Patch Reparing work of Electrical Installation work with Compound light and allied E.I of Balurghat District Hospital in the District of Dakshin Dinajpur.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] ( Store, Baranda). i) Avg 8 Mtr

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with Supplying and fixing 240 V 10-32A SPMCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection and Supplying and fixing 1No 415 V FPMCB Isolator on din rail of existing DBs and necessary connection. (Make- ABB / Seimens/ Legrand)

i) 4 Way Enclosure with 63A FP MCB Type Isolator as Incomer and 12 Nos SP MCB as outgoing.

i) 6 Way Enclosure with 63A FP MCB Type Isolator as Incomer and 18 Nos SP MCB as outgoing.

S & F double door 6 Way Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment . (Make- ABB / Seimens/ Legrand)

4 Way Enclosure (UPTO 160A ) with 100 A FP MCCB as Incomer and 4 Nos 63A TP MCB as Outgoing.

6 Way Enclosure (UPTO 160A ) with 125 A FP MCCB as Incomer and 6 Nos 63A TP MCB as Outgoing.

Supply & Fixing 240 V, 2 nos 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 2 nos 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (SP)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (PP)

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Computer Board)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20/25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. (For Power Plug)

i) 3 x 22/0.3 (1.5 sqmm) (SP)

ii) 2x2.5 sqmm+ 1x1.5 sqmm (Computer Board, 16A Power Plug)

iii) 2x4 sqmm+ 1x2.5 sqmm (AC). ( Sever Room)

iv) 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC [Matrimangal Change Over Connection]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. i) 2.5 sqmm

ii) 4 sqmm

iii) 16 sqmm

Supply and fixing of following 1.1 KV grade AL Service cables by catenary system on existing pole.( PWD approved make as per direction of EIC ) (Circuit House To ADM ( LR) Bunglow) i) 2 core 6 sqmm

Supplying and fixing MCB SS enclosure with IP- 20/30 protection, pwder coated provision for housing with 20A DP MCB, concealed in wall after cutting the wall & mending good the damages to original finish / on flat iron frame incl. painting, connection & provision for earthing attachment ( Make- Legrand ) (Compound).

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating..(Make- L&T) i) 100A L&T

Supplying and fixing 415V, TPN Change Over with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc .(Make- L&T). i) 125A L&T

S & F 240V Driver of existing Street Light with necessary interconnection as per direction of EIC. (Make Phillips- Driver of Cat. No. BVP192 LED132 CW NB FG A1 GR PSU )

Supply and delivery of following 1.1 KV grade XLPE AL armoured cables with submission of test report and warranty certificate for atleast 3 years from the OEM (Make; KEI, Polycab, Havells, RR Kabel//Havells). i) 2 Core 10 sqmm

(ii) 4 Core 35 sqmm ( Matri Mangal)

(iii) 4 Core 50 sqmm ( Matri Mangal)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (i) 2 Core 10 sqmm

(ii) 4 Core 35 sqmm

(iii) 4 Core 50 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. i) 2 Core 10 sqmm

(ii) 4 Core 35 sqmm

(iii) 4 Core 50 sqmm

Supply and fixing of 220V 9/10W LED bulk head fitting on wall /ceiling by screws etc (Make: Philips / Crompton or Eqivalent Make of Wipro / Bajaj /Havells)

S/F of Bobin insulator with Nut Bolt in the place of defective ones.

Supply and Delivery of 220V, 50 Hz A.C heavy duty exhaust fan complete metal body, (Make- EPC / USHA/ CROMPTOM). a) 30CM (12") 1420 RPM

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter. i) 30CM (12 Inch)

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For GI. i) 30 cm Exhaust fan (12")

Loop wiring by 3 x 1.5 sq. mm. PVC insulated Cu. Wire through PVC pipe from Loop Box to Fittings of the pole as per direction of EIC. (Polycab/Havells/RR Kabel)