Installation of 2X63KVA Transformer inc extension of HTLT line by UG cable for providing 3Phase service connection to the DTW scheme at Karaimura under ESD III, Bordowali and Adarshapara under ESD Amtali under AMRUT Scheme under the jurisdiction of

Amount

(Supply & Erection)

Carriage of. of 9.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required a) Upto the lead range 25 KM i) For maximum 8 (eight) poles

Carriage of 9.0mtrs length of P.C.C Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis,including loading, unloading and stacking as a) Upto the lead range 25KM, i) For maximum 4 (four) poles

Carrying of the store materials from Electrical Store Sub-Division, AD Nagar, Agartala to ESD- Amtali storeyard by mechanical transport i/c loading unloading & stacking etc. Upto the lead of 25 KM

Carriage of materials such as Cable,AAC, AAAC, ACSR, G.I.Wire,Cross-Arm,Stay Set,Insulators etc., by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, Upto the lead range 25KM

Carriage of 11/0.430, 3-Phase 63KVA by Mechanical Transport from the Site /Store/Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required,, Beyond 25 KM upto the lead of 50KM

Erection of 9,mtrs length of Steel Tubular POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect

Erection of M.S.Angle Cross-Arm, 2.8 Mtr. Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm, 1.5 Mtr. Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 0.3 Mtr. Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 1.2 Mtr. Long75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 2.2 Mtr. Long75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 2.8 Mtr. Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 2.8 Mtr. Long 100 x50 x 50 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm, 0.8 Mtr. Long 100 x50 x 50 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing including supply of G.I.Pipe, Salt & Charcoal, GI wire, nuts &bolts, etc. as required)

Erection of 11 KV Pin insulator along with Pin.

Erection of 11 KV Single Disc insulator set along with necessary fittings

Erection of shackle insulator of size 75mm x 90mm /100mm X 15mm with straps & bolts/ U-clamp on poles (Excluding the cost of straps / U- clamp, Nuts & bolts).

Installation/Positioning of 11/0.430KV,3-Phase 63KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Laying & Stringing of 1 KM (Single Conductor) ACSR 6/1/3.35 mm dia 'RABBIT' including hoisting & binding etc. Complete as required.

Laying & Stringing of 1 KM (Single Conductor) ACSR 6/1/2.59 mm dia 'WEASEL' including hoisting & binding etc. Complete as required.

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification.

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification (Excluding the cost of back clamp,Nuts & Bolts)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required., Trench Size: Width-350mm, Hieght-1200mm / Sand (couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks, Upto 120 sq. mm

Manually digging /drilling horizontally or diagonali direction for road crossing I Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 11OOmm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering ln Charge

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 11 KV grade of all size in the GI Pipe/HDPE for riser including tieup of Pipe with pole by the help MS Flat Clamp (excluding cost of Clamp and Nut&Bolts) as required Up to 400 sq. mm

Jointing of Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 70 sq.mm ,3 core XLPE aluminium conductor cable of 11kv Graded.

Providing of Pre-cast cement concretecable identification route marker (1 cement: 2 coarse sand 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1: 3( 1 cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker shall be embossed "DANGERS: TSECL, ELECTRIC POWER CABLE" with Black colour letter(both side). The visible part shall be painted with Yellow colour japan paint. (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 :3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

Manually digging /drilling horizontally or diagonali direction for road crossing I Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 11OOmm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering ln Charge

Providing Three Phase Service Connection with laying PVC cable from nearby Electrical pole to Premises upto 35mtr. in length supported by G.I.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required .

Gouting of ST pole /Stay set with CC of ratio 1:2:4 (1Cement:2 river sand: 4 jhama brick aggt. Of 20mm nominal size ) in/c supply of cement, sand & brick aggt. Of 20mm nominal size complete with excavation , riffiling of earth, ramming along with centering & shuttering as reqd. @ 0.273 Cum per ST pole as per TSECL specification.

Maintaining adequate clearance from overhead live conductors by Trimming of tree branches for Way Leaves

Supply of Wooden Plank (24"X10'X1.5"size)

Supply of fabricated MS bracket & stay Clamp (made by 50X6mm flat)

Supply of MS Nuts & Bolts (16mm dia) ( assorted size)

Supply of 1/2 " dia Polythine Pipe

Supply of 110 mm dia HDPE Pipe, wall thickness: minimum 7.4mm, maximum- 8.2mm (medium class)

Supply of Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 50/70sq.mm ,3 core XLPE aluminium conductor cable of 11kv Graded.

Supply of XLPE Power cable 11KV Grade 3-core, 120 sqmm

Supply of fabricated M.S.Angle Cross-Arm, 2.8 Mtr. Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Supply of fabricated M.S.Angle Cross-Arm, 1.5 Mtr. Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Supply of fabricated M.S.Channel Cross-Arm, 0.3 Mtr. Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Supply of fabricated M.S.Channel Cross-Arm, 1.2 Mtr. Long75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Supply of fabricated M.S.Channel Cross-Arm, 2.2 Mtr. Long75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Supply of fabricated of M.S.Channel Cross-Arm, 2.8 Mtr. Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Supply of fabricated M.S.Channel Cross-Arm, 2.8 Mtr. Long 100 x50 x 50 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Supply of fabricated M.S.Channel Cross-Arm, 0.8 Mtr. Long 100 x50 x 50 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

KAJAL DAS