Construction of 7Nos. of Shop Rooms (3.50x6.00M) infront side of Market Yard, Rayadurg of A.M.C, Rayadurg in Ananthapur District

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.

Filling of foundations with 2.36 mm HBG chips and below from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.

P.C.C (1:4:8) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work

Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers Rolling with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.

VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

For Plinth Beam

For Lintel Beam

Roof Slab 125 mm thick

Waist Slab 175mm thick

Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicing grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work.

Brick Masonry in C.M. (1:6) prop. Using 2nd class well burnt bricks from approved quarry free from warping, distortion cracks, chips, flows stones and nodules free from lime in accordance with IS-3495-1966 and screened sand including cost and conveyance of all materials to site, scaffolding charges of all materials, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers.

For Superstructure

Plastering with C.M (1:5) 12mm thick in single coat including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, seigniorage charges of all materials, including screened sand, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification

Ornamental Plastering to ceiling with CM (1:3), 12 mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, seigniorage charges of all materials, including screened sand, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete

Flooring with Supply of soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all sahdes and designs, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - acrylic emulsion paint - 2 Coats+1 coat primer

Supply and fixing of Rolling shutter made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end locks, mounted on specially designed pipe shaft of 50mmdia nominal bore MS B class pipe with brackets,plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete painted with one coat of approved steel primer, locks, ball bearings, all acessories etc., complete for finished item of work as per special spn: 108

Supply and fixing of 25mm dia 1.8mm thick P.V.C. Pipe (ISI MARK) outside in wall with all required accessorice including masonary work for light, fan and separate plug point with well seasone wooden deep box incluidng all labour charges etc., complete make:sudhakar/modi.ISI as per standard data.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Light point as per standard data.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Fan point as per standard data.

Supply and fixing of 6A 3 Pin wall plug socket with 6A switch control on a common switch board with earth continutity including wire leads, earth connections along with all labour charges etc., complete as per standard data.

Supply and fixing of 16A 3Pin /6A 3 Pin plug socket with indicator lamp and 16Amps fuse unit and 16 amps switch control (5 in one ) on decolom sheet Covered board including earth connection and all labour charges etc., complete on wall. as per standard data.

Supply and fixing of batten holder slanting holder in lieue. of ceiling rose of light point complete with all connections and all labur charges with 40W bulb (for new installation) as per standard data.

Supply and run of 2 of 22/0.3mm (1.5 Sqmm) FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete as per standard data.

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete as per standard data.

Supply and fixing of Distributions board with 20A single phase plug and socket in sheet steel enclosure with 10/16A/20A SP MCB including internal connections and all labour charges for suface/monty etc., complete

Supply and fixing of Electrical fan regulator on existing common switch board, including all internal connections and labour charges etc., complete

Supply and fixing of 20W LED Tube light luminaire (on existing light point connection) including all labour charges etc., complete

Supply and transportation of 45 W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete. Makes : As per list of recommended brands as category I.