WELCOME MAINT MISC REPAIRS OF MD ACCN AT OUTRAM LINES UNDER STATION HQ AREA UNDER GE (ARMY) BARODA

Amount

M&L for Preparation of old decorated surfaces, plastered or unplastered including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete

All as per item No 1 above but on ceiling.

M&L for Preparation of old decorated surfaces on walls and preparation of surfaces and applying two coats of oil emulsion distemper complete.

M&L for complete removal of existing treatment on walls and preparation of surfaces and applying 1mm to 1.5mm thick wall care putty and finished to receive a coat of alkali resistant primer and then apply two coat oil emulsion distemper complete

M&L for Preparation of old decorated surfaces, plastered or unplastered including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper complete.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width of girth and applying a coat of synthetic enamel paint complete.

All as per Item No 6 above but on old steel surfaces.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width of girth and applying a two coat of synthetic enamel paint complete.

All as per Item No 8 above but on old steel surfaces.

Taking down cement plaster on brick/concrete Internal surfaces including scrubbing down with water etc. and M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth without using extra cement complete.

Taking down cement plaster on brick/concrete surface including scrubbing down with water etc. and M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:4 for finished even and smooth (without using extra cement) complete.

M&L preparing new plastered surfaces of wall and applying 1mm to 1.5mm thick wall care putty and finished to receive a coat of alkali resistant primer and then apply two coat oil emulsion distemper complete

M&L preparing new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete

Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, and M&L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete

Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, and M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing sericeable tiles to store and rubbish off the premises

M&L Glazed ceramic coloured tiles in vertical surface of size 300 x 450 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in CM 1:4 backing coat on vertical surface of wall to receive wall tiles complete .

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes complete

M&L for Vertified Ceramic tiles 10mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of morter 15mm thick in CM 1:6 for laying floor finishes complete

M&L for Vertified Ceramic tiles 10mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 sqm in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM 1:4 backing coat on vertical surface of wall to receive wall tiles complete

Demolition of stone slabs and tiles of any description or thickness in floors & walls, laid bedded & pointed in any mortar complete.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit complete

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete

S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs, washers and waste, including bedding in CM 1:3 on to dwarf wall and connecting union to pipe, overall size 915mm x 460 mm & bowl size 410mm x 330mm x 160mm complete

S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs, washers and waste including fixing cantiliver brackets and connecting union to pipe, overall size 915mm x 460 mm & bowl size 410mm x 330mm x 160mm complete

S&F in repairs stainless steel plate rack of size 880 x 880 x 220mm, 23 guage thick complete

Taking down and refixing in the same opening of shutter of any description n.exc 1 sqm each complete

Taking down of shutters of any description exc 1 sqm and n.exc 2 sqm each complete

S&F factory made 25 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side and the other side covered with decorative face veneer with Teak wood lipping 6 mm thick to frame to match complete

S&F in repairs factory made 18 (+ 0.7 mm) thick PVC sheet one sided prelaminated sheet cabinate shutters and interior. 18mm (+ 0.7 mm) thick sheet of density 600 kg/m3 bent at 90 degree and finished all edges at all level for making edges, Lipping/bending or 0.5mm thick PVC sheet lipping at ll four edges using bonding tape etc complete all as per directed.

S&F Butt hinge, medium wight, cold rolled mild steel of 100 mm size complete

S&F in repairs Butt hinge, medium wight, cold rolled mild steel of 100 mm size complete

S&F Butt hinge, medium weight, cold rolled mild steel of 75 mm size complete

S&F in repairs Butt hinge, medium weight, cold rolled mild steel of 75 mm size complete

S&F 150mm aluminium alloy handles cast type anodised complete

S&F in repairs 150mm aluminium alloy handles cast type anodised complete

S&F 100mm aluminium alloy handles cast type anodised complete

S&F in repairs 100mm aluminium alloy handles cast type anodised complete

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete.

S&F in repiars 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete.

S&F 125mm aluminium anodised barrel tower bolts of extruded section and fixed complete.

S&F in repirais 125mm aluminium anodised barrel tower bolts of extruded section and fixed complete.

S&F 300 mm Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt Type) and fixing, clips of sheet of extruded sections and fixing bolts complete.

S&F in repairs 300 mm Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt Type) and fixing, clips of sheet of extruded sections and fixing bolts complete.

S&F 250 mm Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt Type) and fixing , clips of sheet of extruded sections and fixing bolts complete.

S&F in repairs 250 mm Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt Type) and fixing , clips of sheet of extruded sections and fixing bolts complete.

S&F 100 mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete

S&F in repairs 100 mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete

S&F in repairs 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete

S&F in repairs 4.00mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.56mm and fixed with stainless steel wire staples complete.

M&L securing sheet glass 4.00 mm thick, ordinary quality in existing wooden frames glazed with putty/beads in square n exc 0.5 sqm in each pane including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting /oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete

S&F in repairs 2nd class HW Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete

S&F in repairs 25mm dia stainless steel 202 grade tubular curtain rod complete

S&F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) complete

S&F in repairs 15mm bore brass bib tap , chromium plated fancy type screwed for iron pipe or brass ferrule complete

S&F in repairs15 mm dia brass Pillar taps, chromium, plated fency type fixed to iron pipe or brass ferule complete

S&F in repair 15 mm dia brass Pillar taps, chromium, plated fency type fixed to iron pipe or brass ferule complete

S&F in repairs stop valves for 15 mm bore brass chromium plated stop valve fancy type with long shank concealed type fixed to iron pipe or for brass ferrule complete

S&F in repairs chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia complete

S&F in repairs brass CP mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete

S&F in repairs CP Soap dish, fixed to plugs with chromium plated brass screws complete.

S&F in repairs glass shelf (450 x 150mm) with chromium plated guard complete.

S&F in repairs Vitreous China wash down water closet (pedestal pattern) and trap white including fixing bolts, WC seat cover of fixed with aluminium or MS chromium plated hinging device complete.

S&F in repairs PVC water closet seat cover, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete.

S&F in repairs for PVC low level flushing cistern, white, 10 Ltrs capacity with all internal accessorie fixed to wall & making good to wall surfaces complete.

S&F in repairs Toilet jet sprey made out of stainless steel flexible tube of 15 mm dia complete

S&F in repairs Health Foucet (hand shower) made out of stainless steel flexible tube of 15 mm dia complete ,

S&F in repairs Vitreous China wash hand basin, flat back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket complete

M&L in repairs 32mm waste fittings, brass , chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete.

S&F in repairs 40 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waste pipe complete

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges complete as in repairs.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete.

S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors (concealed type) complete

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete.

S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors (concealed type) complete.

Refixing 20 mm bore steel tubing and connections in new or old position (Walls, Ceiling, floors, etc) complete

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete.

S&F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete.

Refixing 25 mm bore steel tubing and connections in new or old position (Walls, Ceiling, floors, etc) complete

Disconnecting existing tanks of of capacity exceeding 500 Ltr but not exceeding 1000 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing,etc.) complete

Dismantling water tank and S&F 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete

Dismantling water tank and S&F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete

S&F Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screw-wed for iron pipe or brass ferrule and fixed complete

S&F in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screw-wed for iron pipe or brass ferrule and fixed complete

Taking down PVC/CI pipe of any pattern size including all fittings etc. and cleaning for refixing or removal outside MD land complete

S&F in repair 100/75 mm dia CP grating with hole or without hole fixed to existing NT/FT complete.

S&F in repair 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent complete.

S&F in repairs 110mm dia PVC SWR pipe single socketed in any length with rubber ring joints fixed to walls complete

S&F in repairs 110mm dia PVC SWR bend with oval access door complete

S&F necessary weldings in Repairs 2.5 cm but n exc 5cm thick of metal to be welded complete

M&L for Polishing /cutting to existing terrazo/kota stone flooring with filling joints including, cleaining the surface complete

S&F in repairs 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete

Taking down carefully copper / Aluminium point wiring (light, fan, socket or power) including fittings and M&L for Point wiring with 1.5 sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated unsheathed (FRLS) cable enclosed in & including 25mm dia bore PVC conduit with accessories ISI marked fixed on surface of walls/ceilings by means of PVC Sleeves / dash fastners and cadmium screws all as per IS fittings mounted on terminal box with 3 mm thick phenolic laminated sheet top cover concealed in wall. The thickness of sunken box shall be 1.2 mm. The cover shall be fixed to terminal box with brass screws incl 1.5 sqmm single core multistranded PVC insulated but unsheathed cable as earth continuity conductor to common earth dolly drawn in same conduit & making good disturbed surfaces to match with the existing for One light controlled by one switch 6 amp one way complete.

All as per Item No 97 above but for One fan point controlled by one switch 6 amp one way complete.

All as per Item No 97 above but for One bell point controlled by one switch 6 amp one way

All as per Item No 97 above but for One 3 pin switch socket combination 6 amp on the independent board.

All as per Item No 97 above but for One 3 pin switch & socket on same board with other switches.

All as per Item No 97 above but for One light point controlled by two way switches

All as per Item No 97 above but for point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

Taking down carefully copper / Aluminium point wiring(light, fan, socket or power including fittings and M&L for concealed point wiring with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in & including medium grade PVC conduit not less than 20 mm dia concealed, sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit including cutting chases and finising of slote by means of cement mortar, colour & making good disturbed surfaces to match with the existing for One light controlled by one switch 6 amp one way complete.

All as per Item No 104 above but for One fan point controlled by one switch 6 amp one way and fan regulator

All as per Item No 104 above but for One bell point controlled by one bell switch 6 amp one way

All as per Item No 104 above but for One 3 pin switch socket combination 6 amp on the independent board.

All as per Item No 104 above but for One 3 pin switch & socket on same board with other switches.

All as per Item No 104 above but for One light controlled by two way switch 6 amp

All as per Item No 104 above but for point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

Taking down carefully copper / Aluminium point wiring(light, fan, socket or power including fittings and M/L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 1.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 2.7 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly & making good disturbed surfaces to match with the existing complete for One light/fan/bell point controlled by one switch 6 Amp one way

All as per Item No 112 above but for One 3 pin switch socket combination 6 amp on the independent board.

All as per Item No 112 above but for One 3 pin socket outlet on same board with other switches.

All as per Item No 112 above but for One light controlled by two way switch 6 amp

All as per Item No 112 above but for point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

S&F in repair TPN DBs 4 way with provision for FP as incomer and SP as outgoing, IP 43-IK 09 with metal double door complete.

S&F in replacement Distribution board SPN 12 way Double door including fixing and connecting of mounting MCBs isolator, ELCBs etc factory made, confirming to IS:13032 fabricated out of CRCA sheet. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all way complete.

S&F in replacement Distribution board SPN 8 way Double door including fixing and connecting of mounting MCBs isolator, ELCBs etc factory made, confirming to IS:13032 fabricated out of CRCA sheet. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all way complete.

S&F in replacement Distribution board SPN 4 way Double door including fixing and connecting of mounting MCBs isolator, ELCBs etc factory made, confirming to IS:13032 fabricated out of CRCA sheet. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all way complete.

S&F in replacement DB's MCB's TPN 63 Amps 35 KA rupturing capacity of 10/35 KA rupturing capacity conforming to IS-8828 complete.

S&F in replacement DB's MCB's SPN 5 to 40 Amps rupturing capacity of 10/35 KA rupturing capacity conforming to IS-8828 complete.

S&F in replacement DB's MCB's SP 5 to 40 Amps rupturing capacity of 10/35 KA rupturing capacity conforming to IS-8828 complete

M&L switch piano flush type single pole, one way 6 Amp complete .

M&L in repairs switch piano flush type single pole, one way 6 Amp complete .

M&L switch piano flush type single pole, two way 6 Amp complete .

M&L in repairs switch piano flush type single pole, two way 6 Amp complete .

M&L socket outlet 2 in 1, 3 pin 5 Amps complete

M&L in repairs socket outlet 2 in 1, 3 pin 5 Amps complete

M&L switch socket combination 5 pin 6 Amp complete.

M&L in repairs switch socket combination 5 pin 6 Amp complete.

M&L Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete.

M&L in repairs Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal.

S&F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 230 volts ISI marked complete.

S&F in repairs ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 230 volts ISI marked complete.

S&F in replacement fan regulator electronic type 100Watt 20V-50Hz complete.

S&F lamp holder, PVC/Polycarbonate type and back plate suitable for batten fitting complete

S&F in repairs lamp holder, PVC/Polycarbonate type and back plate suitable for batten fitting complete

M&L in repairs flush type bell push 6 amp duly marked for bell complete.

M&L in repairs Electronic ding dong bell AC 230V single pole complete .

M&L in repairs Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor complete. NOTE : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

M&L in repairs Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor complete. NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

Supply, Fixing, Testing and commissioning in replacement of 4' LED not less than 1X18W LED Batten with LED tube not less than 18 watt, Similar to Batten cat Part No.REGALBATTEN8UPTO1X22wSSBSWH and LED tube light cat part No.CRYSTAL1213T8DSTL18WLED865SGLASS of Havells complete.

Supply, Fixing, Testing & Commisioning in replacement of 2' not less than 10W Mirror LED Batten Mounting on two PVC square boxes of size not less than 75mm X 75mm complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose similar to Model-ENDURALINEARNEOBS10W LED 830SPCWH of Havell's complete.

S&F wall security light LED type not less than 20W . The Luminaire connecting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose similar to Model- ENDURACITYLITEPLATSL20W LED 757SASYBOPC of Make Havells complete.

M&L in replacement of 25 mm bore light grade GI pipe fixed as bracket, on wall any type, not less than 1.0 m long and bent to shape as required complete with sutiable clamp made out of 25 x 4mm Flat iron duly fixed 12mm dia nuts, bolts, washers etc.suitable for steel tubular / PCC pole complete.

M&L for opening covers of ceiling fan, remove the burnt winding, cleaning the slots and rewinding the fan with supper enammeled copper wire of same wire gauge, varnishing after winding, drying, replacing unserviceable fan bearings No 6201 / 6202 for 1200, 1400mm sweep, greasing, soldering the copper terminal of winding with single core copper multistraded wire of 0.5 sqmm and re-assembling fan, replace of fan capacitor 1.7/2.5mfd and making connection with fan capacitor and connector block, assembling the blades and hanging the fan in its own position to existing fan clamp and down rod with necessary Nut, bolt and washer and testing for smooth functioning after repair complete. Note : Quoted rate deems to inclusive of rate of fan capacitor, fan bearing and transporatation charges.

M&L for over-hauling / servicing of ceiling fans inclucing replacement to rubber reel, split pin, capacitor and oiling/greasing, painting and testing at site complete.

S&F in replacement ceiling fan 1200 mm sweep including fixing of down rod and connection complete with & including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50 sq mm from ceiling rose/connector to fan, Similar to Model - Empower 50 or Entrust or Asset of Crompton Greaves complete. Note: Old UNSV ceiling fans will be deposited to AGE E/M office through RV.

M&L for opening covers of Exhaust fan 225/250/300mm, remove the burnt winding, cleaning the slots and rewinding the fan with supper enammeled copper wire of same wire gauge, varnishing after winding, drying, replacing unserviceable fan bush/bearings, greasing, replace of armeture coil with complete shaft, soldering the copper terminal of winding with single core copper multistraded wire of 0.5 sqmm and re-assembling fan, replace of fan capacitor 1.7/2.5mfd and making connection with fan capacitor and connector block, assembling the blades and fixing the fan in its own position to existing fan clamp with necessary Nut, bolt and washer and testing for smooth functioning after repair complete. Note : Quoted rate deems to inclusive of rate also inclusive fan bearing and transporatation charges.

S&F in replacement Exhaust fan 225 mm sweep with minimum airflow/air delivery 720 Cmh, 03 blades, light weight, rust proof body & blades, self opening louvers for protection from birds & rain water, IP-55, 230 Volt AC supply, rated power input not more that 45watt, connecting up including provison of cable from ceiling rose to fan, Similar to Model : Drift AIR of Crompton Greaves, , Note: Old UNSV ceiling fans will be deposited to AGE E/M office through RV.

Supply, fixing, testing & commissioning in replacement of exhaust fan 300 mm sweep with minimum airflow/air delivery 1710 Cmh, totally enclosed heavy duty motor, die cast aluminium rotor mounted on double ball bearing, IP-55, polarity-4, 230 Volt AC supply (single phase), rated power input not more that 90watt, with louvers and connecting up including provison of PVC insulated overall PVC sheathed copper conductor cable from ceiling rose to fan, Similar to model: Transair 12" - Reversible of Crompton Greaves complete. Note: Old UNSV ceiling fans will be deposited to AGE E/M office through RV.

S&F in replacement Sheet Metal Enclosure with socket plug top and MCBs double pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240V, 20 Amps complete.

S&F in replacement 2.5 Mfd capacity capacitor electronic type for ceiling fan of existing type & sweep complete.

S&F in replacement plastic canopy of ceiling fan 1200/1400mm sweep suitable for existing complete.

S&F in replacement in repair MS clamps (Standard size) with rubber reel with MS nut, bolts, check nut & split pin suitable for ceiling fan 1200 mm sweep complate.

S&F in replacement in repairs prepainted mild steel fan blade suitable for ceiling fan of any make of 1200 mm sweep

Taking down and refixing storage type water heater (geyser) of 25/35/50 Litres capactity (any type & Make ) from wall by disconnecting the electric connection and water inlet/outlet connection from supply end checking the serviceability of all parts such as inner vessel, rubber gasket, non return valve, heating element, thermostat etc. and refixing the same after replacing unserviceable parts and reassembling complete. Note : Spare parts required to be replaced against unserviceable parts shall be measured & paid separately.:-.

S&F in replacement of heating elements, 1.5 KW 230 volts of existing type & make (Round/triangular) complete.

S&F in replacement of heating elements, 2 KW of existing type (Round / triangular) complete.

S&F in replacement of thermostat of existing type & make 15 Amps, 230/250 volts AC ISI marked complete .

S&F in replacement safety valve as per existing make and type, ISI marked complete

S&F in replacement of PVC flexible conneciton pipe with two brass check nuts & two plastic washers complete.

S&F in replacement of indicator lamp assembly LED type RED/GREEN for geyser complete

S&F in replacement of plate assembly with stainless steel plate and pipes (intel, outlet and vent) and rubber gasket fixed inside the geyser suitable for 25 ltrs capacity geysers as per existing patteern complete.

S&F in replacement of plate assembly with stainless steel plate and pipes (intel, outlet and vent) and rubber gasket fixed inside the geyser suitable for 50 ltrs capacity geysers as per existing patteern complete

M&L for Painting of geyser with white synthetic enamel paint one coat after preparation of old surfaces by scrapping rust / scales etc as required at site for Geyser 25/50 ltrs capacity including writing MES No. complete

S&F in repairs water heater of stainless steel inner tank suitable for 25/35 ltrs capacity complete.

S&F in repairs water heater of stainless steel inner tank suitable for 50 ltrs capacity complete

S&F in replacement gun metal non return valve 15 mm dia in replacement including making proper connection complete.

Dismantling damaged wooden boards of Electric meter by disconnecting all electric connection and S&F rectangular teak wood board of size 30cm x 25cm x 5cm deep with smooth hylem sheet top 5mm thick for mounting Electric Meter including making holes for incomming and outgoing wires and making necessary electrical connections complete.

S&F in repair main terminal boxes made out of GI sheet,not less than 1.2 mm thick of existing size suitable for 8"x 12" bakelite sheet housing of fittings, switches, sockets outlets, regulators etc complete including making good with existing coulor of disturbed surfase of wall complete

S&F in repair GI terminal boxes made out of GI sheet,not less than 1.2 mm thick of existing size suitable for 7"x5" bakelite sheet mountinghousing of at least one switch sockets outlets 15 Amps etc complete including making good with existing coulor of disturbed surfase of wall complete

S&F in repair GI terminal boxes made out of GI sheet,not less than 1.2 mm thick of existing size suitable for 5"x 5" bakelite sheet mounting housing of at least one switch sockets outlets 5 Amps etc complete including making good with existing coulor of disturbed surfase of wall complete

S&F in repair bakelite laminated sheat top cover 3mm thick of 8"X12" size for mounting of fittings, switches, sockets outlets, regulators etc complete including refixing seviceable switches, switch sockets and regulators etc complete

S&F in repair bakelite laminated sheat top cover 3mm thick of 7" X 4"size for mounting of switch sockets outlets 15 amp, etc complete including refixing seviceable switch sockets etc complete

S&F in repair bakelite laminated sheat top cover 3mm thick of 5" X 4" size for mounting of switch sockets outlets 5 Amp etc complete including refixing seviceable switch sockets etc complete

Supply only 0.5 sqmm PVC insulated overall PVC sheathed 3 core flexible cable for maintenance of tubelights and fans complete.

S&F in replacement Electronic ballast suitable for tube light fitting 1x36W/40W, 240V, 50/60Hz and power factor not less that 0.90 complete.

S&F in repair tube light 36W/40W tubular fluorescent lamp, Lumens 2425, 5 BEE star rating complete,

S&F in replacement Electronic ballast 18/20 watt complete

S&F in replacement tube light 18W/20W tubular fluorescent lamp complete.

S&F in replacement 9W LED Bulb suitable for B22 holder, System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >800 lm complete.

S&F in replacement 4' feet LED 1X18W LED tube rod on replacing existing 36/40watt fitting at site as per user requirement, Voltage Range:140-270 V, Frequency :50-60 HZ. The LED tube light conforms to applicable IS 10322/EN 60598, similar to Havells model No : CRYSTAL 1213T8DSTL18WLED865SGLASS complete.

S&F in replacement Modular type switch 1 way 6A, 1module, 230 V,AC 50Hz ISI Marked with valid CML No. Complete

S&F in replacement Modular type switch 1 way 20A, 1module, 230 V,AC 50Hz ISI Marked with valid CML No. Complete

S&F in replacement Modular type socket outlet multipurpose having provision for 3 pin 6A and 2 pin 6A, 2 module, 230 V,AC 50Hz ISI Marked with valid CML No. Complete

S&F in replacement Modular type socket outlet multipurpose having provision for 3 pin 16A and 3 pin 6A, 2 module, 230 V,AC 50Hz ISI Marked with valid CML No. Complete

S&F in replacement Modular type Fan step regulator electronic type, 230V,120W - 2 module ISI marked with suitable CML No and connecting upto complete

S&F in replacement Modular Bell push 6A 1 module, 230V complete

S&F in replacement PVC casing and casing with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including putting in existing copper/aluminium cables & making good to surfaces to match with existing complete

Supply, installaing, connecting and testing in replacement electronic single phase AC energy (kWh) meter of accuracy class 1.0, Rating 10-60Ams, 240 volt, 50Hz, tamper proof type, 2 wire, with LCD Display, conforming IP54, including pilfer proof meter box with sealing screw provision and electric connection with existing cable complete and duly sealed, Similar to as per model No SPPB15100000020C00 of HPL complete. Note : Old unserviceable meter shall be deposited to AGE E/M store yard throgh RV.

Supply, installaing, connecting and testing in replacement electronic three phase AC energy (kWh) meter of accuracy class 1.0, Rating 10-60Ams, 3 x 240 volt, 50Hz, tamper proof type, 2 wire, with LCD Display, conforming IP54, power consumption less than 1W including with transparent Hinge type meter box with sealing screw provision and electric connection with existing cable and duly sealed, Similar to as per model No TPPB15100000020CN0 of HPL complete. Note: Old unserviceable meter shall be deposited to AGE E/M store yard through RV.

Supply, testing and commissioning a low glare, high effeciency recessed mounted LED downlighter luminaire, Type : LED down light, systen Power consumption not more than 15W,Operating Voltage 170V-270V AC, Similar to Havells model No.EDGEPROSQDLR15WLED857S or its equivalent in Phillips/Wipro.

Supply, fixing, testing and commissioning Light source LED, Power consumption not more than 36W, Voltage 220-240V AC 50 Hz, Similar to model VENUSNEOHE2X2PLR36WLED8XXS of Havells complete

RAJENDRASINH B THAKOR