Repair of Electrical works at State Animal Health Centre (SAHC), Patharpratima under,South 24 Parganas.

Amount

Dismantling all existing damaged wirings,switch boards,junction boxes,light fittings etc. including mending good the damages & stored in safe custody as per direction of EIC.

S&F meter loop in 1.1 KV grade 2 core 6 sq mm. (approx 2 meter.) unarmoured cu cable with S&F Hylam Sheet 12 mm thick/Mounting plate of adequete size(1'X1') & 32 Amp kit-kat fuse unit

Supplying and fixing 240V,32 Amp DP Sheet steel Main Switches on angle iron frame on wall (Make Havells/Standard/HPL/Anchor)

Supplying and fixing 240V,16 Amp DP Sheet steel Main Switches on angle iron frame on wall (Make Havells/Standard/HPL/Anchor)(for Pump Motor)

S&F 2+14 way double-door SPN MCB DB (IP-42/43 Protection)with 240V 40A DPMCB isolator as incomer and 14 Nos. 6-32A SPMCB as outgoing, on flat iron frame on wall and mending good the damages to original finish, incl. Inter connection with suitable size of copper wire and neutral link and provision for earthing attachment as per GS. [Make:Legrand/ABB/Siemens]

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish (Average run 8 mtr)

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish -- On Board

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works incl. S&F 250V 6A 5 Pin Plug socket - 2 Nos. & 6A switch (Mk. Anchor) - 2 Nos. after making housing for switch by cutting bakelite cover with making necy. Connection & earthing arrangement as per GS. (Separate Plug)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switchboard embedded in wall incl. S & F 150x100x65mm MS (16SWG) switchboard and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for the switch by cutting bakelite/perspex cover and making necessary connections as required. (Power Plug & Geyser Connection)

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Computer Board)

Supply & Fixing 240 V, 2 no. 6A, plug socket with separate 2 no. 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire [ for Ac connection ]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc [ for Ac connection ]

Supply & Delivery of 1.1 kv grade 2Cx6 qmm XLPE-armoured AL. cable, as directed by EIC [Make - Gloster/Polycab/Havells/RR Kabel] (For Compound Lights)

Laying of cable 2CX6 sqmm XLPE-armoured AL. cable sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting as per GS

Laying of cable 2CX6 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

S&F compression type gland complete with brass gland, brass ring & rubber ring for dust & and moisture-proof entry of 2CX6 sqmm XLPE/PVC armoured cable, as per GS.

S&F Finishing the end of 2CX6 sqmm XLPE/PVC armoured cable by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials, as per GS.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. a)2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (for Separate Board, Compound Lghts & Gate Lights)

b)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (For Power Plugs & Computer Boards)

c)2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC (For AC & UPS)

d)2 x 84/0.3 (6 sq mm) + 1 x 56/0.3 (4.0 sq mm) ECC (from DPMCB to SPNDB & For Pump Motor connection)

Finising the end of above PVC insulated & unsheathed copper wire as per GS. a) 2 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4.0 sqmm)

Finising the end of above PVC insulated & unsheathed copper wire as per GS. b) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm)

Finising the end of above PVC insulated & unsheathed copper wire as per GS. c) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only lamp

Supply and delivery of Single LED Fitting (18Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube, as directed by EIC. [Make: Philips Havells, Bajaj, CG, Wipro or as per EIC] (Luminous efficiency > 105 & <120 Lumen/watt. The LED Luminaries & accessories shall have BEE certification)

Supply & delivery of 220-240 V B22 9 Watt CDL/ 6500K LED Lamp as per EIC (Make-Havells Cat no.LED ADORE PLUS 9W B22 CDL 3 STAR LAMP, Philips/Crmpton)

Supply and delivery of 230V 230mm (9") Exhaust fan with all necessary accessories, as directed by EIC. [Make: EPC Heavy Duty, Usha, CG, Bajaj or equiv Make]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: a) 23cm (9")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) a) 23cm (9")

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switchboard with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Supply & delivery of 1200 mm sweep 230 volt AC Ceiling fan incl. Blades, canopy etc. With 18" down rod(14SWG), Fork(10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc.with safety wire & PS2 type capacitor, as directed by EIC. [Make-Orient /Crompton/ Havells (Safety Wire & S3/P2 Capacitor)]

S&F of 250V double door AC Timer DB [equivalent of 2+8 way SPNDB] with sheet steel enclosure, pnosphitised powder coated neutral bar, DIN rail with IP-43 potection comprising with 1 no. 25A DPMCBIsolator, 2 no. 16A SPMCB ('C' curve 10KA), 1no. Programmable Digital time switch-24 hrs with minimum switching of 15 minutes, and 1 no. 18A/25A 2-Pole power contractor with inner-outer plate & internal wiring by suitable size of cu. wire incl. 1 no. Auto-Manual bypass toggle switch and provision for earthing attachment, incl. LED indication light for running condition with mechanical locking arrangement, as directed by EIC.. [AC& Glow sign Board] (For AC) [Make-ABB/L&T/Crabtree]

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building including making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end and suitable bend to house the fitting and making necy. connections with S&F necy. length of 1.5 sq mm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supply & delivery of 250V, 2750 lumen output (Minimum) LED street light with IP-66 protection,made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment, efficacy-110 lumen/Watt lumen (minimum) output fittings, as directed by E.I.C. [Make: Havells / K-Lite/ Philips/ Crompton]

Supply and delivery of 250V, 25W Gate light made of high-grade unbreakable polycarbonate material suitable IP65 for retrofitting LED base, as directed by EIC. [Make: Havells - RUBYPT25WLED757SSYMTOPC or equivalent spec of K-Lite/ Philips/ Crompton]

Supply, Delivery & installation of LED Sign Board (as per inscription given by the authority during the execution of work) of Size 20'x4' sq ft with front side 3mm thick A-1 quality ACP Blue colour (AD-41) board capable of preventing avoid wind pressure which is also to be attached to M.S. structure(front/back side of board of suitable size MS angle/ MS hollow square/rectangle bar by drilling hole incl. S&F special type steel nuts, bolts and washer). The matter of the LED sing board should be in English/Bengali alphabets made of laser cutting box type by white colour letter making in the shape of male/female incl. all fixing facility, from 3mm thick imported white acrylic sheet including jointing/setting the same part by part and fixing on the board by using chloroform/machine screw etc. is to be fixed on ACP board (on front) incl. S&F SMD module (Best Quality make) of required quantity for illumination of.(Male & Female) letters including necessary interconnection & SMPS. The matter will be as per requirement of competent authority and as per direction of EIC.(80 sqft *1nos of board), incl Erection of glow sign board on wall with 4 nos.L Shape Angle 8'long x 2" Width x 3mm thickness with nut,bolts etc. as directed by EIC.

Making necessary arrangement for fixing the above LED board by making necessary supporting structure to resist storm by S&F of 40mmx40mmx5mm M.S. angle incl.making brick foundation at on height of 5ft from roof level incl. all fixing accessories including providing necessary fixing materials

Charges for making heavy type scaffolding arrangement hiring materials and removing after work as required

Earthing with 50mm dia GI pipe (ISI-M) 3.64mm thick x 3.04 Mts. long and 1x4 SWG GI (Hot Dip) wire (4 Mts. long), 13mm dia x 80mm long GI bolts, double nuts, double washers incl. S&F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under-ground level and partly above-ground level driven to an average depth of 3.65 Mts. below the ground, as per GS.

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil)

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS -- No.-4 SWG

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

UPS:-SITC of 6KVA (1-Phase Input & 1-Phase Output) True Online Double Conversion UPS, with 30 Min Back Up along with MS rack for battery & battery interconnecting cables. [Make: - Numeric/APC/Emmerson/Switching AVO/Power One] *KVA: 6 KVA, *KW: 4.8 KW *In/Out phase Configuration: Single / Single, *Neutral: Neutral Passing through *Output wave form on mains run: Sinusoidal *Output wave form on battery run: Sinusoidal *Transfer time: Zero INPUT *Input Voltage: 160-300 1-PH+N *Operating Frequency: 50 Hz (autosensing) *Transformer inbuilt at input side *Input Power Factor: 0.99 OUTPUT *Nominal Voltage: 220VAC/230V/240VAC ± 1% *Frequency: 50 Hz ± 0.1% *Frequency Synchronization: 47.5 to 52.5 Hz *Voltage THD: <2% LINEAR LOAD, <5% NON LINEAR LOAD *Overall Efficiency: 92% *Over load capacity:105-110% 10MIN & 111-130% 1 MIN

COMMUNICATION * RS232 available *USB Com Port available *Operating Temperature::0-40 Degree continuous FEATURES * Converter Mode : Available * BYPASS PARAMETERS CONFIGURABLE:Available * DIsplay: LCD Display MECHANICAL *Ingress protection: IP20 BATTERY DC Bus Voltage:192V/ 240V, Battery VAH: Min 6240. Battery Make: Exide / Amaron / Equivalent Battery Charging: Constant Current & Constant Voltage STANDARDS *SafetyY:EN/ IEC 62040-1, *EMI/EMC:EN/IEC 62040-2 *Performance:IEC62040-3 *Certification:CE as directed by EIC.

Note: 1. All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year from the date of commissioning. 2. Total is rounded off to the nearest rupees.

JANA ELECTRICALS (BID ID -6485324)

BHARAT INFOCOM (BID ID -6465841)

VAIRAB ENGINEERING (BID ID -6487241)