Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹27.2 LAccepted-AOC | 1 | Accepted-AOC AWARDED BEING THE LOWEST TENDERER | |
| 2 | 2₹31.6 L+₹2.7 L (9.49%)Rejected-Finance | 2 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER | |
| 3 | 3₹32.0 L+₹3.1 L (10.7%)Rejected-Finance HOUSE NO 36 93 354 9 INDIRA NAGAR 5 NH 16 KANCHARAPALEM POST VISAKHAPATNAM 530 008 | VISAKHAPATANAM | ANDHRA PRADESH | 530008 | 3 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER | |
| 4 | 4₹34.1 L+₹5.2 L (18.0%)Rejected-Finance | 4 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER | |
| 5 | 5₹35.3 L+₹6.4 L (22.1%)Rejected-Finance | 5 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER |
| Sl No | Description | Qty | Unit | KALPANA INFRA PROJECTS L1 | SREE DURGA INFOTECH L9 | KANAKAJYOTHI ENTERPRISES L6 | Sri Jaya Surya Techs L8 | SAMPATH ENTERPRISES L3 | P JAGANNADHARAJU L5 | VEEKSHITH ENTERPRISES L4 | LALITHA SAI INFRA L10 | DELTA CONSTRUCTIONS L2 | ANAND ENTERPRISES AND ENGINEERS L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down and dismantling the ceiling fan 1200 / 1400 mm sweep of any capacity from existing position and removing its allied spare parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers etc complete including provn flexible copper conductor cable of 24 / 0.20mm of required length with necessary connector (for blade / body) as required after rewinding (if any) complete all as specified and directed.
(Note : (i) Spare parts shall be measured and paid seperately as supply only and rewinding of fan shall be measured and paid seperatly under relevant item here-in-below. (ii) The cleaning, servicing, oiling and lubricating of fans has to be carried at site itself and to be completed within one hour unless re-winding is required. (iii) The cost of transportation from site of work to workshop and back for rewinding is deemed to be included in the unit quoted rate, (iv) Rewinding shall be carried out in contractor's workshop and fan shall be re-fixed at site within 10 days after taking down from site. Any delay after 10 days shall be penalised @ Rs. 100.00 per day for a maximum of 10 days). | 2,688 | Each | 45 ₹1,20,960 Lowest | 155 ₹4,16,640 | 126 ₹3,38,688 | 140 ₹3,76,320 | 90 ₹2,41,920 | 100 ₹2,68,800 | 96 ₹2,58,048 | 225 ₹6,04,800 | 120 ₹3,22,560 | 140 ₹3,76,320 |
| 2.00 | All as per Serial item No. 01 above but exhaust fan of 225 to 600mm sweep of any capacity complete ditto. | 667 | Each | 45 ₹30,015 Lowest | 155 ₹1,03,385 | 140 ₹93,380 | 145 ₹96,715 | 100 ₹66,700 | 110 ₹73,370 | 100 ₹66,700 | 225 ₹1,50,075 | 160 ₹1,06,720 | 145 ₹96,715 |
| 3.00 | All as per Serial item No. 01 above but air circulators/ pedestal fan/ wall mounting fan of any sweep and any capacity complete ditto. | 60 | Each | 45 ₹2,700 Lowest | 160 ₹9,600 | 153 ₹9,180 | 145 ₹8,700 | 100 ₹6,000 | 125 ₹7,500 | 125 ₹7,500 | 225 ₹13,500 | 180 ₹10,800 | 165 ₹9,900 |
| 4.00 | M & L for rewinding of Ceiling fan of any sweep after dismantling with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including necessary insulating materials, insulating varnishing, cleaning, packing and reassembling and testing etc complete all as specified and as directed. ( Note: Also refer Note No. (iv) under Serial item No. 01 above) | 2,045 | Each | 457 ₹9,34,565 | 450 ₹9,20,250 | 410 ₹8,38,450 | 420 ₹8,58,900 | 400 ₹8,18,000 | 370 ₹7,56,650 | 350 ₹7,15,750 | 470 ₹9,61,150 | 340 ₹6,95,300 Lowest | 435 ₹8,89,575 |
| 5.00 | All as per serial item No. 04 above but exhaust fan of 225 to 300mm sweep complete ditto | 350 | Each | 299 ₹1,04,650 Lowest | 510 ₹1,78,500 | 500 ₹1,75,000 | 525 ₹1,83,750 | 400 ₹1,40,000 | 490 ₹1,71,500 | 490 ₹1,71,500 | 510 ₹1,78,500 | 360 ₹1,26,000 | 510 ₹1,78,500 |
| 6.00 | All as per serial item No. 04 above but exhaust fan of 450 to 600mm sweep complete ditto | 72 | Each | 299 ₹21,528 Lowest | 1,800 ₹1,29,600 | 1,440 ₹1,03,680 | 1,750 ₹1,26,000 | 600 ₹43,200 | 1,400 ₹1,00,800 | 1,400 ₹1,00,800 | 905 ₹65,160 | 610 ₹43,920 | 1,600 ₹1,15,200 |
| 7.00 | All as per serial item No. 04 above but PVC exhaust fan of up to 300 mm sweep complete ditto | 245 | Each | 299 ₹73,255 | 320 ₹78,400 | 320 ₹78,400 | 350 ₹85,750 | 350 ₹85,750 | 300 ₹73,500 | 300 ₹73,500 | 332 ₹81,340 | 270 ₹66,150 Lowest | 330 ₹80,850 |
| 8.00 | All as per serial item No. 04 above but aircirculator/ pedestal fan/ wall mounted fan up to 600 mm sweep complete ditto | 60 | Each | 299 ₹17,940 Lowest | 1,800 ₹1,08,000 | 1,440 ₹86,400 | 1,800 ₹1,08,000 | 550 ₹33,000 | 1,400 ₹84,000 | 1,400 ₹84,000 | 505 ₹30,300 | 700 ₹42,000 | 1,600 ₹96,000 |
| 9.00 | Supply only ball bearing set of two suitable for Ceiling fan of any sweep complete all as per the existing specifications and as directed
(Make :TATA/ SKF / NBC) | 2,045 | Each Set | 27 ₹55,215 Lowest | 130 ₹2,65,850 | 99 ₹2,02,455 | 125 ₹2,55,625 | 100 ₹2,04,500 | 80 ₹1,63,600 | 80 ₹1,63,600 | 105 ₹2,14,725 | 70 ₹1,43,150 | 110 ₹2,24,950 |
| 10.00 | Supply only ball bearing suitable for exhaust fan of any sweep complete all as per the existing specifications and as directed
(Make : TATA/SKF / NBC) | 667 | Each Set | 27 ₹18,009 Lowest | 135 ₹90,045 | 99 ₹66,033 | 125 ₹83,375 | 100 ₹66,700 | 82 ₹54,694 | 82 ₹54,694 | 105 ₹70,035 | 60 ₹40,020 | 100 ₹66,700 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
28 Oct 2025, 6:00 pmClosed
GARRISON ENGINEER (NAVAL BASE)
GARRISON ENGINEER NAVAL BASE GANDHIGRAM POST VISAKHAPATNAM 530005
SERVICING AND REPAIRS OF CEILING FANS, EXHAUST FANS, WALL MOUTING FANS, PEDESTAL FANS, GEYSERS HEATING APPLIANCES AND ALIED WORKS IN NAVAL PARK, NEW AND OLD NAUSENABAUGH, INHS KALYANI, SATAVAHANA, SAUW, VIRBAHU, DOCKYARD AREA, NAUSAINIK VIHAR
2025_MES_733896_1
C/8511/25-26/E8 TOKEN 32 OF 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
VISAKHAPATNAM
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER NAVAL BASE
₹90,000
Yes
3 Jan 2026
6 Oct 2025
4 Nov 2025
6 Oct 2025
28 Oct 2025
21 Oct 2025
Amount
Taking down and dismantling the ceiling fan 1200 / 1400 mm sweep of any capacity from existing position and removing its allied spare parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers etc complete including provn flexible copper conductor cable of 24 / 0.20mm of required length with necessary connector (for blade / body) as required after rewinding (if any) complete all as specified and directed. (Note : (i) Spare parts shall be measured and paid seperately as supply only and rewinding of fan shall be measured and paid seperatly under relevant item here-in-below. (ii) The cleaning, servicing, oiling and lubricating of fans has to be carried at site itself and to be completed within one hour unless re-winding is required. (iii) The cost of transportation from site of work to workshop and back for rewinding is deemed to be included in the unit quoted rate, (iv) Rewinding shall be carried out in contractor's workshop and fan shall be re-fixed at site within 10 days after taking down from site. Any delay after 10 days shall be penalised @ Rs. 100.00 per day for a maximum of 10 days).
All as per Serial item No. 01 above but exhaust fan of 225 to 600mm sweep of any capacity complete ditto.
All as per Serial item No. 01 above but air circulators/ pedestal fan/ wall mounting fan of any sweep and any capacity complete ditto.
M & L for rewinding of Ceiling fan of any sweep after dismantling with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including necessary insulating materials, insulating varnishing, cleaning, packing and reassembling and testing etc complete all as specified and as directed. ( Note: Also refer Note No. (iv) under Serial item No. 01 above)
All as per serial item No. 04 above but exhaust fan of 225 to 300mm sweep complete ditto
All as per serial item No. 04 above but exhaust fan of 450 to 600mm sweep complete ditto
All as per serial item No. 04 above but PVC exhaust fan of up to 300 mm sweep complete ditto
All as per serial item No. 04 above but aircirculator/ pedestal fan/ wall mounted fan up to 600 mm sweep complete ditto
Supply only ball bearing set of two suitable for Ceiling fan of any sweep complete all as per the existing specifications and as directed (Make :TATA/ SKF / NBC)
Supply only ball bearing suitable for exhaust fan of any sweep complete all as per the existing specifications and as directed (Make : TATA/SKF / NBC)
Supply only ball bearing suitable for air circulator/ pedestal fan/ wall mounting fan of any sweep complete all as per the existing specifications and as directed (Make : TATA/SKF / NBC)
Supply only shackle and clamps including rubber bush, bolts, nuts, washer and split, canopies etc suitable for ceiling fan of any sweep complete all as per the existing specifications and as directed
Supply only bolts, nuts with frame and washers etc suitable for exhaust fan of any sweep complete all as per the existing specifications and as directed
Supply only fan capacitors of 2.5 Mfd complete all as specified and as directed. (Make : Havells/USHA/TIBCON)
Supply only fan capacitors of 4 Mfd complete all as specified and as directed. (Make : Havells/USHA/TIBCON)
Supply only brass bush suitable for ceiling fan of any sweep and capapcity complete all as per existing specification and as directed.
Supply only brass bush suitable for exhaust fan of any sweep and capacity complete all as per existing specification and as directed.
Supply only MS down rod of size 15 mm bore, 12" (1.00 ft) long to bear the load of 1000 Kg for ceiling fan of any sweep and capacity complete all as per existing specification and as directed.
Supply only MS down rod of size 15 mm bore, 24" (2.00 ft) long to bear the load of 1000 Kg for ceiling fan of any sweep and capacity complete all as per existing specification and as directed.
Supply only MS down rod of size 15 mm bore, 36" (3.00 ft)long to bear the load of 1000 Kg for ceiling fan of any sweep and capacity complete all as per existing specification and as directed.
Supply only MS down rod of size 15 mm bore, 48"(4.00 ft) long to bear the load of 1000 Kg for ceiling fan of any sweep and capacity complete all as per existing specification and as directed.
S & F in repairs of BLDC fan PCB board as suitable for existing BLDC fans including testing complete all as specified and directed. Make : PCB board shall be of same make provided by OEM and shall come with warranaty/replacement
Supply only rust proof aluminium alloy power coated metal blades set suitable for ceiling fan 1200 / 1400 mm sweep any make complete all as per existing specification and as directed.
Supply only metal blades set suitable for exhaust fan 220mm to 450 mm sweep of any make complete all as per existing specification and as directed.
Supply only plastic blades set suitable for bathroom exhaust fan upto 300 mm sweep of any make complete all as per existing specification and as directed.
S & F in repairs steped type modular fan regulator ,100/120 W, 1/2 module complete all as specified and as directed.
S & F in repairs steped type fan regulator,flush type ,100/120 W, complete all as specified and as directed.
S & F in repairs stationary louvers suitable for exhaust fan of 300mm sweep made out of powder coated aluminium anodised sheet of Min 1mm thick with non removable blades fixed permanantly at 45 degree angle for protection from rain including aluminium wire mesh of suitable size for bird control Complete all as per the existing specification and as directed. (Note: Louver has to fixed upto sixty metre height multistoried building. The unit quoted rate shall deemed to be inclusive of necessary scafolding and safety measure for fixing of louver upto sixty metre height. No extra claim on this account shall be entertained later on)
M & L for preparation of old painted surfaces of ceiling fan of any size/sweep/make, cleaning all dust etc and painting with one coat of synthetic enamel (1st grade quality white) paint by spraying including filling cavities with filler and marking same MES No. with parmanent marker etc complete all as directed. (Note: The ceiling fan taken down under Serial item No. 01 shall be painted and measured under this item.)
M & L for preparation of old painted surfaces of exhaust fan of any size/sweep/make, cleaning all dust etc and painting with one coat of synthetic enamel (1st grade quality white) paint by spraying including filling cavities with filler and marking same MES No. with parmanent marker etc complete all as directed. (Note: The exhaust fan taken down under Serial item No. 02 shall be painted and measured under this item.)
M & L for preparation of old painted surfaces of air circulator/ pedestal fan/ wall mounting fan of any size/sweep/make, cleaning all dust etc and painting with one coat of synthetic enamel (1st grade quality white) paint by spraying including filling cavities with filler and marking same MES No. with parmanent marker etc complete all as directed. (Note: The air circulator/ pedestal fan/ wall mounting fan taken down under Serial item No. 03 shall be painted and measured under this item.)
Taking down the ceiling fan of any size/sweep/make from existing position dismantling blades including preparation of old painted surfaces of ceiling fan of any size/sweep/make, cleaning all dust etc and painting with one coat of synthetic enamel (1st grade quality white) paint by spraying including filling cavities with filler and marking same MES No. with parmanent marker, refixing the blades and rehanging the fan in its original position,connecting up etc complete all as directed.
Taking down the exhaust fan of any size/sweep/make from existing position dismantling blades including preparation of old painted surfaces of exhaust fan of any size/sweep/make, cleaning all dust etc and painting with one coat of synthetic enamel (1st grade quality white) paint by spraying including filling cavities with filler and marking same MES No. with parmanent marker, refixing the blades and rehanging the fan in its original position,connecting up etc complete all as directed.
Taking down the air circulator/ pedestal fan/ wall mounting fan of any size/sweep/make from existing position dismantling blades including preparation of old painted surfaces of ceiling fan of any size/sweep/make, cleaning all dust etc and painting with one coat of synthetic enamel (1st grade quality white) paint by spraying including filling cavities with filler and marking same MES No. with parmanent marker, refixing the blades and fan,connecting up complete all as directed.
Supply, fix, installation and commissioning BLDC ceiling fan of less noise, silent operation, speed controlable by regulator, light colour, conforming to IS-374-2019, 1200 mm sweep, 230 Volts, BEE 5 Star rating, any Govt recognised Lab tested, power factor >0.94 Wattage and not more than 35 Watt, air delivery not less than 215cmm alongwith electronic type regulator and all accessories such as down rod etc and connecting up with 1.5 Sqmm, PVC insulated, multistranded copper conductor cables from ceiling rose to fan including taking down old unserviceable ceiling fan from its existing position and removing to MES store yard complete all as specified and directed. (Note: Ceiling fan should have minimum 2 years manufacturer's warranty) (Make : USHA/Havell's/Bajaj/CG)
S & F Exhaust fan, 300 mm sweep, heavy duty, metal body 1400 RPM, AC, single phase, complete with all accessories and louver and electric connection including taking down old unserviceable exhaust fan from its existing position and removing to MES store yard complete all as specified and directed
S & F PVC body Exhaust fan, 250 mm sweep, AC, single phase complete with all accessories and electric connection including taking down old unserviceable exhaust fan from its existing position and removing to MES store yard complete all as specified and directed
S & F in repair bearing of existing BLDC ceiling fan of 1200 mm sweep,230 volts including testing complete all as specified and directed
DELTA CONSTRUCTIONS (BID ID -3460930)
SAMPATH ENTERPRISES (BID ID -3459876)
VEEKSHITH ENTERPRISES (BID ID -3461645)
P JAGANNADHARAJU (BID ID -3461172)
KANAKAJYOTHI ENTERPRISES (BID ID -3461372)
ANAND ENTERPRISES AND ENGINEERS (BID ID -3461698)
Sri Jaya Surya Techs (BID ID -3461564)
SREE DURGA INFOTECH (BID ID -3461182)
LALITHA SAI INFRA (BID ID -3461002)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
BOQ_821734.xls
BOQ • 0.34 MB
Tender_8511.pdf
Tender Documents • 1.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .