Design Engineering Procurement and construction for Widening of Road and allied works including Road lighting and Landscaping cum Beautification works from Dalibaba Chowk to Satna River Bridge including DLP and Maintenance of 5 Years in Maihar Road

Amount

Providing and construction of Raised Pedestrian Crossing across the road of 100 mm height and width of 2.5 m with Cobble stone side slope in 1:10. 100mm dia bollard to be fixed on sides. The surface to be painted with brick red colour complete as per drawings or as directed by the Engineer

Supply of Tree Surround - (Type - 2) Each Tree Surround consists of 4 Nos panels of 750 mm Length X 750 mm Width X 40 mm thickness. Over all dimensions 1500 Length x 1500 Width x 40 / 100 thickness (Grey Colour Finish)

RETRO-REFLECTIVE STUDS/ROAD STUDS/CAT EYE Road Stud with fixture in Aluminium with inbuilt LED with solar panel

HDPE waste containers or rigid liners- Twin Dust bin 80 litres each with fixed stand & removable lid.

Benches - Integrated seat and backrest with arm, with eating capacity of 3 and number of arms-2,Material of Main Frame- Mild steel, Material of seat & back rest- Mild steel rectangular section pipe of 1.6mm thickness. Overall dimension - 1500mm x 1000mm x 800mm, seating height from floor- 500mm.

Water ATM- Providing & Fixing Water coolers with inbuitl RO including all necessary fittings capacity 250-300 ltr approved by Engineer -in -charge

Precast RCC Perforated drain cover in drain Type"B"(Width≤0.6mtr)and Slabs for Internal Roads Crossing

Providing Barricading for Trenches using 80 - 100 mm dia Wooden Ballies as vertical post, atleast 1.5m above ground level and atleast 30-45 cm below ground level at a spacing of 3 m. Two rows of PVC Tape (preferabley red in colour) strip barricading horizontal strip securely tied by the vertical members. Vertical members shall be painted in red and white colour. Rate is inclusive removal and cleaning of site complete in all respect.

Signage- Backlit signboards with Aluminium sheet side panels (11” depth) Main frame for the box 1.0” square MS pipe (16 gauge) with PU coating. Tensioning system Klick rail system with Allen key bolt (mechanical tensioning) Back panel 24 gauge pre coated GI sheet Top, Bottom & Side panels 16 gauge Aluminium sheet, powder coated Electricals 4 ft Philips/GE tubes with copper chokes/ starters of Philips/ GE Flex 3M Panaflex Vinyl 3 M 3630 series Reflector Light enhancement film Laminate 3M 8519 series laminate Job scope includes fabrication, transportation and installation at site in all respects including grouting in PCC. Height & color of the signage as per Engineer-in-charge

Main Lighting Distribution Board (Outdoor) Supplying, fixing, testing & commissioning of outdoor wall / floor mounted compartmentalized type LT Panel suitable for 415V 3 phase, 50 Hz, 4 wire system complete with all accessories and miscellaneous equipment as per specification. The panel shall be fabricated out of 2/ 2.5 mm thick GI sheet steel, powder coated paint & provided with required gasket for dust / vermin proof with degree of protection IP55 of suitable size double door & locking arrangement with provision of following : Incomer MCCB, 4 pole, 63-80Amp. -1 no. 415V, 50 Hz TPN Busbar - 1 set. 50-63 A TPN MCCB for three phase consumers-4 nos. Digital Energy Meter – 1no. RBY Phase indication LED lamps – 3 nos. Holder with switch & 9watt LED lamp for panel illumination Earthing terminal – 2 nos. Wiring & insulation sheet Cable glands suitable for 3.5Cx 50 mm² PVC armoured cable Concrete foundation (for plinth mounting) Rating plate/ Name plate Danger Board Sundries

Lighting Feeder Pillars: (Location - Outdoor) Supplying, fixing, testing & commissioning of outdoor wall / floor mounted cabicle type CCMS feeder pillar suitable for 415V 3 phase, 50 Hz, 4 wire system complete with all accessories and miscellaneous equipment as per specification. The feeder pillar shall be fabricated out of 2/ 2.5 mm hot dip galvanized GI sheet steel, powder coated paint & provided with required gasket for dust / vermin proof with degree of protection IP55 of suitable size double door & locking arrangement with provision of following: Incomer MCCB, 4 pole, 50 - 63Amp. -1 no. 415V, 50 Hz TPN Busbar - 1 set. 16-32 A TPN MCB for three phase consumers-4 nos. Digital Energy Meter – 1no. Smart controls with surge protective devies- 1 lot Power Contractor with Astronomical timer based Auto On/ Off Switch – 1 set. RBY Phase indication LED lamps – 3 nos. Holder with switch & 9watt LED lamp for panel illumination Earthing terminal – 2 nos. Wiring & insulation sheet Cable glands suitable for 3.5Cx 50 mm²/16 mm² PVC armoured cable Concrete foundation (for plinth mounting) Rating plate/ Name plate Danger Board Sundries

LED Street Light Luminaire for City Roads/ Highways: Supply and providing LED Street Light Luminaries made of Epoxy powder coated pressure die-cast aluminium housing with Glass Optical Cover (Glass/ Moulded Lens), Lumen efficacy >110 Lumen/ W, Correlated Color Temperature 5700K, Color Rendering Index > 70, Lumen output- L70 @ 50000 hrs, Power Factor ≥ 0.95, THD <10%, Built-in Surge protection- 4KV, External Surge Protection-10KV, Ingress protection (IP)-66, Dimmable Type-Potted Driver (housed in a separate compartment with built-in surge voltage, open/short circuit protections). LEDs shall be provided with non-yellowing modular secondary lens optics with high impact resistance (IK 07), Operating Temperature Range--10°C to 45°C, Input Voltage-140 to 270V AC, Input Frequency-50 Hz. 150W LED (for main road lighting)

70W LED with Lumen Efficacy > 124 Lm/W (for service lane/ Pathway lighting)

External Street Light Controller (SLC) & Other Items: Supply & Installation of External Street light controller-SLC for street lights

LoRa Gateway

Web application & cloud hosting, O&M charges including data charges for 5 years

Decorative Light Post: Providing & fixing of Lighting pole of lacquered iron composite panel of Height 3M with Water resistant Led Light Exclusive lacquered iron profile with internal structure Trapezoid section structure Lighting Smart downlight - 1x Essential Closed 1CT/GU5.3/50w (Quantity-1) Access door -Flush -Opening 500 x 128 mm . At 600mm from the Bottom. At 150mm from the top Made from a dedicated aluminium profile Enables access to the electrical connecting box Finish -Polyester powder coating RAL colors or special finish -Natural anodization (20 microns) Base plate -The base plate should be of die cast iron with the dimension 300x300mm

Earthing for Lighting Pole Providing MS Rod Earth Electrode (20 mm dia x 1.5 m long) with required length of 6SWG GI wire for individual lighting pole earthing.

Electrical Metering & Connection Charges: SITC of metering equipment including application fee, security deposit, consumption demand charges & other charges etc for sanction/ release of electrical connection from concerned power supply company/ DISCOM.

Bidder Name

Amount

KALYAN TOLL INFRASTRUCTURE LIMITED(GSTN-23AACCK1840M1ZN)

MOHAN LAL CONSTRUCTION(GSTN-23AATFM7725P1ZG)

SONBHADRA CONSTRUCTION COMPANY(GSTN-23ABAFS4257J1Z6)

KRISHNAKANT SAHGORA(GSTN-23ARLPS0611H1Z0)

RAJESH KUMAR KAILA(GSTN-NA)

SONBHADRA CONSTRUCTION COMPANY

MOHAN LAL CONSTRUCTION

RAJESH KUMAR KAILA

KALYAN TOLL INFRASTRUCTURE LIMITED

MOHAN LAL CONSTRUCTION

SONBHADRA CONSTRUCTION COMPANY

RAJESH KUMAR KAILA

KALYAN TOLL INFRASTRUCTURE LIMITED