MAINTENANCE AND MISC CIVIL REPAIR WORKS TO MD AND OTM ACCN AT N AREA UNDER GE CHANDIGARH.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Taking down Chowkhats or frames not exc. 1.5 sq. m each( without taking off shutters from the frames) complete all as specified.

S& F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm with single side prelam PVC sheet plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F Factory made pvc door shutter 30 mm thick ( style) 10 mm thick panel consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails & bottom rail;on either side & as gap insert for top rail & bottom rail: panelling of plain colour PVC sheet beading and joined together with solvent cement , supplying & fixing in frame at site as per specification and drawing

Taking down Chowkhats or frames exc. 1.5 sq. m but n exc. 4 sq .m each( without taking off shutters from the frames) complete all as specified.

Taking down shutter exc.1 sqm and not exc 2 sqm each complete all as specified and directed.

Taking down shutter n exc.1 sqm and complete all as specified and directed.

M& L for Pressed steel frames of profile size 125mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primer including PCC 1:2:4 in backfilling of chowkats complete all as specified and as directed.

M& L for Pressed steel frames of profile size 105mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primerPCC 1:2:4 in backfilling of chowkats complete all as specified and as directed.

S&F 35 mm 2nd class hardwood Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specifeid and directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates /Grill for windows including joiniting cleat for fixing complate all as specified.

S&F aluminium powder coated glazed shutter (for doors) with style and top rail of section 80x44 mm,16 guage thick and bottom rails of section 112x44 mm of 16 guage thick , middle rail 150x44 mm of 16 guage thick fixed on floor spring, both side openig without sash bars but including 5 mm thick glass pane with 5 micron thick black film and necessary jointing cleats, rubber beading, anodised alumnium snap beading, screws, alumnium anodised handle-02 Nos, aluminium anodised tower bolt 200 mm long-02Nos and locking arragment(mortice lock)-01 Nos in each shutter complete all as specified and directed.Note-Floor spring shall be measured and paid seperately.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-219 of HQ CE CZ Chandigarh including one shop coat of red oxide primer complete all as specified and directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per Drg No TD-219 of HQ CE CZ Chandigarh including one shop coat of red oxide primer complete all as specified and directed.

S&F steel ventilator (Box type) with top hung shutter including hinges, steel peg towerbolt including one shop coat of red oxide primer complete all as specifed and directed.

S&F 18/19 mm MDF board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws/nails to timber frame work in kitchen cabinets,cupboards etc complete all as specified and as directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 75 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 3.00 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 3.00 Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as speciifed and directed.complete

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S & F Aluminium anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specifid and directed.

S & F 150 mm Extruded aluminium alloy handles powder coated, fabricated type.complete all as specified

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S & F M.S.helical spring including roller & roller plate complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc

M&L for 16-18 mm thick Machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in CM 1:6 complete

All as per item No 28 above but in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4.

S&F mild steel grill, guard bars welded and fixed in wooden/Ms frame etc complete all as specified.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4Type B-1 as required exc. Half brick but not exc. 1 brick.

M&L for two coats of synthetic enamel paint over one coat of red oxide on new Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.

All as per item above but except primer

M&L for two coats of synthetic enamel paint over one coat of pink primer on new wooden Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.

S&F 3 mm thick , sheet glass ordinary quality and glazing with oil putty or wooden beads in squares/rectangles not exceeding 0.5 sqm in each pane including hacking out glass old broken (any thickness, quailty or description) from wooden/steel frames, stone brick, concrete surrounding, glazed with oil putty or fixed with beads etc. complete all as speciifed and directed.

S & F In repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair in repair door closer hydrulicaly, aluminium regulated designation No.1 universal type suitable for door shutter up to 700mm in width and of weight not more than 35 Kg complete all as specified and directed.

S&F in repairs drapery rods (fancy type) 20/25mm in dia with end MS powder coated brackets & funnels fixed with rawl plug and screws, complete all as specified and as directed.

S&F in repair Hasp and staple 125 mm alluminum anodised complete all as specified and direccted.

M&L for Non skid ,joint free Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm laid as in floors, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified in any pattern and shade/colour as directed by Engr-In-charge.

All as per item no 40 above but as in skirting & over & including 10mm thick rendering of cement sand mortar (1:4)

S&F in 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, brass polished finished complete all as specified and directed.

Demolition of brickwork brickwork or stone/boulders masonary, built in Cement mortar or cement lime mortar including all quoins,arches,pillers etc but excluding ashlar facing etc complete all as specified.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified.

Taking down cement plaster on brick walls or stone walls of any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Rendering 5mm thick cement plaster on brick work or concrete surfaces including roof projections and chajjas of buliding at upto 10 mtr height in cement mortar (1:3) on ceiling finished even and smooth without using extra cement all as specified and directed.

Supply only crushed stone Graded coarse aggregate of Nominal size 20mm/12.5 mm

Supply only Fine Aggregate (sand) for concrete

Supply only Cement ordinary portlasnd, portland pozzolana or portland slag

Supply only bricks, size 230 x 113 x 75 mm

Rendering 15 mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:4) finished fair and even upto 12 mtr height all as specified and directed.

Rendering 15 mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement all as specified and directed.

M&L three coats of white wash on wall on newly plastered surfaces including prepraration of surfaces complete all as specified.

M&L two coats of oil emulsion distemper on newly plastered surfaces of walls on plastered surfaces,preaparatory to distempering and incl. preparing the surface perfectly smooth by using 1 mm wall care putty on complete surfaces complete all as specified .

M&L two coats of cement base paint on walls on newly plastered surfaces including prepartion of surfaces complete all as specified and directed.

Aapplying Two coats of Exterior grade acrylic emulsion(Apex ultima) over a coat of primer on newly plastered surface of walls complete all as specified and as directed.

M&L three coats of white wash on ceiling on newly plastered surfaces including prepraration of surfaces complete all as specified.

Applying Two coat of oil bound distemper over a coat of primer on newly plastered/or surfaces prepared by wallcare putty of walls complete all as specified and as directed.

Aapplying Two coats of interior grade acrylic emulsion over a coat of primer on newly plastered/or surfaces prepared by wallcare putty of walls complete all as specified and as directed.

Preparation of old treated wooden surface, of any description over 10cm width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and directed.

M & L for Preparation of old steel surface, of any description over 10cm width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and directed .

Demolition of Reinforced Concrete of any description and in any position complete all as specfied and directed.

M&L RCC B-1 1:2:4 (20 mm graded crushed stone aggregate) for Slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves ,lintel beam and the like including necessary formwork complete all as specified.

M& L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed.

Dismantling of walls and ceiling boards or insulation board any thickness, including cover fillets complete all as specified and directed

M&L for providing and fixing Gyp board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx9mm thick as in ceiling having snap grid 600mmx600mm including GI wall angle of size 24mmx24mmx0.43mm thick along with perimeter of ceiling, fixed to walls/ partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate Tee section of size 24mmx38mmx0.35mm thick and cross Tee-section 24mmx25mmx0.3mm thick suspended from soffit of ceiling at up to 900 mm centre to centre or adjustable as required at site.4mmdia GI wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all as specified and directed

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts

M&L Asbestos cement one piece plain angular ridge 6mm thick Fixed with L-type or J-type or cranked hook bolts in repair

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates GDE Fe410-0 or Fe 310-O

Demolition of Concrete of any description and in any position complete all as specified and directed.

S&F Factory made prepolished precast cement concrete chequered tile 25mm thick in required size, shape & colour set jointed and pointed in neat cement sullry with grey cement and pigment over and including 20mm screed bed in CM 1:4 complete all as specified and as directed.

M&L for Hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L 40 mm thick cement concrete 1: 2:4 , type B-1 as in flooring complete

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F Tubes 15 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.

All as per item No 82 but 20 mm bore complete all as specified and directed.

M & L Glazed ceramic colour tiles in vertical surface 350 x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . The tiles shall be laid in pattern with two or more colured tile including rendering 10 mm thick on brickwork or concrete surfaces finished even and fair in CM 1:4 combinations all in any pattern and shade/colour as directed by Engr-In-charge. .Make-Somany or equivalent of Kajaria/Johnson

Dismantling water tanks of capacity exc. 250 but n. exc. 500 litres complete all as specified and directed.

Dismantling water tanks of capacity exc. 500 but n. exc. 1000 litres complete all as specified and directed.

M&L for 16 to 18 mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.

Dismantling of cast iron/ reinforced concrete/PVC drain pipes, 100/75/50mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F in repair 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketsPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair complete all as specified.

M&L Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75 mm bore fixed in repair complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 500 litre capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 1000 litre capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

M&L for light coloured vitrified tiles 8 mm to 9 mm thick (square/rectangular) area of each tile not exc 0.36 Sqm laid as in floors, set and jointed with cement slurry over & including 15mm thick bedding of layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

All as per item No 93 above but as in skirting & over & including 10mm thick rendering of cement sand mortar (1:4)

S &F in repair Brass CP mixer for mixing hot & cold water in sink/ wash basin screwed down for iron pipe and fixed for 15 mm bore pipe.

S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20 mm bore dia complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15 mm bore dia complete all as specified and directed.

PVC connections in repair 15mm size with PTMT nuts of length 450/600mmcomplete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests with 'P; & 'S' trap and including flush pipe complete all as specified and directed.

S & F vitreous china wash down water closet (pedestal pattern) white with ‘ and including CI P’ or ‘S’ trap, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe etc as in repair complete all as specified and as directed.

S & F in repair CP Stop valves Concealed, cast copper alloy chromium plated fancy type screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed for 15 mm bore complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) fixed to 20 mm bore in repair complete all as specified and directed.

S &F in repair Brass CP wall mixer with 115mm long bend pipe for overhead shower for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore pipe.

S&F in repair health faucets complete all as specified and directed.

S & F single piece WC of size 750x360x650 with flushing cistern and connection pipe, P or S trap complete all as specified.

M&L for Vitreous china oval shape wash hand basin white size 560x470mm to be fitted in granite shelf /Rcc slab including 32 mm dia CP waste coupling and 60cm waste pipe complete all as specified.

M&L for Non skid ,jointfree Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exc 0.11sqm laid as in floors, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and in any pattern and shade/colour as directed by Engr-In-charge.

Disconnecting existing tanks exc 250 ltr and n exc 500 ltrs in capacity for cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and reconnecting and re-fixing in position complete all as specified and as directed.

All as per item No.108 but exc 500 ltrs and n exc 1000 ltrs in capacity

S &F in repair chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore pipe complete all as specified and directed.

S &F 15 mm bore Pillar taps fixed in repair cast copper alloy, fancy type with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair CP Stop valves/angle valves, cast copper alloy chromium plated fancy type screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed for 15 mm bore complete all as specified and directed.

S & F as in repair Sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plug, washers and wastes, including bedding in cement sand mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 915mm x460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F Cast iron repair Bends (any radius) with duck's foot or heel rest 100 mm bore complete all as specified and directed.

S&F Cast iron repair Bends (any radius) with duck's foot or heel rest 75mm bore complete all as specified and directed.

S&F Cast iron 100 mm bore junction single T equal or unequal with access door fixed in repair complete all as specified.

S&F Cast iron 75 mm bore junction single T equal or unequal with acess door fixed in repair complete all as specified.

S&F PVC Wall panelling of 5 mm including necessary frame work completed all as specified by Engr-ibn - Charge

Dismantling boarding/ Wall Panelling of any description, fixed in any position with nails complete all as specified and directed.

Cutting into existing manholes for removing existing branch drain making good to walling and rendering cutting out branch channel and making good benching for 100mm/75 mm bore pipe

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including fixing bracket waste coupling and waste pipe complete all as specifeid and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe including flushing pipe ad connection to flushing pipe complete all as specified

S& F in repair Brass chromium plated shower rose 125mm including fixing to steel pipe or union complete

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors 100 mm bore complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors 75 mm bore complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall 100 mm bore complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall 75 mm bore complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall 50 mm bore complete all as specified and directed.

S&F Cast iron in repair Bends (any radius), diminishing pieces or tapers (larger bore measured) 75 mm bore with ovel access door complete all as specified and directed.

M AND H BUILD TECH

rana & co.