Modernization of Swimming pool at Jimmy George Sports Hub, Thiruvananthapuram- Construction of Cafeteria near swimming pool

16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

4.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

65.4 Mobile crane

OD66562/2026-2027 Providing and placing prefabricated container of approved make and specifications, of size 40 ft × 8 ft × 8 ft 6 in, including loading at source, transportation to site, handling, shifting, positioning at the designated location, all labour, machinery, tools and plants, lifting arrangements, and all incidental charges complete, as per the directions of the Engineer-in-Charge.Any loss, damage, deformation, denting, corrosion, breakage, or deterioration to the prefabricated container during loading, transportation, unloading, handling, shifting, lifting, positioning, or placement shall be entirely at the contractor's risk and cost. The contractor shall repair or replace the damaged container or any of its components to the satisfaction of the Engineer-in-Charge without any additional cost to the department. The item shall be deemed complete only after successful installation and acceptance by the Engineer-in-Charge.

OD66588/2026-2027 Providing and placing prefabricated container of approved make and specifications, of size 20 ft × 8 ft × 8 ft 6 in, including loading at source, transportation to site, handling, shifting, positioning at the designated location, all labour, machinery, tools and plants, lifting arrangements, and all incidental charges complete, as per the directions of the Engineer-in-Charge.Any loss, damage, deformation, denting, corrosion, breakage, or deterioration to the prefabricated container during loading, transportation, unloading, handling, shifting, lifting, positioning, or placement shall be entirely at the contractor's risk and cost. The contractor shall repair or replace the damaged container or any of its components to the satisfaction of the Engineer-in-Charge without any additional cost to the department. The item shall be deemed complete only after successful installation and acceptance by the Engineer-in-Charge.

100.98.1009 Engaging Fitter ( grade 1).

9.147A.2 Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm).

9.147A.3 Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window upto 2.50 sqm).