GENERAL RM 2024 25 RC 2 Phase 2 Zone 01 One year Running Contract of various PWD roads under Road Section Pulincunnu in Alappuzha District 6 road stretches for a length of 20.7 Km General Civil Work

Amount

Appendix A- Urgent patch works

2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.7.a:Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD226964/2024-2025:Mix seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of 20mm thickness compossed of 11.2mm to 0.9mm Type-A aggregate using penetration grade bitumen to required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 KN static roller and finishing to required level and grades as per Technical specification cluse 509 of MORD(Usage of bitumen is 22.00kg /(10m2) By Manual Means

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

55.6.a:Providing pre mix bitumen leveling coarse having thickness between 20mm and 40mm with 12mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen (vg 30) with pressure sprayer at the rate of 48 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.

4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method

55.22:Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.; complete.

12.8.B:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M20 (Without formwork)

OD114677/2024-2025:Removing old existing vinyl sticker works on the display board of running contract and replacing with new vinyl sticker including lettering, symbols and transporting to the site etc as per approved drawing and directions of Engineer

Appendix B- Premonsoon Works

10.2:Maintenance of Earthen Shoulder (filling with fresh soil) Making up the loss of material/ irregularities on the shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.

OD97918/2024-2025:Engaging wood cutter for cutting trees & branches leaned towards the road threatening to pedestrains & traffic

OD226838/2024-2025:Hiring charged of hand machine for cutting wood including fuel, rope and other sundries

OD97920/2024-2025:Engaging earth excavators , JCB or equivalent make for removing the Wood etc

OD97921/2024-2025:Engaging tipper for removing wood & material from road side as per the direction of departmental officers etc

OD97922/2024-2025:Engaging mazdoor for lowering side berms ,clearing side drains, removing silt from culverts, cutting earthern drain,Diverting blocked water ,assisting wood cutter in cutting dangerous trees branches of trees leaned towards the road threatening pedestrains & traffic & removal of fallen trees for branches on the roads, clearing traffic blockage ,stacking the wood in a suitable place & other various works as directed by the Engr in charge

OD97923/2024-2025:Engaging heavy load mazdoor for removing cover slab & resetting after cleaning etc.

OD97924/2024-2025:Filling up pot holes with bituminous ready mix compound (25kg Bag) and compacting and ramming to get a compact surface including of cost of material ,laying charges ,transportation to site etc complete rate is arrived for a bag of 25 kg

55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

Appendix C : Anticipatory Works

2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD227136/2024-2025:Mix seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of 20mm thickness compossed of 11.2mm to 0.9mm Type-A aggregate using penetration grade bitumen to required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 KN static roller and finishing to required level and grades as per Technical specification cluse 509 of MORD(Usage of bitumen is 22.00kg /(10m2) By Manual Means

4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

55.22:Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.; complete.

12.8.B:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M20 (Without formwork)

OD226897/2024-2025:Engaging labour with passenger car having less than 1000CC for conducting and reporting routine inspections for the entire length of the project road at frequency of 7 days through out the agreement period of the running contract as directed by the departmental officers at site.

Appendix D :- Preventing /Reviving affected area in Natural calamities

OD97925/2024-2025:Engaging mazdoor for lowering side berms ,clearing side drains, removing silt from culverts, cutting earthern drain,Diverting blocked water ,assisting wood cutter in cutting dangerous trees branches of trees leaned towards the road threatening pedestrains & traffic & removal of fallen trees for branches on the roads, clearing traffic blockage ,stacking the wood in a suitable place & other various works as directed by the Engr in charge

OD97926/2024-2025:Engaging wood cutter for cutting trees & branches leaned towards the road threatening to pedestrains & traffic

OD226906/2024-2025:Hiring charged of hand machine for cutting wood including fuel, rope and other sundries

OD97928/2024-2025:Engaging Earth excavators ,JCB or equivalent make for removing the Wood etc

OD97929/2024-2025:Engaging tipper for removing wood & material from road side as per the direction of departmental officers etc

8.45:Provision of metal drum/empty bitumen drum delineator, 300 mm in diameter, 800 mm high, filled with earth for stability, painted in circumferential strips of alternate black and white 100 mm wide fitted with reflectors 3 Nos of 7.5 cm dia, all as per IRC:SP:55-2001

Traffic safety

8.4.2:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 60 cm equilateral triangle

OD233048/2024-2025:Providing and fixing 600mm dia Convex mirror supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45cm X 45cm X 60cm. 60 cm below ground level including painting all exposed surface with 2 coats of epoxy primer and as per the direction of Engineer in charge.

A C KOSHY (BID ID -2093995)

Bidder Name

SAJIMON E B

A C KOSHY