Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹22.2 L+₹1.5 L (7.23%)Rejected-AOC 32 LOOTERY MOHAL ORDERLY BAZAR PO BARRACKPORE DIST 24 PARGANAS NORTH KOLKATA 700 120 W B | KOLKATA | 24 PARGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-AOC High Rate | |
| 3 | L3₹22.7 L+₹2.0 L (9.65%)Rejected-AOC 72 5 53 PIPE ROAD PO BARRACKPORE DIST 24 PARGANAS NORTH PIN 700120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L3 | Rejected-AOC High Rate | |
| 4 | L4₹23.0 L+₹2.3 L (11.0%)Rejected-AOC SADAR BAZAR PRINZE ROAD SAHANTOSHREE PALLY PHASE II P O P S BARRACKPORE DIST 24 PARGANAS NORTH KOLKATA 700 120 WB | KOLKATA | 24 PARGANAS NORTH | WEST BENGAL | 700120 | L4 | Rejected-AOC High Rate | |
| 5 | L5₹23.6 L+₹2.9 L (14.1%)Rejected-AOC | L5 | Rejected-AOC High Rate |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
2 Feb 2022, 6:00 pmClosed
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
REPAIRS TO FOOT PATH, HARD STANDING, CULVERTS AND AREA DRAINAGE FENCING AT JAFFARPORE , KANCHRAPARA
2021_MES_488103_1
8345/BKP/AF OF 2021-22
Open Tender
Civil Works
Item Rate
180 days
GE AF Barrackpore
Pl refer tender documents
5 documents required · 5 mandatory
₹500
GE AF Barrackpore
₹40,000
Yes
8 Feb 2022
15 Jan 2022
4 Feb 2022
15 Jan 2022
2 Feb 2022
28 Jan 2022
Amount
Demolition of cement concrete (un-reinforced) in ground floor and pavings n.exc. 15cm thickness (below or above ground level) complete all as spd and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in any position.
Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc
Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water etc
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.
Dismantling fencing wire mesh, of any type.
Dismantling posts or struts (wood steel or R.C.C) any section including taking out embedded portion in concrete and making good disturbed ground.
Excavating post holes or similar holes each not exceeding 0.5 Cu M. getting out in soft/loose soil and removing surplus soil to a distance n.exc 50 mtr and making good the surface complete all as specified and directed.
M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M & L for cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (20mm graded aggregate) as in coping, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as spd and directed.
M&L for precast RCC 1:2:4 type B1(20 mm graded agregate) in landings, cover slabs, chullha hoods, chajjas, water troughs, shelves and similar articles of any thickness and any size as required at site set jointed and pointed in cement mortar 1:4 complete all as spd and directed.
M&L providing reinforced cement concrete type B-1, 1:2:4(20mm graded aggregate)in precast posts fencing post struts etc for fencing, average sectional area exc 100 sqcm and n exc 250 sqcm complete all as spd and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moudls mitred/stopped end etc complete all as spd and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc.6 mtr mean radius built in cement mortar (1:6) complete all as spd and directed.
All as per item No 15 here in before but except bricks.
M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4). Complete all as spd and directed.
M&L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping ends and binding with and incl. mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as spd and directed.
All as per item No 18 here in before but 5 mm dia and over upto and including 10mm dia as in stirrups.
S&F Mild steel work in hand rails, half round or other steel section or core for door,baluster, nosing to step including embeding in concrete and scrwing etc. Wind ties for roof including securing bolts, post and shrrtus in fencing including cutting tops to shape as directed drilling holes notching for wire, etc.) including all necessary drilling bolting or riveting etc. and similar work conforming to Fe- 290 Gde E-165. Complete all as spd and directed.
S&f mild steel screw bolts of 05 to 10 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long.
S&F in repair Galvanised 2 strand Steel Barbed wire 2.24 mm dia barbed with 2mm dia bards at 75 mm spacing and fixing to any type of stanining ang fixing to any type of standard rails straining ang bolts, including securing or typing at crossing with and provision of galxvanised mild steel wire, staples or steel pins, etc. as directed each.
Supply only 3.15mm dia Chain link MS galvanised fencing of size-100x 100mm Complete all as spd and directed.
Supply only 4mm dia Galvanised iron line wire.
Fixing only chain link fencing including line wire, any mesh size and type to any type of standards rails straining bolt, etc. including provision of bindings wire.Complete all as spd and directed.
M&L for sign board at different location made of stainless sheet of thickness 2.0mm and approved color sticker on front side of stainless sheet and lettering made with retro reflective sheet (encapsulated lens type) in approved color over the sticker which stick on screwed to frame (Note: Frame work will be measured and paid separately, under relevant items here in before.
M&L for 75 mm thick PCC (1:3:6) type C-2, (using 40 mm graded stone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as spd and directed.
M&L for 100 mm thick PCC (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in floors and pavings etc finished surfaces even and fair without using extra cement. complete all as spd and directed.
M&L for joint free anti skid outdoor pavement tiles (good grip series) of size 300 mm x 300mm x 10mm thick, coloured, set jointed and pointed in neatcement slurry with grey cement & pigment as in floor, path etc over and including 15mm thick screed bed in CM (1:6) complete all as spd and directed.
S&F Machine pressed concrete interlocking paver block of any shape and size conforming to IS 15685 2006 of 80 mm thickness M-40 Grade with grey cement and pigment over and including 30mm thick sand cushioning complete all as spd and directed.
M&L for 15 mm thick cement plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as spd and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of weather coat exterior paint over a coat of exterior primer complete all as spd and directed.
M&L for preperation of newly plastered surface and applying two coats of cement base paint complete all as spd and directed.
M&L for preparing new steel surfaces of any description nexc 10cm width or girth and applying two coats of synthtic enamel paint over a coat of red oride primer complete all as spd and directed.
Das and Brothers
PIONEER
ONIEL SALES
KAZI ENTERPRISE
VIVEKANANDA TRADERS
JAGATRAM CONSTRUCTION
M/S A. J. CONSTRUCTION
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .