Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹73.5 LAccepted-AOC | L1 | Accepted-AOC l1 | |
| 2 | L2₹74.6 L+₹1.0 L (1.41%)Rejected-AOC | L2 | Rejected-AOC l2 | |
| 3 | L3₹75.5 L+₹2.0 L (2.67%)Rejected-AOC LID AND EW SECTION PALLIKKATHODU GRAMA PANCHAYATH | KOTTAYAM | KERALA | 686102 | L3 | Rejected-AOC l3 | |
| 4 | L4₹76.7 L+₹3.1 L (4.25%)Rejected-AOC | L4 | Rejected-AOC l4 | |
| 5 | L5₹77.8 L+₹4.3 L (5.82%)Rejected-AOC | L5 | Rejected-AOC l5 |
| Sl No | Description | Qty | Unit | P M JACOB L1 | JINU MATHEW KURIAN L5 | Shajimon Joseph L3 | NIKHIL T REJI L4 | Antony Jim L6 | JACKS TOM L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00Appendix A REACTIVE MAINTENANCE | |||||||||
| 1.00 | OD225030/2024-2025:Providing and fixing of vinyl printed sticker over existing running contract information board non-retro-reflectorized Vinyl sign with 1 year warranty manufactured Vinyl Printed sheet including lettering symbols etc | 8.64 | sqm | 1,003.28 ₹8,668.34 Lowest | 1,137 ₹9,823.68 | 1,031 ₹8,907.84 | 1,047 ₹9,046.08 | 1,130 ₹9,763.2 | 1,025 ₹8,856 |
| 1.00 | OD231714/2024-2025:Providing and fixing of DLP board with Non-retro-reflectorised Vinyl sign with 1 years
warranty manufactured Vinyl Printed sheeting fixed over aluminum sheeting 2 mm thick/
aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with
suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB
confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation
with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level
including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as
per approved drawing and clause 801 including lettering symbols etc. | 5 | sqm | 6,118.54 ₹30,592.7 Lowest | 6,945 ₹34,725 | 6,298 ₹31,490 | 6,389 ₹31,945 | 6,900 ₹34,500 | 6,250 ₹31,250 |
| 1.00 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. | 20.02 | cum | 2,250 ₹45,056.25 Lowest | 2,558 ₹51,223.95 | 2,320 ₹46,458 | 2,353 ₹47,118.83 | 2,500 ₹50,062.5 | 2,304 ₹46,137.6 |
| 1.00 | 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) | 15.04 | cum | 2,328 ₹35,010.79 Lowest | 2,646 ₹39,793.19 | 2,399 ₹36,078.56 | 2,434 ₹36,604.93 | 2,600 ₹39,101.4 | 2,382 ₹35,822.9 |
| 1.00 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. | 20.02 | cum | 4,917 ₹98,462.93 Lowest | 5,500 ₹1,10,137.5 | 5,067 ₹1,01,466.68 | 5,141 ₹1,02,948.53 | 5,500 ₹1,10,137.5 | 5,031 ₹1,00,745.78 |
| 1.01 | OD75921/2025-2026:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface. | 15.04 | cum | 8,489 ₹1,27,666.07 Lowest | 9,000 ₹1,35,351 | 8,745 ₹1,31,516.06 | 8,872 ₹1,33,426.01 | 9,600 ₹1,44,374.4 | 8,679 ₹1,30,523.48 |
| 1.01 | 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. | 24 | cum | 3,219 ₹77,256 Lowest | 3,500 ₹84,000 | 3,314 ₹79,536 | 3,362 ₹80,688 | 3,600 ₹86,400 | 3,290 ₹78,960 |
| 1.01 | 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. | 160 | sqm | 55.57 ₹8,891.2 Lowest | 60 ₹9,600 | 57.26 ₹9,161.6 | 58 ₹9,280 | 62 ₹9,920 | 57 ₹9,120 |
| 1.01 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. | 16,000 | sqm | 10.88 ₹1,74,080 | 10.5 ₹1,68,000 Lowest | 11.13 ₹1,78,080 | 11.29 ₹1,80,640 | 11 ₹1,76,000 | 11 ₹1,76,000 |
Tender Value
₹83.3 L
EMD Value
₹50,000
Closing Date
3 Jul 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer PWD Roads Division Kottayam
Reactive maintenance works, premonsoon works, pro active maintenance, etc
2025_PWD_772314_1
PWD/RB/TR/729/2025_5_1_1/1
Open Tender
Civil Works - Roads
Item Rate
365 days
karukachal
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹50,000
Yes
21 Aug 2025
27 Jun 2025
5 Jul 2025
27 Jun 2025
3 Jul 2025
27 Jun 2025
Amount
Appendix A REACTIVE MAINTENANCE
OD225030/2024-2025:Providing and fixing of vinyl printed sticker over existing running contract information board non-retro-reflectorized Vinyl sign with 1 year warranty manufactured Vinyl Printed sheet including lettering symbols etc
OD231714/2024-2025:Providing and fixing of DLP board with Non-retro-reflectorised Vinyl sign with 1 years warranty manufactured Vinyl Printed sheeting fixed over aluminum sheeting 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.
55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.
55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)
55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
OD75921/2025-2026:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.
4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.
5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
OD75931/2025-2026:MANUAL CLOSED GRADED Premix Surfacing/Mixed Seal Surfacing :- Case I, Type - A Providing, laying and rolling of close-graded premix surfacing material of 20 mm thicknesscomposed of 11.2 mm to 0.09 mm (Type-A) aggregates using penetration grade bitumen using V G 30 to therequired line, grade and level to serve as wearing course on a previously prepared base, including mixing in asuitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade
OD230667/2024-2025:Engaging labour with passenger not less than 1000cc for conducting and reporting routine inspection up to 20 KM per day for the entire length of project road at frequency of 7 days throughout the agreement period of running contract as directed by the departmental officers
APPENDIX B PRE MONSOON WORKS AND DISASTER MANAGEMENT
2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area
OD225008/2024-2025:Cutting of grass and light jungle using cutter with all expense
OD225007/2024-2025:Engaging Hydraulic Excavator for clearing soil on road surface
OD225005/2024-2025:Hire and running charges of tipper
OD225006/2024-2025:Engaging woodcutter with machine for cutting of trees, including cutting of trunks, branches and removal of stumps, roots etc
OD225004/2024-2025:Rent fore Crane
55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.
OD225003/2024-2025:Mazdoor
APPENDIX C PROACTIVE-PREVENTIVE MAINTENANCE
55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.
55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)
55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
OD225019/2024-2025:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface
OD225021/2024-2025:Filling up potholes with bituminous ready mix compound (25kg bag) and compacting by ramming to get a compact surface including of cost of material, laying charges, transportation to site etc. complete rate is arrived for a bag of 25 kg
4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method
4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.
5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
OD225020/2024-2025:Type A - by Manual Means : Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 of MORD
OD225024/2024-2025:Removing covering slabs carefully and replacing over the drain after cleaning the drain
55.23:Supplying and laying interlocking tile 80mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc. complete.
55.22:Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.; complete.
12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer - (Without formwork)
3.13.1.B:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. Ordinary soil - Mechanical Means - (Depth upto 3 m)
12.8.A.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15
12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer
12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications
OD225022/2024-2025:Steel work welded in built up sections/framed work including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc as required-In gratings,frames,guard bars,ladder,railings,brackets,gates and similar works
8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.
8.4.2:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 60 cm equilateral triangle
8.15:Supplying and installation of delineator (Roadway indicators) posts 80- 100cm high above ground level, pained black, and white in 15 cm wide strips, fitted with min. 80 x 100 mm rectangular or 75 mm dia circular retro reflectorized panels at the top with minimum visibility of 300m with provisions to prevent edge lifting and vandalisam, and conforming to clause 806 , IRC-79 and the drawings including fixing to ground (The deleniator shall be of approved type as per specification)
8.4.12:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminum sheeting, 2 mm thick/aluminum composite material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 50cmx 60 cm rectangular (Single chevron etc.)
55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.300 mm x 900 mm
8.35:Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :-
OD225023/2024-2025:Providing and fixing convex mirror 80 cm
OD225025/2024-2025:Providing and fixing convex mirror (OS-789) (24 inch) 60cm
8.6:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 High Intensity Micro Prismatic (Type IV) grade sheeting fixed over aluminum sheeting, 2 mm thick/aluminum composite material sheeting 4 mm thick with an area exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on suitably designed GI pipe pole not less than 50mm NB , 2 Nos. confirming to IS 1239, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.
Appendix D EMERGENCY WORKS
OD225012/2024-2025:Mazdoor
OD225017/2024-2025:Engaging Hydraulic Excavator for clearing soil on road surface
OD225011/2024-2025:Hire and running charges of tipper
OD225018/2024-2025:Engaging woodcutter with machine for cutting of trees, including cutting of trunks, branches and removal of stumps, roots etc
OD225010/2024-2025:Rent fore Crane
OD225016/2024-2025:Dry rubble masonry for foundation and superstructure
OD225015/2024-2025:Provision of metal drum/empty bitumen drum delineator, 300 mm in diameter, 800 mm high, filled with earth for stability, painted in circumferential strips of alternate black and white 100 mm wide fitted with reflectors 3 Nos of 7.5 cm dia, all as per IRC:SP:55-2001
OD225014/2024-2025:Filling up potholes with bituminous ready mix compound (25kg bag) and compacting by ramming to get a compact surface including of cost of material, laying charges, transportation to site etc. complete rate is arrived for a bag of 25 kg Assuming a average of 15 bags of 25kg ready mix compound will be laid in potholes in a day.
JACKS TOM (BID ID -2239271)
Shajimon Joseph (BID ID -2239617)
NIKHIL T REJI (BID ID -2238693)
JINU MATHEW KURIAN (BID ID -2239180)
Antony Jim (BID ID -2239581)
Bidder Name
Shajimon Joseph
P M JACOB
JINU MATHEW KURIAN
JACKS TOM
NIKHIL T REJI
Antony Jim
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .