REPAIR TO INTERNAL WATER SUPPLY, TILING, SANITARY FITTING AND OTHER CONNECTED REPAIRING WORKS IN TECH AREA AT AF STATION JAMNAGAR

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, including ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling

M&L for pre-cast cement concrete block masonry 1:5:8 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete

M&L for rendering 5 mm thick in cement mortar 1:4 (as second layer) over and including 10 mm thick rendering in cement mortar 1:6 ( as first layer) on fair faces of brick work or concrete surfaces, including mixing only water proofing compound in second coat as per manufacturer's instruction. Note:- Water proofing compound will be measured and paid seperately

Supply only liquid waterproofing compound

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

M&L for preparation of new plastered wall surface including pilaster/cornices etc and Finishing walls with Acrylic Smooth exterior paint of required shade Note:- New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer on walls including a coat of cement based wall care putty

Demolition of floor, hearth or wall tiling or stone slab laid , bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to a distance exc 1.5 km but n.exc 2 km complete

M&L for Non - skid joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of cement mortar 1:6, 15 mm thick

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick backing coat in cement mortar 1:3

M&L for virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for green marble work 15 to 18mm thick (table rubbed and polished) & circular cutting at one end in steps, jambs, pillars, window, cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 20mm thick screed bed in CM 1:6 complete

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like set and jointed in cement paste including backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of debris to a distance exc 1.5 km but n.exc 5 km

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc

M&L for providing, cement concrete Type B1 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for 25 mm thick cement concrete type B- 0, 1:2:4 (12.5mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc

Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame)

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F flush shutters 40 mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 75 mm size butt hinges, medium weight, cold rolled mild steel, and fixed

S&F 150 mm size aluminium handles, cast type, anodised

S&F 150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed

S&F 100 mm size Butt hinges, heavy weight, cold rolled mild steel, and fixed

S&F 300 mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts & P or S trap) and finishing with white cement

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding

S&F PVC (SWR) pipes 110 mm bore, single socketed in any length with rubber ring joints fixed to walls including taking down old pipe

S&F PVC (SWR) pipes 75 mm bore, single socketed in any length with rubber ring joints fixed to walls including taking down old pipe

S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repairs 15mm size angular cock, cast copper alloy, CP fancy type with capstan head, screwed down, screwed both end for iron pipes complete

S&F in repairs 15 mm size fancy type, chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs stainless steel grating round 150 mm size.

S&F in repairs 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracket and connections to pipes and fixing of chain and pull, or lever.

S&F in repairs stainless steel single towel rail of size 450 mm long

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges

S&F in repairs health faucet with 1 mtr long easy flex tube in chrome finish & wall hook, complete all as specified

Supply and fix in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

S&F PVC (SWR) vent cowl 75 mm bore

S&F PVC (SWR) vent cowl 110 mm bore

S&F in repairs Vitreous China bowl urinal angle back of size 430 x 370 x 340 mm (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repairs Toilet paper holder, coloured vitreous China, box type fixed to walls with chromium plated (CP) brass screws

S&F in repairs white glazed fine clay sink size 600x450x200mm with plugs, washers and wastes including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe

S&F in repairs Vitreous China wash basin, wliile, flat back, size 580x450 mm (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand

S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws

S&F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F PVC (SWR) bend 110 mm bore any radius

S&F PVC (SWR) bend 75 mm bore any radius

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450mm

Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified Note:- Cutting chases wherever required will be measured and paid seperately

Supplying and laying of 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified Note:- Cutting chases wherever required will be measured and paid seperately

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store

S&F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm

M&L for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc

M&L for Rubber moulded chequered cement concrete tile with white cement and pigment (of approved tint) of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat coloured cement slurry to match the tiles complete over and including 20 mm thick screed bed in cement Mortar 1:6.

Honest builders

S t modi