Construction of Residential Building Bironkhal Type 4 01 No

Amount

Earth work in excavation by mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m in width or 1 including dressing of sides and ramming of bottoms, lift upto 1.5 out the excavated soil and disposal of surplus excavated

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

R.R. stone masonry laid in 1:6 cement & fine sand morter in foundation & plinth i/c all complete

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 2

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shutterin

Reinforced cement concrete work in beams,suspendedfloors,balconies,shelves,chajja,lintles,band,staircases etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centring and shuttering including strutting,ropping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Centring and shuttering including strutting,ropping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including strutting,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including strutting,ropping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.

Reinforcement for R.C.C.work including straightening,cutting,bending in positionand binding all comp. using Thermo-Mechanically Treated Bars.

Providing and fixing pressed steel door frames confirming to IS: 43 from commercial mild steel sheet of 1.25 mm thickness including h jamb, bead and if required angle threshold of mild steel angle of se or base ties of 1.25mm pressed mild steel welded or rigidly fixed t mechanical means, adjustable lugs with split end tail to each jamb butt hinges 2.5mm thick with mortar guards, lock strike-plate and as specified and applying a coat of approved steel primer after pre surface as directed by Engineer-in-charge

Providing and fiixing M.S.grills of required pattern in frames of window in M.S.flates,square or round bars etc.,all complet.

Renewing glass panes, with putty and nails wherever necessary Float glass panes of thickness 4 mm

Providing and fixing fly proof galvanised M.S.wire guage to windows and celestory with average width of a in both directions with dia.0.63 mm.

12 mm cement plaster of mix. 1:6 cement and fine sand mortar.

Providing and laying vitrified tiles sizes 600x600 mm laid on over 12 mm thick 1:2 cement:sand mortarin dado,skirting,risers,steps i/e all compl.work.

Providing and laying vitrified tiles sizes 600x600 mm laid on over 20 mm thick 1:4 cement:sand mortaron floor i/e all compl.work.

Providing and fixing Ist quality ceramic glazed floor tiles 300x300 mm conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick.

12 mm cement plaster finished with a floating coat of neat cement of mix1:4 cement:sand mortar i/e all complet.

Providing and fixing 35 mm th. ISI marked flush door shutters including stailness butt hinges with necessary screw conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

Providing and fixing ISI marked Aluminium sliding door bolts with nuts and screws etc. 300 x 16 mm

Providing and fixing ISI marked Aluminium. handles conforming to IS:4992 with necessary screws etc. 125 mm

Providing and fixing ISI marked Aluminium tower bolt black finish, (Barrel type) with necessary screws etc.250 x 10 mm

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and

Brick edging 7cm wide 11.4cm. deep to plinth protection with bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)

Finishing walls with water proofing cement paint of required shade

White washing with lime to give an even shade: New work (three or more coats)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats)over and including waterthinable priming coatwith cement primer.

Providing and applyingwhite cement based putty of average thickness 1mm of approved brand and manufactureover the plastered wall surface to prepare the surface even and smooth complete.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Providing and fixing 15 mm dia. nominal bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. internal work - Exposed on wall

Providing and fixing 20 mm dia. nominal bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Externall work - Exposed on wall

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm dia

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm White Vitreous china Orissa pattern W.C. pan of size 580x440mm foot rests.

Providing and fixing water closet (European type pan ) with 100mm White Vitreous china Orissa pattern W.C. pan of size 580x440mm foot rests.

One urinal basin with 5 litre white P.V.C. automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 White Vitreous China Wash basin size 550x400 mm with a pair of 1 pillar taps.

Providing and fixing Stainless steel A Isi 304(18/8) kitchen sink as per IS 13983 with CI brackets and stailess stel plug 40mm,including paintings of fittings and brackets i/e all comp.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C 32mm dia

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore.

Providing and fixing brass stop cock of approved quality. 15 mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene w tank ISI : 12701 marked with cover and suitable locking arrangem

P/F75mm plain bend

Providing and fixing gun metal gate valve with C.I. wheel of appro (screwed end)25 mm nominal bore

Constructing masonry Chamber 90x80x45 cm, inside with 75 class brick work in cement mortar 1:4(1 cement : 4 coarse sand) for wafloating coat of neat cement complete as per standard design :With F.P.S. bricks

Providing and fixing ball valve (Brass)of approved quality complete High or Low pressure with plastic floats as direction of Engineer in charge.

Excavation in foundation for retaining & breast walls in all types of soils and rocks including lead, lift and disposal of surplus material as per direction of engineer - in - charge

Providing and laying in position cement concret of specified grade 1:4:8(1 cement:4 Coarse sand :8 graded stone aggregate 40 mm nominal size.)

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc.(As per PWD Uttarakhand specifications)

Random Rubble Masonary laid dry in breast wall,retaining wall, parapets,scupper etc. Including supply of all materials,labour,t & p& royality etc,required for proper complition of work.(As per PWD Uttarakhand specifications)

Providing and fixing Rolling Shutter of approved make made of required size M.S.laths interlocked together i/e all comp.

Providing and fixing of Ball bearing for rolling shutter i.e all comp.

PITAMBER SINGH GUSAIN