Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC BALDAKHAL PASCHIM CHAMPAMURA AGARTALA WEST TRIPURA PIN 799008 | WEST TRIPURA | TRIPURA | 799008 | ₹9.3 L | L1 | Accepted-AOC Lowest Responsive Bidder |
| 2 | L2₹9.6 LRejected-AOC VILL HATICHARRA P O P S SIDHAI WEST TRIPURA PIN 799212 | SIDHAI | WEST TRIPURA | TRIPURA | 799212 | ₹9.6 L | L2 | Rejected-AOC High Rate |
Tender Value
₹9.6 L
EMD Value
₹19,105
Closing Date
21 Jan 2026, 3:00 pmClosed
THE EE WRD I KUNJABAN AGARTALA
O/O THE EE WRD I, KUNJABAN, AGARTALA, TRIPURA
Maintenance of MI scheme under Old Agartala RD block during the year 2025-26/SH_- Repair _ mtc. of pump-motor, suction-delivery _ electrical accessories etc. (Job No. TR/78/Minor Works/WRD-I/2025-26)
2026_CEWR_69148_1
96_EE_WRD_I_DNIET_2025_26
Open Tender
Civil Works
180 days
WEST TRIPURA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
₹19,105
19 Feb 2026
13 Jan 2026
21 Jan 2026
13 Jan 2026
21 Jan 2026
15 Jan 2026
Dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineer-in-Charge. i) For LI
Supply & fitting fixing ball bearing of approved quality for pump required during overhauling. i) 6306 Ball bearing (TATA /SKF)
Providing & fitting fixing Shaft sleeve bush of approved quality. i) For LI (Cast iron)
Providing & fitting fixing Shaft sleeve nut of approved quality. i) Cast iron
Providing & fitting fixing C.I. gland of approved quality. i) For LI
Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality. i) 150 mm dia
Providing & fitting fixing coupling nuts & bolts (all Size)of approved quality. i) For LI
Providing & fitting fixing coupling rubber bush (All Size) of approved quality, i) For LI
Providing & fitting fixing coupling star bush (All Size) of approved quality. i) 150 mm dia
Providing & fitting fixing Pump Shaft of approved quality.
Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-charge. i) 6 to 8 mm thick
ii) 10 to 12 mm thick
Providing & fitting fixing Casing ring of approved quality. i) 150 mm dia a) 10 mm thick
Supplying and fitting fixing of pump cooling pipe of best quality as per direciton of Engineer-in-charge.
Providing & fitting fixing Lantern Ring for pump of approved quality.
Supplying and greasing/applying of grease of approved quality as per direction of Engineer-in-charge.
Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. a) 150 mm dia
Providing & fitting fixing Shaft sleeve nut of approved quality. i) Cast iron
Providing & fitting fixing of G.I. flange ( 10 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in- charge. i) 150 mm dia
Providing & fitting fixing Gland nut / Stag nut 100 mm long for gland of approved quality. i) For LI
Providing and fitting fixing M.S. clamp for hose pipes with nuts & bolts complete as per relevant IS specification and direction of Engineer-in-charge. i) 150mm dia
Providing & fitting fixing Rubber flange washer 6 mm thick at site ofwork of approved quality.
Providing and fitting fixing MS Foot valve as per relevant IS specification and the direction of the Engineer-in-charge.. i) 150 mm dia
Providing & fitting fixing C.I tail piece of approved quality at site of work. i) 150 mm dia
Providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality. i) 150 mm dia
Providing & fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality. i) C.I foot valve weight
ii) C.I foot valve ring
iii) C.I foot valve net
Dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge.
Supplying & fitting fixing of spare parts for 20/25 HP Horizontal motor. i) Motor fan
ii) Terminal plate
Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415v, 25HP /18.50 kw Relay range within 17-25 ) in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for motor Pump Havells/L & T/BCH make direction of the Engineer-in-charge.
Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses). Triple pole with Neutral Link ( TPN ) , 415/500 Volt complete as per direction of the Engineer-in charge. i) 63 Amps
ii) 200 amps
Providing & fitting fixing PVC suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality. i) 150 mm dia
Providing & fixing 200 amps busbar of size 600x450x100 mm with 4 nos copper strip of size 450x40x4 mm of approved quality
Supplying and fitting fixing 7/16 PVC shethed copper wire with all electrical equipments in/c trial run etc. complete (ISI marked) on the panel board of approved.
Supplying and fitting fixing kit cut for main & sub main switch (Male & Female) as per direction of the Engineer in charge. i) 63 amps main switch
ii) 100 amps main switch
iii) 200 amps main switch
Supplying and fitting fixing of 3 pole power conductors of different type, range from 25-300 AC-3 suitable for Fully Automatic Star Delta type Motor startar L&T , BCH, Havells make as per direction of Engineer-in-Charge.
Supplying and fitting fixing of Thermal overload Relay, relay range 20-32, & 28-42, directly operated suitable for Fully Automatic Star Delta type Motor startar L&T ,BCH, Havells make as per direction of Engineer-in-Charge.
Supplying and fitting fixing of thermal timer type GT 200 ( 230/250 V, 360 V, 400/440 V, 500 V, 50 Hz for 5-18 secs range) suitable for Fully Automatic Star Delta type Motor startar L&T ,BCH, Havells make as per direction of Engineer-in-Charge.
Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as perspecification and direction of the Engineer-in-charge. a) 20HP
b) 25 HP-30HP
Labour charge of lifting of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block as per direction of the Engineer-in-charge.
Repair and maintenance of 15HP/ 17.5 HP Motor suitable for 7500GPH capacity submerssible pumpset by complete dismantling in/c providing fitting fixing of PVC (IS 8783-1978) insultyed electro grade copper (IS: 613-1984) conductor winding in stator & all necessary spare parts and ressembling the same in/c servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.
Labour charge for lowering & fifting fixing of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block and making necessary electrical connection with main switch /starter with motor in/c trial run for 10 hrs in two spell complete as per direction of the Engineer-in-charge.
Supplying & fitting fixing of spare parts for submersible pump 5 HP to 25 HP of approved quality as per direction of Engineer-in-Charge i) Motor bush (brass make)
ii) Thrust bearing with plate
iii) Pump bush
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_70360.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 3.76 MB
DNIeT_96_EE_2025-26.pdf
Tender Documents • 3.04 MB
BOQ_70360.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid