Non csr item rate for the construction of Administrative Building for water Resources Department at civil line Gondia for the preparing of estimates for Building work electrical work furniture work plumbling and sanitary work cctv system etc

Amount

CIVIL WORK BUILDING

Supply & Installation two/three track UPVC sliding Glazed window of FENESTA, REHAU, BAJAJ or equivalent make (TYPE - S3000 SLIDER), frame fabricated out of rigid UPVC hollow section of size 118mm x 58mm (S56-PF1) with concealed solid polymeric reinforcement shall have metre cut and fixed with the help of 100mm long full threaded metal screws in UPVC roll plugs inserted in wall as hold fast. Sliding shutter shall be fabricated out of rigid UPVC hollow section of size 45mm x 90mm (S65-PS1), and interlocking section of size 5mm x 33mm shall be fixed on vertical member of sliding shutter. The snap fit glazing beading of size 21mm x 18.5mm (A65-PB3) shall be fixed alongwith sliding shutter for fixing the 5mm thick toughened glass panel in pristine white profile, flush patio type handle in white color with necessary hardware such as polyester pile seal, rubber gasket, roller bearing and lock etc. shall be fixed at required junction. Drainage hole shall be made at the bottom of window frame etc. and remaking damaged surface, with all necessary fittings including unloading, stacking, lifting, scaffolding, etc. complete or as Directed by the Architect

Supply & Installation Automatic Sliding Glass Door of DORMA Make Automatic Sensor door ES200 EASY of length 4.15mtr consist of Mechnical Components, Electrical Components, Glass Clamping Rail - 1000 mm - 2 Nos, Floor Guide for Glass Door - 2 Nos, Radar MW 6 - 2 Nos, Light Barrier SBK 111 - 1 Pair, Five Position Program Switch, Cable For Program Switch EM Lock with Extension Cable, 12 mm clear Toughened Glass, Patch PT 90 for Fixed Glass 8 Nos with all necessary fittings etc. complete or as directed by the Architect (EXCLUDING GST)

Providing & laying wooden flooring in required position of Span 10.0 mm narrow planks with size of 1380 x 116 x 10 mm with top face of Al2O3 + soacked with melamine resins with back face melaminesoaked balancing layer along with HDF core board , EI norms along with locking strength of 800-900 kgs/linear mtr with AC 4/32 grade, IC 2, with certification of PEFC, FSC, EPLF, including loading, unloading,stacking, cutting, etc. complete with all necessary fittings etc. complete or as directed by the Architect

Providing & laying wooden skirting in required position with ready made adesive including loading, unloading, stacking, cutting, Reducer, T-Profile, Bedding etc. complete with all necessary fittings etc. complete or as directed by the Architect

Supply & instalation 46MM thk factory made decorative type Single leaf Embosed wood door OF MAKE TATA PRAVESH DOOR made up of 0.8mm to 1.2mm thick slip coated pre-galvanized steel sheet to ASTMA527 /ASTMA525, JISG3302 or BS29891994, IS277. Zinc coating 80-120gsm. Lock formed panels with internal stiffeners of 3mm thick made of GP. Galvanised steel with wooden powdercoating and honeycomb infill.Shutter thickness : 0.8 mmFrame thickness : 1.2 mmFrame profile : 100x58 mmLeaf thickness : 46 mm With all necessory S S Ball bearing Hinges, Mortice lockwith handle of Dorset make along withDoor stopper, Eyehole, Door closer andtower bolt. including all necessory fittings, loading unloading stacking & transportation etc complete. or as directed by the project consultant

Providing and fixing in position of heavy duty pre-polished Pavit eco shell (plain) tile or equivalent make of size 300mm x 300mm x 10 mm for Terrace confirming to IS 4457 ( 4B to 4G ) and EN. 176 or as directed by engineer-in-charge. The pattern and colour will be as per drawing or as directed by the Project Architect. Laying on a bed of cement mortar (1: 4 ) 20mm to 40 mm thick required neat cement jointing , curing, and cleaning complete. The item include all taxes, transportation, loading- unloading, stacking, clearing etc. compete. Prior sample and specification of Pavit Tile to be approved by engineer-in-charge/project consultant.

Providing and fixing in position of heavy duty pre-polished Pavit grano Erthen Parking tiles or equivalent make of size 600mm x 600 mm x 10 mm confirming to IS 4457 ( 4B to 4G ) and EN. 176 or as directed by engineer-in-charge. The pattern and colour will be as per drawing or as directed by the Project Architect. Laying on a bed of cement mortar (1: 4) 20mm to 40 mm thick required neat cement jointing , curing, and cleaning complete. The item include all taxes, transportation, loading- unloading, stacking, clearing etc. compete. Prior sample and specification of Pavit Tile to be approved by engineer-in-charge/project consultant.

1 Supply and Installation of polycarbonate multilayered / multicell standing seam system, a complete assembly of extruded multilayer / multicell UV protected polycarbonate panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 14 mm thick panel of 600 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with opaque and translucent clear combination as per required lux level including all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical offset standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 2.5 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labor with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Color: As per Approval. Approved Make: DPI Daylighting or approved Equivalent Sqm

MAKING CORE BY DIAMOND HEADED CORE CUTTING MACHINE OF 75 MM, 100MM DIA and 150MM DIA UPTO VARIOUS DEPTHS INCLUDING ALL REQUIRED STAGING, ANCHORAGE & MACHINE MOUNTINGS, SCAFOLDINGS, ETC. COMPLETE. OR AS DIRECTED BY THE PROJECT CONSULTANT.

100mm dia-230mm to 750mm depth

100mm dia-230mm to 750mm depth

150mm dia-230mm to 750mm

PROVIDING AND FIXING VARIOUS DIA OF TMT BARS BY DRILLING HOLES OF SPECIFIED SIZE UPTO THE DEPTH IN RCC COLUMN/ BEAM/ SLAB AS DIRECTED BY ENGINEER IN -CHARGE, GROUTING BY BOUNDING CHEMICAL FOR ANCORAGE, SCAFOLDING, CLEANING, ETC. COMPLETE. OR AS DIRECTED BY THE PROJECT CONSULTANT(EXCLUDING TMT BAR) Rebaring

10 MM DIA BAR

12 MM DIA BAR

16 MM DIA BAR

20 MM DIA BAR

25 MM DIA BAR

32 MM DIA BAR

Providing and fixing First class red hollow brick work of size 225*105*75 bricks of Paul Bricks make, fixed in adhesive MYKL LATICRETE or equivalent or as approved by the consultant, Conforms to ANSI A118.1 & ANSI A 118.4-1999 fixoblock (chemical adhesive) wall including striking joints, raking out joints,and scaffolding etc.Complete

Providing and fixing First class red hollow brick Work of Size 225X105X75 bricks of Paul Bricks make, fixed in adhesive MYKL LATICRETE or equivalent or as approved by the consultant, fixoblock Conforms to ANSI A118.1 & ANSI A 118.4-1999 jointing 3mm thickness (chemical adhesive) wall including two hoop ironstrips 25mmx1.60mm at every third course, properly bent and bounded at ends scaffolding raking out joints an de watering etc.complete.

Providing and fixing First class red hollow brick work of size 225*105*75 bricks of Paul Bricks make, fixed in adhesive MYKL LATICRETE or equivalent or as approved by the consultant, Conforms to ANSI A118.1 & ANSI A 118.4-1999 fixoblock (chemical adhesive) wall including striking joints, raking out joints,and scaffolding etc.Complete

1) PLUMBING & SANITARY WORKS

Providing And Fixing In Position White Vitreous China Extended Wall Hung Water Closet of JAQUAR MAKE OR equivalent make (wc Western Type) With "P" Or "S" Trap Supporting On Wall Hangers With Bolts & Nuts, Etc. With All Internal Fittings Complete On Supporting Brackets, PP Soft Closing Toilet Seat Cover With C.p. Brass Hinges With Rubber Buffers And With single piece slim concealed Cistern OF capasity with floor mounting frame, installation kit & 'S-TYPE' drain pipe connection set for wall hung wc with flush control plate, hand shower (HEALTH FAUCET) withj 1.00M easy flex tube chrome finish with wall hook & flow ristrictor of 6.0LPM at 3bar pressure Etc. Complete. ( Prior Approval Of Sample And Brand Byengineer Is Necessary Before Use) Spec.no.: As Directed By Engineer-in-charge. (as Per Jaquar Catalogue or equivalent make Reference Code; wall Hung Wc With seat Cover :- CNS-WHT-961S + Single piece slim conceled cistern :- JCS-WHT-2400FSG+ Control Plate :- JCP-CHR-852415 ALIVE (K5139) Hand Shower (HELTH FAUCET) :- ALD-CHR-565GA

Providing And Fixing In Position Urinals With All Internal Fittings Complete On Supporting Masonary And With sensotronic concealed type flushing valve for urinal complete set with installation box with control [late cock & flow restrictor 1.4 lpf at 3 bar pressure etc completed. (prior Approval Of Sample And Brand By Ex.engineer Is Necessary Before Use.) (as Per Jaquar Catalogue or equivalent make Urinal with fixing accessories set :- URS-WHT-132530 Sensotronic concealed type flushing valve :- SNR-STL-51087G

Providing and fixing in position urinals with all internal fittings complete on supporting masonary and with flushing valve (pressmatic type). (prior approval of sample and brand by ex.engineer is necessary before use.) (as per jaquar catalogue reference code : URS-WHT-132530 + PRS-077-G)

Providing and fixing in position white vitreous china table top wash basin of size 480 X 480 X 130mm with supporting brackets including providing and fixing 15mm dia. c.p. brass pillar cock(with sensor), c.p. brass bottle trap, c.p. brass waste coupling, wall flanges, etc. complete. (prior approval of sample and brand by ex. engineer is necessary before use)(as per jaquar catalogue reference code; wash basin :- OPS-WHT-15901N + Basin Spout With Flow Ristrictor 1.4 Lpf At 3bar Pressure :- OPP-CHR-15441KPMGA + waste coupling :- ALD-CHR-709 + bottle trap :- ALD-CHR-769L300 X190)

Providing and fixing in position C. P. Brass Angle Cock with all necessary fittings. etc. complete. ( near the wash basin, etc. as directed by the architect) (as per jaquar catalogue reference code : FLR-5053N)

Providing & fixing 1800 x 550 x 6mm thk Mirror (Saint Gobain/ Modi Make) with all necessary fittings, stud fittings, silicon, etc. complete. ( near the wash basin, etc. as Directed by the Architect)

Providing and fixing in position Soap Dispenser ( with glass bottle) ( near the wash basin all necessary fittings. etc. complete. as Directed by the Architect) (as per Jaquar Catalogue reference code: ACN-1135N)

Providing and fixing in position Toilet Roll Holder with all necessary fittings. etc. complete ( near the W.C. as Directed by the Architect) (as per Jaquar Catalogue reference code : ACN-1151N)

Providing and fixing in position Towel Ring Square with round flange with all necessary fittings. etc. complete ( near the wash basin as Directed by the Architect) (as per Jaquar Catalogue reference code : ACN-1121N)

Providing and fixing in position Stainless Steel Handicap Grab Bar 450mm with all necessary fittings, etc complete. ( in W.C area as directed by the architect) (Jaquar Make- CODE : AHS-1503)

Providing And Fixing In Position Double Coat Hook With All Necessary Fittings. Etc. Complete. ( Near The Wc As Directed By The Architect) (as Per Jaquar Catalogue Reference Code : Akp-35761p)

Providing and fixing 50 MM Dia. NRV( Non Return Valve ) 50 mm Dia including sockets & necessary fittings & tested as per muncipal requirements etc. complete.As directed by the Project consultant

Providing and fixing 50mm dia Float valve Valves required for Over head water tank, with all necessary fittings & tested as per muncipal requirements etc. complete.As directed by the Project consultant(As per CICO make or equivalent make )

Providing and fixing 40 mm Dia Ball valve for submersible pump of specified dia Valves required for Raw/ STP water sump, over head water tank & for tanker decanting with all necessary fittings & tested as per muncipal requirements etc. complete.As directed by the Project consultant.

Providing and fixing 50 mm Dia Ball valve for submersible pump of specified dia Valves required for Raw/ STP water sump, over head water tank & for tanker decanting with all necessary fittings & tested as per muncipal requirements etc. complete.As directed by the Project consultant.

Providing and fixing 50 mm dia Over flow valves or over head water tank with all necessary fittings & tested as per muncipal requirements etc. complete.As directed by the Project consultant.

Providing and fixing 50mm dia Butterfly valve for raw / STP water pumps of with all necessary fittings & tested as per muncipal requirements etc. complete.As directed by the Project consultant.

Providing and fixing Plug Tees for Over Head Water tank 50mm including all fixtures & fittings etc complete. PVC - (SCH-40)As directed by the Project consultant

Providing and fixing Grease trap with cover (ROTO) 450 litres on P.C.C. foundation, including brick masonary chamber with all necessary fittings etc complete.SPEC. NO.: AS DIRECTED BY ENGINEER-IN-CHARGE.

Providing and fixing in position Hand Dryer Optima with all necessary fittings etc. complete. (prior approval of sample and brand by ex. engineer is necessary before use) (as per jaquar catalogue reference code; Hand Dryer Optima :-M99ACS)

Providing and fixing in position Bib Cock (Straight Line Model) with wall flange for wash area of Kitchen with all necessary fittings etc. complete. (prior approval of sample and brand by ex. engineer is necessary before use) (as per jaquar catalogue reference code; Bib Cock (Straight Line Model) with wall flange:- FLR-5047N-G/GA)

Providing & fixing C.I. Manhole covers with frames / rings for R.C.C., underground water storage tanks/Over Head tank, sizes of covers with all necessary fittings etc. complete. (600mm dia.) NOTE:-should be provided with locking arrangement Excluding GST.

Providing & fixing 50 mm (1 1/2") dia PVC 10 kg class pipe of Approved make complete with PVC fittings with solvent cement joint such as bend, tee, coupling, elbow, Reducers etc. for urinal & W/B waste with all necessary fittings etc. complete. Excluding GST.

Providing & fixing 40 mm (1 1/4") dia PVC 10 kg class pipe of Approved make complete with PVC fittings with solvent cement joint such as bend, tee, coupling, elbow, Reducers etc. for urinal & W/B waste with all necessary fittings etc. complete. Excluding GST.

Providing & fixing 50 mm (1 1/2") dia Pressure reducing Valve of Diaphram type of Tata Honeywell /Varie make with necessary connectors with all necessary fittings etc. complete. Excluding GST.

RAIN WATER HARWESTING

Providing and constructing Recharging Pits with borewells with 20mm thk. internal & external Plastering includes inlet & overflow outlet Upvc Agri pipe or Eco drain, Gravel, Brick bats, Charcol, Sand are filld equal depths as per harvesting consultant drawings & specification etc., complete. including with laying and boring of 150mm dia. with Perforated PVC pipes filled with 40 mm metal/pebbles upto the level of aquafier, as directed including with necessary excavation, refilling etc. complete .Excluding GST.

Providing and constructing recharge ring well of 1.2m dia and depth upto 6m made of RCC pipe collar including excavation and stacking the soil and disposing as per the instructions of engineer-in-charge, pumping of water, lowering the collars by means of lifting tackles and filling with gravels and boulders from outside of the circumference of the collar so as to allow infiltration of ground water inside the well through the gap between the collars. complete as per drawing .Excluding GST.

Providing and constructing Sediment chamber size of 2 m X 0.9x 2 mt. Depth including excavation of all type soil with 230mm thick rubble soling at chamber bottom and 100 mm thick PCC. Chamber shall be complate 350 mm brick wall thick.and arrange two brick bafle wall of 230mm thick with ss sloted jali for filtration purpose.Providing 600 x 900 mm 3 nos RCC heavy duty cover with frame at chamber top with arrange 150mm dia PVC pipe for over flow and connection to rechage pit. complete with as per drawing detail.Excluding GST.

FURNITURE

TABLE WITH VENEER AND GLASS TOP

Providing & fixing in position tables made of 19/12/6 mm - greenply /centuryply make (or as approved by consultant) ply at top, side and front, support along with drawer unit & key board tray with telescopic arrangement & foot rest of teak wood member of 75 x 40 mm.Table top shall be in Veener of green/ century/ merino or as approved by consultant with 6mm glass on the top. All external surfaces to be finished with 1mm thick suede/ texture finish veneer of greenply/centuryply/ merino or as approved by consultant and internal surface finished with 0.8mm thick of approved shade and make, including fittings like sliding channels for key boards & drawers, medium duty hinges for shutter, cable manager, S.S handles in approved design and size and lock wherever directed in Hafele/ Hettich/ Ebco make. All exposed plywood edges to be finished with 6mm thick Teak wood beading with french polish in approved shade or edge binding of same colour and necessary locks to shutters etc. complete in all respects.

SIZE - 8'-0" x 3'-6" x 2'-6"

SIZE- 6'-0" x 3'-0"x 2'-6"

SIZE - 6'0" x 2'6" x 2'-6"

TABLE WITH LAMINATE TOP

Providing & fixing in position tables made of 19/12/6 mm - green/century make (or as approved by consultant) ply at top, side and front, support along with drawer unit & key board tray with telescopic arrangement & foot rest of teak wood member of 75 x 40 mm. All external surfaces to be finished with 1mm thick suede/ texture finish laminate of green /century/ merino or as approved by consultant and internal surface finished with 0.8mm thick of approved shade and make, including fittings like sliding channels for key boards & drawers, medium duty hinges for shutter, cable manager, S.S handles in approved design and size and lock wherever directed in Hafele/ Hettich/ Ebco make. All exposed plywood edges to be finished with 6mm thick Teak wood beading with french polish in approved shade or edge binding of same colour and necessary locks to shutters etc. complete in all respects.

SIZE - 6"-0" x 2'-6" x 2'-6"

SIZE - 5'-0" x 2'-6"x 2'-6"

SIZE - 4'-0" x 2'-0" x 2'-6"

CONFERENCE TABLE

Providing & fixing in position conference table made of 19/12/6 mm - greenply/centuryply make (or as approved by consultant) ply at top,side and front. All external surfaces to be finished with 1mm thick suede/ texture finish laminate of green /century/ merino or as approved by consultant and internal surface finished with 0.8mm thick of approved shade and make includind fittings like cable manager, etc . All exposed plywood edges to be finished with 6mm thick Teak wood beading with french polish in approved shade or edge binding of same colour. complete in all respects.

SIZE- 5'-0" x 15'-0" x 2'-6"

SIZE- 5'-0" x 20'-0" x 2'-6"

SIDE TABLE

Providing & making Side table of size 3'-0" x 1'-4" x (2'-4" to 2'-6") in 18mm/12mm/6mm thk. green/ century make ply or as approved by consultant for all structure work, shelves, shutter, drawer, etc.with 1mm thk. Laminate finish on exposed side and 0.8mm thk laminate on internal side with requird hardware. Hafele/ Hettich/Ebco make Telescopic channels to be provided. All the drawers & shutters will have locking arrangement with SS brush finished handles of 6" ht etc. complete.Table top will be in 1mm thick Laminate as approved.

CREDENZA / STORAGE

A).CREDENZA WITH LAMINATE

Providing & making Credenza of Height 2'-6" to 2'-10" in 18mm/12mm/6mm thk. green/ century make ply or as approved by consultant for all structure work, shelves, shutter, drawer, etc.with 1mm thk. Laminate finish on exposed side and 0.8mm thk laminate on internal side with requird hardware.Hafele/ Hettich/Ebco make Telescopic channels to be provided. All the drawers & shutters will have locking arrangement with SS brush finished handles of 6" ht etc. complete.Table top will be in 1mm thick Laminate as approved.

B).CREDENZA WITH VENEER

Providing & making Credenza of Height 2'-6" to 2'-10" in 18mm/12mm/6mm thk. green / century make ply or as approved by consultant for all structure work, shelves, shutter, drawer, etc.with 1mm thk. Veneer finish on exposed side and 0.8mm thk Veener on internal side with requird hardware.Hafele/ Hettich/Ebco make Telescopic channels to be provided. All the drawers & shutters will have locking arrangement with SS brush finished handles of 6" ht etc. complete.Table top will be in 1mm thick Laminate as approved.

C).FULL HEIGHT STORAGE

Providing & fixing in position 400mm deep full height storage made of 19mm MR grade ply at top, front and side with12mm MR grade ply at back, all external faces including back to be finished with 1mm thick multi-coloured laminate at outide and inside finished with 0.8mm laminate with locking and SS handle arrangenment of approved make complete with openable type shutter, beading patti, etc. all exposed plywood edges to be finished with 6mm thk teak wood beading with french polish in approvedshade complete.

Center Table :- Providing & fixing in position free standing table made of 19/12/6 mm - greenply/centuryply make (or as approved by consultant) ply at top,side and front..Table top shall be in laminate Veener of green/ century/ merino or as approved by consultant with 6mm glass on the top. All external surfaces to be finished with 1mm thick suede/ texture finish laminate of green /century/ merino or as approved by consultant and internal surface finished with 0.8mm thick of approved shade and make includind fittings like cable manager, etc . All exposed plywood edges to be finished with 6mm thick Teak wood beading with french polish in approved shade or edge binding of same colour. complete in all respects. It shall have a continuous footrest at the bottom. Design shall be as per Drawing.

. Size : 4'-0"x2'-0"x1'6".

Size : 2'-0" x 2'0".

a).Sofa made out of wood frame with cushions complete. Size 6'-0" long. (Three Seater)

b).Sofa chair made out of wood frame with cushions complete. Size 2'-3" long. (One Seater)

PANELLING - GREEN/CENTURY/EURO MAKE

Providing & fixing wall panelling /coloumn cladding in 12mm thk waterproof plywood of Green/Century/Euro make with framing s required using necessary screws/fevicol/joining pins etc. All exposed faces of ply to be pasted with textured/plain Veneer of Suede finish with fevicol as per drawing including 3/4"-1.5" beeding as per drawing on exposed faces with mellamine polish on it. The item is complete with all required material & labour.

PARTITION WITH DOOR

Providing & fixing 65mm thick Full height Dead partition with 6mm thick commercial ply to either side of frame of 50 mm x 50 mm x 1mm Aluminium sections at 610 mm c/c in both direction with 1 mm thick laminate of approved shade and make on both side, including 33 x 25 mm size T.W. door frame to stop fully glazed door shutter out of 35mm thk. Solid core BWP Flush door panel duly cut forming 150mm rails & styles with 1mm thk. Laminate of approved make & shade as per drawing with T.W. beading, 300mm Brush finish S.S. handles, Mortised lock, door closer, door stopper and three coats of French polish of approved shade to all exposed T.W. members (Al. sections shall carry upto slab with required grouting in wall/slab soffit. Measurement up to ceiling only will be paid.)

FREE STANDING TABLE (TRAINING ROOM)

Providing & fixing in position free standing table made of 19/12/6 mm - greenply/centuryply make (or as approved by consultant) ply at top,side and front. All external surfaces to be finished with 1mm thick suede/ texture finish laminate of green /century/ merino or as approved by consultant and internal surface finished with 0.8mm thick of approved shade and make includind fittings like cable manager, etc . All exposed plywood edges to be finished with 6mm thick Teak wood beading with french polish in approved shade or edge binding of same colour. complete in all respects. It shall have a continuous footrest at the bottom. Design shall be as per Drawing.

SIZE- 6'-0" x 2'-6" x 2'-6"

PODIUM (TRAINING ROOM)

Providing & fixing in position free standing podium with department logo made of 19/12/6 mm - greenply/centuryply make (or as approved by consultant) ply at top,side and front. All external surfaces to be finished with 1mm thick suede/ texture finish laminate of green /century/ merino or as approved by consultant and internal surface finished with 0.8mm thick of approved shade and make including fittings like cable manager, etc. All exposed plywood edges to be finished with 6mm thick Teak wood beading with french polish in approved shade or edge binding of same colour. complete in all respects. Design shall be as per Drawing.

SIZE- 4'-0" x 2'-0" x 1'-0"

CHAIRS

A).Ergonomically designed Luxury Chair for SE with cushion high back & cushion seat and hydraulic mechanism with revolving & tilting.

B).Ergonoically designed Executive office Chairs with back & cushion seat and hydraulic mechanism with revolving & tilting.

C).Chairs for visitors in SE Chamber with cushion seat & cushion back.

D).Contact Poject high mesh back chair with co-active synchro gaslift and multi locking adjustable arms of Featherlite/ Godrej/ Wipro

E).Contact Poject medium mesh back chair with co-active synchro gaslift and adjustable arms of Featherlite/ Godrej/ Wipro

F).For visitors Smart chair mesh back with revolving cushion seat nylon base, gaslift of Featherlite/ Godrej/ Wipro

G).Bodyline Visitors chair with arms and writing Desk- of Featherlite/ Godrej/ Wipro

H).Orbit Tandem three seater with arms- shiny finish of Featherlite/ Godrej/ Wipro

I).Orbit Tandem two seater with arms- shiny finish of Featherlite/ Godrej/ Wipro

BLINDS

A).ROLLER BLINDS (BLACKOUT WITH COVER )

B).ROLLER BLINDS (SUNSCREEN WITH COVER )

WALLPAPER

WALL PAINTINGS(PHOTO FRAMES)

SIZE. 2'-0"x 4'-0"

SIZE2'-0"x3'-0"

SIZE1.5'-0"x3'-0"

AUDIO SYSTEMS (Projectors,Screens,Microphone etc.)

A).Sennheiser/Behringer/ Bosch/Equivalent make EW 100 G4-835-S Wireless Handheld Microphone System

B).Sennheiser/Behringer/ Bosch/Equivalent make EW 100 G4-ME4 Wireless Lavalier Microphone System

C).Apart Audio CM30DTD 4.25" two-way, thin edge ceiling loudspeaker, with back can

D).Apart Audio REVAMP2120T, 2-channel 100V bridgeable digital power amplifier, 2 x 120W

E).Yamaha/Behringer/Philips/Equivalent make MG10XU 10-Input Stereo Mixer

F).92" HD Motorised Screen

G).BenQ/Behringer/Epson/NEC/ Equivalent make MH740 1080p DLP 3D Projector

H).15 Mtr Goobay HDMI Cable

I).Liberty Ceiling Mount

Supply, installation, testing & commissioning of diesel engine driven Fire pump (stand by) LPM 1620, Head: 70mtr , RPM 2150, Pump casing CI Impeller, Bronze and gland packing common base plate anti vibration pad with coupling guard, fuel tank, battery, battery charger, fuel gauge, coolant, engine oil, terminal clips, fuel pipe, return pipe etc. Make : Kirloskar, Wilo, Lubi, C&R

Supplying and erecting ISI mark G.I. pipe 32 mm. dia ‘C” class at position with accessories as per specification.

Supplying and erecting ISI mark G.I. pipe 40 mm. dia ‘C” class at position with accessories as per specification.

Supply, installation, testing and commissioning of 150 mm dia Installation Alarm Valve with Water Motor Gong, Pressure Gauges, Test Lines with Ball Valves with necessary GI (H) piping with threaded fittings of required sizes complete.

Providing and fixing UL/Fm listed SS braided flexible pipe upto 1200mm long with accessories complete with all accessories specified in technical specifications (Size=15B)

ELECTRICAL PANEL FOR PUMP: Supply, Installating, Testing & Commissioning of Fire Hydrant System Fire Pump Logic Control Panel. (For Main Electrical pump, Jockey pump and diesel engine pump)

Supplying and erecting Fire Exit Signages of photolumicient type with standard accessories complete

Supplying , Installation , Testing And Commissioning of Hinged Metal fire door 1200 x 2100 mm 120 min fire rated un insulated single 50mm THK Honey Comb Infill single double RBT 143 x 57mm frame Straight with anchor fast erness frame 1.0 & shutter 0.9 mm powder coated to ral shade SFP SS Ball bearing 4" x 3" x 3"mm hionghed for steel doors ingersoll rand briton 121, NCE. SES Door closer size 3 with standard ARM , sprayed silver finish SFP SS sashlock with 70mm back set and 24 mm for end , SS lever handle 22x 125 mm on rose , Euro pROFILE CYLINDER 70 mm with both side key. 29 SS strike plate Escutchenos schott pyran fire rated clear Glass 6mm thick 240 x 340 33 Hinged Metal Fire Door 1200 x 2100 mm, 120 min fire Rated.

AIRCONDITIONING EQUIPMENT

A).Interconnecting Power & control cabling between Indoor Unit & Outdoor unit Approved Make: Finolex, Asian/RPG, KEI, Havells,

B).supply & installation of metallic support frame for installation of Outdoor condensing unit.

AIR COOLING WORK

A)Supply of Machine

Evaporative Air Cooler unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized/ pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section and blower motor suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, belt drive package, wet section & tank. The Evaporative Air Cooler unit shall be complete with water circulation pump, interconnecting piping & valves. The Evaporative Air Cooler unit with 50mm static & compatiable to VFD.

Approved Make: Metatech / Seeley international / Coolerrado

ii).18000 CFM

iii).21000 CFM

iv).31000 CFM

B).GI Ducting

Supply and installation of GI, Pre fabricated (factory made) rectangular ducts as per specification and in accordance with the approved shop drawing and specifications.

Approved Make: Metatech / Rolastar

i).24 Swg, Glavanised Iron Sheet thickness 0.63 mm

ii).22 Swg, Glavanised Iron Sheet thickness 0.8 mm

iii).20 Swg, Glavanised Iron Sheet thickness 0.1 mm

iv).18 Swg, Glavanised Iron Sheet thickness 0.12 mm

MS Fabrication work for the support of Factory fabricated galvanised sheet metal ducts by gasket, slotted channels, Gripples or MS Supports, threaded rods, anchor fastner, washers, cable tie & other required accessories

Air Terminal Device

Approved Make: Cosmos / Caryaire / Ravistar / Trox / Air Product / Air Master

i).Supply,installation,testing and balancing of powder coated extruded Aluminium Supply air Grills (Double deflection grill).

ii).Supply,installation,testing and balancing of powder coated extruded Aluminium Opposed Blade Damper to control of volume of air flow and for proper balancing of the air distribution system .

iii).Supply,installation and testing of G.I.construction volume control dampers complete with lever and quadrant for manual control of volume of air flow and for proper balancing of the air distribution system

Insulation

i)Supply, installation & testing of Thermal Insulation 20 mm nitrile rubber.

ii)Supply and Installation of 50 mm Thick Thermacol insulation for Out Side Ducting.

iii)Supply, installation, testing and commissioning of Internal accoustic insulation using food grade adhesive with open cell structured Class "O" nitrile rubber of 15 mm thickness with density 150 kg/m3 from inside the Duct

Miscellaneous Work

i).Flexible Connection for Mouth opening of Air Cooler to S.A. Duct

EXHAUST VENTILATION SYSTEM:

1).Inline Cabinet Fans:

Supplying, installing, testing and commissioning of VFD controlled Inline Cabinet fans for exhaust and ventilation system including necessary cabling, control wiring as required, VFD connection.Approved Make: Kruger, Airflow, Humidin, Systemair, LAU

2).Propeller Fan

Supply, installation, testing & commisioning of Propeller fan for toilet exhaust system as follows:Approved Make: Kruger, Airflow, Humidin, Systemair, LAU

3).Ducting

Supply and installation of GI, Pre fabricated (factory made) rectangular ducts as per specification and in accordance with the approved shop drawing and specifications.Approved Make: Metatech / Rolastar

i).24 SWG, Glavanised Iron Sheet thickness 0.6 mm

ii)22 SWG, Glavanised Iron Sheet thickness 0.8 mm

iii).20 SWG, Glavanised Iron Sheet thickness 1.0 mm

4).Supply, fabrication and installation of MS Fabrication work of MS angle iron of suitable size for stands of FAN complete with painting, vibration isolation pads, supports, rangers, railing, brackets etc with coats of primer etc. as required.

5).MS Fabrication work for the support of Factory fabricated galvanised sheet metal ducts by gasket, slotted channels, Gripples or MS Supports, threaded rods, anchor fastner, washers, cable tie & other required accessories

6).Air Terminal Device

i).Supply, installation, testing and balancing of powder coated extruded Aluminium Disk Valve .

ii).Supply, installation of Bird screen & cowl piece for Inline Exhaust Air Fan.

7)Flexible Connection for Mouth opening of Exhaust air fans

8)Supply, laying testing and commissioning of Copper Conductor Wire on existing cable tray / surface including clamps, ties etc. as required.Approved Make: Finolex, Asian/RPG, KEI, Havells,

i)2C x 1.5 sq. mm copper conductor wires

ii)4C x 1.5 sq. mm copper conductor wires

INTERNAL ELECTRIFICATION

Supply & erection, of decorative angular upward,downward focus waterproof spike light of 7-10Wwith required all accesosries eg. Stand, cover , brackers etc

Supply & erection of Early Streamer Emission type lighting Protection (Lightning Arrestor complete with The new OPR (Optimized Pulse Rod) range with increased initiation advance performances, represents further progress in terms of protection, operating autonomy and ease of maintenance. The radious of protection of OPR is not less than 60 meter. included with GI strips having size of 25 x 5 mm, & two no's earthing with earthing strip connection junction point, supporting arrangement (e.g. Rope, gey set) to erect the rod at top of building, on provide foundations as per direction of electrical incharge/ electrical consultant, etc. (Equivelent to OPR 60 ABB or SGI-Taran make Level-1) (As per Electrical Incharge or Electrical Consultant)

PANEL

supplying erecting testing and commising of earth leachage relay (ELR) with common bus current transformer having the following rating voltage rating 90-270 vac, overload 110% for 3 sec as per BS6253, Operating Delay = 0(40msec.),0.06,0.15,0.25,0.5,0.8,1,2,3(User adjustable) Setting of trp point = 0.030,0.10,0.30,0.50,1.0,3.0,5.0,10.0,20.0,30.0(User adjustable) CBCT size 35mm,70mm,120mm & 210mm Repeatability of set point = Better than 0.5%, Alarm relay output = 50% of range. Single NO/NC (contact rating 5A) Trip relay output = 80%-90% of range. Single NO/NC (contact rating 5A), Res = Manual

DATA AND LAN SYSTEM

Supply erection testing and commissioning od data projector complete with color light lamp video modes , data modes, arrangement including fitting with proper MS rod , connection pads composite (RCA) VGA in Dsuv 15 pin HDMI arrangement digital operation connecting computer & video equipment , digital zoom digital keystone, standard zoom lens, focus manually, complete with all required accessories , up operational of the projector, bidder has to ensured installation of projector such that distance adjustment of projection for the required application. Equivalent to VPL-DX 140/ DX-120 SONY make including remote control panel arrangement.

Supply, Installation, testing & commissioning of projector screen 1200mm X 900mm with connection, testing and comissioning. (As directioned by Engineer Incharge/ Elect. Consultant)

Gigabit Smart+ Switch with Fibre Uplinks, 24 Ports 10/100/1000 Mbps+ 4 SFP

CCTV SYSTEM

Supply & Installation of CCTV Camera (Night Vision camera super contact, great night vision during ''0'' Light, coverage minimum 25 to 30 mtr for outdoor & weather proof application) approved make duly erected on provided 3.5 mtr pole with connection, testing & commissioning complete. (As directed by Engineer In charge/ Elect. Consultant)

Supply & Installation of 32’’ LCD/Monitor (Samsung, Dell, Asus, Benq, Lenovo) with connection, testing and commissioning (As directed by Engineer In charge/ Elect. Consultant)

Supply & Installation of NVR, 32-channel (can file 4HDD) for monitoring, recording, playback with connection, testing and commissioning in security cabin. (As directed by Engineer In charge/ Elect. Consultant)

Supply & Installation of HDD-4TB capacity with connection, testing and commissioning in security cabin. (As directed by Engineer In charge/ Elect. Consultant)