Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-AOC | ₹2.2 L | L1 | Accepted-AOC First lowest bid |
| 2 | L2₹2.5 L+₹34,525.43 (16.0%)Rejected-AOC VENUGEETHAM MRA T40 THACHANKARA LANE MARUTHANKUZHY TRIVANDRUM 695030 | THIRUVANANTHAPURAM | KERALA | 695030 | ₹2.5 L+₹34,525.43 (16.0%) | L2 | Rejected-AOC Second Lowest bid |
| Sl No | Description | Qty | Unit | MASTERCELL TELECOM SERVICES (P) LTD L2 | DEEPU RADHAKRISHNAN L1 |
|---|---|---|---|---|---|
| 1.00Civil Works | |||||
| 1.01 | 21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating
50 micron) | 61.17 | /kg | 540 ₹33,032.34 | 500 ₹30,585.5 Lowest |
| 1.02 | 21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre- laminated particle board with decorative lamination on
both sides | 6.31 | /sqm | 1,050 ₹6,622.35 | 1,000 ₹6,307 Lowest |
| 1.03 | 21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness (weight not less than 12.50 kg/sqm) | 5.26 | /sqm | 1,400 ₹7,364 Lowest | 1,500 ₹7,890 |
| 1.04 | 21.16.2
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS
screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum
thickness 50 micron aluminium | 2 | /no | 100 ₹200 Lowest | 100 ₹200 Lowest |
| 1.05 | 9.97.5
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not
less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade,
with necessary screws complete:100x10 mm | 2 | /no | 75 ₹150 Lowest | 75 ₹150 Lowest |
| 1.06 | 21.13
Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair
of handles ( best make of approved quality ) for aluminum doors including necessary
cutting and making good etc. complete | 1 | /each | 540 ₹540 | 500 ₹500 Lowest |
| 1.07 | 9.101.1
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to
required colour and shade, with necessary screws etc. complete.Single rubber stopper | 1 | /no | 45 ₹45 Lowest | 45 ₹45 Lowest |
| 1.08 | OD402202/2025-2026
Supplying and fixing brass wheel set of sliding door | 2 | /set | 660 ₹1,320 | 600 ₹1,200 Lowest |
| 1.09 | 15.57
Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false
ceiling including disposal of unserviceable material and stacking of serviceable
material with in 50 metres lead as directed by Engineer - in-Charge | 4.73 | /sqm | 60 ₹283.8 | 50 ₹236.5 Lowest |
Tender Value
₹2.6 L
EMD Value
₹6,562
Closing Date
23 Jul 2026, 4:00 pmClosed
Regional Engineer
REGIONAL ENGINEER Kerala State Nirmithi Kendra NHEC Barton hill Vanchiyoor P O Thiruvananthapuram Ph No9656360256
CIVIL WORKS
2026_KSNK_860681_1
KSNK/TECH/NHEC/FHM-406/2026
Open Tender
Civil Works - Buildings
Item Rate
60 days
Muttada TVM
REFER NIT
6 documents required · 6 mandatory
₹525
₹6,562
Yes
14 Sept 2026
15 Jul 2026
25 Jul 2026
15 Jul 2026
23 Jul 2026
15 Jul 2026
15 Jul 2026 - 23 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Civil Works | - | - | - | - |
| - | 21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating
50 micron) | 1 | /kg | - | - |
| - | 21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre- laminated particle board with decorative lamination on
both sides | - | /sqm | - | - |
| - | 21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness (weight not less than 12.50 kg/sqm) | 1 | /sqm | - | - |
| - | 21.16.2
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS
screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum
thickness 50 micron aluminium | - | /no | - | - |
| - | 9.97.5
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not
less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade,
with necessary screws complete:100x10 mm | - | /no | - | - |
| - | 21.13
Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair
of handles ( best make of approved quality ) for aluminum doors including necessary
cutting and making good etc. complete | - | /each | - | - |
| - | 9.101.1
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to
required colour and shade, with necessary screws etc. complete.Single rubber stopper | - | /no | - | - |
| - | OD402202/2025-2026
Supplying and fixing brass wheel set of sliding door | - | /set | - | - |
| - | 15.57
Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false
ceiling including disposal of unserviceable material and stacking of serviceable
material with in 50 metres lead as directed by Engineer - in-Charge | - | /sqm | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
agreementmuttada1.pdf
Tender Documents • 0.26 MB
tenderconditionmuttada1.pdf
Tender Documents • 0.73 MB
epay.pdf
Other Document • 0.01 MB
BOQ_1455476.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .