Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.3 Cr
EMD Value
₹3.3 L
Closing Date
26 Apr 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Carrying out of balanced work in B14 B22 B24 B25 Quarters at Nabinagar TPP 4 250 MW at risk and cost of previous agency Ms Mundeshwari Construction.
NBCC/SBGBihar/PAT/BRBCL/2023/69~EWcb2481d8ff6d82a494ad4fbc
NBCC/SBGBihar/PAT/BRBCL/2023/69
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹3.3 L
26 Apr 2023
18 Apr 2023
26 Apr 2023
18 Apr 2023
26 Apr 2023
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Earth work in excavation by mechanical means (Hydraulic excavator)
/ manual means over areas (exceeding 30cm in depth. 1.5 m in
2.6 width as well as 10 sqm on plan) including disposal of excavated
earth, lead upto 50m and lift upto 1.5m, disposed earth to be
levelled and neatly dressed.
2.6.1 All kinds of soils Cum. 81.48 151.10 12312.22
Excavating trenches of required width for pipes, cables, etc.
including excavation for sockets, and dressing of sides, ramming of
bottoms depth upto 1.5 m including getting out the excavated soil,
2.10 and then returning the soil as required in layers not exceeding 20 cm
in depth including consolidating each deposited layer by ramming,
watering etc. and disposing of surplus excavated soil as directed,
within a lead of 50 m.
2.10.1 All kinds of soil
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm
Supplying and filling in plinth with Jamuna sand under floors,
including watering, ramming, consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade
4.1 excluding the cost of centering and shuttering - All work up to plinth
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1
cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal
4.17 size) over 75 mm thick bed of dry brick ballast 40 mm nominal size Sqm 263.04 327.45 86133.74
well rammed and consolidated and grouted with fine sand, including
finishing the top smooth.
REINFORCED CEMENT CONCRETE WORK
Centering and shuttering including strutting, propping etc. and
removal of forms for:
5.9.1 Foundations, footings, bases of columns etc. for mass concrete. Sqm 49.34 190.77 9412.67
Centring and shuttering; Suspended floors, roofs, landings, balconies
and access platform.
5.9.4 Shelves (cast in situ) Sqm 64.00 390.04 24962.71
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 225.00 322.55 72573.94
5.9.6 Columns, pillars, piers, abutments, posts and struts. Sqm 191.00 440.25 84087.40
5.9.7 Stairs, (excluding landings) except spiral-staircases Sqm 384.22
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
5.9.9 Arches, domes, vaults upto 6m span Sqm 109.66 1,035.48 113548.89
Vertical and horizontal fins individually or forming box louvers band,
facias and eaves boards
Extra for shuttering in circular work (20% of respective centering
and shuttering items)
5.9.16 Edges of slabs and breaks in floors and walls
5.9.16.1 Under 20 cm wide Metre 113.04
5.9.19 Weather shade, Chajjas, corbels etc. including edges. Sqm 63.26 478.12 30244.03
Extra for additional height in centering, shuttering where ever
required with adequate bracing, propping etc., including cost of de-
5.11 shuttering and decentering at all levels, over a height of 3.5 m, for
every additional height of 1 Meter or part thereof (Plan area to be
Suspended floors, roofs, landing, beams and balconies (Plan area to
Steel reinforcement for R.C.C. work including straightening, cutting,
5.22 bending, placing in position and binding all complete upto plinth
5.22.6 Thermo-Mechanically Treated bars Kilogram
Steel reinforcement for R.C.C. work including straightening, cutting,
5.22A bending, placing in position and binding all complete above plinth
5.22A.6 Thermo-Mechanically Treated bars Kilogram 8,500.00 10.85 92201.09
Providing and laying in position machine batched and machine mixed
design mix M-25 grade cement concrete for reinforced cement
concrete work, using cement content as per approved design mix,
including pumping of concrete to site of laying but excluding the cost
of centering, shuttering, finishing and reinforcement, including
5.33 admixtures in recommended proportions as per IS: 9103 to
accelerate, retard setting of concrete, improve workability without
impairing strength and durability as per direction of Engineer-in-
charge. (Note :- Cement content considered in this item is @ 330
kg/cum. Excess/less cement used as per design mix is
payable/recoverable separately).
5.33.1 All works upto plinth level Cum 20.00 3,722.32 74446.47
5.33.2 All works above plinth level upto floor V level. Cum 70.00 4,419.96 309397.32
Brick work with common burnt clay FPS(non modular) brick of class
designation 7.5 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 50.14 4,089.07 205028.77
Brick work with common burnt clay F.P.S. (non modular) bricks of
6.4 class designation 7.5 in superstructure above plinth level up to floor
V level in all shapes and sizes in :
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 190.00 4,816.33 915101.91
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Half brick masonry with common burnt clay F.P.S. (non modular)
6.13 bricks of class designation 7.5 in superstructure above plinth level up
to floor V level.
6.13.2 Cement mortar 1:4 (1 cement : 4 coarse sand). Sqm 262.00 569.44 149194.15
Brick edging 7cm wide 11.4cm. deep to plinth protection with
common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 including grouting with cement mortar
1:4 (1 cement : 4 fine sand).
Providing and fixing ISI marked flush door shutters conforming to
IS:2202 (Part 1) non decorative type, core of block board
9.21 construction with frame of 1st class hard wood and well matched
commercial 3 ply veneering with vertical grains or cross bands and
face veneers on both faces of shutters.
35mm thick including ISI marked Stainless Steel butt hinges with
necessary screws
Providing and fixing wire gauge shutters using galvanized M.S. wire
gauge of average width of aperture
1.4 mm in both directions with wire of dia 0.63 mm, for doors,
windows and clerestory windows with hinges and necessary screws :
9.27.1 35 MM THICK SHUTTERS
with ISI marked M.S. pressed butt hinges bright finished of required
9.27.1.1.1 Second class teak wood Sqm 357.84 2,974.53 1064405.05
Providing and fixing M.S. grills of required pattern in frames of
9.48 windows etc. with M.S. flats, square or round bars etc. including
priming coat with approved steel primer all complete.
9.48.1 Fixed steel window by welding kg 10,263.17 105.85 1086355.30
Providing and fixing oxidised M.S. Safety chain with necessary
fixtures for doors, (weighting not less than 450 gms)
Providing and fixing aluminium sliding door bolts ISI, marked
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or shade, with nuts and
screws etc. complete:
Providing and fixing aluminium tower bolts ISI marked anodised
(anodic coating not less than grade AC
10 as per IS: 1868) transparent or dyed to required colour or shade
with necessary screws etc. complete
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Providing and fixing aluminium pull bolt lock, ISI marked, anodized
(anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed of required colour and shade, with necessary
screws bolts, nut and washers etc. complete.
Providing and fixing aluminium handles ISI marked anodised (anodic
coating not less than grade AC 10 as per IS:1868) transparent or
dyed to required colour or shade with necessary screws etc.
providing and fixing Aluminium hanging floor door stopper, ISI
marked, anodised (Anodic coating not less than grade AC 10 as per
IS:1868) transparent or dyed to required color and shade with
necessary screws etc. complete
9.101.2 Twin rubber Stopper Each 336.00 81.52 27392.01
STRUCTURAL STEEL WORK
Providing and fixing pressed steel door frames conforming to IS:
4351, manufactured from commercial mild steel sheet of 1.60 mm
thickness, including hinges, jamb, lock jamb, bead and if required
angle threshold of mild steel angle of section 50x25 mm, or base ties
10.14 of 1.60 mm, pressed mild steel welded or rigidly fixed together by
mechanical means, including M.S. pressed butt hinges 2.5 mm thick
with mortar guards, lock strikeplate and shock absorbers as
specified and applying a coat of approved steel primer after pre-
treatment of the surface as directed by Engineerin-charge:
10.14.1 Profile B
10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb. Meter 623.60 366.78 228726.80
10.14.2 Profile C
10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb. Metre 632.40 389.36 246232.87
Steel work welded in built up sections / framed work, including
10.25 cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladders, railings, brackets, gates and
Providing and fixing hand rail of approved size by welding etc. to
10.26 steel ladder railing, balcony railing, staircase railing and similar
works, including applying a priming coat of approved steel primer.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4
11.3 graded stone aggregate) finished with a floating coat of neat cement
including cement slurry, but excluding the cost of nosing of steps
11.3.1 40 mm thick with 20 mm nominal size stone aggregate. Sqm 327.02 219.93 71920.41
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Cement plaster skirting up to 30 cm height, with cement mortar
11.6 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat
Kota stone slab flooring over 20 mm (average) thick base laid over
and jointed with grey cement slurry mixed with pigment to match
the shade of the slab, including rubbing and polishing complete with
base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
Kota stone slabs 20mm thick in risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :
11.27 3 coarse sand) and jointed with grey cement slurry mixed with Sqm 144.06 1,057.24 152309.46
pigment to match the shade of the slabs, including rubbing and
polishing complete.
Extra for prefinished nosing in treads of steps of kota stone/sand
Extra for Kota stone / sand stone in treads of steps and risers using
single length upto 1.05 Meter
Providing and fixing Ist quality ceramic glazed wall tiles conforming
to IS: 15622 (thickness to be specified by the manufacturer), of
approved make, in all colours, shades except burgundy, bottle
green, black of any size as approved by Engineer-in-Charge, in
11.36 skirting, risers of steps and dados, over 12 Sqm 1,354.32 722.45 978428.27
mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with
pigment of matching shade complete.
Providing and laying Ceramic glazed floor tiles of size 300x300mm
(thickness to be specified by the manufacturer) of 1st quality
conforming to IS:15622 of approved make in colours such as White,
Ivory, Grey, Fume Red Brown, laid on 20mm thick Cement Mortar
1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement and matching pigment etc. complete.
Providing and laying vitrified floor tiles in different sizes (thickness
to be specified by the manufacturer)
with water absorptions less than 0.08% and conforming to IS:15622
of approved make in all colours and shades, laid on 20 mm thick
cement mortar 1:4 (1 cement : 4 coarse sand) including grouting
the joints with white cement and matching pigments etc. complete
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Providing and laying Vitrified tiles in different sizes (thickness to be
specified by manufacturer) with water absorption less than 0.08 %
and conforming to I.S. 15622, of approved make in all colours &
11.46 shade in skirting, riser of steps, over 12 mm thick bed of
cement mortar 1:3 (1 cement: 3 coarse sand), including
grouting the joint with white cement & matching pigments etc.
Painting top of roofs with bitumen of approved quality @ 17kg per 10
sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm,
including cleaning the slab surface with brushes and finally with a
piece of cloth lightly soaked in kerosene oil complete :
12.15.1 With residual type petroleum bitumen of grade VG - 10 Sqm 508.34 137.80 70048.91
Providing gola 75 x 75 mm in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 stone aggregate 10 mm and down gauge) including
finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per
standard design.
Making khurras 45x45 cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate of 20 mm nominal size)
over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm
cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat
cement, rounding the edges and making and finishing the outlet
Providing and fixing on wall face unplasticised - Rigid PVC rain water
pipes conforming to IS:13592
Type A, including jointing with seal ring conforming to IS:5382,
leaving 10mm gap for thermal expansion (i) Single socketed pipes
Providing and fixing on wall face unplasticised - PVC moulded fittings
/ accessories for unplasticised - Rigid PVC rain water pipes
conforming to IS: 13592 Type A, including jointing with seal ring
conforming to IS:5382 leaving 10mm gap for thermal expansion.
12.42.1 Coupler
12.42.2 Single Pushfit Coupler
12.42.4 Single tee without door
12.42.6 Shoe (Plain)
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Providing and fixing unplasticised - PVC pipe clips of approved design
to unplasticised - PVC rain water pipes by means of 50x50x50mm
hard wood plugs, screwed with M.S. screws of required length,
including cutting brick work and fixing in cement mortar 1:4 (1
cement : 4 coarse sand) and making
good the wall etc. complete
Providing and fixing to the inlet mouth of rain water pipe cast iron
grating 15 cm diameter and weighing not less than 440 grams.
13.1 12mm cement plaster of mix:
15 mm cement plaster on rough side of single or half brick wall of
12mm cement plaster finished with a floating coat of neat cement of
13.16 6 mm cement plaster of mix:
Applying one coat of water thinnable cement primer of approved
brand and manufacture on wall surface
13.43.1 Water thinnable Cement Primer Sqm 14,552.68 34.81 506636.00
13.50 Applying priming coat
With ready mixed pink or Grey primer of approved brand and
manufacture on wood work (hard and soft wood).
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade:
13.60.1 Two or more coats on new work Sqm 14,552.68 78.17 1137634.53
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :
13.61.1 Two or more coats on new work Sqm 2,926.64 72.25 211449.56
SANITARY INSTALLATION
Providing and fixing water closet squatting pan (Indian type W.C.
pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level
white P.V.C. flushing cistern, including flush pipe, with manually
controlled device (handle lever) conforming to IS : 7231, with all
fittings and fixtures complete, including cutting
and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm
with integral type foot rests
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and
floors wherever required
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 12.00 3,185.19 38222.26
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require
White vitreous China Flat back wash basin size 550 x 400 mm with
single 15 mm C.P. brass pillar taps
Providing and fixing stainless steel A I.S.I. 304 (18/8) kitchen sink as
per IS:13983 with C.I. brackets and stainless steel plug 40 mm
including painting of fittings and brackets, cutting and making good
the walls wherever required:
17.10.1 Kitchen sink with drain board
Providing and fixing PVC waste pipe for sink or wash basin including
PVC waste fittings complete
17.28.2 Flexible pipe
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
Providing and fixing 600 x 120x 5 mm glass shelf with edges round
off supported on anodised aluminium angle frame with C.P. brass
brackets and guard rail complete fixed with 40 mm long screws, rawl
plugs etc. complete.
17.34 Providing and fixing toilet paper holder:
17.35 Providing and fixing soil, waste and vent pipes:
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:
17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS:3989 Meter 252.48 768.43 194013.57
Providing and fixing bend of required degree with access door,
insertion rubber washer 3 mm thick, bolts and nuts complete:
17.38.1.2 Sand cast iron S&S as per IS:3989. Each 48.00 374.55 17978.56
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
17.38.2.2 Sand cast iron S&S as per IS:3989. Each 48.00 309.30 14846.18
17.39 Providing and fixing plain bend of required degree
17.39.1.2 Sand cast iron S&S as per IS:3989. Each 96.00 326.05 31300.50
17.39.2.2 Sand cast iron S&S as per IS:3989. Each 48.00 241.61 11597.26
Providing and fixing single equal plain junction of required degree
17.43 with access door, insertion rubber washer 3mm thick bolts and nuts
17.43.1.2 Sand cast iron S&S as per IS:3989. Each 48.00 605.77 29077.06
17.43.2.2 Sand cast iron S&S as per IS:3989. Each 48.00 459.28 22045.52
17.44 Providing and fixing single equal plain junction of required degree
17.44.1.2 Sand cast iron S&S as per IS:3989. Each 144.00 559.55 80574.89
17.44.2.2 Sand cast iron S&S as per IS:3989. Each 48.00 393.88 18906.15
17.48 Providing and fixing single unequal plain junction of required degree:
17.48.1.2 Sand cast iron S&S as per IS:3989. Each 48.00 444.47 21334.68
17.56 Providing and fixing terminal guard
17.56.1.2 Sand cast iron S&S as per IS:3989. Each 48.00 421.94 20253.26
17.56.2.2 Sand cast iron S&S as per IS:3989. Each 16.00 360.04 5760.57
17.57 Providing and fixing collar
17.57.1.2 Sand cast iron S&S as per IS:3989. Each 160.00 309.15 49463.95
17.57.2.2 Sand cast iron S&S as per IS:3989. Each 208.00 213.40 44387.04
Providing lead caulked joints to sand cast iron/centrifugally cast
(spun) iron pipes and fittings of diameter.
Providing and fixing M.S. stays and clamps for sand cast iron /
centrifugally cast (spun) iron pipes of diameter.
Providing and fixing trap of self cleansing design with screwed down
17.6 or hinged grating with or without vent arm complete, including cost
of cutting and making good the walls and floors:
17.60.1 100 mm inlet and 100 mm outlet
17.60.1.1 Sand cast iron S&S as per IS:3989 Each 48.00 936.03 44929.61
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
17.60.2 100 mm inlet and 75 mm outlet
17.60.2.1 Sand cast iron S&S as per IS:3989 Each 144.00 973.28 140151.64
Cutting chases in brick masonry walls for following diameter sand
cast iron/ centrifugally cast (spun) iron pipes and making good the
same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6
graded stone aggregate 12.5 mm nominal size ), including necessary
plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste
vent pipes and fittings with two coats of synthetic enamel paint of
any colour such as chocolate grey, or buff etc. over a coat of primer
(of approved quality) for new work :
17.65.1 100 mm diameter pipe Meter
17.65.2 75 mm diameter pipe Meter
Providing and fixing G.I. pipes complete with G.I. fittings and
clamps, including cutting and making good the walls etc.
18.10.1 15mm dia nominal bore Meter 100.80 208.52 21019.25
18.10.2 20mm dia nominal bore Meter 408.80 241.66 98789.89
18.10.3 25mm dia nominal bore Meter 1,267.36 294.86 373687.55
18.10.4 32mm dia nominal bore Meter 85.80 332.74 28548.90
18.10.5 40mm dia nominal bore Meter 145.60 412.77 60098.74
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps
i/c making good the walls etc. concealed pipe, including painting with
anti corrosive bitumastic paint, cutting chases and making good the
18.11.1 15 mm dia nominal bore Meter 412.80 290.83 120052.57
18.11.2 20 mm dia nominal bore Meter 374.40 317.82 118992.41
Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end)
18.17.3 40 mm nominal bore Each 8.00 568.58 4548.63
Providing and fixing unplasticised PVC connection pipe with brass
18.21.2 45 cm length
18.22 Providing and fixing C.P. shower rose with 15 to 20 mm inlet:
Painting GI pipes and fittings with synthetic enamel white paint with
18.38 two coatsover a ready mixed priming coat, both of approved quality
18.38.1 15mm diameter pipe Meter 9.32
18.38.2 20mm diameter pipe Meter 11.02
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
18.38.3 25mm diameter pipe Meter 14.52
18.38.4 32mm diameter pipe Meter 17.19
18.38.5 40mm diameter pipe Meter 20.39
Providing and fixing G.I. Union in G.I. pipe including cutting and
threading the pipe and making long screws etc. complete (new work)
18.46.1 15mm nominal bore Each 24.00 160.47 3851.38
18.46.5 40mm nominal bore Each 8.00 307.11 2456.88
Providing and placing on terrace (at all floor levels) polyethylene
water storage tank, ISI:12701 marked with cover and suitable
locking arrangement and making necessary holes for inlet, outlet and
overflow pipes but without fittings and the base support for tank.
Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931
Providing and fixing C.P. brass long nose bib cock of approved quality
conforming to IS standards and weighing not less than 810 gms.
Providing and fixing CP brass stop cock (consealed) of standard
design and of approved make conforming to IS:8931
Providing and fixing C.P. brass angle valve for basin mixer and
18.53 geyser points of approved quality conforming to IS:8931.a) 15 mm
Providing and fixing PTMT soap Dish Holder having length of 138mm,
18.65 breadth 102mm, height of 75mm with concealed fitting Each 48.00 160.18 7688.78
arrangements, weighing not less than 106 gms.
Providing, laying and jointing glazed stoneware pipes class SP-1 with
19.1 stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1
fine sand) including testing of joints etc. complete :
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse
19.2 sand : 10 graded stone aggregate 40 mm nominal size) all round
S.W. pipes including bed concrete as per standard design.
19.2.1 100mm diameter S.W. pipe Meter 92.80 436.02 40463.02
19.2.2 150mm diameter S.W. pipe Meter 234.90 533.21 125251.40
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water tight
19.4 C.I. cover with frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than 2.70
kg as per standard design :
19.4.2 150 x 100 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Constructing brick masonry manhole in cement mortar 1:4 (1
cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2
coarse sand 4 graded stone aggregate 20mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement and making channels in cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with a floating coat of neat
cement complete as per standard design.
Inside size 90 x 80 cm and 45 cm deep including CI cover with frame
(light duty) 455 x 610mm internal dimensions, total weight of cover
and frame to be not less than 38 kg (weight of cover 23 kg and
weight of frame 15 kg).
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
19.21 stone aggregate 20 mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement :3 coarse sand), finished
with a floating coat of neat cement and making necessary channels
for the drain etc. complete.
19.21.1 For pipes 100 to 250 mm diameter Each 8.00 313.47 2507.77
WATERPROOFING WORKS
Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C., kitchen and the
like consisting of (i) Ist course of applying cement slurry @ 4.4
Kg/sqm mixed with water proofing compound conforming to IS 2645
in recommended proportions including rounding off junction of
22.3 vertical and horizontal surface (ii) IInd course of 20 mm cement
plaster 1:3 (1cement: 3 coarse sand) mixed with water proofing
compound in recommended proportion including rounding off
junction of vertical and horizontal surface (iii) IIIrd course of
applying blown or residual bitumen applied
hot at 1.7 Kg. per sqm of area.
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of
PVC sheet should be 100 mm wide and pasted to each other with Sqm 471.41 393.27 185387.97
bitumen @ 1.7 Kg/sqm.
22.14 Grading roof for water proofing treatment with
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
Extra items already approved
13.80 providing and applying white putty Sqm 14,552.67 96.41 1402992.80
13.47.1 Finishing Wall with premium Sqm 9,968.01 102.11 1017864.97
9.118.1 24mm THICK PVC DOOR SHUTTER Sqm 151.20 2,924.06 442118.28
TOTAL OF CIVIL WORKS, (DSR ITEMS) SECTION-A
NON-SCHEDULE ITEMS
Providing, hoisting and fixing precast reinforced cement concrete
drain covers including finishing and plastering the exposed surface
with cement mortar 1:3 (1 cement : 3 fine sand) of thickness not
exceeding 6mm to give a smooth and even surface including
centring and shuttering etc. but excluding the cost of reinforcement
with 1:1½:3 (1 cement : 1½coarse sand : 3 graded stone aggregate
20mm nominal size) including making holes and providing lifting
hooks complete as per drawing.
Providing and fixing 25 mm thick mirror polished machine cut Kota
Stones for kitchen / pantry platforms, vanity counters, facias and
similar locations of required size and approved shade,colour &
texture with bull nosing, laid over 20mm thick base cement mortar
1:4 (1 cement : 4 coarse sand) , with joints treated with white
cement, mixed with matching pigment, epoxy touch ups , including
10 rubbing, curing, polishing etc. complete at all levels. (Area of slabs Sqm 81.24 1,187.14 96443.30
0.1 sqm to 2.0 sqm) The item shall also include fixing of Kota stone
in facia and drops of width upto 150mm with epoxy resin based
(Araldite or equivalent) adhesive including cleaning and providing
opening of required size and shape for wash basin / kitchen sink and
similar location including necessary holes for pillar taps etc. wherever
Providing and fixing heavy duty 25mm dia,2mm thick anodised
aluminium drapery rods of approved color and shade with
decorative end covers, matching brackets, etc.
complete.Manufacturer and Sample to be approved by EIC.
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Providing and fixing wardrobes shutters out of 18 mm thick both side
commercial veneered particle board conforming to IS: 3097, sealed
from all sides with Teak wood leaping 18x18 to shape at meeting
joint and 18x6 on remaining sides with 18mm wide designer teak
wood molding as per drawing to be fixed to 50x25 second class teak
wood frame with nickel plated bright finished MS piano hinge IS
3818 marked, with necessary screws. The frame shall be provided
19 with 19x6mm teak wood beading from all around of inner side to Sqm 346.14 2,711.98 938736.04
obtain 6x6mm grooved and 25x6mm TW beading on outside. The
frame shall be fixed to wall with hold fast on either side, centre to
centre distance not more than 600mm, making holes and grouting
the same with PCC (1:2:4 – 1 cement : 2 coarse sand : 4 graded
stone aggregate
12mm nominal size) including cutting to shape and making rebate.
The work shall include all necessary hardware, fixtures, two coats of
Providing and fixing shelves in wardrobes and showcases with
necessary supporting arrangement out of 18 mm thick veneered
partial board grade 1 conforming to IS: 3097, with commercial
veneering on both sides and exposed edges shall be sealed with
18x6mm thick leaping and shall be fixed on
25x50mm hardwood batons on three sides including applying
minimum two or more coats of white synthetic enamel paint over
wood primer to give even shade
Extra for providing built in multi purpose six levers drawer lock of
approved quality.
Providing & fixing 20mm dia 2.0mm thick anodised aluminium
hanger rod with coupling to cup board
Providing and fixing flash butt welded factory made steel glazed
window and ventilators of standard rolled steel sections as per
IS:1038, steel of ST-32-0 grade, conforming to IS:1977. joints
mitred and flash butt welded with 15x3mm lugs 10cm. Long with
steel lugs embedded in concrete blocks
15x10x10cm. of 1:2:4 (1cement : 2 coarse sand : 4 stone aggregate
of 20 nominal size) or rawl plugs or fixing clips or with bolts or nut as
required complete as per drawing
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Windows/Ventilators- side/top hung: to have double frame flush butt
welded together with 45x3mm. M.S. flat and double shutter. The
outer shutter shall be glazed with glass panes 4mm. thick with snap
type M.S. beading of approved shape and section, concealed, fixed
with zinc plated M.S. screws. The inner shutter shall be fixed with
wire mesh of IS guage designation 140G with wire of dia. 0.71mm.
15mmx3mm M.S. flats. Each shutter leaf shall have priming coat of
approved steel primer including the cost of metal beading, hinges,
pivot, handles 100mm, tower bolts 100x10mm etc. as required.
Friction hinges for glazed shutter and heavy duty box type hinges for
wire mesh shutters shall be provided.
Windows fixed type – with glass panes 4mm. thick fixed with snap
type M.S. beading of approved shape and section, with concealed
b zinc plated M.S. screws to the outer rebate of the frame formed by sqm 25.16 2,840.24 71460.54
flash but welding including applying priming coat of approved steel
primer, including cost of metal beading etc.
Making khurras 20 x 20 cm with 20 mm cement plaster 1:3 (1
64 cement : 3 coarse sand) and a coat of neat cement rounding the Each 192.00 18.32 3518.33
edges and making and finishing the outlet complete.
Providing and fixing 50 mm diameter and GI rain water spout 50 cm
65 long in cement mortar 1:4 (1 Each 16.00 366.48 5863.73
Cement : 4 Coarse sand)
Providing and fixing 24 gauge 8 mm size galvanised chicken wire
mesh of approved width at junctions of concrete and brick work and
other locations called for including necessary laps and U shape
galvanised wire nails complete.
Providing and fixing Ist quality 200/250/300mm wide(as per detail
drawing) ceramic glazed tiles band conforming to IS: 13753 of
minimum thickness 5mm of approved make like NITCO, ORIENT,
SOMANY KAJARIA, or equivalent make in all colours, shades, design
69 and prints of any size as approved by Engineer-in- Charge in wall/ Sqm 10.12 721.19 7298.42
parapet cladding at all height, over 12mm thick bed of Cement
Mortar 1:3 (1 Cement: 3 Coarse sand) and jointing with grey cement
slurry @ 3.3kg. per sqm including pointing in white cement mixed
with pigment of matching shade complete.
SANITARY FITTINGS
Providing and fixing stainless steel jali grating with or without hole
82 for waste pipe for floor/nahani trap in place of C.I. grating.- 100 mm Each 336.00 36.65 12314.17
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Providing and fixing C.P. brass towel rail with two C.P. brass brackets
83 of 600 x 20 mm size,fixed to wooden cleats with C.P. brass screws Each 48.00 412.29 19789.93
Providing and Fixing C.P. brass 150 mm dia towel ring fixed to
85 wall/door with wooden cleats and C.P. brass screws including cutting Each 48.00 366.48 17591.20
and making good the wall wherever required.
Constructing brick masonry open surface drain with bricks of class
designation 75 in cement mortar 1:4 (1 cement : 4 fine sand)
including earth excavation 10 cm thick bed concrete 1:5:10 (1
cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size) and 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 12.5 mm nominal size) for filling
haunches including 12 mm cement plaster 1:4 ( 1 cement : 4 coarse
sand) with a floating coat of neat cement inside the drain, its top and
exposed side including disposal of surplus earth complete as per
standard design.
b 15 cm drain 20 cm average depth-With FPS bricks Meter 449.68 628.25 282512.87
c 25 cm drain 30 cm average depth-With FPS bricks Meter
SCHEDULE-II:INTERNAL ELECTRIFICATION SECTION-A: NON
Wiring for primary* Light point / Ceiling fan point / Bracket Fan /
Exhaust fan point with 1.5 sq. mm. PVC insulated copper conductor
wire in recessed medium class PVC conduit, including supply and
erection of conduit, wires, accessories, modular switch board &
modular switch, earthing with
1.0sq.mm, PVC insulated copper wire, complete as required. (The
1 switchboard will be common / Points 896.00 840.00 752641.34
individual depending upon layout / requirement).
The Rate shall also include wiring for each circuit of Lighting Panel to
respective switch boards with 2.5 sq. mm PVC insulated copper wire
in recessed medium class PVC conduit and earthing with 1.0 sq.mm
PVC insulated copper wire of all switch boards/boxes.
Wiring for secondary* light point with 1.5 sq.mm. PVC insulated
copper conductor wires in recessed medium class PVC conduit,
2 including supply and erection of conduit, wires, accessories, switch Points 112.00 359.31 40242.38
board and switch, earthing with 1.0 sq.mm, PVC insulated copper
wire, complete as required.
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Wiring for 5 pin 5/6 A, plug point with 1.5 sq.mm. PVC insulated
copper conductor wires including providing 5 pin 5/6A modular
3 socket outlet with modular switch including switch board, earthing Points 384.00 271.91 104412.67
the 5th pin with 1.0sq.mm,PVC insulated copper wire etc. complete
as required. (on Separate switch board)
Wiring for 5 pin 5/6 A, plug point with 1.5 sq.mm. PVC insulated
copper conductor wires including providing 5 pin 5/6A modular
socket outlet with modular switch on existing switch board, earthing
5th pin with 1.0sq.mm,PVC insulated copper wire etc. complete as
required. (on same switch board)
Wiring for primary 5/15 A power plug point with 4 sq. mm. PVC
insulated, copper conductor, wires in recessed PVC conduit along
with 1 No. 1.5 sq.mm PVC insulated copper wire for loop earthing as
required including conduit wire and accessories.
Wiring for secondary circuit 5/15A power plug point for flats, with 2.5
sq. mm PVC insulated copper conductor single core wires in recessed
PVC conduit along with 1 No. 1.5 sq.mm PVC insulated copper wire
for loop earthing as required, including conduit, wire and accessories.
Supply & Erection of metal boxes in recess with suitable size with
modular plate and covered in front including providing and fixing of
6 pins 5/15A modular socket outlet and 15A modular switch,
connections painting etc. as required
Wiring for primary 20 A power plug point with 4 sq. mm. PVC
insulated, copper conductor, wires in recessed PVC conduit along
with 1 No. 1.5 sq.mm PVC insulated copper wire for loop earthing as
required including conduit wire and accessories.
Supply, installation, testing and commissioning of 20A, 240 volts SPN
industrial type socket outlet with
9 2 pole and earth metal enclosed plug top along with 20A SP MCB "C" Nos 96.00 1,557.64 149533.86
curve in sheet steel enclosure in recessed with chain metal cover for
socket outlet as required.
Wiring for two-way light points with 1.5 sq.mm PVC insulated copper
conductor in recessed PVC conduit complete including supply and
erection of conduit, wires, accessories, modular switch boards &
modular switchs, earthing with 1.5sq.mm, PVC insulated copper
conductor, complete as required. (The switchboard will be common /
individual depending upon layout/requirement
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Wiring for call bell with bell push button, point with 1.5 sq.mm PVC
insulated copper conductor wires in recessed PVC conduit, including
earthing with 1.5 sq.mm PVC insulated copper conductor wire with
modular switch as required.
Wiring for sub-main with 4x6 sq.mm PVC insulated copper conductor
cable in recessed PVC conduit complete as required including
earthing with 2 Nos. of 2.24 mm dia copper wire including conduit
wire and accessories.
METER BOARD:- (Supply, Erection, Testing & Commissioning) TPN
meter board complete as required with following:
1 No. of 100 A / 440 Volts TPN SFU
Meter cubicles (without meters)** - 07 Nos. With space for meter &
CT. OUTGOING: 32 Amp TPN MCB - 07 Nos.
3 Nos. indication lamps.
LIGHTING PANELS: Supply, Erection, Testing & Commissioning of
following:MCB type
TPN, lighting panels suitable for installation in recess comprising the
following: Incomer:1) 32 Amp. 415 Volts TPN, MCB Isolators
including Residual current circuit breaker (RCCB) with current
sensitivity of 30mA -01 No.
Aluminium Busbars: 32A, 415V, TPN -1set
Outgoings:1) 25 Amp. SP MCB - 01 Nos. 2)16Amp. SP MCB - 06
3) 6Amp. SP MCB - 09 Nos.
TELEPHONE & T.V. ANTENNA: Supply and fixing of PVC conduit of
following sizes
alongwith accessories, pull boxes etc. in recess complete as required
including cutting the wall and making good the same :
b 32 mm dia Mtrs
Supply and erection of MS box of suitable size for Telephone and TV
21 Antenna points, recess mounted with modular type as required. i.e. no 192.00 160.23 30764.45
Supply and erection of MS sheet steel 1.6 mm thick, painted metal
box in recess with 3 mm thick white bakelite laminated sheet cover
complete as required for Telephone and TV Antenna points and all
other fixing accessories required.200 x 150 x 100 mm deep.
Supply and erection of jack type RJ11 socket for telephone points
including connection etc. on existing metal box as required.
Supply and erection of T.V. Antenna socket on existing metal box as
EARTHING & LIGHTING PROTECTION:
Digitally signed by PRIYA
BILL OF QUANTITY (BOQ)
Balanced Rate at which
Item No. in Unit of
Quantity to be original tender
the DSR- Description of Item Measurem Amount As per BoQ.
executed at Risk was awarded
Supply, Installation, testing and commissioning of call bell / buzzer
58 on wall, including connections, complete as required, including NO 48.00 200.05 9602.24
providing all accessories required for fixing.
Supply and fixing of Ceiling fan with 1200mm sweep, double ball
bearing motor, capacitor, three MS blades die cast Al housing in
59 stove enameled white with electronic stepped type regulator, NO 192.00 2,372.40 455500.28
suspension rod & hook / hexagonal fan box and all accessories and
of reputed make including connections as required.
Supply and fixing of 200/225 mm sweep Exhaust fan suitable for
single phase, 230V, AC supply complete with motor, capacitor
61 louvers, mounting brackets, all accessories and of reputed make. NO 48.00 2,452.03 117697.32
Installation in the existing opening including making the hole to
suit the size of the above fan connections as required.
Supply and fixing of 300 mm sweep Exhaust fan suitable for single
phase, 230V, AC supply complete with motor, capacitor louvers,
62 mounting brackets, all accessories and of reputed make. Installation NO 48.00 3,769.81 180950.89
in the existing opening including making the hole to suit the size of
the above fan connections as required.
NOTE: * In case of more than one light point controlled by the
same switch, the wiring upto the
terminal block of the first light point including the switch
shall be considered as a primary point, loop wiring from light
to light shall be considered as secondary point.
Extra/Substituted Item in Electrical
Supply and fixing of 20 watt 4 feet long light fixture make: bajaj:
SI/37 BCLSB 20 WH, Phillips slimline 20 watt, Crompton-LDL-20-CDL watt NO 264.00
or approved make including connections as required.
Supply and fixing of 18 watt circular led surface light fixture make:
bajaj: BGSLO Sleek Surface 18W WH RD, Phillips Astra Surface 18
watt, Crompton-LCDSPLN-R-18-CDL or approved make, including
connections as required.
Supply and fixing of 9-10 watt 2 feet long LED Light fixture, Make
SI/47 BAJAJ: BCLSB 10 WH, Phillips-Astra Line 9 watt, Crompton-LDL-10- NO 144.00
CDL or approved make, including connections as required.
Supply and fixing 9-10 watt Bulkhead LED light fixture Make Bajaj:
SI/53 BIBWP 10W LED, Phillips-Endura LED Bulkhead, Crompton-LBHE-10- NO 64.00
CDL or approved make, including connections as required.
TOTAL AMOUNT 33048623.78
TOTAL AMOUNT 33048623.78
Digitally signed by PRIYA
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
1 NIT.pdf
Tender Document
2 SCC.pdf
Tender Document
4 Annexure IA.pdf
Tender Document
5 LIST OF APPROVED MAKE.pdf
Tender Document
6 PART A_SCOPE AND SPECIAL TECHNICAL REQUIREMENT.pdf
Tender Document
7 PART B GENERAL TECHNICAL SPECIFICATION.pdf
Tender Document
8 PART C SAMPLING TESTING QUALITY ASSURANCE REV.pdf
Tender Document
9 GCC 2013.pdf
Tender Document
10 GCC AMENDMENT 1 TO 5.pdf
Tender Document
11 TENDER DRAWINGS.pdf
Tender Document
3 BOQ.pdf
Tender Document
corrigendum-1564-Corri-1 69.pdf
pdf • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .