Special Repairs to Taluka Sub jail at RAPAR, Dist. Kutch. (Including Electrical Work)(Revised) (SBD) (4th Attempt)

Name of Work :- Special Repairs to Taluka Sub jail at RAPAR, Dist. Kutch. (Including Electrical Work)

Statement showing the approximate quantities for the items of the above work to be carried out and

Total Cost put to tender for Rs.=

It. Description of Item Total Unit Estimate Quoted Rate in Total Amount Rs.

It. Description of Item Total Unit Estimate Quoted Rate in Total Amount Rs.

No Quantity Rate Rs. in words

(A) CIVIL WORK:

Dismentling doors, windows, ventilators etc. (wood or steel)shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and Rupees One Hundred

1 stacking them within all lead and lift.(ii) upto 3 Sq.M. in area. 6.00 Each 190.19 Ninety and Paisa

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

R.C.C member including stacking of serviceable material and disposal of Rupees Nineteen and

unserviceable from site of work with all lead and lift. Paisa Sixty Nine Only

Removing dry or oil bound distemper by a washing and scraping and sand

Rupees Eleven and Paisa

3 papering the wall surface smooth including necessary repairs to scratches 1089.00 Sqm 11.42

Fourty Two Only

Credit Value for Door Shutter, Cupboard shutter and removed from site and Rupees Minus Two

4 clean site. 18.00 Sqm -250.00 -4500.00

Hundred Fifty Only

Excavation for foundation upto 1.5 m depth includingsorting out and stacking of

Rupees One Hundred Fifty

useful materials and disposingoff the excavated stuff upto 50 Meter lead.(B)

5 98.00 Cum 155.77 Five and Paisa Seventy

Dense & Hard Seven Only

Providing and laying cement concrete 1:4:8 (1- Cement : 4-coarse sand : 8- M/C Rupees Two Thousand

stone aggregates 40 mmnominal size) and curing complete excluding cost of Seven Hundred Fourty Two

formworkin (A) Foundation and Plinth and Paisa Twenty Seven

BRICK WORK using common burnt clay building bricks having crushing strength

not less than 35 Kg./Sq. cm. in cement mortar 1 : 6 ( 1 cement : 6 coarse sand ( Rupees Four Thousand

7 12.00 Cum 4451.53 Four Hundred Fifty One and

Conventional Bricks ), Brick with frog only shall be used at Ground floor

Paisa Fifty Three Only

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete

Rupees Two Hundred

wall for interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement :

8 200.00 Sqm 209.72 Nine and Paisa Seventy

4 sand ) including finishing with floating coat of neat cement slurry at GROUND Two Only

Providing 20mm thick SAND FACED cement plaster on walls above ground level

consisting 12mm thick backing coat of C:M 1:3 (1 cement; 3 sand) and 8mm Rupees Three Hundred

9 thick finishing coat of C:M 1:1 (1 cement; 1 sand) etc. complete for 113.00 Sqm 312.56 Twelve and Paisa Fifty Six

G+3height.(GutKa Plaster) . Only

Provinding and fixing WELD MESH JALLI of 0.25mm and 0.25mm wide with

Rupees Two Hundred

10 necessary screws and nail at joints cracks of brick work R.C.C work as per 31.00 Sqm 203.50

Three and Paisa Fifty Only

drawing and specification and direction of Engineer incharge.

Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern

fabricated from M.S. flat,square bars, round bars,c-channel, box pipe as per

detail Drawings. Rate is inclusive of welding with grinding smooth surface, two

Rupees Seventy Five and

11 coats of Oil paint and one coat of yellow Zinc Chromate primer coat of approved 1123.00 Kg. 75.10

brand only. Oil paint shall be Luxol Enamel paint of Berger Paint india limited. or

asian paint apcolite premium gloss Enamel of asian paint or Dulux premium

gloss enamel of dulux paint only

Celling painting (two coats) with plastic emulsion paint on undecorated wall

surface to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth With Rupees One Hundred

12 Applying two coats of Fine Putty & One coats of primer on new wall surface to 230.00 Sqm 191.73 Ninety One and Paisa

give an even shade including thoroughly brushing the surface free from mortar Seventy Three Only

dropping and other foreign matter and sand papered smooth. paint, primer and

putty shall be as per approved make list of GSPHCL

Wall painting (two coats) with plastic emulsion paint on undecorated wall

surface to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth With Rupees One Hundred

13 Applying two coats of Fine Putty One Coat of Primer on new wall surface to give 507.00 Sqm 181.42 Eighty One and Paisa

an even shade including thoroughly brushing the surface free from mortar Fourty Two Only

dropping and other foreign matter and sand papered smooth.paint, primer and

putty shall be as per approved make list of GSPHCL

Finishing wall with Weather proof exterior emulsion paint on wall surface (Two

Coat) over and above applying one coat of primer to give an required shape

even shade after throughly Brushing This surface to remove all Dirt and remains Rupees One Hundred Fifty

14 of loose poweder material etc. complete. Primer shall be exterior weather coat 904.00 Sqm 153.35 Three and Paisa Thirty Five

and Paint shall be Appex Weather Emulsion Only Paint and primer shall be as Only

per approved make list of GSPHCL

Painting Two coats (excluding priming coat) on previously painted wood and Rupees One Hundred

15 wood based surface with enamel paint, to give an even shade including 35.00 Sqm 114.24 Fourteen and Paisa Twenty

cleaning the of all dirt, dust and other foreign matter. Four Only

Painting Two coats (excluding priming coat) on previously painted steel and

Rupees Ninety Eight and

16 other metal surface with enamel paint, brushing, to give an even shade 74.00 Sqm 98.93

Paisa Ninety Three Only

including cleaning the surface of all dirt, dust and other foreign matter.

Providing & Fixing to wall,ceiling and floor S.W.R soil waste pipe with 'O' ring of

Rupees Four Hundred

ISI1359/92.Rate inclusive of all fittings like single or double 'Y' with

17 25.00 Rmt 495.91 Ninety Five and Paisa

door,reducer,coupler single T with door bend, PVC pipe clip etc.complete and Ninety One Only

making good the wall,ceiling and floor. 110 mm dia. (Rate Including Z Patti)

Providing & Fixing to wall,ceiling and floor S.W.R soil waste pipe with 'O' ring of

Rupees Two Hundred Sixty

ISI1359/92.Rate inclusive of all fittings like single or double 'Y' with

18 20.00 Rmt 264.97 Four and Paisa Ninety

door,reducer,coupler single T with door bend, PVC pipe clip etc.complete and Seven Only

making good the wall,ceiling and floor. 75 mm dia. (Rate Including Z Patti)

Provinding and Fixing S.W Gully Trap without C.I. grating but brick masonary Rupees One Thousand

19 chamber and water tight CI cover with frame of 300 x 300mm size inside with 5.00 Each 1176.94 One Hundred Seventy Six

standard weight (i) Square mouth traps (B) 150 x 100mm size P or R Type. and Paisa Ninety Four Only

Providing, supplying and fixing Corrugated DWC HDPE Pipes of Class SN8

Structured Wall polyethelene Piping systems (Pipe with online/offline coupler

and elastomeric sealing ring) with non-smooth External Annular Corrugated and

Smooth Internal Surfaces (Double Wall) for non-pressure underground

Sewerage & Drainage application as per EN:13476-3 including all local and

central taxes, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores etc. complete. (150 mm ID

Dia) Including Lowering, laying and jointing of class SN 8 structured wall (

External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and

Rupees Three Hundred

20 fittings with the help of coupler ( on line / off line ) attached with one end of pipes, 91.00 Rmt 396.00

Ninety Six Only

sliding over the elastomeric sealing rubber ring placed on the specified valley of

the corrugation at the spigot end, lowering the same into the trench, laying on the

lower bedding (constructed at bottom of trenches) at prescribed gradient,depth &

alignment ,testing the water tightness of the joints, ensuring the continuity tests

of specified pipe segments etc. complete as per drawing,specifications &

detailed engineering, including carriage of pipes & fittings from site stacks to the

place of laying etc. as per direction of Engineer- in-charge.

Providing laying (to level or slopes) and jointing reinforcedconcrete Light duty

Rupees Two Hundred Fifty

non-pressure pipes I.S. class NP2 of thefollowing internal diameter with collars

21 20.00 Rmt 254.64 Four and Paisa Sixty Four

and butt ends prepared for collar joints including testing of joints complete.(B) Only

Constructing brick masnory chamber for under ground C.I.Inspection chamber

and bends with Brick having crushing strength not less than 35 Kg/Sq.cm.in

cement mortar 1:5,RCC top slab with1:3:6 in cement mortar 1:5 ( cover with

mm dia. steel @ 15 c/c and R.C.C. top slab with 1:2:4 mix ( 1 cement : 2 coarse

sand,4- stone aggregates 20mm nominal size) foundation cocrete 1:5:10 inside

Rupees Four Thousand

laster 15 mm th. c:m 1:3 finished smooth with a floating coat of neat cement on

22 9.00 Each 4196.85 One Hundred Ninety Six

walls & bed concrete etc. complete. Rate are also inclusive of outside plaster and Paisa Eighty Five Only

15mm thick in C.M 1:3 from top of chamber and all side upto 45cm deep below

ground level (I) (ii) Inside dimensions 500mm x 700 mm and 450mm deep for

pipe line with one or two inlets Single or multi purpose pipe line. Rate Also

Inclusive RCC Frame with cover MD 10 ton (Rubber mould Finish) Inner Size

500 x 700mm with all necessary fittings

Rupees Two Hundred Sixty

Extra over for every additional depth of 0.1M. ofpart thereof beyond 450mm

23 9.00 Each 262.24 Two and Paisa Twenty Four

depth for Brick masonry chamber.(ii) for 500mm x 700mm size. Only

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle

posts40mm x 40 mm x6 mm andoil painting 3 coats fixed at 2.5 Mt,C/c. with five

Rupees Three Hundred

Horizontan lines and two diagonals of galvanised steelbarbed wire weighting

24 58.00 Rmt 388.05 Eighty Eight and Paisa

9.38 Kg. per 100 Metre, strainedand fixed to posts with G.I,staples including

fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

Providing and fixing pre-cast Rubber Dye / steel Dye interlocking concrete block

60mm thick with grade of concreteM300 pnumatic compressed / vibrated Rupees Six Hundred Ninety

25 mechanically and asper approved design Confirming to IS 15658 : 2006including 652.00 Sqm 699.93 Nine and Paisa Ninety

35 mm Sand layer for levelling and filling thejoint with sand in proper line and Three Only

level as per guidlines of IRC : SP 63-2018 etc. Complete.

Total Civil(A) =

(B) Electrical WORK:

26A Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper 35.00 Point 374.00 Rupees Three Hundred

PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for Seventy Four Only

earth continuity in exisiting FIA approved ISI mark medium class white colour 20/25

mm dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected

on/in Wall / slab along with continuous G.I. fish wire to draw wires and laid in

approved manner complete with approved make 5/6 Amp. ISI make modular type

switch and accessories mounted in 20 G. G.I. company fabricated metallic / PVC /

Acrylic box covered with appropriate front plate modules erected flushed with wall /

ceiling with necessary modular lamp holder / modular ceiling rose / HD Connector as

directed. (Model approved by EIC and matching colour with switch and accessories)

for concealed wiring. Light point. Cat.-II.

Length of point wiring must not increase than 10 mtr. For that necessary switch boards

and their locations must be finalised before execution by agency otherwise payment

will not be done for extra long point. (For future extention, if required, agency has to

erect one higher size metal box and modular plate as per instruction of EIC. Cost of

blank plate shall be paid as per tender item) [This item include cleaning

(inside/outside) of all G.I. switch boards, electric point box, fan box, MCBDB & box

cutting plaster finishing for modular plate without any gap] [conductor resistance

should be as per IS:8130/1984]

26B For Bell Point., Cat.-II 1.00 Point 374.00 Rupees Three Hundred

Seventy Four Only

26C For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step 12.00 Point 536.00 Rupees Five Hundred Thirty

type Electronic fan regulator both having ISI mark) Cat.-II Six Only

26D For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-II 2.00 Point 405.00 Rupees Four Hundred Five

26E For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI 10.00 Point 234.00 Rupees Two Hundred Thirty

mark) Cat.-II Four Only

27 Providing and erecting Medium Class FIA approved and ISI mark white colour 60.00 Mtr. 24.00 Rupees Twenty Four Only

(embossed) RIGID PVC PIPES of following size complete erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling

along with continuous fish wire to draw mains with necessary fittings and junction

boxes for following dia. (a) 20 mm. dia.

28A Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double- 30.00 Mtr. 22.00 Rupees Twenty Two Only

locking arrangement with grooves, trunking of size not below 12.5 mm in height as per

IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in

joint & erected on wall / ceiling of following size. (a) 20 mm [make and model approved

by EIC as per specification only]

28B 25 mm dia. [make and model approved by EIC as per specification only] 30.00 Mtr. 31.00 Rupees Thirty One Only

29A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade in 250.00 Mtr. 46.00 Rupees Fourty Six Only

exisitng FIA approved ISI mark medium class 20/25/32 mm dia.embossed rigid PVC

pipe with PVC fitting fixed with adhesive solution to be erected on/in wall / slab along

with continuous G. I. fish wire to draw mains laid in approved manner complete with

FRLS PVC insulated wire for earth continuity. (Approved ISI make only) [a] 2 x

sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper

multi stranded conductor for earthing as per standard colour code. (Conductor

resistance should be as per IS:8130/1984)

29B 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS 50.00 Mtr. 62.00 Rupees Sixty Two Only

copper multi stranded conductor for earthing as per standard colour code.(Conductor

resistance should be as per IS:8130/1984)

29C 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS 50.00 Mtr. 120.00 Rupees One Hundred Twenty

copper multi stranded conductor for earthing as per standard colour code.(Conductor Only

resistance should be as per IS:8130/1984)

30 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with 10.00 Mtr. 30.95 Rupees Thirty and Ninety

necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. Five Paisa Only

31 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 3.00 Each 535.00 Rupees Five Hundred Thirty

2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC Five Only

insulated FRLS wire for earth continuity in exisitng FIA approved ISI mark white colour

medium class 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution erected in wall/slab along with continuous G. I. fish wire to draw

wires and laid in approved manner complete with 16 Amp Modular type Swich and

accessories mounted in 20 G. GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall. (a) 16 Amp. Indicator switch

& 1 No. 6/16 A universal socket white colour suitable for 3 pin top duly both having ISI

mark. Cat.-II. (Conductor resistance should be as per IS:8130/1984) (In existing pipe)

32 Providing & Erecting following size of TV Co-axial flexible cable comprising inner 30.00 Mtr. 39.00 Rupees Thirty Nine Only

conductor of solid bare copper insulated with Foam PE & Secondary conductor made

of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with

black PVC insulation. (FINOLEX / RRKABEL / POLYCAB) [b] RG-6

33A Providing and erecting following type of Modular Type Accessories mounted with 20 G 1.00 Each 139.00 Rupees One Hundred Thirty

company fabricated metalic box, single mounting base frame covered with textured / Nine Only

metallic front plate, modules erected with necessary connection. As desired by

Engineer in charge. TV Co-axial Socket outlet. Cat.-II.

33B Blank Plate Single, Cat.-II. 50.00 Each 16.00 Rupees Sixteen Only

34 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with red oxide be 100.00 Sq. Inch 5.94 Rupees Five and Ninety

concealed in wall with necessary plastering & finishing with 3 mm thick laminated Four Paisa Only

sheet with grooving as directed of following depth 3" depth.

35 Providing & Erecting 2.0 mtr. long Earthing system by making minimum bore of 225 2.00 Each 7025.00 Rupees Seven Thousand

mm dia. in soft soil. Suitable for doing pipe-in-pipe technology earthing. Earthing Twenty Five Only

electric rod must be made from Corrosion free hot dip galvanizing pipes having

following specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B ' Class ISI mark of

Reputed Brand, Inner pipe: - 42 mm minimum O.D., Pipe B Class ISI mark reputed

Brand. Terminal Size: 70 mm X 100 mm length, Terminal should be made from inner

pipe for that pipe must be pressed and gave rectangular shape so its work as a

terminal. The hot deep galvanising must be done after above process. Galvanised

thickness must be minimum 75 micron anywhere. SS Nut bolt:- 2 nos. with washer

suitable for 14 mm dia. hole must be provided at terminal. Total minimum Weight

(approx.) of earth electrode with inside conductive material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphur content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for

long time. Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X

mm depth and Cover should be heavy duty cast iron with required size of 300 mm X

300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has

to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance to at least

ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain

earthing & its value for one year. Earthing must be done in the presence of A.E.

36 For above earthing additional charges for boring in hard rock soil (by breaker) & filling 2.00 Each 276.00 Rupees Two Hundred

soft soil in earth pit (certificate for soil have to given by DEE / AE along with Seventy Six Only

37 Providing and erecting modular type accessories mounted on 20G G.I. company 1.00 Each 502.00 Rupees Five Hundred Two

fabricated galvanised metal box covered with approriate front plate modules erected Only

flushed with wall/Ceiling with 1 Nos. of 16 Amp SP indicator Switch & 3 Nos. of 6 Amp

3/5 pin plug. [For TV Switch board] Cat II.

38 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant 1.00 Each 5536.00 Rupees Five Thousand Five

indian standards ammended upto date. Hundred Thirty Six Only

Supplying and fixing following way single phase MCB distrubution board of company fabricated

sheet box with powder coated inside and outside after apply seven tank chemical process of CRCA

sheet cover complete with suitable integral single piece construction tinned copper busbar and link

with all necessary interconnection and with necessary size MS frame for mounting MCBDB. MCBDB

Door, Back side and Body of MCBDB must be made of 1.2 mm thick CRCA Sheet. Manufacturer

must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2)

Seven tank Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete with loose wire box, terminal

connectors for all incoming and outgoing circuits, with suitable size FRLS PVC insulated copper

conductor up to terminal blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper

neutral link, tinned copper earth bar, din bar, detachable gland plate, interconnections, powder

painted including earthing etc. Single phase incoming and horizontal single phase outgoing. For

Way MCBDB: Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988

having sensitivity of 30 mA and breaking capacity of 10 KA), 1 no. MCB 40 Amp. double pole switch

(C curve confirms to IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to

Amp. with NL suitable to operate on 240 Volt A.C. power. (6 Amp:- 4 Nos., 16 Amp:- 4 Nos. &

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected in

line & level with spirit level and finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering / marking on

box done with red colour radium sticker as per site requirement and instructions given by EIC on

site. Font / number size given by EIC on site as per requirement]

39 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 0.50 Sq. Mtr. 2289.00 Rupees Two Thousand Two

existing min. 25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing Hundred Eighty Nine Only

ICDP / MCB SWITCH and energy meter (contractor shall make approved drawing of

Bakelite sheet To arrange required No. of Energy meter & ICDP / MCB switch -busbar

etc. as per Actual space available in electrical room at site)

40 Supplying and erecting KITKAT pattern porcelain cutout with base of following current 1.00 Each 276.00 Rupees Two Hundred

capacity erected on existing block board. (v) 100 A. 500 V. Seventy Six Only

41 Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 GMS 0.50 Rn.Mtr. 4378.00 Rupees Four Thousand Three

sheet dust & vermin proof having hinged door with rubber gasket and necessary Hundred Seventy Eight Only

busbar supports with copper busbar having current density not more than

amp/sqmm (Rated current per Cross Section area) duly wired with colour insulating

tape for phase sequence, three phase & neutral Each equal & one meter long suitable

for following current capacity with necessary painting mounted on wall or pedestal

frame of required size with necessary incoming and outgoing connections with proper

size of copper strip/wire with lugs as directed. Suitable for 100 Amp. capacity having

cross section area not less than 250 sq.mm. [make and model approved by EIC strictly

as per tender specification]

42 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C 3.00 Each 327.00 Rupees Three Hundred

curve) having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box Twenty Seven Only

having following capacity. For 40 Amp.DP

43 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 1.00 Each 730.00 Rupees Seven Hundred Thirty

having 10KA breaking capacity & confirms to IS :8828 in existing box having following Only

capacity [c] 63 Amp. FP

44 Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, 50.00 Mtr. 141.00 Rupees One Hundred Fourty

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - One Only

227 erected in existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required size of copper lugs,

nuts and bolts if required. One wire 16.00 sq. mm.

45 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of 25.00 Each 370.00 Rupees Three Hundred

wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink Seventy Only

shall be made from Aluminum extrusion having enough strength (sample must be

approved by EIC) with polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD : Max. 15%

(G)Rated Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M)Surge protection : Min. 2KV

(N) IP rating: IP

(O)IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q)Fixing clamp design & strength should be sufficient to hold the fitting erected

on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to

submit 5 yrs free replacement Guarantee for complete Fixture) [Approval will be

given strictly subject to item specification]

46 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 15.00 Each 111.00 Rupees One Hundred

voltage, minimum 15000 burning hours life, 500 V in built-surge Eleven Only

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders,

pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable Lamp holder.

47 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 12.00 Each 1929.00 Rupees One Thousand Nine

Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 Hundred Twenty Nine Only

mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power

Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service value:min

m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium quality Ball bearing:

Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade: Aluminium

approx 1.1 mm thick, (11) Colour: White high grade powder coating, (12) Canopy: Two

Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance )as per is 1709-1984,

Aluminium body premium quality, Branded make,(14) Down road: up to 1.0 mtr as per

site requirment, (15) Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as

per site requirment, (17) No vibration and noise due to mechanical parts. (Agency has

to erect safey wire with ceiling fan and checked with EIC) (OEM has to approved

model as per tender specification and tested at ERDA) (Necessary test reports should

be submitted strictly at the time of approval. Sample approved by EIC subject to above

specification only)

48 Supplying & Erecting Decorative Ding Dong bell Stereo type 250 Volt complete 1.00 Each 170.00 Rupees One Hundred

erected on existing polished wooden block or in M.S. box with 3mm thick white ISI Seventy Only

mark laminated sheet. [Anchor (Chime model), vision, rider]

49 Dismantling the existing light, fan, bell, , independent plug point, wiring with mains of 50.00 Point 1.00 Rupees One Only

all types along with accessories etc. complete and handed over to dept.

50 Dismantling the existing switchgears, DB and Busbar of any size complete with / 5.00 Each 7.00 Rupees Seven Only

without board or angle iron frame.

51 Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with 10.00 Each 9.00 Rupees Nine Only

accessories, G.I. down rod, frame etc. and making the site clear.

52 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside 5.00 Each 487.00 Rupees Four Hundred Eighty

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size Seven Only

and length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface

for terrace as per instruction of EIC or wall bracket as per instruction of EIC having

nuts and bolts for fixing the brackets and having spread of Upto 0.50 mtr. length with

suitable rise as per site condition and suitable welded stiffner reducer and nipple with

check nut complete painted with one coat of yellow zinc and two coats of alluminium

paint for Single arm bracket suitable for pole or terrace as per design given by EIC (a)

For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:-

Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted)

53 Providing & erecting approved make street light / wall mounting junction box 5.00 Each 610.00 Rupees Six Hundred Ten Only

compression moulded from SMC (thermoset plastic) vertical sliding cover having

locking with square head stud loop in / loop out in built terminal suitable for four core

cable, waterproof of I.P. 54 protected with clamp or bolt nut & earth bolt of following

size.(B) 250mm x 194mm x 99 mm

54 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light 5.00 Each 3512.00 Rupees Three Thousand Five

Luminaire with total consumption of Max. 45 W with single piece die cast aluminium Hundred Twelve Only

housing, high power LED shall be mounted on high quality metal core PCB with

extremely precison designed heat sink complete with IP66 protection Class with

polycarbonate / thoughened glass cover the fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM 80 guidelines with LED module

min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution.The watt capacity of each LED must

be ≥ 4 watt in streetlight fitting. The Fixture Should be able to be Pole Mounted and

also bracket mounted, provided with high quality driver for protection against high and

low Voltage cut Off, opertional for high amibient and high humid envirnoments, THD of

driver should be less than 10% and P.F > 0.95. Also the Fixture should meet the

following technical criterias Oprating range Voltage 160 to 270 V, system efficiency >=

110 lm/w, and total lumens not less then 4950, CCT > 5000K, CRI > 65, beam angle

120 deg, surge immunity level at least 4 KV integral and 10 KV non integral

The Separate Potted driver should have over current, over voltage protection, short

circuit protection so that the fixture recovers once the fault is removed. In addition to

the above product should be operational in the temperature range of 0 deg to 50 deg

and humidity range of 10% to 90% RH. (Note:- The manufacturer / authorized Channel

partner of the manufacturer has to submit 5yrs free replcement Guarantee for complete

55 Supplying & Erecting following size of Light duty “A” Class G.I. Pipe & erecting as 10.00 Mtr. 171.00 Rupees One Hundred

directed by Engineer-in-charge. For 25 mm dia. Seventy One Only

56 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI 70.00 Mtr. 46.00 Rupees Fourty Six Only

marked copper wires of following size to be erected as directed. 3 core 1.5 sq.mm.

PVC insulated round copper wire ISI mark.

57 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for 150.00 Mtr. 269.00 Rupees Two Hundred Sixty

1100 volt to be laid 90 cms. Under ground or to be laid 90 cms. Under ground or to be Nine Only

laid on wall with suitable G.I. heavy guage 1.0 mm thick cable clamp or in existing

DWC pipe underground or road crossing or floor of following size of cables.For 4 core

58 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 50.00 Mtr. 117.00 Rupees One Hundred

16205 (part 24) 2018)) with minimum load required of 450N capacity with anti rodent Seventeen Only

and ultra violet material properties with necessary connecting accessories of same

material at required depth to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the same to make ground as

per original. (A) For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be

59 Providing & fixing double compressed heavy duty flange type brass cable gland with 10.00 Each 43.00 Rupees Fourty Three Only

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating

tape etc. For following size cables. For 2 to 4 core x 2.5/4.0/6.0 Sq. mm (Sigma, MCI,

Comet Make Only)

60 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for 50.00 Each 8.00 Rupees Eight Only

cable of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. [a]

61 Providing & Erecting Universal Astro 5 KVA intelligent streetlight control system insu 1.00 Each 12895.00 Rupees Twelve Thousand

with weather proof box for outdoor application. (As per specification attached Eight Hundred Ninety Five

separately) (Make and model approved by EIC) Only

62 Providing, erecting, Fabricating the M.S. structure as per requirement of site as per 50.00 Kg 75.10 Rupees Seventy Five and

structure design Including proper size approved by EIC of M.S. angles, flats, bars, Ten Paisa Only

square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting,

welding, grinding and finishing duly painted with Asian/Nerolac make premium quality

oil paint and true care red oxide metal primer,asian paint make with erection on site as

per direction of engineer in charge with necessary grouting cementing, plastering and

finishing complete. All hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

63 Supplying and fixing radium sticker or Painting the number and words for inventory 50.00 Each 2.00 Rupees Two Only

Identification on erected fittings / equipment’s or Such accessories (MCBDB, Panel,

Pole, Rack, Earthing, Pump, Door etc.) as may required with good quality of enamelled

paint or fade proof, weather proof, waterproof high quality vinyl radium sticker for

indoor / outdoor application as directed by engineer in charge. For one character

(The colour of sticker / paint should be as per instruction given by EIC as per site

Total Electrical(B) =

Total Amount (A+B) =

Total Amount (A+B) =

Ex.Engg,(Ele.)(SP) I/c Ex. Engineer

Signature of the contractor. G.S.P.H.C.Ltd, G.S.P.H.C.Ltd. Rajkot