REPAIR / MAINT / IMPROVEMENT OF LT DISTRIBUTION NETWORK AT DEVKATIYA AND PITHORAGARH UNDER GE MES PITHORAGARH.

Amount

DESCRIPTION OF ITEMS

Supply , laying, jointing & testing in replacement of XLPE insulated screened PVC bedded ,galvanised steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 16 Sqmm ,4 core confirming to IS 7098 Part-I complete with lugs and connectors as per rating all as specified and directed.

All as per ser item No. 1.00 here-in-before but 25 Sqmm 4 core

All as per ser item No. 1.00 here-in-before but 35 Sqmm 3½ core

All as per ser item No. 1.00 here-in-before but 50 Sqmm 3½ core

All as per ser item No.1.00 here-in-before but 70 Sqmm 3½ core

All as per ser item No.1.00 here-in-before but 95 Sqmm 3½ core

All as per ser item No.1.00 here-in-before but 120 Sqmm 3½ core.

All as per ser item No.1.00 here-in-before but 150 Sqmm 3½ core.

All as per ser item No.1.00 here-in-before but 185 Sqmm 3½ core.

All as per ser item No.1.00 here-in-before but 240 Sqmm 3½ core.

All as per ser item No.1.00 here-in-before but 300 Sqmm 3½ core.

Excavation in trenches in any type of soil n.exc. 1.5 mtr wide and n.exc 1.5 mtr in depth for laying of under ground cable and erection of steel poles and getting out in any type of soil omplete all as specified & directed.

Returning, filling in, any type of soil and spreading in layers n. exc 25 cm thick each layer including watering & well ramming complete all as specified & directed.

Removal of surplus soil to a distance n.exc 50 mtr & depositing where directed at a level n. exc. 1.5mtr above the starting point complete all as specified & directed.

M&L for providing of new sub class 'B' bricks old sizes, well burnt laid flat dry for protection of under ground cable complete all as specified & directed.

M&L for sand cushioning from local sand dry, filling in trenches around LT under ground cable complete all as specified & directed.

Supply and fixing / laying in replacement of galvanized iron pipe of 80 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.

All as above item 17 here in before but for 40 mm nominal dia complete all as specified and directed.

Cutting of floor/wall/road/footpath for removal of LT U/G cable of any size/description and making good the same as per existing specification after relaying the same or new cable and all as specified & directed.

Material and labour for PCC 1:3:6 type C-2,using stone aggregate 40mm graded as in foundation of stays and coping of poles including necessary form work where required and fair finish to the exposed surfaces including broken of existing PCC all as specified & directed.

Material and labour for PCC 1:4:8 type D-2, using stone aggregate 40mm graded as in foundation for electric poles and making of cable duct including necessary form work where required and fair finish to the exposed surfaces all as specified & directed.

Supply and fix in repairs loop-in loop-out box of size 20X20x15 cm made of 1.6mm thick PVC sheet weather proof, dust and vermin proof with hinged door of locking arrangements and slanting cover on top with provision of aluminium busbar of size 25 x 2mm - 4 No fixed on insulator complete fixed on pole with and including suitable size MS flat iron clamps, nuts, bolts and washers, etc complete all as specified & directed.

Supply and fixing in repair MCB single pole 6 amps to 32 amps 230 volts , C Curve , 10 KA complete all as specified.

Supply and fixing in repair PVC Conduit size 20 mm dia heavy duty Medium Grade ISI marked including clamp for fixing of service mains and twin core PVC cable fixed on wall/bldg complete all as specified and as directed.

Supply and fixing in repair PVC flexible conduit size 20 mm dia heavy duty including clamp for fixing of service mains and twin core PVC cable fixed on wall/bldg complete all as specified and as directed.

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and as directed.

Supply,installing,commissioning and testing in replacement of LT Panel/ LT feeder pillar outdoor type front and rear openable of dimension as per specified by manufacturer ,CPRI certified factory made cubical type weather and vermin proof fixed on and including ventilation and louvers arrangement with angle iron frame of size 50mm x 50mm x 6mm, pedastial type and provided with four Nos of angle iron supports ( size of legs 600mm) duly embedded in foundation by PCC 1:2:4 type B-1 using 20 mm graded stone aggregate and as directed at site fabricated out of 3.15 mm thick CRCA steel sheet with the degree of protection IP-54 and including duly painted powder coated and keeping adequate working space inside of the box and double door handle including front mounted cabinet, rod operated locking arrangement wih keys & countersunk holes at bottom for base mounting brackets and sheet steel gland plates for cable entry, formed gasket arround doors as directed before manufacturing the panel including Bus bar of following capacity and type with stainless steel nut bolts washers and spares holes with nut bolts on each bus bar and duly covered with shrinkable PVC sleeves as per colour coding ie Red, Yellow, Blue and Black & mounted on DMC / epoxy insulator and making connection of cables with appropriate size of lugs and cable glands and also two No danger Notice plate fixed on panel & Contd ......

The panel shall be prewired with suitable size PVC insulated copper conductor cable not less than 2.5 sqmm, multistranded complete all as specified and directed. Note (a) The contractor shall submit the drawing of panels for approval before manufacturing the panels. (b) All the MCCBs fixed in vertical ON/OFF positions with separate compartments for each swithgears. (c) All existing cable of any size will be connected with suitable size of cable lugs,glands, nut bolt etc as required at site and as directed (d) Cost of cable lugs, nut bolts, gland etc shall be deemed to be included in the above quoted rates. (e) Panels should be provided with lock of 2 key sets.

M & L in replacement of MS busbar chamber of nominal dimension 900 mm x 600 mm x 300 mm duly provided with aluminimum busbar of size 50 mm x 6mm fixed on porcelain insulators TPN type out door weather/vermin proof with both way opening duly provided with neoprene rubber gasket along the doors openings pedestal type duly painted powder coated on CRCA steel sheet encloser with one No incommer MCCB 200 Amp 36 KA complete with grouting of bus bar chamber in ground by using angle iron frame of size 40mm x 40mm x 5mm, PCC (1:2:4) type C-1 with 20mm graded stone aggregate. all as sepcified and directed incl making connection /thimbles etc complete all as specified and directed.

All as per srl item No 31.00 here-in-before but of size 600 mm x 600 mm x 300 mm and without MCCB

M & L in replacement of bus bar chamber, fixed on wall, 4 ways, 100 Amps ,415 V powder coated, water & vermin proof , IP-66 protection duly provided with front openable door incl provision of TPN copper bus bar of current carrying capacity 100 Amps with heat shrinkable colored PVC sleeve coated for phase and neutral and suitable for entry and exit of cable sizes upto 70 Sqmm complete all as specified and directed incl making connection /thimbles etc complete all as specified and directed.

M&L for Repairs & overhauling to LT ACBs of any capacity (400 A to 1000 A) of any make by removing out the breaker from the respective panels after taking proper electric shut down & disconnecting the breaker, checking it thoroughly for the defects & tripping system of the ACB and rectifing them, lubrication of moving contacts, overhauling of the ACB, replacement of wornout minor spares like springs, washers, levers, nuts & bolts etc reassembling , re-installation ,testing & commissioning of ACB complete and replacement of unserviceable parts all as directed. Note :(i) Cost of lubricants, cleaning agents, testing tools and minor spares shall be deemed to be including in quoted rates

Supply only in replacement of Moving Arcing contacts and adjust the contact pressure of LT ACB of any make any capacity complete all as specified and directed.

Supply only in replacement of fixed Arcing contact and adjust the contact pressure of LT ACB of any make any capacity complete all as specified and directed.

Supply only in replacement of main shaft assembly with crank & cam spacer of existing capacity (630/800 Amp) LT ACB of existing make & model and testing for proper operation complete all as directed.

Supply only in replacement of Trip coil of LT ACB of any make any capacity complete all as specified and directed.

M&L for Repairs & overhauling to LT APFC Panel of capacity 30 KVAr to 200 KVAr of any make by checking all the parts & accessories of respective panels & after taking proper electric shut down & disconnecting the APFC Panel from mains, checking it thoroughly for the defects & tripping system and serviceability of all MPP capacitors 6/8/10 stage relay settings of the APFC panels and rectifing them, replacement of U/s capacitors ,wornout minor spares like springs, washers, levers, nuts & bolts etc reassembling , re-installation ,testing & commissioning of APFC apnels complete and replacement of unserviceable parts all as directed. Note :(i) Cost of capacitors , Relay , MCBs,contactors,will be measured & paid separatley under relevant items. (ii) Cost of lubricants, cleaning agents, testing tools and minor spares shall be deemed to be including in quoted rates

S & F in replacement MCB Tripple pole of capacity 20 Amp for suitable for existing APFC Panel contactor/capacitor Note : Necessary addition /altration required to adjust MCB in the panel shall be done by the contractor and no extra payment will be made to the contractor.

S & F in replacement APFC Panel Relay micro processor based of 6/8/10 stage suitable for switching of APFC Panel contactor/capacitor Note : Necessary addition /alteration required to adjust MCB in the panel shall be done by the contractor and no extra payment will be made to the contractor.

S & F in replacement standard duty resin filled capacitor MPP type 440 V, 3 phase 5 KVAr. Note : Necessary addition /alteration required to adjust Capacitors in the panel shall be done by the contractor and no extra payment will be made to the contractor.

All as per Item No.42 above but of 7.5 KVAr

All as per Item No.42 above but of 8.5 KVAr

All as per Item No.42 above but of 10 KVAr

All as per Item No.42 above but of 15 KVAr

All as per Item No.42 above but of 20 KVAr

All as per Item No.42 above but of 30 KVAr

S & F in replacement contactor 440 V, 3 phase suitable for capacitor upto 8.5 KVAR. Note : Necessary addition /altration required to adjust Capacitors in the panel shall be done by the contractor and no extra payment will be made to the contractor.

All as per Item No.49 above but of 10 KVAr

All as per Item No.49 above but of 15 KVAr

M& L for ,servicing and complete overhauling of servo stablizer of capacity 160 KVA to 200 KVA including disassembling of operating mechanism parts, well cleaning with CRC-226 and replacing wornout parts reassembling of parts including disconnection,connection, well cleaning the complete stablizer, oil tank, connection plate,de-carbonizing all joints, metal parts and making servo stablizer operating in manual and electric mode including all routine testing ,calibration and replacement of unserviceable parts complete all as spd and directed. Note: (a) Any rewiring/changing of cable required for functioning of stablizer is included in the quoted rate. (b) Major Spares to be paid separately as given below.

Supply only in replacement Electronic cards including replacement of all worn - out parts like IC's , regulators, condensers, Triac, Transistors, transformers suitable for 160/200 KVA servo voltage stabilizer.

Supply only in replacement Micro switch.

Supply only in replacement R.C. Network card for motor

Supply only in replacement AC synchronous motor 240 volt 1 PH, 50 Hz 250 ma , 60 RMP , torque 10 Kg-cm suitable for 160 to 200 KVA

Supply only in replacement Voltmeter Digital type

Supply only in replacement Carbon Brushes

Supply only in replacement New Transformer Oil of 50 KV Die electric Strength.

Maintenance servicing and complete overhauling of servo stablizer of capacity 10 KVA to 60 KVA including disassembling of operating mechanism parts, well cleaning with CRC-226 and replacing wornout parts reassembling of parts including disconnection,connection, well cleaning the complete stablizer, oil tank, connection plate,de-carbonizing all joints, metal parts and making servo stablizer operating in manual and electric mode including all routine testing ,calibration and replacement of unserviceable parts complete all as spd and directed. Note: (a) Any rewiring/changing of cable required for funtioning of stablizer is included in the quoted rate. (b) Major Spares to be paid separately as given Below.

Supply only in replacement Electronic cards including parts like IC's , regulators, condensers, Triac, Transistors, transformers Etc. complete with digital display of Voltage and load and touch pad card suitable for 10 KVA to 60 KVA servo voltage stabilizers complete all as specified and as directed.

Supply only in replacement Micro switch.

Supply only in replacement R.C. Network card for motor

Supply only in replacement AC synchronous motor 240 volt 1 PH, 50 Hz 250 ma , 60 RMP , torque 10 Kg-cm suitable for 10 to 60 KVA

Supply only in replacement Carbon Brushes

Supply only in replacement New Transformer Oil of 50 KV Die electric Strength.

Supply only in replacement Dimmer as per existing capacity

Supply only in replacement Gears as per existing capacity

M&L for shifting of existing LT/APFC panel with disconnection of existing cables and reconnecting it after grouting of pane at different place as directed for grouting of LT/APFC Panel by using PCC (1:2:4) type B-1 with 20mm graded stone aggregate complete all as specified and directed.

M&L in replacement for fabrication of door/surfaces of LT panel indoor/outdoor as per existing size / thickness/shape and fitted in the panel with door handle, formed gasket around doors, lock insets, earthing strips, door stay, hinges,rivets etc. including two coat of synthetic enamel paint by spray painting on inside/outside surface of panel,all as specified and directed

M&L for preparing old painted surface of panel board by cleaning removing of the old paint by scracthing with wire bursh/sand paper etc and including denting/patching of broken/rusted surfaces etc and apply one coat of synthetic enamel paint by spray painting on inside/outside surface of panel,all as specified and directed.

M& L in replacement for Panel Wiring in relacement with suitable size PVC insulated PVC sheathed 1100 volts grade FRLS type with copper conductor multistranded cable with lugs on both ends of cable including dressing with taping , insulation of LT incoming & outgoing cable complete all as specified & directed.

M& L in replacement for Wiring size 2.5 Sqmm FRLS type single core with copper conductor multistranded cable with lugs complete all as specified & directed.

Supply and fix in replacement copper bus bar in the panel of exsiting size and capacity for phase and neutral with heat shrinkable including PVCsleeves in different colour codes for phase indication all as per directed.

All as per item No 74.00 above but aluminium bus bar complete all as specified & directed.

S & F in replacement LED type phase indication lamp of Red /blue/Green colour for phase indication in existing panels complete all as specified and directed.

All as per item No 77 Above but (VSS) for checking of voltage.

S& F in replacement Digital volt meter 0 to 500 volt

S& F in replacement Digital Ammeter 0 to 800 Amp with CT of suitable ratio

S& F in replacement Digital Multi function meter complete all as specified and as directed.

S&F in replacement of Aluminium Lugs/connectors of size 16 sqmm

S&F in replacement of Aluminium Lugs/connectors of size 25 sqmm

S&F in replacement of Aluminium Lugs/connectors of size 35 sqmm

S&F in replacement of Aluminium Lugs/connectors of size 50 sqmm

S&F in replacement of Aluminium Lugs/connectors of size 70 sqmm

S&F in replacement of Aluminium Lugs/connectors of size 95 sqmm

S&F in replacement of Aluminium Lugs/connectors of size 120 sqmm

S&F in replacement of Aluminium Lugs/connectors of size 150 sqmm

S&F heat shrink LT end joints of size 120 sqmm to 150 sqmm

S&F heat shrink LT end joints of size 185 sqmm to 240 sqmm

S&F heat shrink LT end joints of size 300 sqmm to 400 sqmm

S&F heat shrink LT straight through joints of size 70 sqmm to 95 sqmm

S&F heat shrink LT straight through joints of size 120 sqmm to 150 sqmm

S&F heat shrink LT straight through joints of size 185 sqmm to 240 sqmm

S&F heat shrink LT straight through joints of size 300 sqmm to 400 sqmm

S&F of PVC insulating tape roll of 10 mtr length and 15 mm wide for cable insulation and joints of cable & connectors complete all as directed.

S & F in replacement MCCB 415 Volts 4 pole 400 Amps 50 Hz 50 KA of existing make model and type alonwith spreader terminal with adjustable thermal setting including lugs/thimbles of suitable size in existing panels complete all as specified and directed. Note : Necessary addition /alteration required to adjust MCCB in the panel shall be done by the contractor and no extra payment will be made to the contractor.

All as per Item No.98 above but of MCCB 315 Amps 4 pole 50 Hz 415 V with rupturing capacity 36 KA

All as per Item No.98 above but of MCCB 250 Amps 4 pole 50 Hz 415 V with rupturing capacity 36 KA

All as per Item No.98 above but of MCCB 200 Amps 4 pole 50 Hz 415 V with rupturing capacity 36 KA

All as per Item No.98 above but of MCCB 100 Amps 4 pole 50 Hz 415 V with rupturing capacity 25 KA

All as per Item No.98 above but of MCCB 63 Amps 3 pole 50 Hz 415 V with rupturing capacity 16 KA

S&F in replacement of ON LOAD Change over switch enclosed in sheet metal enclosure box complete with all accessories like nut bolts,connector etc of capacity 200 Amp 4 pole 3 phase 415 Volts supply with front mounted handle operated all as directed

All as per Item No.104 above but of capacity 100 Amps 4 pole 50 Hz 415 V all as directed

S&F in replacement for contactor MNX 40 of existing make/model suitable for street light timer including dismantling existing un serviceable from the timer assembly and making reconnection all as specified and directed.

S&F in repair contactor rating 63 Amp-70 Amp of existing make/model suitable for street light timer including dismantling existing un serviceable from the timer assembly and making reconnection all as specified and directed.

Supply & fixing in replacement shackle type porcelain vitreous white, brown or green insulator including one galvanised mild steel straps, washers and nut 75 mm height, 90 mm dia for 1100 volts grade, including removal of existing insulators complete all as specified & directed.

Supply & fixing in replacement pin type porcelain vitreous white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut 100 mm height, 65 mm dia for 1100 volts grade, including removal of existing insulators complete all as specified & directed.

Taking down of old aluminium conductor of any description /size from LT Poles including cross arms, bracing and other steel accessories complete all as specified & directed.

Unbinding from insulators and Restringing/Restretching ACSR conductor of any size on LT poles including binding with 2mm dia aluminium binding wire all as specified & directed. Note : Cost of binding wire shall be included in the rate.

Unbinding and Restringing/Restretching of GI earth wire 04mm dia on LT poles and including wire with 1.63mm dia GI binding wire all as specified & directed. Note : Cost of binding wire shall be included in the rate.

Supply & fixing in replacement ACSR conductor of any size including binding on existing LT poles or new poles with 02mm dia aluminium binding wire all as specified & directed by the Engineer-in-charge.

Supplying, drawing and fixing in replacement of contineous GI earth wire/gaurd/cradles of 4mm dia including GI binding wire 1.63 mm and GI holding hook on LT poles incl taking down old rusted GI wire all as specified and directed by Engineer-in-charge.

M&L in repair/replacement for earthing complete with using galvanized mild steel earth plate (electrode) 600 mmx 600 mmx 6.0 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 32X6 mm GI earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg) complete all specified and directed.

M& L in replacement for fixing of air termination, single pointed aluminum rod 12 mm dia and 300 mm long. Note: All accessories for fixing of termination is included in the quoted rates.

S&F in repair/replacement of aluminium strip 25x3.15mm with saddles and fixing screws etc for roof conductor and down conductors above ground all as specified & directed by Engg-in-charge.

S&F in replacement for galvanized iron strip 32x6mm buried into ground all as specified & directed.

S&F in replacement of test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos 8 mm dia, 25mm long, hex head screw.

M&L in replacement for GI tube light grade galvanized with all fittings fixed complete in walls and ceiling of 25 mm dia.

S & F in replacement of PVC DMC blocks with nut bolts in PCC blocks. Note: All additional items required for fixing and connecting to strip is included in the quoted rate.

Clearing away all grass vegetation ,saplings, shrubs, brush wood undergrowth roots and trees not exceeding 30 CM girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance soft/loose soil and getting out including spreading of anti vegitation chemical on complete Area all as directed and specified.

Supply and erection (in truly vertical position) in replacement of LT Steel tublar swaged pole complete with cast iron base plate finial taper plug, bolt , nut and screwed type 410 SP 31 09 mtrs long Class -10 including painting of poles with two coats of synthetic enamel paint in red and white strips upto 1.5 mtr height from coping over a coat of red oxide primer including numbering of poles as directed by Engineer in charge. Note : PCC, Earth work and MS work as cross arms clamps etc will be measured and paid separately.

S&F in replacement Supply and fixing post top lantern LED type 20 Watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

_ditto- as above item No 124 but for capacity 40 Watt complete all as specified and as directed

S&F in replacement LED Bollard light fittings of 600 mm height energy saving eco friendly robust body of capacity 8 watt to 10 watt with PCC works and fixing arrangement complete all as directed.

S&F in replacement LED Globe light fittings transparent hard PVC poly carbonated of bottom dia of globe 10 mm to 20 mm with bulb holder and bulb of cap 9 watt-10watt fixing arrangement complete all as directed.

S&F in repair driver of post top energy saving LED gate light of capacity 20 watt-70 Watt all as directed.

S&F in repair driver of Bollard LED light of capacity 8 watt-10 watt all as directed.

S&F in repair digital electronic timer astronomical type switch assembly as per existing capacity and ranges complete all as specified & directed

S& F in replacement LED MPPT (Maximum Power Point Tracking) solar integrated street light system (all in one type) fittings capacity 20 Watt with solar charging full sunlight 24 hrs backup, run time minimum 24 hrs, including High efficiency Mono crystalline Solar PV Module , Lithium Ferro Phosphate Battery with inbuilt (Battery Management system) BMS technology , high efficacy LED , MPPT Solar Charge Controller and aluminium extruded body IP 66 rating and is specially programmed for automatically controlling the dimming and brightness of light via PIR motion sensor complete all as specified and directed.

Supply and fixing in replacement LED flood light powder coated pressure die cast aluminium compact ,with surface mounting diode and heat resistance toughened glass suitable for 50 Watt IP-66 protection complete all as as specfied & directed

Supply and fixing in replacement LED flood light powder coated pressure die cast aluminium compact ,with surface mounting diode and heat resistance toughened glass suitable for 120 Watt IP-66 protection complete all as as specfied & directed

Supply and fixing in replacement LED street light fitting, 60 Watt IP-66 degree of protection, compact & robust design With minimum system efficiency as > 85 % ,made of Pressure die cast aluminum housing powder coated in graphite grey and heat resistant thoughned glass with excellent thermal management including PVC cable connector, LED's should have lens optics and vandal proof prismatic poly carbonate covers for ensuring efficient optics and uniform distribution of light. Fitting should have operating voltage range of 120 - 270 VAC , THD <10% , P.F >.95, the fitting should have in built surge protector of 5 KV, complete all as as specfied & directed

S&F in replacement of 1100 Volts grade heavy duty cable twin core Aluminum solid conductor with inner seathed with PVC tapes of size 6 Sqmm complete all as as specfied & directed.

All as per sr item No 135 here in before but 10 Sqmm twin core Aluminum solid conductor complete all as as specfied & directed.

M& L for Cleaning and preparation of LT overhead line pole complete and painting with one coat of aluminium paint including channels/ brackets , cross arms and making red & white strips with synthetic enameled paint of 30 cm height, each alternative strip upto 1.5 mtr height and writing pole numbers with yellow synthetic enameled paint after making circular base with black synthetic enameled paint and applying two coats of white wash on existing PCC coping complete all as specified & directed.

Excavation in trenches for each additional 1.5m or part there of in depth beyond the first 1.5 m in depth and 1.5 mtr wide and getting out in any type of soil complete all as specified.

Note : Tenderers may note that amount of credit Rs 1,28,461.05 will be deducted from the total amount arrived, at the time of Acceptance of contract.

SHAHJEE FRIDGE SERVICE (BID ID -3326527)