PROVN OF FIRE HYDRANT AND ALLIED WORK FOR CAME BLDG TECH AREA II AT DEAL UNDER GE(I) RND DEHRADUN

Amount

Supply & Fixing RRL hose pipe type 'B' 15 metre length complete all as specified & directed Make:- Safeguard/Life gauard/Omaxe super AXE

Supply & fixing fire hydrant valve single headed complete all as specified & directed.Make:- Zoloto/Leader/Kirloskar/L&T

Supply & fixing branch pipe gun metal 63mm instaneous inlet, made threaded outlet, 15mm bore nozzle short, complete all as specified & directed Make:- Safe gaurd/Omax or any ISI marke as approved by GE

Supply & fix hose box made of 18 gauge MS sheet having a minimum size 800mmx600mmx250mm and a maximum size of 1200mmx600mmx250mm with double door with 4mm thick glasses and door frame made of 16 gauge MS sheet painted fired out side and brilliant white inside yard complete all as specified & directed.

Supply & fixing Hose reel drum 30 metre lenth complete all as specified & directed Make:- Safeguard/Life gauard/Omaxe super AXE

Supply & fix water pressure gauge 4" dia range 0-14Kg per cm square, complete all as specified & directed.

Supply & fix metalic air vessel 250mm dia 1m height, complete all as specified & directed.

Supply & fixing sluice valve 100 mm dia with stainless steel spindle CI body class I ISI marked PN 1.6 both end flange and drilled and fixed by means of bolts, nuts and washers including providing rubber insertion of suitable thickness for 150mmmm dia size, complete all asspecified & directed.Make:-Leader/Zoloto/L&T/Kirloskar

Supply and laying in trenching MS pipe ERW including specials, nominal dia 100 mm dia size, complete all as directed and specified by Engineer in charge Make:- Jindal/Tata/Sail

Excavation in trenches in any type of soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. all as specified and directed by Engineer-in-Charge including removing cable protection covers/ bricks & stacking serviceable bricks for reuse and disposal of unserviceable covers within 50 m all as directed. Note : (i) Excavation shall be made carefully in order to avoid damage of existing cables and brick protection. (ii) The excavation work may be carried out in short lengths for locating fault in under ground cables at different locations

M&L for Returning, filling in including spreading, leveling, watering and well ramming in layers of 25 cm thick after the cables etc. are laid, jointed and tested complete all as specified and directed by Engineer-in-Charge.

M&L for Removal of surplus excavated soils not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge

Supply and fix Non Return Sluice Valve 100 mm dia bore complete all as specified and directed by Engineer-in-Charge

S&F 100 mm dia MS flanged joints gasket with rubber including U/S nut, bolts, washers complete all as specified and directed by Engineer-in-Charge

M&L for cutting to cast iron pipe of 150 mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge

S&F cast iron fittings flange and socketed / all socketed / all flanged type such as bend upto 150mm bore (any type radious and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs complete all as specified and directed by Engineer-in-Charge. ( Excavation earth work and run lead joints tighten joints rubber gasket shall be measured and paid seperately.)

M&L for construction of brick masonry valve pit of size 750 x 750x 750 mm inside including necessry excavation and earth work and disposal of surplus soil to 50 mtr brick work in cement mortar 1:4, MS angle iron frame, hold fasts, MS sheet cover 3 mm thick includind handle and locking aggangement all as specified and and shown on drawing.

M&L for rendering 10mm thick in CM (1:4) on fair faces of brick masonry including finishing the surfaces even and smooth without using extra cement complete, all as specified and directed by Engr-in-charge.

M&L for providing cement concrete 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as in copings, holdfast and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete, all as specified and directed by Engr-in-charge.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 mtr mean radius, old size brick built in Cement Mortar (1:4), for manholes complete, all as specified and directed by Engr-in-charge

Removal of demolished materials to a distance exceeding 250 mtr but not exceeding 500 mtr and depositing where directed at a level n.exceeding 1.5 mtr above the stating point complete all as specified and directed by Engr-in-charge

Demolition of brick or stone boulder masonary in cement motor or cement lime motor including all quions areches piller atc but excluding ashlar faring dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-charge

Friends fire Engineers

venus engineers