Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹7.7 Cr
EMD Value
₹7.7 L
Closing Date
12 Apr 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Construction of Boundary Wall, Guard room and other related works for extended campus of IIT Delhi at Village Badsa, Distt Jhajjar, Haryana
NBCC/SBGDelhi1/NIT/IITJhajjar/2024/87~EW743b142132d0cb555ae34acd
NBCC/SBGDelhi1/NIT/IITJhajjar/2024/87
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹7.7 L
12 Apr 2024
16 Mar 2024
12 Apr 2024
16 Mar 2024
12 Apr 2024
Bill of Quantities
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
1 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush Sqm 23883.30 17.6 420346.08
wood, trees and saplings of girth up to 30 cm measured at a height
of 1 m above ground level and removal of rubbish up to a distance of
50 m outside the periphery of the area cleared.
2 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator) cum 599.41 177.50 106395.9673
/ manual means over areas (exceeding 30cm in depth, 1.5m in width
as well as 10 sqm on plan) including getting out and disposal of
excavated earth, lead up to 50m and lift up to 1.5m,as directed by
Engineer-in-Charge. All kinds of soil.
3 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, cum 452.83 196.00 88755.04603
sides of foundations etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead
up to 50 m and lift up to 1.5 m.
4 2.27 Supplying and filling in plinth with sand under floors, including cum 126.88 2123.75 269461.4
watering, ramming, consolidating and dressing complete.
5 4.1 Providing and laying in position cement concrete of specified grade 0.00 0
excluding the cost of centering and shuttering - All work up to plinth
6 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate cum 1.84 7878.50 14494.62795
20 mm nominal size)
7 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate cum 148.24 6812.00 1009816.585
40 mm nominal size)
8 4.2.3 Providing & laying cement concrete in retaining wall , return walls ( Cum 56.66 9895.20 560653.8685
any thickness ) ,including attached pillasters,columns peirs,
abuttments ,pillars ,posts , struts, buttresses , string or lacing
courses,parapets ,coping , bed blocks , anchor blocks,plain window
sills,fillets , sunken floors,etc.upto floor five level , excluding the cost
of centring , shuttering & finishing.1:2:4 ( 1 cement :2 coarse sand :4
stone aggregate20mm nominal size
9 4.3.2 Centering and shuttering including strutting, propping etc. and Sqm 634.45 842.50 534524.125
removal of form work for :4.3.2 Retaining walls, return walls, walls
(any thickness) including attached pilasters, buttresses, plinth and
string courses fillets, kerbs and steps etc.
10 20.1.1 Providing, driving with hydraulic piling rigs with power units and Rmt 8600.00 2767.00 23796200
installing driven cast-in-situ reinforced cement concrete piles of
grade M-25 of specified diameter and length below the pile cap, to
carry safe working load not less than specified, excluding the cost of
steel reinforcement but including the cost of shoe and the length of
pile to be embedded in the pile cap etc. all complete. (Length of pile
for payment shall be measured from top of shoe to the bottom of
pile 400 mm dia piles
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
11 20.1.2 Providing, driving with hydraulic piling rigs with power units and Rmt 430.00 3430.65 1475179.5
installing driven cast-in-situ reinforced cement concrete piles of
grade M-25 of specified diameter and length below the pile cap, to
carry safe working load not less than specified, excluding the cost of
steel reinforcement but including the cost of shoe and the length of
pile to be embedded in the pile cap etc. all complete. (Length of pile
for payment shall be measured from top of shoe to the bottom of
pile 450 mm dia piles
12 20.7.1.1 Cyclic vertical load testing of pile in accordance with IS Code Per Test 10.00 19632.4 196324
ofpractice IS:2911 (part IV) by Kentledge method including
preparation of pile head etc for.20.7.1 Single pile Upto 50 tonne Safe
13 5.33 5.33A Providing and laying in position ready mixed or site batched 0.00 0
design mix cement concrete for reinforced cement concrete work;
using coarse aggregate and fine aggregate derived from natural
sources and using recycled concrete aggregate (RCA) as coarse
aggregate and fine aggregate within permissible utilization of 20%
each, Portland Pozzolana /Ordinary Portland/Portland Slag cement,
admixtures in recommended proportions as per IS: 9103 to
accelerate / retard setting of concrete, to improve durability and
workability without impairing strength; including pumping of
concrete to site of laying, curing, carriage for all leads; but excluding
the cost of centering, shuttering, finishing and reinforcement as per
direction of the engineer-in-charge; for the following grades of
concrete.Note: Extra cement up to 10% of the minimum specified
cement content in design mix shall be payable separately. In case
the cement content in design mix is more than 110% of the specified
minimum cement content, the contractor shall have discretion to
either re-design the mix or bear the cost of extra cement.
14 5.33A.1.1 All works upto plinth level Concrete of M25 grade with minimum cum 446.51 9333.95 4167737.484
cement content of 330 kg /cum
15 5.33A.2.1 All works above plinth level up to floor V level Concrete of M25 cum 158.98 9689.60 1540417.893
grade with minimum cement content of 330 kg /cum
16 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, Kg 147182.93 107.85 15873679
bending, placing in position and binding all complete upto plinth
level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
17 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, Kg 32681.34 107.85 3524682.452
bending, placing in position and binding all complete above plinth
level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
18 5.9 Centering and shuttering including strutting, propping etc. and 0.00 0
removal of form for all heights :
19 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 953.62 392.15 373961.6909
20 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 132.41 927.25 122777.8448
21 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 2692.49 736.40 1982752.876
22 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 1973.84 961.30 1897447.586
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
23 5.9.15 Small lintels not exceeding 1.5 m clear span, moulding as in cornices, sqm 12.05 392.15 4725.79965
window sills, string courses, bands, copings, bed plates, anchor
blocks and the like
24 5.9.19 Weather shade, Chajjas, corbels etc., including edges sqm 2.64 951.10 2513.7573
25 6.1.2 7.1 Random rubble masonry with hard stone in foundation and cum 0.00 7132.25 0
plinth including levelling up with cement concrete 1:6:12 (1 cement :
6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto
plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse
26 6.47 Providing and laying autoclaved aerated cement blocks masonry cum 1051.53 8333.65 8763091.485
with 150mm/230mm/300 mm thick AAC blocks in super structure
above plinth level up to floor V level with RCC band at sill level and
lintel level with approved block laying polymer modified adhesive
mortar all complete as per direction of Engineer-in-Charge. (The
payment of RCC band and reinforcement shall be made for
27 7.8.1 Coursed rubble masonry with hard stone (first or second sort) in cum 28.98 10741.60 311291.568
superstructure above plinth level and upto floor five level. 7.8.1
Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse
28 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, 0.00 0
premoulded and prepolished, machine cut for kitchen platforms,
vanity counters, window sills, facias and similar locations of required
size,approved shade, colour and texture laid over 20 mm thick base
cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups,
including rubbing, curing, moulding and polishing to edges to give
high gloss finish etc. complete at all levels. Granite of any colour and
31 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 0.00 0
2202 (Part I) non-decorative type, core of block board construction
with frame of 1st class hard wood and well matched commercial 3
veneering with vertical grains or cross bands and face veneers on
both faces of shutters
34 9.147.A providing and fixing factory made upvc glazed / wire mesh windows 0.00 0
35 9.147.A1.3 Using R4 Series with frame (64 mm & above )x (45 mm & above ) & Sqm 1.62 9628.60 15598.332
sash (44 mm & above ) x ( 55 mm & above ) with zinc alloy zamak
powder coted handel on every panel along with multi point locking
system ( height above 1.8m)
36 9.147.A3.2 Using R3 series with frame ( 85 mm & above ) x ( 40 mm & above ) Sqm 12.60 9968.70 125605.62
and Glazed sash ( 30 mm & above ) x ( 50 mm & above ) & fly screen
sash (20 mm & above )x ( 50 mm & above) with zinck alloy zamak
powder coated handle every glazed panel along with multi -point
locking system ( 1.8 m height upto.)
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
37 21.3 Providing and fixing glazing in PVC / aluminum door, window, Sqm 12.60 1505.25 18966.15
ventilator shutters and partitions etc. with EPDM rubber / neoprene
gasket etc. complete as per the architectural drawings and the
directions of engineerin- charge. (Cost of aluminum snap beading
shall be paid in basic item.)With float glass panes of 5 mm thickness
(weight not less than 12.50 kg/sqm)
38 9.97.3 Providing and fixing aluminium tower bolts, ISI marked, anodised Each 7.00 99.70 697.9
(anodic coating not less than grade AC 10 as per IS : 1868 )
transparent or dyed to required colour or shade, with necessary
screws etc. complete 200x10mm
39 9.165.1 Providing and fixing bright /matt finished Stainless Steel handles of Each 18.00 119.20 2145.6
approved quality & make with necessary screws etc all complete.
40 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI Each 9.00 72.35 651.15
marked, anodised (anodic coating not less than grade AC 10 as per IS
: 1868) transparent or dyed to required colour and shade, with
necessary screws etc. completeTwin rubber stopper
41 10.14.3.1 Providing and fixing pressed steel door frames conforming to IS: rmt 35.70 640.20 22855.14
4351, manufactured from commercial mild steel sheet of 1.60 mm
thickness, including hinges, jamb, lock jamb, bead and if required
angle threshold of mild steel angle of section 50x25 mm, or base ties
of 1.60 mm, pressed mild steel welded or rigidly fixed together by
mechanical means, including M.S. pressed butt hinges 2.5 mm thick
with mortar guards, lock strike-plate and shock absorbers as
specified and applying a coat of approved steel primer after pre-
treatment of the surface as directed by Engineer-in-charge
42 10.1 Structural steel work in single section , fixed with or without Kg 5555.60 117.35 651949.66
connecting plate, including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer all complete.
43 10.25.2 Steel work welded in built up sections/ framed work, including kg 1164.95 172.60 201070.4736
cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer using structural steel etc. as required.10.25.2
In gratings, frames, guard bar, ladder, railings, brackets, gates and
44 16.53 Providing and fixing concertina coil fencing with punched tape Rmt 2338.33 375.80 878744.414
concertina coil 600 mm dia 10 metre openable length ( total length
90 m), having 50 nos rounds per 6 metre length, upto 3 m height of
wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart
and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with
G.I. staples and G.I. clips to retain horizontal, including necessary
bolts or G.I. barbed wire tied to angle iron, all complete as per
direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.)
/ Spring core (2.5mm thick) wire of high tensile strength of 165 kg/
sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre
(cost of M.S. angle, C.C. blocks shall be paid separately
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
45 11.20.1 Chequerred precast cement concrete tiles 22 mm thick in footpath & sqm 0.00 1402.00 0
courtyard, jointed with neat cement slurry mixed with pigment to
match the shade of tiles, including rubbing and cleaning etc.
complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4
coarse sand). Light shade pigment using white cement
46 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over sqm 4.62 1948.25 8995.07025
and jointed with grey cement slurry mixed with pigment to match
the shade of the slab, including rubbing and polishing complete with
base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :11.26.1 25
47 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and sqm 0.90 2354.70 2119.23
pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3
coarse sand) and jointed with grey cement slurry mixed with
pigment to match the shade of the slabs, including rubbing and
polishing complete.
48 11.41A Providing and laying vitrified floor tiles in different sizes (thickness to 0.00 0
be specified by the manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved make, in all colours
and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm
including grouting the joints with white cement and matching
pigments etc., complete
49 11.41A.2.4 Glazed vitrified floor tiles polished finish of size Size of Tile 800 x sqm 49.66 2056.90 102147.968
50 11.41A.3.1 Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x sqm 9.23 1464.85 13514.63286
51 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be sqm 6.83 1623.05 11091.9237
specified by manufacturer ), with water absorption less than 0.08 %
and conforming to I.S. 15622, of approved make, in all colours &
shade, in skirting, riser of steps, over 12 mm thick bed of cement
mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement
slurry @ 3.3 kg/ sqm including grouting the joint with white cement
& matching pigments etc. complete. Size of Tile 600x600 mm
52 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, Rmt 55.98 510.95 28602.981
Vanities etc., including machine polishing to edge to give high gloss
finish etc. complete as per design approved by Engineer-in-Charge.
53 11.39 Providing and laying Rectified Glazed Ceramic floor tiles of size sqm 0.00 1330.00 0
300x300 mm or more (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of approved
make, in all colours, shades, White, Ivory, Grey, Fume Red Brown,
laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand),
jointing with grey cement slurry @ 3.3kg/sqm including pointing the
joints with white cement and matching pigments etc., complete.
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
54 8.31 Providing and fixing Ist quality Ceramic glazed wall tiles conforming sqm 38.41 1267.95 48696.8877
to IS: 15622 (thickness to be specified by the manufacturer), of
approvedmake, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer-in-Charge, in skirting,
risers of stepsand dados, over 12 mm thick bed of cement mortar
1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry
@ 3.3kg per sqm, including pointing in white cement mixed with
pigment of matching shade complete.
55 11.56.1 Providing and laying Polished Granite stone flooring in required sqm 0.00 4481.30 0
design and patterns, in linear as well as curvilinear portions of the
building, all complete as per the architectural drawings, with18 mm
thick stone slab over 20 mm (average) thick base of cement mortar
1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry
and pointing with white cement slurry admixed withpigment of
matching shade, including rubbing, curing and polishing etc. all
complete as specified and as directed by the Engineer-in-
Charge.8.13.1 Polished Granite stone slab jet Black, Cherry Red, Elite
Brown, Cat Eye or equivalent.
56 ROOFING WORK 0.00 0
57 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 metre 38.81 305.15 11842.8715
coarse sand : 4 stone aggregate 10 mm and down gauge) including
finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per
standard design In 75x75 mm deep chase
58 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm Each 4.00 298.25 1193
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400
micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse
sand) and a coat of neat cement, rounding the edges and making
and finishing the outlet complete.
59 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water metre 12.80 377.40 4830.72
pipes conforming to IS : 13592 Type A, including jointing with seal
ring conforming to IS : 5382, leaving 10 mm gap for thermal
expansion, (i) Single socketed pipes. 110 mm diameter
60 Providing and fixing on wall face unplasticised - PVC moulded 0.00 0
fittings/ accessories for unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion
61 12.42.3 Single tee with door 110 mm Each 2.00 234.15 468.3
63 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design Each 12.00 371.30 4455.6
to unplasticised - PVC rain water pipes by means of 50x50x50 mm
hard wood plugs, screwed with M.S. screws of required length,
including cutting brick work and fixing in cement mortar 1:4 (1
cement : 4 coarse sand) and making good the wall etc. complete.
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
64 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron Each 4.00 54.70 218.8
grating 15 cm diameter and weighing not less than 440 grams.
65 13.5.2 15 mm cement plaster on rough side of single or half brick wall of sqm 113.25 395.35 44773.3875
66 13.4.2 12 mm cement plaster of mix : :6 (1 cement: 6 coarse sand) sqm 10581.75 343.65 3636418.559
67 13.16.1 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) sqm 130.11 300.45 39090.11485
68 13.9.1 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating sqm 0.00 449.55 0
coat of neat cement. 12 mm cement plaster
69 13.80 Providing and applying white cement based putty of average sqm 10581.75 156.05 1651282.166
thickness 1 mm, of approved brand and manufacturer, over the
plastered wall surface to prepare the surface even and smooth
70 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : sqm 10549.77 160.60 1694293.062
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
71 13.62.1 Painting with synthetic enamel paint of approved brand and sqm 43.66 226.25 9878.188125
manufacture to give an even shade : Two or more coats on new
72 13.41.1 Distempering with1st quality acrylic distemper(ready mixed ) having sqm 145.23 185.65 26962.04233
voc content less than 50gram litre of approved brand and
manufacture to give an even shade : New work (two or more coats)
over and including water thinnable priming coat with cement primer
voc content less than 50 gram/litre
73 22.23.1 Providing and applying integral crystalline slurry of hydrophilic in 0.00 0
nature for waterproofing treatment to the RCC structures like
retaining walls of the basement, water tanks, roof slabs, podiums,
reservoir, sewage & water treatment plant, tunnels/ subway and
bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts
integral crystalline slurry : 2 parts water) for vertical surfaces and 3 :
1 (3 parts integral crystalline slurry : 1 part water) for horizontal
surfaces and applying the same from negative (internal) side with
the help of synthetic fiber brush. The material shall meet the
requirements as specified in ACI- 212-3R-2010 i.e by reducing
permeability of concrete by more than 90% compared with control
concrete as per DIN 1048 and resistant to 16 bar hydrostatic
pressure on negative side. The crystalline slurry shall be capable of
self-healing of cracks up to a width of 0.50mm. The work shall be
carried out all complete as per specification and the direction of the
engineer-in-charge. The product performance shall carry guaranteed
for 10 years against any leakage.
74 22.23.1 For vertical surface two coats @0.70 kg per sqm per coat sqm 0.00 472.9 0
75 22.23.2 For horizontal surface one coat @1.10 kg per sqm. sqm 70.46 362.8 25562.888
76 22.14.1 Grading roof for water proofing treatment with Cement concrete cum 7.05 8042.30 56666.0458
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
77 16.10 Preparation and consolidation of sub grade with power road roller of sqm 180.00 218.90 39402
8 to 12 tonne capacity after excavating earth to an average of 22.5
cm depth, dressing to camber and consolidating with road roller
including making good the undulations etc. and re-rolling the sub
grade and disposal of surplus earthwith lead upto 50 metres.
78 16.78.2 Construction of granular sub-base by providing close graded cum 27.00 2924.85 78970.95
Material conforming to specifications, mixing in a mechanical mix
plant at OMC, carriage of mixed material by tippers to work site, for
all leads & lifts, spreading in uniform layers of specified thickness
with motor grader on prepared surface and compacting with
vibratory power roller to achieve the desired density, complete as
per specifications and directions of Engineer-in-Charge.With
material conforming to Grade-I (size range 53 mm to
0.075 mm) having CBR Value-25
79 16.79 Providing, laying, spreading and compacting graded stone aggregate cum 18.00 2914.30 52457.4
(size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)
specification including premixing the material with water at OMC in
for all leads & lifts, laying in uniform layers with mechanical
paverfinisher in sub- base / base course on well prepared surface
and compacting with vibratory roller of 8 to 10 tonne capacity to
achievethe desired density, complete as per specifications and
directions of Engineer-in-Charge
80 16.54.1 Providing and laying Dense Graded Bituminous Macadam using cum 9.00 11129.55 100165.95
crushed stone aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site by
tippers, laying with paver finisher equiped with electronic sensor to
the required grade, level and alignment and rolling with smooth
wheeled, vibratory and tandem rollers as per specifications to
achieve the desired compaction and density, complete as per
specificatons and directions of Engineer-in-Charge50 to 100 mm
average compacted thickness with bitumen of grade VG-30 @ 5%
(percentage by weight of total mix) and lime filler @ 2% (percentage
by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-
120 TPH capacity.
81 16.3 Providing and applying tack coat using hot straight run bitumen of 0.00 0
grade VG - 10, including heating the bitumen, spraying the bitumen
with mechanically operated spray unit fitted on bitumen boiler,
cleaning and preparing the existing road surface as per specifications
83 16.30.2 On Bitumen surface @ 0.50 Kg/sqm. Sqm 180.00 48.20 8676
84 16.35 2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm Sqm 180.00 252.15 45387
nominal size per 100 sqm and bitumen emulsion (medium setting
min. 65% bitumen contents) complying with IS : 8887, using 96 kg
per cum of chippings of road surface, including consolidation with
road roller etc complete complete.
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
85 16.69 Providing and laying at or near ground level factory made kerb stone Sqm 2.70 10117.60 27317.52
of M-25 grade cement concrete in position to the required line, level
nd curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse
sand), including making joints with or without grooves (thickness of
joints except at sharp curve shall not to more than 5mm), including
making drainage opening wherever required complete etc. as per
direction of Engineer-in-charge (length of finished kerb edging shall
be measured for payment). (Precast C.C. kerb stone shall be
approved by Engineer-in-charge).
86 16.50 Providing and fixing Glow studs of size 100x20 mm made of heavy Each 17.00 206.30 3507.1
duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or
HIP (High impact polystyrene) or ABS having electronically welded
micro- prismatic lens with abrasion resistant coating as approved by
Engineer in charge. The glow stud shall support a load of 13635 kg
tested in accordance with ASTM D4280. The slope of retro- reflective
surface shall be 35 (+/-5) degress to base .The reflective panels on
both sides with at least 12 cm of reflective area up each side. The
luminance intensity should be as per the specification and shall be
tested as described in ASTM I: 809 as recommended in BS: 873 part
4 : 1973. The studs shall be fixed to the Road surface using the
adhesive conforming to IS, as per procedure recommended by the
manufacturer complete and as per direction of Engineer-in-charge
87 16.62 Providing and applying 2.5 mm thick road marking strips Sqm 6.00 747.80 4486.8
(retroreflective) of specified shade/ colour using hot thermoplastic
material by fully/ semi automatic thermoplastic paint applicator
machine fitted with profile shoe, glass beads dispenser, propane
tank heater and profile shoe heater, driven by experienced operator
on road surface
including cost of material, labour, T&P, cleaning the road surface o f
all dirt, seals, oil, grease and foreign material etc. complete as per
direction of Engineer-in-charge and accordance with applicable
specifications.
88 17.3.1 Providing and fixing white vitreous china pedestal type water closet Each 3.00 8006.60 24019.8
(European type) with seat and lid, 10 litre low level white vitreous
china flushing cistern & C.P. flush bend with fittings & C.I. brackets,
40 mm flush bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved municipal design
complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required : 17.3.1 W.C.
pan with ISI marked white solid plastic seat and lid
89 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Each 3.00 3960.55 11881.65
Brass single hole basin mixer of approved quality and make,
including painting of fittings and brackets, cutting and making good
the walls wherever required:-(a) White Vitreous China Wash basin
size 550x400 mm with a 15 mm CP Brass single hole basin mixer
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
90 17.4.3 Providing and fixing white vitreous china flat back or wall corner Each 2.00 13417.30 26834.6
type lipped front urinal basin of 430x260x350 mm and 340x410x265
mm sizes respectively with automatic flushing cistern with standard
flush pipe and C.P. brass spreaders with brass unions and G.I clamps
complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required :Range of three
urinal basins with 10litre white P.V.C.
automatic flushing cistern
91 8.10.1 Providing and fixing stone slab with table rubbed, edges rounded Each 2.00 3500.45 7000.9
and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal
partitions by cutting a chase of appropriate width with chase cutter
and embedding the stone in the chase with epoxy grout or with
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
6 mm nominal size) as per direction of Engineer-in-charge and
finished smooth. White Agaria Marble Stone
92 17.10.1.1 Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as Each 1.00 6945.60 6945.6
per IS: 13983 with C.I. brackets and stainless steel plug 40 mm,
including painting of fittings and brackets, cutting and making good
the walls wherever required :Kitchen sink with drain board
510x1040 mm bowl depth 250 mm
93 SUB-HEAD-2-SANITARY C.P FITTINGS 0.00 0
94 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet Each 1.00 222.35 222.35
:150 mm diameter
95 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior Each 3.00 1,607.95 4823.85
nglass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
96 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to Each 3.00 708.95 2126.85
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.600 mm long towel rail
with total length of 645 mm, width 78 mm and effective height of 88
mm, weighing not less than 190 gms
97 18.65 Providing and fixing PTMT soap Dish Holder having length of Each 3.00 111.45 334.35
138mm,breadth 102mm, height of 75mm with concealed fitting
arrangements,weighing not less than 106 gms.
98 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved Each 3.00 1034.80 3104.4
quality & make and as per the direction of Engineerin- charge.
99 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved Each 5.00 820.70 4103.5
quality conforming to IS standards and weighing not less than 810
gms.15 mm nominal bore
100 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser Each 5.00 574.30 2871.5
points of approved quality conforming to IS:8931 15mm nominal
101 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 Each 3.00 168.35 505.05
mm high and 112 mm distance from wall of standard shape with
bracket of the same materials with snap fittings of approved quality
and colour, weighing not less than 105 gms
102 17.34.1 Providing and fixing toilet paper holder C.P. brass Each 3.00 803.70 2411.1
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
103 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 Each 3.00 349.15 1047.45
metre long with S.S. triangular plate to Eureopean type W.C. of
quality and make as approved by Engineer - in - charge.
104 17.28.1 Providing and fixing P.V.C. waste pipe for sink or wash basin each 1.00 103.9 103.9
including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia
105 18.58.1.1 Providing and fixing PTMT grating of approved quality and each 5.00 37.60 188
colour.Circular type 100 mm nominal dia
106 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 0.00 0
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings This includes jointing of pipes &
fittings with one step CPVC solvent cement, trenching, refilling &
testing of joints complete as per direction of Engineer in Charge.
107 Internal work - Exposed on wall 0.00 0
108 18.7.3 25 mm nominal outer dia Pipes Rmt 21.00 401.55 8432.55
109 18.7.4 32 mm nominal outer dia Pipes Rmt 21.00 518.75 10893.75
110 18.7.5 40 mm nominal outer dia Pipes Rmt 12.00 702.95 8435.4
111 18.7.6 50 mm nominal outer dia Pipes Rmt 65.00 934.15 60719.75
112 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 0.00 0
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction
of Engineer in Charge.
113 Concealed work, including cutting chases and making good the 0.00 0
114 18.8.1 15 mm nominal outer dia Pipes Rmt 64.00 497.80 31859.2
115 18.8.2 20 mm nominal outer dia Pipes Each 5.00 537.60 2688
116 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or 0
low pressure, with plastic floats complete :
117 25mm dia nominal bore Each 2.00 464.05 928.1
118 18.48 Providing material and labour for placing on terrace (at all floor Ltr 2000.00 11.00 22000
levels) polyethylene water storage tank ISI : 12701 marked with
cover and suitable locking arrangement and making necessary holes
for inlet, outlet and overflow pipes but without fittings and the base
support for tank
119 17.35.1.3 Providing and fixing soil, waste and vent pipes : Hubless Rmt 19.50 1169.30 22801.35
centrifugally cast (spun) iron pipes epoxy coated inside & outside
IS:15905: 100 mm diameter :
120 17.35.2.3 Providing and fixing soil, waste and vent pipes : Hubless Rmt 25.50 964.25 24588.375
centrifugally cast (spun) iron pipes epoxy coated inside & outside
IS:15905: 75 mm diameter :
121 17.38 Providing and fixing plain bend of required degree. Hubless 0.00 0
centrifugally cast (spun) iron epoxy coated inside & outside as per
122 Bend of required degree with access door, 0.00 0
125 17.39 Plain bend of required degree. 0.00 0
Digitally signed by AVDHESH
BILL OF QUANTITES
Name of Work :- Construction of Boundary wall, Guard Room and other related works for extended campus of IIT Delhi at Village Badsa, Distt
Jhajjar , Haryana
Sr. No DSR-23 code Description Unit Quantity Rate Amount
128 17.44.2.2 Providing and fixing single equal plain junction of required degree 0.00 0
:75x75x75 mmSand cast iron S&S as per IS - 3989
130 19.4.2.2 Providing and fixing square-mouth S.W. gully trap grade‘A’ complete each 5.00 2711.70 13558.5
with C.I. grating, brick masonry chamber with water tight C.I. cover
with frame of 300 x300 mm size (inside) the weight of cover to be
not less than 4.50 kg and frame to be not less than 2.70 kg as per
standard design 150 x 100 mm size P type With Sewer bricks
conforming to IS : 4885
131 19.27.1 Constructing brick masonry road gully chamber 50X45X60 cm with each 3.00 5957.90 17873.7
brick of class designation 75 in cement mortar 1:4 (1 cement : 4
coarse sand) including 500*450 mm pre-cast R.C.C. horizontal
grating with frame complete as per standard design: With F.P.S.
132 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes
with collars jointed with stiff mixture of cement mortar in the
proportion of 1;2 (1 cement : 2 fine sand) including testing of joints
135 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse 0.00 0
sand : 10 graded stone aggregate 40 mm nominal size) all-round
SW/ RCC pipes including bed concrete as per standard design:
136 19.2.2 150 mm diameter SW/RCC pipe metre 40.00 1179.85 47194
137 19.2.4 250 mm diameter SW/RCC pipe metre 20.00 1590.55 31811
138 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm each 1.00 26861.90 26861.9
drybrick honey comb shaft with bricks and S.W. drain pipe 100 mm
diameter, 1.8 m long complete as per standard design With common
burnt clay F.P.S. (non modular) bricks of
class designation 7.5
TOTAL SANITARY WORK 77436572.55
Digitally signed by AVDHESH
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT Jhajjar.pdf
Tender Document
Scope of work.pdf
Tender Document
Techincal specification NG.pdf
Tender Document
Bill of Quantities.pdf
Tender Document
GCC with Amendments.pdf
Tender Document
List of Makes.pdf
Tender Document
IIT JHAJJAR TENDER DRAWINGS.pdf
Tender Document
87_Integrity Pact.pdf
Tender Document
87_SCC_R1.pdf
Tender Document
addendum-4e3ad3aa1cf9-87_Corrigendum_05.pdf
pdf • 0.40 MB
corrigendum-2432-87_corrigendum_04.pdf
pdf • 0.11 MB
corrigendum-2409-87_corrigendum_03.pdf
pdf • 0.30 MB
addendum-a95f368cd000-87_Corrigendum_02.pdf
pdf • 0.40 MB
addendum-d2616a0d9fae-87 Corrigendum - 1.pdf
pdf • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .