Memo. No. 1087 / NKDA /Engg- 36/ 2010(XV)-Guard Rail

Amount

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. The atencludes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. i) For roof truss works a) Span up to 12 Mtr

Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al./MS frame work with GIbrackets,ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving there arsurface of ACPsheet) with CPangles, cleats and strainless Steel screws for ming groves at the periphery of ACP panel.Such grooves filled with foamand silicon sealant etc. complete with all materials (but including thecost of siliconsealant), labour, scaffoldingandall other incidental charges complete in all respect as per specification and directionofEngineer-in-charge. (Modeofpayment isonfinishedsurface area of ACP) (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)

Rectro reflective Signage board and pesting reflective tape.

(b)Priming one coat on Steel or other surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A)Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand paperingetc.including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) (iv) Two coats (with any shade except white)

Add G.S.T. @18% from Serial 1 to 13

Add Labour Welfare Cess. @18% from Serial 1 to 13

TANCON ENGINEERING (BID ID -6170681)

A K INFRASTRUCTURE (BID ID -6171299)