SPECIAL REPAIR TO BLDG NO T-10 AND 14 BK FOR CONVERSION IN R/O CRISIS EXPANSION WARD AT MH ROORKEE UNDER GE ROORKEE

Amount

Demolition of Brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work in CM (1:6) using Sub class ‘B’ Bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for brick work in CM (1:4) using Sub class ‘B’ Bricks straight or curved on plan any radius in half brick complete all as specified and directed .

Demolition of cement concrete (un-reinforced) of any description and laid in any position complete all as specified and directed.

M&L 75mm thick Cement concrete type B-2, (1:4:8) (40mm graded aggregate) as in sub base etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Vitrified Ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic colour joint free tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in floor, hard standing, plinth protection etc 75 mm thick finished even and smooth without using extra cement laid in alternate bays n'exc 2.50 Sqm and joints filled with mastic filling complete all as specified and directed

Demolition of RCC of any description and in any position complete all as specified and directed.

M&L for precast cement concrete type B-1 (1:2:4) in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain faces, with plain fair faces, including chamfers, weathering, throating etc and setting in mortar complete with joints to match set in CM (1:6) complete all as specified and directed.

Providing precast cement concrete type B-1 (1:2:4) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match set in CM (1:6) complete all as specified and directed.

M&L for granite 14-16 mm thick (table rubbed and polished) in floor/platform cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding of front side if required complete all as specified and directed.

M&L Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Udaipur green marble 12-14 mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding of front side if required, including cutting chasing if required complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed

Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed

M&L GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, incl cutting chasing in wall for concealing of pipe if required complete all as specified and directed.

M & L GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified complete and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not xc 10 cm girth complete all as specified and directed

Dismantling of water tanks 1000 ltrs of capacity and removing to store complete all as specified and directed.

M&L 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve hoisted and fixed in position all as specified in SSR Part I.

S&F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S&F in repair wall mixer with provn of over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed.

S&F in repairs stop/angle cock long body ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repairs chromium plated brass stop cock fancy type (Concealed Stop Cock incl exposed Part of Concealed Stop Cock) screwed both ends high pressure for 15 mm bore size iron pipe or ferrule complete all as specified and directed.

S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs CP brass shower rose 125 mm size suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, flush pipe,aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed.

S&F in repair vitreous china counter wash basin ,white,Oval type, size 550x400mm, excluding taps, chain and plug and porcelain stopper but including waste coupling, waste pipe complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed.

S&F in repair WC plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) long pan including connection to trap and to flushing pipe, anti-syphonage pipe etc incl making good to floor fixed in repair size 580x440mm white glazed with intergral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed.

S&F in repair Health Faucet 8 mm dia 1.2 mtr long flexible tube & wall hook complete all as specified and directed .

S&F in repairs CP toilet paper holder complete all as specified and directed.

S&F in repairs towel rail 600 mm long 20 mm dia chromium plated fixed to wall with CP steel screws etc, complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed .

S&F in repairs of 25 mm dia steel complete fancy type curtain rod with and including steel type brackets, stops, of suitable size & side caps etc. complete all as specified and directed.

S&F in repairs Vitreous China half stall urinal (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including CP urinal spreader,waste pipe complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including taking down complete all as specified and directed.

S&F in repairs PVC (SWR) bends / elbow 75 mm complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including taking down complete all as specified and directed.

S&F in repairs PVC (SWR) 'T' 110 mm equal or unequal complete all as specified and directed.

S&F in repairs PVC (SWR) bends / elbow 110 mm complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl 75 mm complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame for wooden/ steel window) not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed.

S&F Factory made single extruded WPC (Wood) Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunkS.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed.

S&F Stainless steel of AISI-304 grade barrel tower bolt 150 mm long, extruded section complete all as specified and directed.

S&F Stainless steel of AISI-304 grade handles, fabricated type, anodised of size 150mm size long complete all as specified and directed.

M&L powder coated Anodised aluminium frame for doors, windows, ventilators, partition walls etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F, Powder Coated aluminium door shutters, having top rail of size 83.50x44.45x1.87mm, middle rail of size 83.50x44.50x2.11mm, bottom rail of size 101.60x44.50x2.50mm and side vertical rail of size 85.00x44.45x1.80mm aluminum section including necessary joining cleats, glazing clips, rubber neoprene packing, 2 Nos powder coated handles 200mm long in each door, 250mm long powder coated tower bolt, hinges if required, anodised aluminium snap beading screws, mortice lock etc complete all as specified and directed.

M&L for powder coated aluminium anodised window sliding type (3 shutters type), aluminium sections weighing 0.55 Kg/m(min) including stainless steel wire mesh, necessary joining cleats, glazing clips, rubber packing, powder coated anodised aluminium snap beading, screws suitable anodised fittings such as handles, self closing latch, bush including powder coated anodised aluminium frame with one or more rebates with powder coated aluminium grill 2"x2" aperture including S&F 5 mm thick plain glass complete all as specified and directed

M&L for powder coated (50 micron thick) aluminium ventilator fixed type (partly glazed and partly gauzed) with gasket, glazing clip, glass etc, weight of frame not less than 0.55 Kg/RM and weight of shutter frame not less than 0.425 Kg/RM complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S&F sheet glass 5.5 mm thick ordinary quality and glazing with neoprene beading to aluminium frame complete exc 0.5 sqm in each pane complete all as specified and directed.

S&F for factory made Pre laminated/plain/PVC shutter of 9mm (+-0.7) thickness consisting of panel of 9 mm (+-0.7) thick celuka ply of density 600 Kg/Cbm manufactured by an ISO-9000 certified company using for back side shutter celuka ply 9 mm (+-0.7) thick cut in desired size of shutter and fixed with the frame of kitchen accessory etc complete as direction of GE, manufacturer's specification and drawing complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,Overall length of cover plate 140 mm, fixed in floor complete all as specified and directed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

M & L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of asbestos (corrugated, semi-corrugated etc) sheets in roof covering complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including make and good of dismantled portion of wall, complete all as specified and directed

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specifies and as directed.

Providing and fixing tiled false ceiling of designer tiles (high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design (Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel/truss with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, all complete at all heights as per directions of EIC including removal of existing false ceiling.

S&F in repair stainless steel soap dish complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for providing 15 mm thick rendering with cement mortar (1:6) finished even and smooth (without using extra cement) complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar (1:4) over a layer of 10mm thick rendering in cement mortar (1:6) on fair face of brick work/ concrete surfaces of wall with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separatly)

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and a coat of wall primer and two coats of oil bound distemper (White or tinted) complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and two coats of oil bound distemper (White or tinted) complete all as specified and directed.

M&L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over framed work in section, in any position complete all as specified and directed

M&L MS Roof trusses (framed), trussed, purlins, crane gantries, rails, bolts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections/ any hallow section) including distance pieces, base plate, base plate nut/ bolts, cleats etc Fe 410-W (GdeE- 250) quality A complete all as specified and directed.

M&L for preparation of newly steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment complete all as specified and directed.

Supply and laying sand (25 mm thickness) for cushioning to interlocking paver block complete all as specified and directed.

M&L for providing cement concrete type B-1, (1:2:4) (20 mm graded aggregate) as in sides of PCC tiles/ interloking tiles, bed blocks, for hold fast and similar work complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed

M&L PCC(1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation of manholes, filling and mass concrete etc complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregrate) as in bed to 150mm internal dia SGSW drain pipes including packing under and haunching against sides of pipes after they are laid and tested complete all as specified and directed.

M&L for brick work with old size sub class ‘B’ bricks in cement mortar (1:4), straight or curved on plan exc 6m mean radius built complete all as specified and directed

M&L for rendering 15mm thick in cement mortar (1:3) mixed with water proofing liquid on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for SGSW drain pipe of 150 mm internal dia, grade `A', laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in cills, coping, bed plates, bed blocks for hold fasts, apex stones and the like with plain fair faces including weathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed.

S&F mild steel TMT reinforcement bars 6 mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Returning filling in with excavated soil including spreading, leveling, watering & well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Dismantling and taking down carefully U/S copper aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Dismantling and taking down carefully sub-main wiring/ service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and directed.

Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and directed

M&L for new point wiring with PVC insulated PVC unsheathed electric (FRLS-H) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS-H) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes with hylam sheet cover glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:3) with all necessary surface finishes such as distempering etc to match the existing surfaces complete all as specified for the following:-

One light/fan/bell/exhaust point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .

All as per item No 101 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS-H but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS-H cable as earthwire complete all specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way, 230 volts, 50 hz complete all as specified & directed.

S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz all as specified and directed

S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

S&F electronic fan regulator, stepped type compatible for BLDC ceiling fan complete all as specified and directed.

M&L for Ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps, 250 volts AC ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed.

Supply and fix single pole & neutral plastic enclosure prewired power unit with 25 Amp rated MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

S&F LED tube light batten 20 watts 4 fts extruded aluminuim housing, translucent diffuser with LED light source, with lumen output not less than 110 lumen/watt, natural white, surge protection range-2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

Supply and fix surface/recessed mounted LED panel light 2'x2' size, 36 watts, full white/warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP/Amstrong/grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

S&F Decorative ultra slim round profile LED Tube light fitiing with extruded aluminium housing, energy efficient for mirror light 9/10 Watt 2 ft with LED light source with uniform light output, fixed on site with all accessories all as specified & directed.

Supply and fix central call bell indicator system comprising of indicator with bed number for 10 Nos of bed complete all as specified and directed.

Supply and fix LED 25 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver, including bracket clamp and fixing accessories complete with electronic driver and all accessories. The fitting shall IP 66 protection, duly prewired complete all as specified and directed.

Supply and fixing sub main wiring two single core 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 1.5 Sq mm PVC insulated unsheathed copper conductor cable (FRLS-H) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and directed

Ditto all as per item No 118.00 but size 4 sq mm

Ditto all as per item No 118.00 but size 6.0 Sqmm

S&F BLDC Ceiling fan complete with three aluminium blades down rod, accessories 230 V, 1200mm sweep, BEE 5 star rated, power consumption not more than 28 watt white in colour with squirrel cage induction motor complete all as specified and directed. Note: Old Ceiling fan to be deposited in MES store Yard

M&L for clamp made out of flat iron of size 50 mm x 5mm suitable for fitting on 40 mm GI pipe for hanging of ceiling fan complete with nut bolts washer etc complete all as specified and directed

Supply and fix GI tubing medium grade ISI marked of 40 mm bore dia includingg grouting it on wall for fixing of ceiling fan complete all as specified and directed.

S&F in replacemment exhaust fan PVC body 250mm sweep 900 RPM with louvers 240 volt single phase including making hole as per exhaust size on brick wall and making good the disturbed surface by plaster as per existing surrounding complete all as specified and directed. Note: Old exhaust fan to be deposited in MES store yard

S&F in replacement and testing TP&N vertical load line (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DBs with copper bus bar not less than 160 Amp for each phase with neutral bar & earthbar and cable lies for cable management for provision of MCCB 100 Amps ICs= 100% ICu, 16 KA four pole as incomer including connecting terminal strip complete and SP MCBs as outgoing complete pre-wired with suitable size copper conductor including taking out old unservicable DB and removing from site and making good of disturbed surface complete all as speciifed and directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar with separate earth and neutral link bar complete all as specified and directed.

Supply & fixing MCB , SP, AC, 240 volts of 06 to 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply and fix in replacement of MCCB 100 Amp, 16 KA, four Pole Ics=100%Icu, 415V, 50 Hz including taking down existing unserviceable MCCB of any description complete all as specified and directed. Note: MCCB should be of same make as of VTPN 4 way

Supply and fix electric water heater with temp control regulator type, storage type ABS body with glass line stainless steel inner tank with PUF insulation and heating element upto 1.5/ 2 KW capacity 25 litre, BEE 5 Star rated, ISI Marked, 240 V, 50 Hz complete with all accessories such as safety valve, thermostate, NRV, Plug Top, Hot and cold water connection pipe complete all as specified and directed.

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron, UL listed, CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit(resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7. The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS-H insulated copper conductor of size 6 sqmm, single core cable drawn through and including light grade GI pipe of size 15 mm upto 7 mtr incl cutting and chases on wall and floor and aking good using PCC complete all as specified and directed. Note : On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (b) Rate quoted by contractor is inclusive of excation work for earthing and refilling the excavated soil around earth pit.

Dismantling & taking out old unserviceable LT UG cable & Supplying & laying in replacement of LT UG cable (Conforming to IS 1554) ISI marked 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor in trenches/ducts/through HDPE pipe under roads of size 50 sqmm 3.5 core and making connections on pole/VTPN DBs using suitable size aluminium lugs complete all as specifed and directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls/pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

Cutting existing steel tubing of size 50 mm for addition or alteration for water connection complete all as specified and directed.

Screwing existing steel tubing of size 50 mm for alterations or additions (or lengthening screw on pipe to form connector) and inserting Tee of size 50x25 mm or 50 x20 mm as per site requirement complete all as specified and directed.

Supply and Fix Gun metal gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe, fixed in repairs complete of size 20 mm bore complete all as specified and directed

AJAY KUMAR CONTRACTOR (BID ID -3198088)

G.H. INFRASTRUCTURE PRIVATE LIMITED (BID ID -3204961)

IRFANAHMAD CONTRACTOR (BID ID -3198040)

Alankar Traders (BID ID -3205324)

ACE BUILDERS AND CONTRACTORS (BID ID -3199983)

M/s Sagar Associates (BID ID -3200164)

RAJENDER CONSTRUCTION CO (BID ID -3200622)