15TH FINANCE COMM. -TIDE-2ND INSTALLMENT Grant (2023-24)

NAME OF WORK : Drilling of 250 mm dia x 250 mtrs deep Tubewell and Providing & Fixing Borewell

Machinery for Deesa Nagar Palika Area, Dist.-Banaskantha.Under 15TH FINANCE COMM. -TIDE-2ND

INSTALLMENT Grant.

Description Quantity Rate Per Amount

Drilling pilot borehole of size 250 mm at above site by mud flush

direct rotery rig.

Reaming of 250 mm dia. Pilot borehole to size 550 mm

1B dia.including assembling, lowering housing, casing strainerpiprs 250.00 371.68 Meter

with gravel packing and clayball packing etc.

Development of each water bearing zone coming across the full

depth of tubewell by lowering 100mm dia. Droplineand 32 mm.

GI airline for each zone with suitable capacity air compressor up

to avilability of sand free discharge.

1100 cfm/300 psi capacity air compressor upto the availability of

sand free discharge. (Mini.6 hrs.)

Supply of 250 mm dia ERW Blank pipes.Mini.7.10 mm

Manufacture,Supply and delivery of cage type wire wound low

2B carbon,Galvanized Screen Pipe (ii) Screen size 1.00 mm Heavy 50.00 3088.58 Meter

2C Screen size 1.50 mm Heavy duty. 50.00 2852.24 Meter

Clamps made from MS plate with 3 holes on either side with nuts

3A & bolts of standard make and suitable size. (1) 900 mm X 100 1.00 2037.91 No

mm X 16 mm flat suitable for 250 mm dia.Pipe.

Bore plug having 100 mm height made from M.S. plate with

holes at equal distance on circumference for nut-bolts

type,locking arrangement with nuts-bolts & lock nuts of std. Make

complete.Suitable for 250 mm dia pipe.

M.S. Bail plug having length 0.45 mtr from medium class pipe as

per I.S.S. suitable for 250 mm dia pipe.

Steel bent plate suitable to ERW pipe as detailed below 250 mm

dia 200 X 150 X

4 Supply of GRAVEL OF selected size 4 mm to 10 mm, 30.00 2049.29

5 Supply of clay balls having size of 15mm to 25mm, 30.00 758.51

6 Supply of portland cement, 1.50 6365.02 M Ton

Cement sealing as per recommended by Hydrologist without cost

of cement and by means of mudpump.

8 Electro logging of pilot bore hole(With carting) 1.00 18180.00 Job

Heavy duty, MS/ GI coloumn pipe both end threaded having

length approximate 3mt. Cofirming to IS: 1239 (Part- 1) with

coupling at one end and thread protector at other end.

Supplying at departmental store approved make electric motor

driven submersible pump set confirming to IS 8034/1981 and

10 motor confirming to IS 9283/1979 working at 3 phase 1.00 43370.41 No.

400/440 volt 50 C/S AC supply,255 Mt Head, 20 HP and

Description Quantity Rate Per Amount

Lowering / Lifting of 3 phase submersible pump set with MS / GI

column pipe into bore well inculding checking of therads of each

11 with coupling / welding & jointing cable with fuse unit box / control 1.00 2828.00 Job

panel board including fitting accessories by means of

mechanised derrick / chain pulley block including satisfactory

testing. B) Above 150 to 300 meter depth

Auto transformer starter suitable for local & remote pump control

application consisting of

Auto Transformer (vacuum impregnated, air cooled having three

(3) tappings at 50%, 65%

and 80%), incomer MCCB / MPCB, overload relay and

contactors as per Type II coordination

including digital MFM with RS 485 communication port, analogue

type ammeter with selector

switch, run hour meter, required protective relays & control

accessories.Control panel Board for Sub. pump Detailed

soecification as per GWSSB R/C. ATS Range A. T. S. from

PVC insulated flat submersible cable as per detailed technical

13 specifications of R/C of GWSSB conforming to IS 694, IEC 190.00 313.10 Mtr.

Supply, installation, testing & commissioning heavy duty APP

type capacitor unit, vacuum impregnated with non-PCB / non

14 toxic oil, internally delta connected with built in internal fuses 64.00 287.85 kVAR

complete with discharge resistances & terminal cover, rated for

440 V AC, 3 Phase, 50 Hz as per IS: 13585 Part-1.

Manufacture, supply and delivery of MS / GI specials plain and

socket end up to 300 mm dia

Earthing & Lightning Protection System:

S.I.T.C. of earth pit of minimum bore dia 150 mm size aproved

make Safe Earthing Electrode

consisting pipe-in pipe Technology made of corrosion free GI

Pipe having outer pipe dia of 50 mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising

connection terminal dia. of 12 mm with constant ohmic value

surrounded by highly conductive

compound with high charge dissipation suitable for following type

of applications.

For Electrical installation covering Motors/ Starters, LV MCC

Panel, PDB/ SDB & Lightning Protection

System i.e. independent earthing in normal soil with Length of

Pipe 3.00 mtr. & Back filling

compound - 2 No. Bag of 25Kg each.

Providing and Erecting required size of GI strip for earthing of

electrical equipment i.e. 11kV DP

16A structure, Transformers body, 11kV Switchgear, Starter/ Motors, 20.00 77.00 Kg

LV PMCC Panel, PDB/ LDB, Cable

Providing & erecting Hot dip Galvanisied strip/ iron wire 8 to

16B SWG for Aux. DB, Outdoor Lighting 200.00 77.00 kg

Poles & LPBS etc.

Description Quantity Rate Per Amount

Supply & laying GI perforated type cable trays with returned edge

/ flange, fabricated from 2.0 mm thk sheet steel in the standard

of 2.5 mtrs, duly hot dipped galvanized after fabrication as per IS

17 2629-1989 / IS 4759-1984 including accessories such as coupler 40.00 230.28 Rmt

plates/ fish plates, bends, tees, reducers, elbows, covers and

electro-galvanized hardware etc, erected on existing support as

per specification 100(W) x 35(H) x 2.0 mm Thick and instruction

of Engineer-in-charge.

Excavation for foundation upto 1.5 m depth including sorting out

18 and stacking of useful materials and disposing off the excavated 23.00 117.08 Cmt

stuff upto 50 Meter lead.(A) Loose or soft soil

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

Filling in foundation and plinth with murrum or selected soil in

20 layers of 20cm. Thickness including watering, ramming and 11.00 270.30 Cmt

consolidating etc. complete. (upto 10 Ton)

Providing and laying cement concrete 1:4:8 (1- Cement : 4-

Coarse sand : 8- crushed stone aggregates 40 mm nominal size)

and curing complete including cost of formwork in (A) Foundation

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level.

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

24 reinforcement for reinforced concrete work in © 2.00 4388.13 Cmt

Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level.

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

25 reinforcement for reinforced concrete work in © 2.00 4388.13 Cmt

Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level.

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

26 reinforcement for reinforced concrete work in © 0.45 4388.13 Cmt

Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level.

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

27 reinforcement for reinforced concrete work in © 0.11 4388.13 Cmt

Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level.

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

28 including bending, binding and placing in position complete upto 1113.00 76.21 Kg

floor two level

Description Quantity Rate Per Amount

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. Height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (A) Foundations

Footings Bases of Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (G) Columns

PillarsPosts and struts. (1) SquareRectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. height of propping and centering below supporting floor to

31 ceiling not exceeding 4 M. and removal of the same for in situ 6.23 197.25 Smt

reinforced concrete and plain concrete work in. (H) (1) Sides and

soffits of Beams Beam Haunchings cantilevers Girders

Bressumers andLintels not exceeding 1 M. in Depth.

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. Height of propping and centering below supporting floor to

32 ceiling not exceeding 4 M. and removal of the same for in situ 13.70 254.52 Smt

reinforced concrete and plain concrete work in. (B) Flat surfaces

such as soffits of supspened floors slabs Landings and the like.

(1) Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. height of propping and centering below supporting floor to

33 ceiling not exceeding 4 M. and removal of the same for in situ 3.59 260.88 Smt

reinforced concrete and plain concrete work in. (H) (2) Sides and

soffits of Beams Beam Haunchings cantilevers Girders

Bressumers and Lintels exceeding 1M.in Depth.

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. height of propping andcentering below supporting floor to

ceilingnot exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (L) Chullah

Hoods, weather shades Chhajjas Corbels etc. including edges.

Brick work using common brunt clay building bricks having

crushing strength not less than 35 kg./sq.cm. i foundation and

plinth in cement mortar 1:6 (1 cement : 6 fine sand)

Brick work using common burnt clay building bricks having

36 crushing strength 35 kg/sq.cm in superstructure for Ground floor 10.00 4320.08 Cmt

in C:M 1: 5 (1 cement : 5 fine sand)Conventional

Brick work using common burnt clay building bricks having

37 crushing strength 35 kg/sq.cm in superstructure from First Floor 2.00 4360.57 Cmt

in C:M 1: 5 (1 cement : 5 fine sand)

Description Quantity Rate Per Amount

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brickwalls for interior plastering

upto floor two leveand finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) in First Floor

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3- sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

43 even shade including throughly brushing the surface free from 51.00 79.22 Smt

mortar droppings and other foreign matter and sand papered

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

46 coarse sand) or L.M. 1.1.5 laid over and jointed with grey cement 6.00 1016.49 Smt

slurry including rubbing and polishing etc. complete. (B) 30 mm

Providing and laying broken chine mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid etc. as directed.

Description Quantity Rate Per Amount

Providing and supplying standard length ISI mark rigid

unplasticized PVC pipes suitable for potable water with ring fit

joint including cost of rings as per IS specification no 4985 /1988

including all local and central taxes and transportation freight

charges inspection charges , loading , unloading conveyance to

departmental store and including cost of jointing material etc.

kg/cm2 4) 110 mm (GWSSB SOR 2022-23 item no 3.1.B page

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

49 6131_paret-II Consentration Weight one percent is 12.00 82.72 Smt

recommended i.e one litre 20 EC chemical emulsion with 19 liter

give 1 % concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Providing and fixing M.S. grills of required pattern to wooden

frames of window etc. with M.S. flats at required spacing and

50 frame around square or round bars with round headed bolts and 72.00 101.17 Kg

nuts or by screws.

(A) Plain grill

Providing and fixing 35 mm thick shutters for Doors, windows

and clerestory windows including Indian teak wood frames 10 cm

51 x 7 cm. size including anodized alluminium fixtures and 3.00 5338.30 Smt

fastenings including primer coat of approved quality and two

coats of oil painting etc, complete. (ii) Fully Panelled.

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm

& earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino

Type ISI marked flush type switch / bell push and accessories

erected on Metal / PVC/Wooden Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.(a) with

medium class Rigid PVC pipe and accessories erected flushed

on wall/ceiling complete

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured

53 Aluminium cable 1.1 KV.grade to be erected as directed of 70.00 34.00 mtr

following size. (a) 2 core 2.5 Sq. mm

Total Amount Rs.

Total Amount Rs.