REPAIR REPLACEMENT TO FLOOR JOINERY WALL AND FLOOR TILES SANITARY WATER SUPPLY FITTING AND ALLIED WORKS ZONE VIII UNDER THE AREA OF AGE BR-I AT GE WEST BAREILLY

Amount

Dismantling posts or struts (wood, steel or RCC) any section, eincluding taking out embeded portion in concrete, brick work masonry etc. and making good disturbed ground.

Dismantling chain link fencing any type and size etc complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and directed.

M&L for PCC 1:3:6, type C2 (40mm graded stone aggreagate) as in foundation, filling, mass concrete etc.

S&F of Mild steel works as in posts, struts, gates etc., in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets/horizontal bars etc. for securing wire mesh including necessary drilling, welding, bolting or riveting etc and similar conforing to Fe 290 Gde E-165 complete.

S&F of Mild steel screw bolts (Machine Made) with hexagonal heads, bolts washers etc (5 to 10mm dia) length of bolt exc 5cm and n.exc 10cm long.

Demolition of brick or stone/boulder masonry, built in cement mortar.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 using old size bricks.

M&L for preperation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm width or girth.

-ditto- but n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint.

M&L for MS round bars, 10mm dia and over cut to length, bent to shape required including ,bending hooking ends as in straining/ woolen bar.

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel sta.

S&F in repairs galvanised 2 strand MS barbed wire 2.24 mm dia barbed with 2.00 mm dia barbs at 75 mm spacings and straining and fixing to any type of strandard rails, straining bolts, including securing or tying at crossing with and provision of galvanished mild steel wire, staples or steel pins etc (each line of wire to be measured) complete all as specified and directed.

Taking down steel gate of any size and refixing the same in position after repairs including greasing & oiling,making good loose brackets and welding work etc for proper functioning of steel gate repairs complete all as specified and directed.

Dismantling structural steel work including doors, gates excluding framed trusses etc complete all as specified and directed.

S&F MS framed work ( partly ornamental) gde Fe 410-0 or 310-0 as in Gates of angle or other section with gusset plate, rails, braces, etc complete drilled for fixing of steel sheeting or other coverings, gates to be pre- repaired for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete to existing RCC or MS pillars/columns incl pintal hinges, stops, hand made sliding bolts etc complete. Design, size and elevation of gates shall be as directed by Engr- In - Charge.

M & L for preparing old surfaces of walls (old decorated plastered or unplastered) and applying one coat of white wash complete all as specified and directed.

M & L for preparing old surfaces of walls, cornices etc by washing , rubbing down and stopping of painted surfaces and applying one coat of cement base paint complete all as specified and directed.

M & L for preparing old surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

M & L for preparing old decorated wall surfaces and applying a coat of distemper oil emulsion complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint complete all as spd and directed by Engr-in-Charge.

Taking down hood covers of rolling shutters of area not exceeding 6 sqm loose brackets plates or guide properly greasing helical spring,shafts, and guide, channel for proper functioning of rolling shutter of any size and refixing covers in position after repairs complete all as specified and directed.

Taking down existing cement plaster in cement mortar on brick/stone masonry walls etc incl racking out joints hacking for key scru bbing down with water all as specified (internal and external surfaces of manholes, septic tanks, etc).

M&L rendering 15mm thick on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement.

M&L rendering 15mm thick on brick work or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement.

M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement

M&L for applying two coats of dry distemper over one coat of primer on newly plastered surfaces including perperation of new plastering surface

M&L for 3 coats of white wash on newly plastered ceiling surfaces including preperation

M & L for three coat of white wash on new surface of wall including preparation

M&L preparation of newly plastered surfaces and applying two coats of cement base paint on walls over a coat of primer all as specified & directed by Engr-in-Charge.

Disconnecting existing tanks exc 250 & n exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning with pressure pipe etc and hoisting if required reconnecting and refixing in position including cleaning and removing all scale and removing scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.

Disconnecting existing tanks exc 500 & n exc 1000 ltrs,setting aside (or lowering if required) for repairs, cleaning with pressure pipe etc and hoisting if required reconnecting and refixing in position including cleaning and removing all scale and removing scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.

Repairing of aluminium door/window/ ventilator wall etc of any size / any number of panels including taking down & refixing (if required) for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed by Engr-in-charge.

S & F in repairs Aluminium body (die cast) door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg.

Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F in repairs Vitreous China Ware Wash hand basin flat back, size 550x400mm in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed.

S&F for renewing floor/wall tiles in patches, area n exc 5 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed

S & F in repairs 4mm thick E-Board tiles (Everest or equivalent) in patches for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised aluminium snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

M&L for refixing of steel windows shutter including taking down the steel window shutter from the frame and adjusting and cleaning of hinges , replacement of new hinges if required and refixing it properly complete all as specified and directed

S&F in repair of steel window handle fixing with screws/ nut bolts or welding etc required at site complete all as specified and directed.

M&L for tightening and refixing of existing E- board ceiling and its framing and making good in patches complete all as specified and directed.

Refixing of old steel tubing 15mm and connections in new or old position (wall, ceiling, floors etc including taking up or down steel tubing and connections including cleaning and re fixing or removal to store complete all as specified and directed.

Refixing of old steel tubing 20mm and connections in new or old position (wall, ceiling, floors etc including taking up or down steel tubing and connections including cleaning and re fixing or removal to store complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of 15mm tubes complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in PCC or CM not exceeding 10 cm girth complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of 15mm tubes complete all as specified and directed.

Dismantling of existing water tanks capacity exc 500 ltr but n exc 1000 ltr and removing to store and S&F rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms).

Dismantling of existing water tanks capacity exc 250 ltr but n exc 500 ltr and removing to store and S&F rotational moulded polethylene water tank of 500 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I

S&F 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms).

S&F in repair 15mm bore GI tank hexa nipple complete all as specified and directed.

S& F in repair 15mm bore dia Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S& F in repair 15mm bore dia Bib taps fancy type , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore dia Stop valves with long shank and cup (concealed type) fancy type, cast copper alloy chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore dia chromium plated pillar cock swan neck type complete all as specified and directed.

S&F in repair 15mm bore dia Stop valves/angle valves fancy type, cast copper alloy chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore dia chromium plated 2 way angle cock with flange complete all as specified and directed.

S&F in repair 15mm bore dia 100mm Chromium plated overhead shower with 225 mm arm and flange complete all as specified and directed.

S&F in repair complete internal fitting for low level cistern complete all as specified and directed.

S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed on wall complete all as specified and directed.

S&F in repair 32 mm dia and 800 mm long PVC waste pipe plain type complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) including CP spreader complete all as spd and directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as spd and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L for non skid ceramic joint free colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles.

M&L for 15 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6

M & L Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - RENDERING SHALL BE MEASURED AND PAID SEPARATELY

M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for 10mm thick in CM 1:4 rendering/backing coat for skirting/dado on brick or concrete surfaces rough finished

M & L for rubber moulded chequered cement concrete tiles of size 300X 300 X 25 mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor and laid over 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.

M & L for 15-18 mm thick machine cut kota stone slab flooring and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and including 20mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of floor tile including cement mortar bedding complete all as specified or as directed.

M & L for colour printed glazed ceremic coloured tiles in vertical surface 300 x 200 x 6 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 rendering/backing coat for skirting/dado on brick or concrete surfaces rough finished complete all as specified or as directed.

M&L for 15 to 18mm thick granite (of any type and shade) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding of edges complete over and incl 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete complete all as spd and directed

M&L providing vitrified ceramic tiles light shade 10 mm thick (square/rectanglar) polished area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry over and including 20 mm thick screed bed of cement mortar in 1:6 and pointed in white or coloured cement to match coloured tiles complete all as specified

M&L providing vitrified ceramic tiles light shade 10 mm thick (square/rectanglar) polished area of each tiles not exceeding 0.36 sqm in skirting/dado etc. set and jointed in neat cement slurry over and including 10 mm thick 1:4 rendering/backing coat for skirting/dado on brick or concrete surfaces rough finished match coloured tiles complete all as specified

M & L for rubber moulded Machine pressed precast concrete interlocking paver any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade match with grey cement and pigment.

M&L for pre-cast cement concrete block masonry with solid blocks, type C1 1:3:6 (20 mm graded aggregate) exc. 10 cm in width and setting in CM 1:4 complete all as specified.

M&L for sand filling under floors or in foundations including watering and cosolidation complete all as specified.

Supply and fix in repairs Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding & 'P' traps as required in repairs

Supply and fix in repairs Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete as directed

Demolition of existing cement concrete (un reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) all as specified.

M&L for cement concrete in foundations, filling and mass concrete using type D2 1:4:8 (40mm graded stone aggregate).

M&L for plain cement concrete type C1 1:3:6 (20mm graded stone aggregate) as in copings.

M&L for plain cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in benching, finishing surfaces of concrete.

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded aggregate 25mm thick for base for laying of tiles.

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg in plinth protection, finished even and smooth w/o using extra cement.

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate in sub base of floor , finished even & fair without using extra cement.

M&L for Glass dividing strips, 3 mm thick 38mm wide as in floors

M&L for 40 mm thick cement concrete type B1, 1 : 2 : 4 (using 20 mm graded stone aggregate) in floor finishing surface with broom finishing as specified

S&F 300 mm , Mild steel ordinary rat rail rod pattern springs, including roller and roller pate complete in repairs.

M&L salt glazed stone wore gully traps square or rounded mouthed tape & fix 150 x 150 mm fiXed in cement concrete complete.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down door shutter of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.

S & F second class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S& F 35 mm thick second class hard wood glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc ( without sas bars) edge of framing plain chamfered or rounded filled with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a).

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc.

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction all as specified.

S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21.

S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised

S & F of 200 mm long (Length of bolt) mild steel barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F of 300 mm long mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed.

S & F of 150 mm long mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden frame or stone concrete or bricks surrounds glazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete.

S&F 3mm thick figured glass, pin head type andd glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of apreture 1.18 mm & fixed with tinned takce or galvanised wire staples fixed as in repairs.

Dismantling AC sheet (Corrugated/Semi-corrugated) in roof covering .

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section.

M&L 2nd class hard wood plaing fillets, square, rectagnular or triangluar in section clean sawan sectional area exc 13 & n exc 25 sq cm.

S&F 6 mm thick Asbestos cement corrugated sheet in roof, fixed with J or L hook or cranked bolt with washers.

M&L for 6mm thick Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L-type or J-type hook bolts complete all as specified and directed.

S & F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed . NOTE:- Corrugated shape of sheet shall be approved by GE

S & F of Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed . NOTE:- Corrugated shape of sheet shall be approved by GE

S&F in repair stainless steel plate rack of size 31"x 30"x 10" complete all as specified and directed.

S&F in repair stainless steel towel rail 24" Make: Bluestar Silvershine (Model No SSTR-501) complete all as specified and directed.

S&F in repair stainless steel soap dish Make: Silvershine (Model No SSD-701) complete all as specified and directed.

S&F in repair CP health fauchet with 1.5 m tube & hook complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed

S & F in repair sink with drainage board made of stainless steel 1 mm thick kitchen with plug, washers and waste, including bedding in cement mortar on to ddwarf wall or including fixinf cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410 mm x 330 mm x 160 mmm

S&F in repair 15 mm dia brass chromium plated single lever basin mixer without popup waste system with 450mm long braided hoses & base flange complete all as specified and as directed. Make - Jaquar (FLR-CHR-5001 B).

S&F in repair 15 mm dia brass chromium plated single lever wall mixer with 115 mmm long bend pipe on upper side ,connecting ,legs & wall flanges complete all as specified and as directed. Make - Jaquar (FLR-CHR-5273UPR).

S&F in repair 15 mm dia brass chromium plated single lever wall mixer with provn of both hand shower and overhead shower complete with 115 mmm long bend pipe on upper side ,conneting ,legs&wall flanges complete all as specified and as directed. Make - Jaquar (ORP-10118PM)

Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length ®

S& F for glazed aluminium door frame with side hung shutter and glazing fixed with and including 4.8mm th tinted glass and 12mm th prelaminated particle board with all aluminum necessary jointing cleat and 20 mm glazing clips rubber packing, anodized alumium fitted and maring good of wall surfaces with matching to existing surface compete all as specified and directed :- (a)Frame 100x44x1.48mm thick with rawl plug (b)Middle and lock rail :150x44x1.48mm thick (c)Bottom rail :150x44x1.48mm thick (d) Top rail/stiles :85x44x1.48mm thick (e)Aluminum beading : 0.70mm thick (f)Aluminium handle 'D' type 150mm long,alumium tower bolt 9.90mm dia shoot 200mm long, Mortice lock :100mm size 4 lever, aluminium sliding bolt : 300 mm long, aluminium floor mounted door spring.

S&F aluminium anodised window/vantilator frame with side hung shutter and glazing and including 4.80mm thick tinted glass with and including all aluminium fitting & necessary jointing cleats, glazing clip, rubber packing, anodised aluminium beading, screws, anodised aluminium fittings such as peg stay, hinges, handle 100mm long, tower bolt 100mm long, and making good of wall surface with matching to existing surface complete all as specified and directed for the following specifiecation:-. Frame : (a) 65 x 38 x 1.48mm thick (b) Top/Bottom & side style/rails of shutter : 44 x 38 x 1.98mm thick ( c) Aluminium beeding -0.8 mm thick (d) Alum fitting such as peg stay aluminium hinges aluminium handle 100 mm long alum tower bolt 100 mm long

M&L for PCC type C2, 1:3:6( using 40 mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth using extra cement, including forms, moulds , mitred/ stopped ends etc complete all as specified and directed.

Add or deduct for each 25mm girth or part there of over or under 30 cm ditto as per item No.4 above complete all as specified and directed.

Notes :

M/S SAJJAD HUSSAIN CONTRACTOR

hardeep singh enterprises

M/S Alam Construction Co

M/S Gupta and Company

SANJEEV ENTERPRISES

M/S SATISH KUMAR JAIN

Shikhar ji Enterprises