SPL REPAIRS TO BLDG NO P 26 SM BARRACK AND PROVN OF VIEW CUTTER NEAR BHAGAT ENCLAVE UNDER PALAMPUR MIL STN

M&L for preparation for removal of existing treatment, all loose gravel cement mortar, dirt, oil, grease and foreign material by jet of dry air, roughening and cleaning the surface mechanically or by grinding to make it smooth before application. Loose existing bituminous material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface. Repair all joints & cracks and apply primer with SmartCare Epoxy Primer to seal the pores/cracks and enhance the adhesion of the coating. Apply first coat Fiber reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 MPa and shall have cracks bridging ability up to 2.5 mm and shall resist 10 bars of hydrostatic pressure, reduce surface temperature up to 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3 mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry. Apply second undiluted coat @ 0.451 ltr/sqm. Apply third and final coat undiluted @ 0.451 ltr/sqm as specified and as per manufacturer's specification having warranty for 10 years.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all and removing debris outside premises complete all as specified and directed.

M&L 15 mm thick plastering in cement mortar 1:3 on brick surfaces or concrete surface as on Roof surface to maintain slope, finished even and smooth without using extra cement including mixing of wpc complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including a priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L 15 mm thick plastering in cement mortar 1:4 on brick surfaces or concrete surface, as on external surfaces, surface finished even and smooth without using extra cement including mixing of wpc including taking down cement plaster of any description and any thickness including grit finish on brick/stone/concrete surfaces complete all as specified and directed.

M&L for preparation of New plastered surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre /10 sqm over and including priming coat of exterior primer applied @ 0.90 litre /10 sqm complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M & L rendering 10mm thick in CM 1:6 on fair face of brick work or concrete surface of brick masonry, finished even and smooth without using extra cement including taking down complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Distemper Oil Emulsion over a coat of primer 1mm thick wall care putty to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of Old plastered surfaces of wall by complete removal of existing treatment and applying two coats of Distemper Oil Emulsion over a coat of primer and including 1 mm thick wall care putty to prepare the surface even and smooth complete all as specified and directed.