Interior Works for Existing Administrative Building Ground Floor and First Floor at Siliguri Marketing Terminal

Amount

INTERNAL WALL PARTITION: Providing and fixing internal wall panels on Light gauge steel frame work with 12mm thick WP plyboard on both sides with Laminate Finish as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(Glass Portion of upto 5 sqft is not to be measured separately.)

GLAZED PARTITION: Glazed partition with 12mm thick glass (clear)as per drawing. Glazed Partition Frame is of 19mm BWP Plywood Frame. The edges of cutout and the top edge of glass are to be mirror polished and to be fixed to partition as per fixing details. The exposed edges shall be finished in mirror polish.

STORAGE CABINETS (OPEN TYPE): Providing and fixing in position Cabinet/OPEN-400m Deep Storage as shown in drawing respectively using 19mm BWP plywood of required thickness finished with 1mm thick laminates as shown in the drawing. All exposed plywood surfaces to be finished with 1mm thick laminate of approved make and shade and all exposed edges of plywood to have 19mm x 10mm teakwood lipping, all exposed teakwood section to be polished. All necessary hardware and fittings in stainless steel finish. (Front-Elevation Area to be measured)

STORAGE CABINETS (CLOSED TYPE): Providing and fixing in position full height storage/low height storage/back storage (credenza) as shown in drawing respectively using 19mm BWP plywood of required thickness finished with 1mm thick laminates as shown in the drawing. All exposed plywood surfaces to be finished with 1mm thick laminate of approved make and shade and all exposed edges of plywood to have 19mm x 10mm teakwood lipping, all exposed teakwood section to be polished. All necessary hardware and fittings in stainless steel finish. (Front-Elevation area to be measured)

RECEPTION TABLE: Providing and fixing in position Reception Table 6' x 3' as shown in drawing respectively using 19mm BWP plywood of required thickness finished with 1mm thick laminates as shown in the drawing.Inside of drawers will be plain white 0.8mm laminate. Handle will be S/S Profile type and including fixing Keyboard Drawer and wire manager slot. One No. Lockable Drawer for each Table. Top Portion shall be made of Corian as per Design.

MANAGER's TABLE: Providing and fixing in position Manager Table 6' x 2' 6"as shown in drawing respectively using 19mm BWP plywood of required thickness finished with 1mm thick laminates as shown in the drawing.Inside of drawers will be plain white 0.8mm laminate.Handle will be S/S Profile type and including fixing Keyboard Drawer and wire manager slot. One No. Lockable Drawer for each Table.

GYPBOARD CEILING: Supplying,fitting,fixing and painting where necssary (one coat primer and two coats of paint)M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm)along with perimeter of ceiling,screw fixed to brick wall/partition with the help of nylon sleeves and screws,at 610mm c/c.then suspending G.I.intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each)from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knueled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermidiate channel at 457mm c/c,9.5mm/12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long dry wall screws at 230mm c/c.screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally the boards are to be jointed and finished so as to have a Flush look which includes filling and finishing the tapered and squar edges of the board with jointing Compound, joint paper tape, and two coat of drywall top coat suitable for Gypboard complete at all levels as specified and directed . (For light finishing, providing opening for doors, windows, ventilators etc. cut out made with the frame of perimeter channel supported suitably to be measured and paid suitably when necessary).

SHUTTERS: Providing and fixing ISI marked Flush Door Shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. Doors will be finished with 1.0 mm laminate on both sides. 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

PATCH FITTED GLASS DOOR: Providing Patch Fitted Glass Doors with Openable & Fixed Portion as per Design. 12 mm thick Clear Float Glass fully toughened for Patch Fitting Doors

VERTICAL BLINDS: Providing and fixing Vertical blinds (Fabric-Not Cotton) to windows all complete. The sample of material/ colour has to be approved before execution.

Supplying, fitting, fixing Aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (Anodised to bright natural matt & satin finished ). Mortice Lock Vertical type (100mm Godrej with handle-6 lever)

WALL PAINTING: Wall Putty with Scraping and sand papering the wall surface smooth including necessary repairs to scratches.

WALL PAINTING: Distempering (one coat) with oil bound distemper of approved brand and manufacture and of required shade on old wall surface to give an even shade, after thoroughly brooming the surface free from dirt, loose scales and other foreign matter and also including preparing the surface even and sand papered smooth.

WALL PAINTING: Extra over item no. 230 above for every subsequent coat of distempering with oil bound distemper of approved brand and manufacture.

Wiring for light point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FRLS conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed /above ceiling conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia or equivalent make as approved by the Deptt.) including 6 Amp modular switch (MK/ Legrand or equivalent make as approved by the Deptt.) fixed in suitable size sheet metal flush box suitable for modular switches and covered with modular switch plates and all necessary components as approved by the Deptt. Short point upto 3.00 metre length

Wiring for light point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FRLS conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed /above ceiling conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia or equivalent make as approved by the Deptt.) including 6 Amp modular switch (MK/ Legrand or equivalent make as approved by the Deptt.) fixed in suitable size sheet metal flush box suitable for modular switches and covered with modular switch plates and all necessary components as approved by the Deptt. Medium point upto 6.00 metre length

Wiring for light point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FRLS conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed /above ceiling conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia or equivalent make as approved by the Deptt.) including 6 Amp modular switch (MK/ Legrand or equivalent make as approved by the Deptt.) fixed in suitable size sheet metal flush box suitable for modular switches and covered with modular switch plates and all necessary components as approved by the Deptt. Long point upto 10.00 metre length

Wiring to 5/6 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps modular plug socket and 6 Amps modular switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), fixed in suitable size sheet metal flush box suitable for modular switches and covered with modular switch plates including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Short point upto 3.00 metre length

Wiring to 5/6 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps modular plug socket and 6 Amps modular switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), fixed in suitable size sheet metal flush box suitable for modular switches and covered with modular switch plates including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Medium point upto 6.00 metre length

Wiring to 5/6 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps modular plug socket and 6 Amps modular switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), fixed in suitable size sheet metal flush box suitable for modular switches and covered with modular switch plates including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Long point upto 10.00 metre length

Wiring to 5 pin 6 Amps plug point as above when fixed on the same switch board for light switches

Wiring for 5/6 pin 16 Amps power plug point with 2 X 4 sq. mm.+ 2.5 sq mm Earth P.V.C. insulated single core unsheathed industrial (Multistrand) cable FRLS conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type modular socket outlets and 16 Amps flush type modular switch ( MK/ Legrand or equivalent make as approved by the Deptt.), fixed in suitable size sheet metal flush box suitable for modular switches and covered with modular switch plates earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG or equivalent make as approved by the Deptt. Medium point upto 6.00 metre length

Wiring for 5/6 pin 16 Amps power plug point with 2 X 4 sq. mm.+ 2.5 sq mm Earth P.V.C. insulated single core unsheathed industrial (Multistrand) cable FRLS conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type modular socket outlets and 16 Amps flush type modular switch ( MK/ Legrand or equivalent make as approved by the Deptt.), fixed in suitable size sheet metal flush box suitable for modular switches and covered with modular switch plates earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG or equivalent make as approved by the Deptt. Long point upto 10.00 metre length

Supply, delivery, installation & testing of 16A plug boards consisting of a 1 nos 16A clip-in type modular switch with indicator and One 6A clip-in type modular shuttered plug socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.(Without copper wire) (for AC)

Supply, Instalation and testing of 32A AC starter fixed fixed on metallic/Polycarbonate concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.(Without copper wire) (for AC)

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial flexible cable conforming to IS-694: 1990 with flexible bright annealed copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabelor Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 2 mm thick conduit (Berlia/ AKG or equivalent make as approved by the Deptt.) wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial flexible cable conforming to IS-694: 1990 with flexible bright annealed copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabelor Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 2 mm thick conduit (Berlia/ AKG or equivalent make as approved by the Deptt.) wiring system. With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supply, delivery, installation & testing of 6A plug boards consisting of a 2 nos 6A clip-in type modular switch with indicator and two 6A clip-in type modular shuttered plug socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.(Without copper wire) (for computer)

Supply & installation of 24 port patch panel Cat-6 (D-link) with rack

Installation, testing & commissioning 24 port 10/100 Hub switch (D-link)

Supply & fixing of 3 ft patch cords Cat-6

Supply & fixing of 7 ft patch cords Cat-6

SITC of Data (RJ45) single outlet of havel/Mkand conceled I/O boxes with front modular plate etc. in/on walls/furniture etc with all respect

Testing & certification of Data outlet & UTP cable for entire

Wiring with CAT-6 Cable in surface/ recessed /above ceiling conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including I/O Box

Supplying with fitting and fixing MCCB incomer and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 4 way TPN (4+12) double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof IP-43 double door surface mounting vertical Per Phase Isolation (PP DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 6 way TPN (8+6+18) double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting vertical TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. (POWER DB). 6 way TPN (8+12) double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 12 way SPN double door (UPS DB)

Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCCB enclosure of the following rating MCCB fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. (For AC OUTDOOR UNIT) for 100A 3P/4P MCCB

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 6A to 32A 'C'-series',Single Pole

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 6A to 32A ,'C'-series

Supplying with fitting and fixing TP/FP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 6A to 32A TP,'C'-series

Supplying with fitting and fixing TP/FP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 40A ,'C'-series

Supplying with fitting and fixing TP/FP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 63A ,'C'-series

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 20/25A DP RCCB, 100/300mA

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 40A DP RCCB, 100/300mA

Supplying with fitting and fixing Surge protector of max operating voltage 350V at 400V network for maximum discharge current 40KA, with operator indicator and draw out cartridge of Schneider or equivalent make), of the following ways complete with making necessary connection as approved, specified and directed by the deptt. 3P with Surge protection Max operating voltage 350V integrated type

Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100A 4P MCCB (ajustable Thermal & Magnetic setting)

Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 63A 4P MCCB (ajustable Thermal & Magnetic setting) for AC outdoor unit

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in wall/above ceiling/ ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make). 25.00 Sq.mm.4Core armoured U.G. cable

Supplying with installation testing and commissioning of Hi -- wall 5 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with copper pipe and electrical connection cable, as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. 1.5 Ton Capacity

Providing and fixing 24 W LED Panel Luminaries 600 x 600 mm size of Philips make/TROFLER/Code 94051090 or Equivalant .

Providing and Fixing 7Watt COB Lights in False Ceiling / COB+ 7W by PHILIPS or Equivalant

Proving and Fixing 7Watt LED Panel ligths In Round/ULTRASLIM 7W PHILIPS or equivalant

Providing and Fixing Led Strip COVE Lights including Adapter in Gypsum Ceiling

Karrdias Techno services Pvt. Ltd.

RIGHT ADDRESS

wembley interior pvt. ltd.