Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62,576Accepted-AOC ALAPPUZHA | ALAPPUZHA | KERALA | 686534 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹69,881+₹7,305 (11.7%)Rejected-AOC ALAPPUZHA | ALAPPUZHA | KERALA | 686534 | L2 | Rejected-AOC second Lowest |
Tender Value
Refer Docs
EMD Value
₹1,588
Closing Date
28 May 2026, 3:00 pmClosed
ASSISTANT EXECUTIVE ENGINEER,
O/o the Assistant Executive Engineer PWD Electrical Sub Division Idukki Painavu
PWD Rest House Kumily Maintenance-Maintenance to Electrical installation General Electrical Work
2026_PWD_852196_1
PWD/BLDG/TR/4180/2026_6_1_1/1
Open Tender
Electrical Works
Percentage
30 days
kumily
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
₹1,588
3 Jul 2026
21 May 2026
30 May 2026
21 May 2026
28 May 2026
21 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1MAINTENANCE | |||||
| 1.001 | OD342838/2025-2026:SITC of LED tube light on round block/Bracket 1200 mm LED (TMC100) lamps tube light fittings made of CRCA with 0.5mm thickness complete with all accessories and double side pin type single piece indoor LED Tube ,poly carbonate body (cool white at 6500 K temperature ) 1200 mm, G13 base 18 w with extruded aluminum heat sink with nominal system level lumen package of min 2100 Lumen having efficiency of minimum 115 lumen/watt, inbuilt Driver with THD <10%, power factor >0.95, RoHS compliant, suitable for use 140~280V AC 50 HZ AC supply. etc and extruded Aluminium heat sink etc . The light should have minimum 70% of light at 40000 Hr life time as per relevant NABL Accreditation certification(LM 70& 80). Fittings directly fixed on wall or ceiling with PVC round block neatly
painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections etc as required.( philips or equallant make ) | - | each | 1,300.9 | - |
| 1.002 | OD352662/2025-2026:Supply and fixing of 20 W LED tube in the existing CRCA sheet fitting etc as required. | - | each | 570.38 | - |
| 1.003 | OD352840/2025-2026:Supply Conveyance, installation, testing and commissioning of 6W LED bulk head
fittings suitable for surface and wall mounting output greater than 115 lumen/W 6500
K with IP 66 protection and IK09 protection with power factor greater than 0.95 at
full load, internal surge protection up to 4 KV,and corrosion proof LM6 grade
pressure die cast aluminum body & poly carbonate diffuser cover complete with
THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up
for use on 230 V AC supply. including fixing as required Philips endura or its
equivalent | - | each | 1,426.78 | - |
| 1.004 | OD369156/2025-2026:Supply and fixing B-22 Type 3 W LED warm white bulb , in Existing batten holder philips or equqllqnt make etc. as required. | - | each | 102.77 | - |
| 1.005 | OD352661/2025-2026:Supply and fixing 7 W LED bulb in the existing batten holder etc as required. | - | each | 139.93 | - |
| 1.006 | OD369148/2025-2026:Supply and fixing PVC Batten/Angle Holder with 9W LED bulb and aluminum shade and giving connection etc as required. | - | each | 297.82 | - |
| 1.007 | 90.15.4.1:Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | - | each | 2,422.85 | - |
| 1.008 | 1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm | - | metre | 237.1 | - |
| 1.009 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm | - | metre | 147.76 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1439957.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
BOQ_1439957.xls
BOQ • 0.35 MB
NIT.pdf
Tender Documents • 0.02 MB
SBD.pdf
Tender Documents • 1.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .