per the direction of the departmental officers at site including materials labour and conveyance

HAREENDRAN K

Bidder Name

P.T.USMAN

HAREENDRAN K