machinery and equipments for MMV Trade

Fitter Trade Tool and Equipments

ELECTRIC POWER STEERINGElectric Assisted Power Steering Comprising of minimum: - Steering Wheel - Steering Co lumn - Rack & Pinion Assembly - Signal Sensors - Electric Motor and Motor Control Module with compatible battery supply - Tie Rod, Tie Rod Ends & all other steering linkages - Brake Assembly with Wheels fitted on stand (all new parts steering assembly)

CAR JET WASHER Power Supply: 3 Phase - Minimum Motor Power: 5 HP - Minimum RPM: 2000 - Discharge Pressure: 10.0 -20 .0 MPa (1MPa: 10.2 kgf/cm2) - 3 Nos of Reciprocating Plungers with pressure regulator and gauge -3 - Max Water Discharge: 11.5-20 lpm 15 meter high pressure water hose with pressure adjustable brass nozzle. with 2 meter G.I. suction pipe. ISI certified company ,company name and speification engrabed on body

ELECTRIC SOLDERING IRON 25 WATTS 230 V High quality Solding Iron. Suitable for soldering light gauze wires, thin metals and hobby work.

ELECTRIC SOLDERING IRON 60 WATTS 230 V Advanced Heating element, High Quality Nickel-Copper plated Bit ,Strong Bakelite Handle for heat resistance Soldering iron .

GREASE GUN Material Mild steel (Heavy Duty ) ,capicity 450 cc , Piston Size 11/32,Lever Type.Taparia , Bosch

GREASE GUN HEAVY DUTY TROLLEY TYPE 10 KG CAPACITY , Trolly Type ,5 meter high pressure hose Fitted with accessories , high pressure Pneumatic operated pump 80 to 90 kg / cm square

GROWLER Armature Tester Growler ,Technical Specification: • Input voltage: 230V 50 hz • Input Current: 0.65 . Testable armature Dia: 75 mm to 150mm. • Output Voltage: 12V DC. Single phase ,adjustable jaw ,Testing Armature with ampere meter and testing probe

HAMMER BALL PEEN 0.75 KG with handle Wooden Handle , Drop forged from high grade carben steel , company name and specification engrabed on body ,ISI certified company.

HAMMER CHIPPING 0.25 KG Helical barrel spring handle.| shock-dampening spring handle Drop forged, heat treated steel.| made of tough, alloy steel construction

HAMMER COPPER WITH HANDLE 01 KG , Material Copper Titanium , Handle-Wooden strong handle , both face flat haded , Company name and specification engrabed on body . ISI certified company

HAMMER MALLET WITH HANDLE WITH HANDLE ,Material Rubber, Double-Faced Solid Rubber Head ,Strong Wood Handle , Company name and specification engrabed on body . ISI certified company

HAND VICE UP TO 37 MM JAW MATERIAL Tool steel , Company name and specification engrabed on body , .ISI Certified company.

HOLLOW PUNCH SET OF SEVEN PIECE6MM TO 15MM WITH METAL BOX , MATERIAL HIGH CARBEN STEEL, knurlend body isi certified company , Hardness - 58-62 HRC Company name and specification engrabed punch body , capable to punch on midium carben steel surface

INJECTOR MULTIHOLE Complete Multi hole type Injector Assembly (New injector set )

PINTLE NOZLE ,Complete Pintle type Injector Assembly (New injector set )

INJECTOR TESTING SET HAND TESTER Injector testing set (Hand tester): -Comprising of Injection pump with hand lever transparent fuel container with filter, Three way shut off valve with valve spindle to isolate the pressure gauge while operating hand lever at high speed. - High quality Pressure gauge Range: 0 - 400 BAR (0 - 40 MPa).

MAGNETO SPANNER SET WITH 8 SET Must be magenetic 6 mm to 21 mm , Open ends offset at 15° angle for confined working areas , 15° angle offset of box ends provides clearance over obstructions , Forged from highest quality alloy-steel , ISI CERTIFIED COMPANY

MAGNIFYING GLASS 80 MM ,Colour Golden And Rose Gold Color , Item Dimensions LxWxH 18 x 9 x 1.1 Centimeters , Magnification Strength 10 x

MULTIMETER DIGITAL True Rms Responding.Voltage: Dc: 600 Volts. Ac: 600 Volts.Dc Accuracy: ± 0.5% + 3 Digit Ac Accuracy: ± 1% + 3 Digit External Testing Certification CSA: CAT III 600V. Segurança: IEC 61010-1 / IEC 61010-2-033. Grau de proteção: IP42 - IEC 60529; EMC: IEC 61326-1 / CISPR 11: Grupo 1, Classe A Height 0.04 centimeters Included Components Meter Item Weight 550 grams Length 0.16 centimetersSpecial Features 10A ac/dc current measurement (20 A overload for 30-seconds max , Frequency and capacitance , Min/Max/Average to record signal fluctuations , CAT III 600 V safety rated Specification Met

500 ml CAPACITY ,Nozel in steel and chrome plated , Body of oil can is drawn from tin coated sheet heavy gauge and has powder coated finish. Oil cans Fitted in brass pump mechanism.The pump mechanism is fitted with two steel balls for large volume delivery each stroke.

AUTOMOTIVE OIL PUMP FOR DISMANTLING & ASSEMBLING This Automotive oil pump for dismantling and assembling. for dismantling and assembling is to be used with CRDI Engine (New in working condition )

OUTSIDE MICROMETER 0 TO 25 MM Made with inwar steel, invar steel , company name -ingraved on micrometer body ,Company ISI certifide,with calibration certificate,set with zero error

OUTSIDE MICROMETER 25 TO 50 Made with inwar steel, invar steel , company name and specification engraved on micrometer body ,Company ISI certifide,with calibration certificate,set with zero error

OUTSIDE MICROMETER 50 TO 75 MM Made with inwar steel, invar steel , company name and specification engraved on micrometer body ,Company ISI certifide,with calibration certificate,set with zero error

OUTSIDE MICROMETER 75 TO 100 MM Made with inwar steel, invar steel , company name -ingraved on micrometer body ,Company ISO certifide,with calibration certificate,set with zero error

PHILIPS SCREW DRIVER SET OF 5 PIECES(POZIDRIVANDTORX DRIVE) 100 MM TO 300 MM Magnetic screw driver , ratchet. Company name and specification engraved on body ,ISI CERTIFIED COMPANY

PISTON RING GROOVE CLEANER With three easy-to-set cutter wheels for quick cleaning of grooves.• Sharp steel cutter removes carbon and vanishes from piston ring grooves.• Size: Blade 1: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”. Blade 2: 2, 2.5, 3, 4, 4.5mm 1/4”. Blade 3: 1.2, 1.5, 1.8, 2.8, 5, 5.5mm.

PRICK PUNCH 15CM made with high carben steel , point angle 30 degree ,knurlend body isi certified company , Hardness - 58-62 HRC Company name and specification engrabed punch body , capable to punch on midium carben steel surface

SPANNER T. FLOCKS FOR SCREWING UPAND UP-SCREWING IN ACCESSIBLE 6 mm to 14 mm ,made from chromium-vanadium alloy tool steels ,Accurately hardened and tempered to withstand higher torque and enable high wear resistance ,

SPANNER, ADJUSTABLE 15 CM heavy duty Tool steel company name ingraved ON Body.ISI certified company

STAR TER MOTOR AXIAL TYPE1.Starter Motor : - Starter motor axial type - Compatible with Petrol/Diesel Engine (new starter motor)

STARTER MOTOR PREENGAGEMENTTYPE 2 .Starter Motor : - Starter motor Pre-engagement type - Compatible with Petrol/Diesel Engine New starter motor

STARTER MOTOR CO-AXIAL TYPE 3 - Starter motor Co-axial type - Compatible with Petrol/Diesel Engine New starter moter assy.

Steel measuring Tape 10 METER ISI Certified company

STRAIGHT EDGE GAUGE 2 FT. 2 FT. ISI certified company.company name and specification engrabed on body

STUD EXTRACTOR SET OF 3SET OF 3 material tool steel ISI certified company

STUD REMOVER WITH SOCKET HANDLE WITH HANDLE Made with High carben steel. company name and specification engrabed on body

SURFACE GAUGE WITH DIAL TEST INDICATOR PLUNGER TYPE 0.01 MM.ISI Certified compay .with calibration certificate ,company name and specification engrabed on body.

TACHOMETER (COUNTING TYPE) Tachometer (Counting type): - Type: Digital - Display: 5-digit Backlight LCD Display - Accuracy: 0.02% +/- 2 digits - Contact Measuring Range: 2-20000 RPM - Non-contact Measuring Range: 2-99999 RPM - Measuring Distance:50mm-600 mm -To be supplied with suitable power supply

TIMING LIGHTER Measurement and memory of advance, rpm, dwell in degrees, percentage and milliseconds, direct and peak voltage.Three digital displays for measurements on 2 or 4 stroke engines up to 2 sparks per rev, top plug coil and dis systems.Advance measurement on cars, motorcycles, marine and industrial engines up to 19. 999 rpm.Stroboscope function for rpm counter of any rotating device.Cables and rubber shockproof hoods.Shockproof clamp.12V power supply (24v optional).

UNIVERSAL PULLER FOR REMOVING PULLEYS, BEARINGSUsed for LMV/HMV Bearing and Pulley ISI certified company,company name and specification engrabed on body

V’ BLOCK 75 X 38 MM PAIR WITH CLAMPSIZE 75X38 MM ISI certified company ,company name and specification engrabed on body

VALVE LIFTER LMV /HMV ENGINE

VALVE SPRING COMPRESSOR UNIVERSAL LMV /HMV ENGINE

VICE GRIP PLIERS MATERIAL -Chrome vanedium,chrome vanadium jaws Body and jaw teeth are differentialy hardened to ensure good gripping, provided with wire cutter Item Dimensions LxWxH 27 x 6.5 x 4.5 Centimeters.ISI certified company .company name and specification engraved on plier body

AUTOMOTIVE WATER PUMP FOR DISMANTLING AND ASSEMBLING This Automotive Water pump for dismantling and assembling is to be used with CRDI Engine being procured 6 cylinder diesel ( new water pump )

BENCH VICEJaw size-12cm,Material Jaw Plate-Tool steel,Body-cast iron,ISI Certified company,Company name and specification engrabed on body.

W ORK BENCHSIZE -250 X 120 X 60 CM .TOP -Hard wooden , wooden thickness 2.5 inch, heavy duty angle size- 6x6 cm, angle thickness-6 mm.

WORKING MODEL OF AIR BRAKE ASSEMBLY The working Model of Air brake assembly consisting of minimum : - One front drum should be cut out show the working internally of drum and whole parts assembly fitted on the frame. - The front drum should run hand operated, - One rear drum assembly (without drum ) brake shoe with liner show working of the brake.- Air compressor - Air Dryer - Unloader valve - Foot valve - Booster - Air tank with safety valve - Control valve - Brake chamber - Foot brake - Hand brake - Brake Light/Stop Light should be functional - Air Pressure gauges should be provided for checking air tank air (all air brake parts must be new )

CARBURETOR – SOLEX, MIKUNY FOR DISMANTLING AND ASSEMBLING SOLEX, MIKUNY FOR DISMANTLING AND ASSEMBLING FOR PETROL ENGINE (2-stroke and 4-stroke) (New carburetor assy)

CUT SECTION MODEL OF MOCK LAYOUT OF A MOTOR CAR –ELECTRICAL SYSTEM WORKING MODEL The mock layout consisting of minimum : - Head Light Circuit - Horn Circuit - Tail Light Circuit - Side Indicators - Brake light Circuit - Ignition Circuit - Working of Self-starter - Charging Circuit (Motor Driven Alternator) - Front Lighting Panel - Dash Board Panel Ignition System ( sparks from plug to be shown with Distributor & battery) - Car Audio system - Power Window mechanism - Wiper Motor, Anti Theft Device Wiring , Circuit - Electric Power Steering Circuit - Immobilizer Circuit - Reverse Parking Assist (all circuit must be in colour code wiring)

CUT SECTION WORKING MODEL OF AUTOMATIC TRANSMISSION GEAR BOX Cut Section Working Model of Automatic Transmission: - Model made out of original fullsize gearbox - Model suitably sectioned to show the internal mechanism of forward and reverse speeds. Fitted on stand.5 speed automatic is a transmission consisting of 5 gears for forward and 1 gear for reverse with torque convertor in working condition

CUT SECTION WORKING MODEL OF CENTRIFUGAL CLUTCH ASSEMBLY Cut Section Working Model of Four-Wheeler Centrifugal Clutch Assembly: - The model should be made out of original parts such as clutch pulley, clutch liner, clutch plate, clutch spring, and Input shaft. to demonstrate the working of clutch assembly.Model should be operated by suitable electric motor (220V/50 Hz AC) with manually speed control for demonstration - Model should be suitably sectioned to demonstrate the internal construction details (New centrifugal clutch assembly)

DEMONSTRATION BOARD OF ELECTRONIC IGNITION SYSTEM, IGNITION COILDemonstration Board of Electronic Ignition System - The open demonstration- working unit consisting of minimum: - Ignition Switch - Electronic Ignition Coil - HT Wires - Distributor - Four Spark Plugs - Battery ,all parts must be new

DEMONSTRATION BOARD OF MPFI SYSTEM The Demonstration Board for Three Cylinder MPFI Engine consisting of minimum : - Injectors - Rail - Inlet manifolds - Throttle body - Distributor - ECU - Canister Purge Valve - Carbon Canister - Fuel Tank Module ,Supporting Sensors such as Lambda Sensor, Engine Speed sensor, Cam Position sensor, Oxygen sensor, Airflow sensor, MAP sensor etc. - Crank Pulley - Fuel Tank Module -AC to DC convertor shall be provided as an alternative to battery for power input , all parts must be new

DISK BRAKE IN WORKING CONDITION WITH CALIPER ASSEMBLY WITH ALL PARTS The Working Model of LMV disk brake assembly consisting of following minimum parts & practically demonstratable: - Brake disc Assembly - Calliper assembly - ABS Tandem Master Cylinder vaccum booster WITH VACCUM PUMP & Operating Mechanism - Brake Hoses with clour code, Oil Reservoir with Oil - Pedal, Wheel speed sensor with EBD Electronic control unit. front and rear wheels fitted with wheel and tyre (all parts must be new)

FRONT AXLE (RZEEPPA JOINT) WITH STAND FOR DISMANTLING AND ASSEMBLYFront axle (Rzeeppa Joint) of a Generic LMV of Engine Minimum 1000cc Capacity(petrol/Diesel)

SEMI FLOATING AXLE SEMI FLOATING AXLE : The assembly should be consisting of minium -semi floating axle -differential assy,brake assembly.fitted on stand

FULL FLOATING AXLE Full floating axle Assembly: The Assembly should be consisting of minimum: - Full floating axle - Differential assembly - Brake assembly(heavy vehicle new) fitted on heavy stand

FUNCTIONAL/EXPERIMENT MODEL OF DIFFERENT TYPE OF SENSORS Functional/experiment model of different type of sensors consisting of minimum: - Petrol injector - Inlet manifolds - Throttle body - Distributor - ECU - Canister Purge Valve - Carbon Canister - Fuel Tank Module Supporting Sensors such as Throttle Position Sensor, Manifold Absolute Pressure Sensor, Engine Coolant Temperature Sensor, Vehicle Speed Sensor, Oxygen Sensor, Crankshaft Position Sensor, Camshaft Position Sensor, Intake Air Temperature Sensor, Mass Air Flow Sensor, Knock Sensor etc. -AC to DC convertor shall be provided as an alternative to battery for power input

SYNCHRONOUS GEAR BOX WITH STAND FOR DISMANTLING AND ASSEMBLY GEARBOX WITH 5 FORWARD & 1 REVERSE GEAR '-This Synchronous Gear box with 5 Forward & 1 Reverse. Gear required of CRDI diesel Engine (New gear box)

TANDEM MASTER CYLINDER WITH BOOSTER The working Model should be made of following minimum parts : - Tandem Master Cylinder - Complete Vacuum Booster System consisting of suitable vacuum pump and other necessary parts.(New Tandem master cylinder and booster) fitted on stand

WORKING MODEL OF TORQUE CONVERTER Working model of torque converter of LMV:Driven by compatible Variable Speed Single Phase Motor to demonstrate the working of Torque Convertor fitted on stand

CUT SECTION WORKING MODEL OF DIAPHRAGM CLUTCH ASSEMBLY Cut Section Working Model of Diaphragm Clutch Assembly: - The model should be made out of original parts such as Flywheel, Pressure Plate Diaphragm type ,Clutch plate, fork clutch release bearing, input shaft etc. to demonstrate the working of clutch assembly. - By operating The pedal provided The operation can be demonstrated. - Model should be suitably sectioned to demonstrate the internal construction details fitted on stand .New clutch assembly

CUT SECTION WORKING MODEL OF SINGLE PLATE CLUTCH ASSEMBLY Cut Section Working Model of Single Plate Clutch Assembly: - The model should be made out of original parts such as Flywheel, Pressure Plate Finger type ,Clutch plate, fork clutch release bearing, input shaft etc. to demonstrate the working of clutch assembly.- By operating The pedal provided The operation can be demonstrated. - Model should be suitably sectioned to demonstrate the internal construction details

SPRING TENSION TESTER Spring tension tester:- Capable to test the spring up to upto 5" free length - Manually operated - Display : analog. - Capacity to test springs :100 Kg/CM2

AIR COMPRESSOR TWO STAGE HEAVY DUTY Capacity 500 ltr tank ,Compressor Technology Reciprocating Compressor ,Output Pressure 30 kg ,Brand ELGi Maximum Flow Rate 0-20 cfm , Power 15 -20 hp ,10 meter hose pipe with accessories, Automatic Tyre inflator Brand ELGi , BOCH .ISI certified company,company name and specification engrabed. calibration certificateOutput Pressure 30 kg Brand ELGi Maximum Flow Rate 0-20 cfmWarranty 1 YEAR Power 15 -20 hp

Rohit Uppal

ARISE TECHNOLOGY

APEX TECHNOLOGIES

Star Technology

ARISE TECHNOLOGY

APEX TECHNOLOGIES

Rohit Uppal