SPECIAL REPAIRS TO LATTICE MASTS AT SIGNAL SCHOOL AND CERTAIN SANCTIONED WORKS UNDER GE (NW) KOCHI AT NAVAL BASE KOCHI

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc.

Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for

Dismantling of single layer mangalore pattern roof tiles including ridges

Demolition of brickwork or stone masonry or PCC block masonry built in cement mortar

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling of battens for tiles, shingles etc, of any size including tilting fillets, spaced exc 15 cm all as specified

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work and all as directed.

Dismantling timber scantlings under 40 sq. cm in section, in fillets, rails, posts, rafters, purlins etc in unframed work and all as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc.not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in soft soil complete all as specified

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified

Removing excavated soil not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point all as specified

M & L hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for Providing, precast cement concrete 1:2:4, type B1, using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, shelves and similar articles with plain face window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, including chamfers weatherings, throating etc. and setting in mortar (1:6 ) complete with joints to match all as specified (Note : Reinforcement shall be measured and paid separately)

M&L for pre-cast cement concrete block masonry in Type C1, 1:3:6 (20mm graded aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified

M&L for pre-cast cement concrete block masonry in Type C1, 1:3:6 (20mm graded aggregate) with solid blocks, not exc 10 cm in width and setting in cement mortar 1:6 complete all as specified

M&L for RCC (1:2:4) type B1 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete all as specified

M&L for RCC (1:2:4) type B1 using 20 mm graded stone aggregate in beams, cantilevers, bressummers, lintels all as specified

M&L for Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation, pile caps and plinth beams; and similar work; vertical or to batter for rough finished flat all as specified

M & L formwork to sides and soffits of floor or roof beams, bressummers, lintels, shelves including supports for rough finished surface of concrete all as specified

M&L second class hard wood scantling, clean sawn, 40 Sqcm and over in section, in unframed work complete all as specified

S&F second class hard wood, sectional area exc 5 but n exc 15 Sqcm, clean swan battens at 30 cm centres, fixed in roof for fixing mangalore pattern tiles

S&F second class hard wood plain fillets, square or rectangular in section, clean sawn, secured with nails, bull nosed, splayed, chamfered or rounded on one edge or face area exc 13 but n exc 25 Sqcm in section

S&F second class hard wood weather boarding, clean sawn, plain, 20mm thick or feather edged 20mm thick and fixed with 30mm laps

Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc 1.50 sq. m each and making good the cill, jambs etc using cement mortar 1:6 all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.50 sq. m but not exc 4 Sqm each all as specified

M&L for 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified

M&L for 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats all as specified

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified.

M&L mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 10cm but not exc 15cm long and dia of neck 11 to 15mm complete all as specified

S&F for powder coated aluminium frame work for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc.complete all as specified (minimum thickness of powder coating 50 micron).

S&F powder coated (thickness of powder coating not less than 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275. complete all as specified

M&L for mangalore pattern roof tiles, interlocking at sides, joints laid dry complete all as specified

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base all as specified and directed .

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor all as specified and directed .

M&L for Machine cut kota stone slab flooring 20-25mm thick over and including CM 1:6, 20 mm thick screed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for hard wearing ceramic tiles, 10 mm thick (square / rectangular), light shade, area of each tile not exc 0.36 sqm, laid in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified (Make : VC shield series of SOMANY / Abrasion resistant series of Johnson)

M&L for rendering 10mm thick on brick work or concrete surfaces in 1:6 cement mortar finished even & smooth (without using extra cement.) all as specified and directed .

M&L for rendering 15mm thick on brick work or concrete surfaces in 1:4 cement mortar finished even & smooth (without using extra cement.) all as specified and directed .

M&L for Screed bed or bedding layer or mortar in CM (1:4), 15 mm thick for laying in floor finishes all as specified and directed .

M & L for preparation surfaces of new ceiling boards and application of two coats of oil bound distemper over a coat of chalk whiting complete all as specified

M & L two coats of cement based paint over a coat of alkali resistant primer on newly plastered wall surfaces including preparation of surfaces

M & L preparation of surfaces of wood and wood based materials, new or old of any description and girth not other wise described and treated with two coats of creosote all as specified

M&L for applying two coats of anti corrosive paint over a coat of metal primer including preparation on new steel surface exceeding 10 cm width or girth all as specified and as directed

S&F in repairs for vitreous china urinal, coloured, half stall type including all fitting all as specified.

S & F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified

S&F 150mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy all as specified

S&F 100mm mild steel butt hinges, medium weight, cold rold, all as specified

S&F 150mm long Aluminium anodised handle, cast type all as specified

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110 mm bore all as specified

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in plain cement concrete Type C2, 1:3:6 using 40mm graded aggregate for 150mm bore pipe complete all as specified

M&L for hume pipe septic tank 25 users capacity including AC vent pipe, earth work excavation in soft/loose soil, erecting hume pipe septic tank in position, PCC 1:3:6 and all other accessories required such as vent cowl etc and making good the disturbed surface and removing surplus soil and old u/s septic tank, complete incl connecting to the sewer line etc complete all as per drg No TD/2/86 sheet :1/1 dt 22.11.2000) .

M&L for Granite slab (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in steps, platform, counter an other simila work incluing screed bed or bedding layer of CM 1:4, 15mm thick, complete all as specified and directed.

M&L for 3mm thick wall care putty on newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing newly plastered external wall surfaces and applying two coats of weather proof paint (Apex Ultima or equivalent) over a coat of primer and a coat of sealent base coat as per manufacturer's instructions all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set & jointed in neat cement slurry & pointed in coloured cement to match, over and including CM 1:4, 15mm thick screed bed complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 300x 200x 7 mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in coloured cement to match, over and including CM 1:3, 10mm thick backing coat complete all as specified and as directed.

S&F powder coated (thickness of powder coating not less than 50 micron) aluminium 5mm dia hexagonal channel for grill fixed to aluminium frame with aluminium beading complete all as specified

S & F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including 6mm thick teak wood lipping on exposed edges complete all as specified

S&F 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework in ceiling as per manufacturer's instruction including anodised aluminium snap grid frame work of size of grid 605x605mm for false ceilingand GI hangers 6mm dia upto 1200mm length all as specified

M & L for preparation of new ceiling surfaces and applying one coat of oil bound distemper all as specified

S&F in repairs CP bib tap fancy type screwed down, screwed for iron pipes or brass ferrule including GI nipple and socket and fixed 15 mm bore all as specified and directed..(Cat No:G0204A1 of Parryware or equivalent approved make)

S&F water closet, vitreous china white, pedestal pattern (EWC), including white colour flat bottom seat cover and connection to drain and flush pipe and fixing bolts etc complete all as specified.(Cat No:C847H of Parryware or equivalent approved make)

S&F towel rack, stainless steel complete all as specified and directed.(Cat No:T6008A1 of Parryware or equivalent approved make)

S&F corner shelf with stainless steel railing complete all as specified and directed.(Cat No:T6010A1 of Parryware or equivalent approved make)

S&F in repairs decorative looking mirror of size 600x450mm complete all as specified and directed.(Cat No:C862899 of Parryware or equivalent approved make)

S&F mirror shelf with stainless steel railing complete all as specified and directed.(Cat No:T6009A1 of Parryware or equivalent approved make)

S&F soap dispenser including glass platform complete all as specified and directed.(Cat No:T6706A1 of Parryware or equivalent approved make)

S&Fcounter top basin (self rimming), vitreous china, of size 550x445x200mm complete all as specified and directed.(Cat No:C0431 of Parryware or equivalent approved make)

S&F pillar cock, fancy type, brass CP complete all as specified and directed.(Cat No:G0202A1 GF of Parryware or equivalent approved make)

S&F angle valve, fancy type, brass CP complete all as specified and directed.(Cat No:G0253A1 GF of Parryware or equivalent approved make)

S&F push cock of 15mm size, brass chromium plated, screwed down, screwed for iron pipe or brawss ferrule and fixed all as specified and directed.

S&F PTMT urinal spreader, 15mm size, of any colour, fixed with urinal including CP pipe all as specified and directed.

S&F rotational moulded polyethylene double layered water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres including provision of inlet, outlet, overflow and wash out connections complete all as specified and directed including taking down old one

S&F rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 5000 litres complete all as specified and directed.

S&F compound girders and stanchions, latice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffners, gusset plates etc (Fe-410-W (Gde-E-250) quality-B) and bolting the chequered plates to the frame etc complete all as specified and directed.

M&L for complete removal of paint from existing steel and iron surfaces exceeding 10 cm width or girth and applying two coats of anti corrossive paint over a coat of anti corrossive primer, all as specified and directed.

S&F 25x3.15 mm aluminium strip with saddles and screws etc including taking down old strip complete all as specified and directed.

S&F in repair air termination single pointed aluminium rod 12mm dia and 300 mm long including taking down old rod complete all as specified and directed.

S&F in repair test point terminal block made of gun metal of size 75x75x25mm drilled and screwed including all fixing arrangements with hexagonal screws including taking down old terminal block complete all as specified and directed.

M&L for submain wiring with 2 runs of 4 Sqmm PVC insulated unsheathered multi standrard copper conductor cable and one run of 4 Sqmm cable as earth continuity wire in and including PVC rigid conduit on wall/floor including taking down old wiring and making good the disturbed surface to match with exisitng surface all as specified. Note : (i) Three runs of 4 Sqmm PVC cable and one run of PVC conduit will be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

S&F integral aviation obstruction light fitting compricing of aluminium housing with polycarbonate inclouser including fixing arrangement and connection complete all as specified and directed of make Bajaj as per Cat Part No.BGAV 302 LED or equivalent make of Philips/Wipro including taking down of the old one.

S&F in repair cable tray MS/GI/Hot Dip/powder coated, perforated type, 16SWG, width 100mm with cover and all necessary fittings and fixtures including taking down old one complete all as specified and directed of make -Manibhadra or equivalent approved.

S&F welded galvanised steel wire fabric not exe 4kg per SqM to wood or steel members complete all as specified and directed.

S&F 4mm dia plain mild steel wire, galvanised class 3 in detached work such as for hanging of bird proofing net, mosquito nets and fixing to straining bolts, hooks, eyes etc complete all as specified and directed.

Material and labour for point wiring with 1. 5 Sqmm PVC insulated (FRLS) unsheathed multistranded single core copper conductor cable in and including rigid non metallic PVC concealed conduit of suitable size with all accessories and sunken box of 1.2mm thick pressed steel box, factory made for mounting of modular type switch, socket and fan regulator with modular plate covers including 1.5 Sqmm PVC insulated (FRLS) multistranded copper conductor earth continuity wire for one light/fan point controlled by one 5A switch including cutting chasing surface to conceal the conduit and making good the disturbed surface to match with existing surface all as specified and as directed by the Engineer-in-Charge. Note : Red/yellow/blue coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No 87 but for one 5 pin 5/6 amps socket outlet point on same board

All as per item No 87 but for one pin 5/6 amps socket outlet on independent board

All as per item No 87 but with 2.5 Sqmm copper conductor cable for one 6 pin 16 amps socket outlet point

Material and labour for point wiring with 1. 5 Sqmm PVC insulated (FRLSH) sheathed multistranded single core copper conductor cable in PVC casing and caping of suitable size and including 1.6mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylam top cover including 1.5 Sqmm PVC insulated (FRLSH) multistranded copper conductor earth continuity wire for one 5 Amps socket outlet point on independent board all as specified and as directed by the Engineer-in-Charge. Note : Red/yellow/blue coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No 91 above but with 2.5sqmm PVC insulated (FRLSH) sheathed multistranded single core copper conductor cable for one 15 amps socket outlet point on independent board

Supply and fix ceiling rose surface bakelite 65 x 50mm 3 terminals all as specified and as directed by the Engineer-in-Charge

S & F switch piano flush type 5 Amps SP one way all as specified

Supply and fix switch socket combination 6 pin, 16 Amp flush type universal all as specified and as directed by the Engineer-in-Charge

Supply and fix switch socket combination 5pin, 5 Amp flush type universal all as specified and as directed by the Engineer-in-Charge

S&F modular switch, one way ,6 amps ,one module, 230 Volts AC circuit complete all as specified and directed

S&F switch modular type 16 Amps, one way

S&F modular socket 6 pin 15 Amps flush type multi purpose 2 module all as specified

S&F modular socket 5 pin 6 Amps flush type, combined, 2 module all as specified

S & F modular type fan regulator, electronic step type, 120 Watts, 2 module complete all as specified and directed.

S & F sheet metal enclosure with socket plug top and MCB's single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified

S & F single pole and neutral sheet metal enclosure for DB 2 ways, single door, 240 V, IP 43 type, suitable for 200 Amps including taking down old DB complete all as specified and directed.

S & F single pole and neutral sheet metal enclosure for MCB DB 8 ways, double door, 240 V, with 200 Amps bus bar complete all as specified

M&L for submain wiring with 2 runs of 4 Sqmm PVC insulated unsheathered multi standrard copper conductor cable and one run of 4 Sqmm cable as earth continuity wire in and including PVC rigid conduit concealed in wall/floor including cutting chases and making good -the disturbed surface to match with exisitng surface all as specified. Note : (i) Three runs of 4 Sqmm PVC cable and one run of PVC conduit will be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for submain wiring with 2 runs of 4 Sqmm PVC insulated FRLSH unsheathered multi standrard copper conductor cable and one run of 4 Sqmm cable as earth continuity wire complete drawn in and including suitable size PVC casing and caping, surface type and its connected accessories complete all as specified. Note : (i) Three runs of 4 Sqmm PVC cable and one run of PVC casing and caping will be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for submain wiring with 4 runs of 10 Sqmm PVC insulated unsheathered multi standrard copper conductor cable and one run of 10 Sqmm cable as earth continuity wire in and including PVC rigid conduit concealed in wall/floor including cutting chases and making good -the disturbed surface to match with exisitng surface all as specified. Note : (i) Five runs of 10 Sqmm PVC cable and one run of PVC conduit will be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

S & F MCB DB SPN 12 ways, double door, 240 V complete all as specified and directed of make : L&T, cat part No DBSPN012DD or equivalent in other makes as specified

S & F MCB SPN 32 Amps, 240 V, 10 KA complete with all incoming/ outgoing connections with proper size lugs of Make Crabtree as per Cat No. DCMJCSNF006-032 or equivalent make of Legrand or L&T all as specified and directed

S & F MCB SPN 32 Amps, 240 V complete all as specified and directed

M & L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected to galvanised earth strip of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including earth work, excavation on any type soil and removal of surplus soil to a distance of 50 mtr, PCC 1:3:6 type C1 chamber, PCC 1:2:4 type B1 for earth pit cover reinforced with 6 Nos 8mm dia CTD bar, earth lead protection GI pipe medium grade 20mm size from earth plate electrode to main switch board all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point including taking out old earthing all as specified and directed including testing on completion

Ceiling fan 1200mm sweep copper wound having minimum 5 star rating , including fixing of down rod and connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 Sq mm from ceiling rose/ connector to fan complete all as specified. Make of ceiling fan : Havells, Cat No. ES-50, Premium 5 or equivalent in other makes as specified

S&F Exhaust fan 300 mm sweep 230 Volts AC 50 Hz, metalic body, 1400mm RPM including all fixing accessories complete of make Bajaj as per Cat No.70046 or equivalent make of Havells or Crompton including cutting walls and making good the surface to match with the existing all as specified and directed.

S&F Exhaust fan with louvers 380 mm sweep 230 Volts AC 50 Hz, metalic body, soundless type, 1400mm RPM including cutting hole in wall for fixing fan, including all fixing accessories complete of make Havells as per Cat Name Turbo Force or equivalent make of Bajaj or Crompton and making good the surface all as specified and directed.

S&F ventilating fan 250mm sweep, 230 volt, 50 Hz with fixing arragement as per make Ventil Air-DX of Havells or equivalent make of Bajaj or Crompton all as specified and directed.

S&F LED ceiling light 36 watt 230 volt including all suitable connection as per Cat Part No.LCPL-36-CDL(2X2) of Crompton or equivalent make of Luker, Wipro, Havells all as specified and directed.

S & F MCB TPN 50 Amps, 415 V, short circuit breaking capacity 10 KA complete all as specified and directed of make : Cat Part No DCMJCTNF050 of Crabtree or equivalent make of Legrand, L&T or Indoasian

S & F MCB SP 6 to 32 Amps, 240 V complete all as specified and directed of make : Crabtree Cat Part No DCMJCSPF006-032 or equivalent make of Legrand, L&T or Indoasian

Material and labour for point wiring with 2. 5 Sqmm PVC insulated (FRLS) sheathed multistranded single core copper conductor cable in PVC casing and caping of suitable size and including 2mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylam top cover including 2.5 Sqmm PVC insulated (FR) multistranded copper conductor earth continuity wire for one light/fan/bell point controlled by one switch all as specified and as directed by the Engineer-in-Charge. Note : Red/yellow/blue coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

M&L for submain wiring with 2 runs of 10 Sqmm PVC insulated unsheathered multi standrard copper conductor cable and one run of 10 Sqmm cable as earth continuity wire in PVC casing and caping all as specified. Note : (i) three runs of 10 Sqmm PVC cable and one run of PVC casing and caping will be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for cutting the PVC transparent sheet of minimum 2mm thick and fixing on existing ceiling light of any type/size to increase the glare of light fittings all as specified and directed.

Taking down steel/PVC tubing and connections ,15mm bore

Taking down steel/PVC tubing and connections ,20mm bore

S&F 15mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

All as per item No 124 above but 20mm bore

S & F CPVC ball valve 25mm for CPVC pipes complete all as specified

S & F CPVC ball valve 20mm for CPVC pipes complete all as specified

S&F rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres complete all as specified and directed.

Supply and fix on wall/concealed in wall, high pressure CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings of size 40 mm dia including all solvents complete all as specified and directed.

Supply and fix on wall/concealed in wall, high pressure CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings of size 25 mm dia including all solvents complete all as specified and directed.

Supply and fix on wall/concealed in wall, high pressure CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings of size 20 mm dia including all solvents complete all as specified and directed.

S&F PVC float valve of size 40mm dia, high pressure with polythene ball of size 6 inch dia and fly nut complete all as specified and directed.

S&F PVC float valve of size 25mm dia, high pressure with polythene ball of size 6 inch dia and fly nut complete all as specified and directed.

M&L for point wiring for one light or fan point controlled by one switch with 1.5 Sqmm (FRLSH) PVC insulated, unsheathed, multistranded single core copper conductor cable in PVC casing and caping including MS sheet terminal box (recessed) cover plate including 1.5 Sqmm PVC insulated copper conductor earth continuity conductor all as specified an directed.

ELLIKKAL ENTERPRISES

M.J.JOY AND COMPANY

SUKU CONSTRUCTIONS