Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹31.2 LAccepted-AOC 777 AMAR NAGAR VILLAGE TOWN CITY RAE BARELI RAEBARELI UTTAR PRADESH 229001 INDIA | RAE BARELI | UTTAR PRADESH | 229001 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹31.7 L+₹19,271.35 (0.61%)Rejected-Finance KHUDIRAMPALLY P O BANARHAT DISTT JALPAIGURI W B PIN 735202 | JALPAIGURI | WEST BENGAL | 735202 | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹31.8 L+₹24,186.85 (0.77%)Rejected-Finance BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹34.1 L+₹2.6 L (8.16%)Rejected-Finance NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L-4 | Rejected-Finance Being L-4 | |
| 5 | L-5₹34.4 L+₹2.9 L (9.05%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L-5 | Rejected-Finance Being L-5 |
Tender Value
₹41.2 L
EMD Value
₹82,400
Closing Date
6 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NORTH) BINNAGURI
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
SPECIAL REPAIR TO E/M INSTALLATION NO 18 AND BACK SIDE OF SHOPPING COMPLEX OF SOUTH ZONE AND CERTAIN OTHER PROVISION OF 02 X REVENUE WORKS AND 06 X MINOR WORKS AT BINNAGURI MIL STN UNDER GE (NORTH) BINNAGURI
2024_MES_639920_1
NIT No. 8701 / 47 / 2023-24 / 23 / E8
Open Tender
Civil Works
Item Rate
150 days
BINNAGURI CANTONEMNT
Class D Category a (i)
8 documents required · 8 mandatory
₹500
GE (NORTH) BINNAGURI
₹82,400
Yes
19 Mar 2024
31 Jan 2024
8 Mar 2024
31 Jan 2024
6 Mar 2024
22 Feb 2024
Amount
Demolition of brickwork built in cement mortar including complete all as specified and as directed.
M&L brickwork with fly ash bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and as directed.
Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:6) on concrete/brick wall surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 5mm thick plaster rendering on fair faces of concrete surfaces as in ceiling in CM(1:3) finished even and fair (without using extra cement) complete all as specified and as directed.
M&L for 15mm thick (10mm + 5mm) plaster of cement mortar (1:4) rendering on fair faces of brick work in two coats, mixed with water proofing compound in top layer @2% by the weight of cement or as per manufacturer's instructions finishing the surface even and fair complete all as specified and as directed. Note : Integral water proofing compound shall be measured and paid separately.
Supply only Liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed
M&L for applying two coats of exterior emulsion paint (weather coat) over a coat of exterior primer damp coat on a new or previously untreated plastered surfaces of facia, roof projection, chajja etc including necessary preparation of surfaces complete all as specified and as directed.
M&L preparing newly or previously untreated plastered surfaces of ceiling and applying three coats of white washing complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of walls and applying two coat of oil bound distemper over a coat of cement base wall putty complete all as specified and as directed.
Taking down existing tarfelt including tiles, lime concrete & screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50m and n.exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.
M&L for 15mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying acrylic polymer modified, fibre reinforced waterproof coating, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating roof guard or techno commercially equivalent make as listed in List Makes and as approved by the GE in 4 coats of application (a) Applying primer coat with Primer @ 0.3 kg /sqm (b) Over priming coat applying roof guard or techno commercially equivalent make as listed in List Makes and as approved by the GE as specified below or manufacturer instructions with fibre reinforcement a width of approx 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of roof guard or techno commercially equivalent make as listed in List Makes and as approved by the GE @0.75Kg/sqm (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer.
Demolition of plain cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.
M&L for 75mm thick PCC (1:4:8) type D-2 with using 40mm graded stone aggregates as in sub base finished the concrete surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L for PCC 1:2:4 Type B-1 (20mm graded aggregate) providing as in kerbs, copings, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
M&L 80 mm thick Machine pressede precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of Grade M-40 with grey cement and no pigment complete all as specified and as directed.
M&L Sand filling under floors or in foundations including watering and consolidation including Spreading and leveling in layers n exc. 40 mm thick complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished fair and even without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.
Dismantling floor, hearth or wall tilling including cement mortar being (but not backing), and rubbish off the premises complete all as specified and as directed.
M & L Machine cut kota stone slab in flooring 18 to 20 mm thick area of each tile exceeding 0.18sqm over and including 20mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for kota stone slab 18 to 20mm thick in riser or steps, skirting, dado and pillar laid over 10 mm thick screed bed cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Dismantling post or struts (Wood steel or RCC) any size and shape including taking out embedded portion in concrete, brick work and making good disturbed ground complete all as specified and as directed.
Dismantling of barbed any size and shape wire in any position complete all as specified and as directed.
Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surface (soft/loose soil) complete all as specified and as directed.
M&L for cement concrete in foundation, filling and mass concrete type C-2, 1:3:6 using 40mm graded aggregate as in foundation and as PCC band at ground level to hold bottom line of chain link fencing wire to cover gap complete all as specified and as directed.
Supply only chain link MS Galvanised fencing, any size or type complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.
S&F Mild steel work as in fencing posts, struts etc complete all as specified and as directed.
S&F for flat iron fillets for securing chain link/wire mesh including all necessary drilling, bolting or riveting etc, conforming to Fe-290, Gde E-165 complete all as specified and as directed.
Mils steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but (dia of neck 10mm and 10cm long) complete all as specified and as directed.
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.
Returning, filing in including spreading, leveling, watering and well ramming in layers n.exc 45cm thick in soft/loose soil complete all as specified and as directed.
Removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.
M&L for Precast RCC 1:2:4 type B1 (using 20mm graded aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face complete all as specified and as directed.
M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate as in foundation ,footing, grade beam etc complete all as specified and as directed.
M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate as in column complete all as specified and as directed.
Use and waste of formwork to sides of concrete foundations, footing bases of columns, raft and raft beams sides and soffits of foundation and plinth beams and similar work vertical or to batter complete all as specified and as directed.
Use and waste of form work to sides of RCC column square, rectangular of polygonal for rough finished surfaces of concrete complete all as specified and as directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item No 40 here in before as above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
S&F MS work framed work as in doors or gates of angle or other section with gusset plate, rails, brasses etc, complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including other hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing and conforming to Fe 410 W (Gde - E-250) quality B complete all as specified and as directed.
M&L for glazed ceramic coloured tiles 350x250x7/450x350x7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match with 10mm thick rendering in CM (1:4) as rough surface on vertical surfaces as backing coat of wall tiles complete all as specified and as directed.
M&L for two coat of synthetic enamel paint on steel surfaces or iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new or previously untreated surfaces and priming with red oxide etc complete all as specified and as directed
M&L for preparation of new steel and iron surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for two coats of aluminium paint on steel surfaces or iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new or previously untreated surfaces and priming with red oxide etc complete all as specified and as directed
M&L for framed work in tubular trusses such as roof trusses, trussed, purlines, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for PCC (1 : 2 : 4) type B-0 with using 12.50 mm graded stone aggregates as in benching / coping complete all as specified and as directed.
Taking down rolling shutter of any description exc 2 Sqm but n.exc 5 sqm each and removing to store from site, complete all as specified and as directed.
S&F for steel rolling shutter without ball bearing as specified including top cover, anchoring rod, hasp & staple and shop coat of primer erected in position as indicated complete push pull or manual type (thickness of lath 1 mm) complete all as specified and as directed.
Taking down chowkat with shutters (without taking of shutters from the frame) n.exc 1.5 Sqm each including buildings hardware and removing material from the work and making good surface complete all as specified and as directed.
S&F in repair galvanised stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.
S&F aluminum anodized louvered ventilators with glass louvers , without sash bars, of aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and with suitable locking arrangements including taking down old complete all as specified and as directed. Note :- Standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-09 Sheet 1/8 to 8/8.
S&F for solid PVC Wall Lining consisting of 5mm thick of wood grain printed PVC inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.
M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick wall in cm 1:4 complete all as specified and as directed.
Taking down chowkat or frame exc 1.5 sqm and n.exc 4.0 sqm each with shutters (without taking off shutters from the frames) including building hardwires etc including removing material from work site complete all as specified and as directed.
S&F in repair anodised aluminium frame powder coated of size100x44x1.5 mm thick made of square tubular coated aluminium section for doors with one or more rebates, jointing cleats for fixing etc and provision of aluminium door shutters (single/double) including jointing cleats, glazing clips, rubber gasket aluminium anodised snap beading, nylon wool pile weather strip, screws hold fast floor stopper, locking arrangement, handle of size not less than200 mm, 12 mm thick prelaminated partical board fixed in panels with minimum 3 Nos aluminium hinges 100 mm long for one shutter etc complete all as specified and as directed.
S&F in repair powder coated glazed aluminium portion with aluminium sections weighing 0.55 Kg/M and panel not exceeding area of 1.50 Sqm including necessary joining cleats glainy clips, rubber neoprene packing, beading screw, etc including necessary drilling in walls, floor & ceiling (minimum thickness of powder coating 50 micron) including 12 mm thick prelaminated particle board fixed in panel /5.5mm thick tinted glass complete all as specified and as directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) white bowl with cistern for coupled WC with PP soft close slim seat cover, Hinges, fixing accessories and accessories set, size 395x680x770mm including S trap 220 mm complete all as specified and as directed.
S&F in repair CP health faucet with one meter tube and hook complete all as specified and as directed.
S&F in repair CP toilet paper holder complete all as specified and as directed.
S&F in repair CP towel rail shelf 600mm long with lower hangers, stainless steel complete all as specified and as directed.
S&F in repair CP fancy bib tap 15 mm bore, fancy type Brass CP, fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and as directed.
S&F in repair vitreous china wash basin counter type, white oval shape including waste chain and plug and porcelain stopper but including brackets, waste pipe & CP waste coupling complete all as specified and as directed.
S&F in repair 15mm CP fancy pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe complete all as specified and as directed.
S&F in repair swivel shower of brass CP with shower arm 125 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed.
S&F in repair wall mixer complete all as specified and as directed.
S&F in repair 15mm CP fancy type Stop cock/angular stop cock (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.
S&F in repair 15mm bore medium grade galvanised tube with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
S&F in repair 20mm bore medium grade galvanised tube with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
M&L for granite 20mm thick factory polished fixed to RCC slab with neat cement slurry including cutting to shape ,grinding, polishing bulnosing etc all as directed complete all as specified and as directed.
M&L in repair brass chromium plated bottle traps for wash basins having bore of trap 32mm with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.
Demolition of RCC as in slab beam lintels, shelves chajjas reinforcement cut as required to facilitate demolition complete all as specified and as directed.
M&L RCC 1:1.5:3 Type A1 (using 20 mm graded stone aggregate) as in slab supported on walls chajjas, cooking platform etc complete all as specified and as directed.
M&L rounding to edge of stone, Granite slab, kota stone slab one edge, such as in steps, cooking platform and other similar work complete all as specified and as directed.
M&L for Verified Ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor and including 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified and as directed.
Dismantling wall and ceiling board (fibre, pulp, insulation, etc) or insulation boards / slabs / blanets, any thickness, including cover fillets complete all as specified and as directed.
S&F in repair 4mm thick 'E' classic designer board false ceiling with powder coated GI snap grid frame work of grid size 600 x 600 mm complete all as specified and as directed including all necessary drilling and necessary arrangement to fix items as under:- (a) 27x27x0.55 mm thick GI angle powder coated duly plugged @ 600mm centre to centre alongwith perimeter of wall. (b) 25x25x0.55 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders (n.exe 1.2 mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/wooden truss/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick AC "E" Classic designer board of approved texture and finished complete. Note : The complete ceiling work shall be done as per manufactures instruction and as directed.
M&L cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundations and Mass filling complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in surface channels and drain including necessary form work, moulds etc complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in drain coping etc with slightly chamfered or rounded angles including necessary form work if any and finishing exposed surface even and smooth without using extra cement complete all as specified and as directed.
M&L for PCC 1:2:4 type B0 (using 20mm graded stone aggregate) as in benching for drain with slightly chamfered or rounded angles including necessary form work if any, and finishing exposed surface even and smooth without using extra cement complete all as specified and as directed.
Extra for forming fair finish to drain or channel 30 cm internal girth in cement concrete using extra cement including forms moulds/mitred stopped ends etc complete all as specified and as directed.
M&L for framed work as in doors frame of angle or other section conforming to Fe 410-W(Gde-E- 250) quality-A with gusset plates, rails, braces, etc., and including fixing of hinges or other door fittings complete all as specified and as directed. Note: Door fittings like hinges, tower bolt etc shall be measured and paid separately.
S&F 35 mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass, gauze, etc 9without sash bars), edges of framing plain, chamfered rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.
S&F 125 mm long butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified and as directed.
S&F 150 mm long aluminium anodised barrel tower bolts complete all as specified and as directed.
S&F 150 mm size aluminium anodised door handles complete all as specified and as directed.
M&L for sliding door bolt of 300mm long plate aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer complete all as specified and as directed.
S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples and beads complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation (of main holes), filling and mass concrete all as specified and shown on drawing complete all as specified and as directed.
M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types on pillars set in cement mortar 1:3 on 10mm thick cement screed bed or bedding in CM1:4 etc complete all as specified and as directed.
M&L RCC type B-1, 1:2:4 (20mm graded BT stone aggregate) in lintel beam, chajja including necessary form work complete all as specified and as directed.
Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and as directed.
M&L for RCC Type B-1 (20mm graded stone aggregate) as in Slabs supported on walls including; plinth beams; bases for columns, etc; basement slabs under reamed piles and mass concrete complete all as specified and as directed.
M &L for stone hardcore of gauge n.exc 63 mm, spread and leveled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed
M&L for PCC 100 mm thick type B1 1:2:4 with 20 mm graded stone aggregate as in Floor finish etc including plate vibrating and finishing the surface by brooming complete all as specified and as directed.
M&L for 25mm thick pre-polished and chemically treated smooth finish exterior grade coloured chequered tile as in path all as complete and as specified and as directed.
S&F Rolled Mild Steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour aving tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for preparation of new plastered surfaces of wall and applying two coat of colour wash over a coat of white wash complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for three coats of white wash on walls over newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed.
S&F PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) bends any radius 110 mm provided with access door complete all as specified and as directed.
S&F PVC (SWR) vent cowl any radius 110 mm complete all as specified and as directed.
S&F PVC connection pipe 15mm size with P&M nuts of length 450mm complete all as specified and as directed.
S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F butt hinges 100mm size extruded aluminium anodised with galvanized mild steel hinge pin, type C1 complete all as specified and as directed.
S&F 125mm size aluminium anodised door handles complete all as specified and as directed.
S&F 10 ltr capacity PVC flushing cistern low level white colour including PVC connection PVC flush pipe of required length complete all as specified and as directed.
S&F for brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F 15 mm bore one way CP angle cock with flage complete all as specified and as directed.
S&F in repair brass chromium plated standard quality jet system suitable for European water closet complete all as specified and as directed.
S&F vitreous china wash basin, white, flat back, size 550x400m including CP Pillar taps, waste, chain & plug & porcelain stopper, brackets including cutting for pinning in ends of brackets or erecting stand and fixing and supply and waste pipe complete all as specified and as directed.
S&F vitreous china squatting pan "Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap from or back inlet etc including connection to trap and flushing pipe and provision of cement concrete bedding in repairs including demolition of existing one complete all as specified and as directed.
S&F in repairs of Vitreous China bowl urinal flat back, size of 465x355x265 mm White (minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed.
M&L concrete bed to drain pipe 1:4:8 type D-2 including packing under, and hunching against the sides of pieces after they are laid and tested in 100 mm dia pipes complete all as specified and as directed.
M&L 100mm dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.
M&L PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.
M&L for cutting into existing manholes for connecting new drains, for internal dia of 100mm pipe and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required complete all as specified and as directed.
M&L for 25mm thick pre-polished and chemically treated smooth finish exterior grade coloured chequered tile as in path including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M&L for PCC machine pressed precast apex stone, kerb stone or similar articles of PCC 1:2:4 type B1 (using 20mm graded stone aggregate) of set and jointed and pointed in cement mortar (1:4) finished even & smooth using extra cement including taking down complete all as specified and as directed.
Use and wate formwork to edges of rough finished surfaces of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.
Use and wate formwork to soffits of RCC/ PCC bands, floor or roof beams, beam launchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams, etc flat, rough finished surfaces of concrete complete all as specified and as directed.
INTERNAL ELECTRIFICATION Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
Material & Labour for concealed point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / ceiling fan /exhaust fan/ bell/buzzer point controlled by one 5 Amps one way switch complete all as specified and as directed for light controlled by one way switch 5/6 amps.
All as per item Ser No 135 above one ceiling fan/exhaust fan point controlled by one way switch 5/6 amps complete all as specified and as directed.
All as per item Ser No 135 above one socket out let 5/6 amps point on the same board complete all as specified and as directed.
All as per item Ser No 135 above one socket out let 5/6 amps point on the independent board complete all as specified and as directed.
All as per Item No 135 here in before but using 2.5 sqmm single core copper conductor cable of multistranded flame retardant PVC insulated 1100 volts grade for 5/15 amps switch socket combination point including running of 2.5 sqmm copper conductor flame retardant PVC wire as earth continuity conductor alongwith wiring and connecting to the common earth dolly complete all as specified and as directed.
S&F switch piano single pole flush type 5 amps, 230 volts one way complete all as specified and as directed.
S&F switch piano single pole flush type 15/16 amps, 230 volts one way complete all as specified and as directed.
S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.
S&F switch socket outlet 2 in 1, 5 Pin, 5/15 amps, multipurpose 230 volt flush type complete all as specified and as directed.
S&F switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and as directed.
S&F switch socket combination 2 and 3 Pin, 5/15 amps, multipurpose flush non shutter, non inter locking type white ivory finish with complete all as specified and as directed.
S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.
S&F in deluxe fan electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.
S&F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.
S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed.
S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.
S&F Recess mounting flat panel 34 Watt fitting (2*2) for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection including taking down the old unserviceable fitting complete all as specified and as directed.
S&F of metal exhaust fan AC single phase 230 volts of size 300mm sweep, 900 rpm, heavy duty with and including MS louver, cutting of the wall should not be less than 25mm the sweep diameter complete all as specified and as directed.
S&F for wall mounting fan with 300 mm sweep fan, energy efficient, AC single phase 240 volts, 50 Hz air delivery CMM and connecting up complete all as specified and as directed.
S&F of ceiling fan with all accessories 230 volts 1200 mm sweep BEE5 star rated confirming to IS 374:1979 complete prewired with three core cable complete all as specified and as directed.
Taking down & shifting of SPN 8 way DB from its existing location to the new location and connecting the existing cable complete all as specified and as directed.
S&F energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unserviceable fitting complete all as specified and as directed.
S&F energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.20 mtr long bend to required shape complete including removal of old unserviceable fitting complete all as specified and as directed.
M&L for Sub main wiring with 2 runs of 6.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked, medium grade of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. Note : Two runs of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length.
M&L for fixing louver of exhaust fan of existing size including removal of old unserviceable one complete all as specified and as directed.
S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.
S&F MCB, single pole & neutral, 32 to 63 Amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.
S&F MCB, single pole, 5 to 32 Amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.
S&F porcelain insulator of size 65 x 31 mm and height 30 mm with three nose hole including GI bolts and nuts of required size and two nose washer on including PCC block, fixing strip including taking out old unserviceable one complete all as specified and as directed.
Dismantling of existing unserviceable loose/disturbed aluminum strip/copper strip/GI Strip/Termination rod of any sizes on roof/down conductor fixed on wooden guities/directly on roof including screws etc complete all as specified and as directed.
Refixing of serviceable items received from appropriate item of same on roof/down conductor fixed on wooden guities/porcelain insulator/directly on roof including screws etc complete all as specified and as directed.
Supply and fixing aluminium strip of size 25 x 3.15 mm for earth continuity conductor fixed on PCC block complete all as specified and as directed.
Supply and fixing air termination single pointed aluminium rod 12mm dia and 300 mm long complete all as specified and as directed.
Material and labour for earthing complete with galvanized steel plate electrodes of size 600 x 600 x 6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, check nuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part-I including testing on complete all as specified and as directed.
EXTERNAL WATER SUPPLY Supply and lay or fixed on wall pipe galvanized, “Medium grade”, including fittings for 25 mm dia complete all as specified and as directed.
Supply and lay or fixed on wall pipe galvanized, “Medium grade”, including fittings for 20mm dia complete all as specified and as directed.
S&F multifunctional digital type timer Switch 240 volts AC Single Phase complete with and including taking down old unserviceable one complete all as specified and as directed.
S&F gun metal globe/gate valves with iron wheel head of 20 mm dia bore complete with all accessories complete all as specified and as directed.
M&L for cutting GI pipe alteration or addition of upto 40 to 50 mm dia before for insertion of reducer Tee complete with all accessories complete all as specified and as directed.
EXTERNAL ELECTRIC SUPPLY Supply, laying, testing LT underground electric power cable crossed linked XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 10 Sqmm 2 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts including all fixing and connecting accessories such as aluminium cable lugs, nut, bolts, washers etc complete all as specified and as directed. Note: Excavation, earth work, sand cushioning, protection brick / tiles / block clamps nuts bolts washers and pipe shall be measured and paid separately under appropriate items.
Supply, laying, testing LT underground electric power cable crossed linked XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 Sqmm 2 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts including all fixing and connecting accessories such as aluminium cable lugs, nut, bolts, washers etc complete all as specified and as directed. Note: Excavation, earth work, sand cushioning, protection brick / tiles / block clamps nuts bolts washers and pipe shall be measured and paid separately under appropriate items.
Supply and lay dry river sand filling for U/G cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.
Supply and laying sub class bricks of size 230 x 115 x 75mm (+/- 10% tolerance) for protection U/G cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.
M&L for 50 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.
S. G. CONSTRUCTION
M/s. MD IRSHAD
samrat saw mill and joinery workshop
L. B. SHARMA
SHRI PRADEEP PARIK
M/S S.K.DAS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .