SPL REPAIR TO BLDG NO MT 4 A DINING HALL AND PROVN OF SECURITY ENTRANCE GATE NEAR BLDG NO P 10M AT ALHILAL MIL STN

Amount

Dismantling of plain or corrugated sheeting any gauge,thickness,including Nainital or similar pattern roof covering etc complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated stee sheet 0.50mm thick of an olour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified.

Dismantling timber scantling 40 sq cm & over in section , any position in unframed work.

S&F mild steel Roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. ade Fe 410-W (Grade E-250)

S&F plates (plain or chequered) channels,square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed.

M&L Preparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L Preparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets of any thickness, including cover fillets.

S&F sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as directed by Engineer-in-Charge.

S&F clip-in false ceiling system with plain steel beveled edged tile (600mmx600mm) manufactured out of 0.70mm aluminium sheet having powder coating with 60 microns polyester paint on front side. Two sides of each tile shall be rised and piped and stopped to ensure positive engagement into the spring clip-in profile allowing for demounting of individual tiles. The rigid suspension system consists of rows of galivanized steel 0.50mm thick clip-in profile of size 38mm x 20mm and installed at 600mm c/c spacing to support the tiles clip-in profiles shall be suspended and jointed from galvanized steel 'C' channels of size 10mm x 38mm x 10mm with hold on clamps at spacing as specified by manufacturer. Suspension angles shall be suspended from the roof structure by GI ceiling brackets as per manufacturer's instructions and jointed to the 'C' channels. The tiles shall be held in place by pressure clips 'C' at spacing as per manufacturer's instructions. GI wall angle shall be used on wall angle shall be used on wall of size 20mm x 30mm x 20mm and 0.5mm thick with matching the colour with tiles all as manufacturer's specification/instructions and including necessary scaffolding all as specified and directed.

Demolition of brick work or stone /boulder masonry, built in CM, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified.

M&L Walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted , built in cement mortar 1:6 etc, complete all as specified

Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level)

M&L Plain cement concrete, M-10 (Nominal Mix) type C-1 (using 20 mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred / stopped ends etc, complete all as specified and directed.

M & L pre cast cement concrete type B-1 1:2:4 (20mm graded stone aggregate) in landing cover slabs for man holes and similar articles and set in CM 1:6

M&L 50mm thick, PCC M-10 (Nominal Mix), type C-2 (using 20mm graded crushed stone aggregates) as in plinth protection/ foot path finished even and smooth without using extra cement, complete all as specified and directed .

Taking down cement plaster incl tiles of any description on brick or stone or cement concrete walls incl raking out joints, hacking for key, scrubbing down with water etc, complete all as spfd and directed.

M&L Rendering 15 mm thick on stone masonry or other than fair faces of brick wall in CM 1:4 finished even and fair without using extra cement, complete all as spfd and directed.

M&L Rendering 10 mm thick on brick/stone masonry or other than fair faces of brick wall in CM 1:6 finished even and fair without using extra cement, complete all as spfd and directed.

M & L for peparation of newly plastered or unplastered surfaces of walls and applying two coats of distermpering walls with distemper oil emulsion and applying plaster of paris putty of 2 mm thickness over newly plastered wall surfaces including preparation of surfaces even and smooth complete all as specified and directed.

M & L for peparation of old plastered or unplastered surfaces of walls and applying two coats of distermpering walls with distemper oil emulsion and applying plaster of paris putty of 1 mm thickness over plastered wall surfaces including preparation of surfaces even and smooth complete all as specified and directed.

Material & Labour for appplying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new plaster surfaces of wall complete including preparation of surfaces of walls complete all as specified and directed by Engineer-in-Charge.

Material & Labour for appplying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old plaster surfaces of wall complete including preparation of surfaces of walls complete all as specified and directed by Engineer-in-Charge.

S&F Taking down chowkats or frames incl shutters (without taking off shutters from the frames) n.exc. 1.50 sqm each, and removing from site, complete all as specified and directed.

Taking down chowkats or frames incl shutters (w/o taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each and removing from site, complete all as spfd and directed.

S & F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed.

M & L Providing, cement concrete in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed all as specifed and directed.

S&F 2nd class HW (Sal / Hollock) factory made, plain framed, panelled shutters (two panels) 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35mm thick fitted to chowkats, complete all as spfd and directed.

S&F 2nd class HW (Sal / Hollock) factory made glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass or gauge, etc. (w/o sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutters S&F to chowkats, complete all as spfd and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fiixed in wood or steel/Aluminium frame of any description complete all as specifed.

M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc. 0.50 sqm in each pane, complete all as spfd and directed

S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. complete all as specified and as directed.

S&F Steel ventilator with top hung shutter incl hinges, steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed.

S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Dismantling floor, hearth wall tiling incld cement mortar bedding (but not backing) removing servicable tiles to store & rubbish off the premises.

M&L for Coloured Glazed ceramic tiles coloured in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 7mm as in skirting / dado etc and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for Non skid joint free (edge cut) coloured/ digital ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exc .18 sqm but not exc .38 as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 25mm thick as in leveling course of flooring & roof complete all as specified and directed.

M & L Colour chequered cement concrete tiles, machine pressed, factory made of size 300 x 300 x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

M & L coloured tiles of size 400mm x 400mm x 12mm laid in floor or wall over 15mm screed bed in CM 1:4 with grey cement and pigment, any shape and size complete all as specified and directed

Dismantling of 75 / 100 mm dia cast/PVC drain pipes, jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore dia, single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors etc, complete all as specified and directed.

S & F 75 mm bore PVC Bends (SWR)

S & F 75 mm bore PVC (SWR) T- Junction

S & F 75 mm bore PVC (SWR) T- Junction with ovel acces door

S & F PVC (SWR) floor trap of 75mm dia with grating including jointing with solvent cement

S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (including dismantling) complete all as specified and directed.

S&F in repair oval (of any colour as directed) counter wash basin of size 560 x 470 x205mm incl CP coupling and waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs waste pipe of polyethylene of low or high density of PVC, 32 mm dia, specified all as directed by Engineer-In Charge.

S&F PVC Connections 15 mm size with PTMT nuts of length 600mm complete all as specified.

S&F towel rail, 600 mm long of PTMT fixed with and including, CP brass screw and wooden/ plastic cleats (Min wt 190 gms) ,complete all as spfd and directed.

S&F soap dish any type fixed to plugs with chromium plated brass screws.

M & L for granite (of any size) tile 18 to 20 mm thick machine cut bedded and jointed grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone and including 15 mm thick screed bed in CM 1:6 and grinding and polishing complete all as directed by Engineer-in-Charge.

M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as directed by Engineer-in-Charge.

S&F in repair CP Swan Neck type Pillar taps fancy type 15 mm bore cast alloy with capasten head screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly-nutsscrewed complete all as spfd and directed

S&F in repair CP Swan Neck, fancy type mixer fixed to wall/slab platform 15 mm bore cast alloy with capasten head screwed down high pressure with long screwed shanks and fly-nuts screwed complete all as spfd and directed

S&F in repair 15 mm bore stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete.

Taking up or down 15mm bore steel tubing and connections for pipe complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections for pipe complete all as specified and directed.

S&F 15mm bore GI water tubes medium grade with all fittings and fixed complete to walls and ceilling or laid in floors all as specfied and as directed

S&F 20mm bore GI water tubes medium grade with all fittings and fixed complete to walls and ceilling or laid in floors all as specfied and as directed

Cutting chase, pinning in making good to faceing where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm.

M & L Prelaminated particle board of thickness 18/19 mm, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed by Engineer-in-Charge.

S&F wooden lipping specified and directed by Engineer-in-Charge.

S&F for continuous (piano) hinges, mild steel, bright finish or electrogavanised, width of flaps (when open) 40mm as specified all as directed by Engineer-In Charge.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16

M&L Plain cement concrete, Type C2, 1:3:6 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50 m in soft/loose soil and making good surface complete all as specified and directed

M&L Plain cement concrete, Type D2, 1:4:8 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete, complete all as specified and directed.

M & L Formwork to sides of fair finished flat surfaces sides of concrete sides and soffits of or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc

M & L Formwork to soffits of flat suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and as directed

M & L TMT bar 10 mm and over cut to length, bend to shape required including cranking, bending spirally for hoopings for cols, hooking ends and binding with ad including mild steel wire (annealed) not less than 0.9 mm dia.

M & L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups cut to length bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with and incl mild steel wiere (annealed) not less than 0.9 mm dia or securing with clips.

M & L RCC type M-25 (20 mm graded agg) as in roof beams, cantilevers, bressumers, lintels over 1.5 m span.

M & L RCC ( design mix ) type M-25 (20 mm graded agg) as in Slabs supported on walls,canopies, deck slabs and in shelves and the like

S&F 25 mm Stainless Steel drapery rod with a pair of stainless stell coated M S clamp to hold drapery rod and decorative attachment at one or both ends of drapery rod fixed in opening door/window (each opening n exc 1.50m contained with a pair of clamps and a pair of side ornament attachments) complete all as specified and as directed.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5m, including getting out the excavated soil and disposal of surplus exavared soil as directed within a lead of 50m as directed by Engr-in-charge

M&L for Peparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted, complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for RCC Nominal mix (1:2:4) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified.

M&L for form work to edges of pillars and columns for fair finished surface of concrete. complete all as specifed and directed

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specifed and directed

M&L TMT bars bars 6 to 8mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for column, hooking end and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed.

M & L 75mm Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in SUB-FLOORS, SUB-BASES, FLOORS AND PAVINGS, ETC. complete all as specified and directed.

M & L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size andpattern, finishing and sweeping extra sand; complete all as specified.

M &L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for Rolled mild steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. (Fe-410-W(Gde-E-250) quality A. complete all as specifed and as directed

S & F Aluminium composite panel (ACP) sheet 3mm thick aluminium layered any approved colour fixed to ceiling, walls or any position fixed as peer manufactured instructions including taking down old sheets complete all as specified and directed by Engineer in Charge.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, fan regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated FRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid Concealed conduit not less than 1.8 mm thick (ISI marked) with all accessories including bends, cross, elbows tees etc of suitable size including concealed MS pressed steel (Modular sunken box) terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and Modular cover plate as top cover (ISI marked) including 1.5 sqmm PVC FRLS insulated unsheathed copper conductor multi stranded cable for continuous earth conductor connected to common arth dolly , complete all as specifid and directed for the following :- Note- (a) Proper colour coding is to be followed as per IS specification. (b) Point wiring considered for Modular switches and sockets, rate of metallic sunken box and modular sheet cover plate and other connected accessories required for modular point wiring included in quoted rate. (c) Rate of modular switch and sockets will be paid seperately under relevant item.

One light controlled by one switch 5 Amp , SP , one way 240 volts

One Ceiling /Exhaust fan point controlled by one switch SP , one way, 5 Amp , 240 volts.

One multi pin socket outlet 5 amp independent .

One multi pin socket outlet 5 amp same board .

All as per the description of Serial Item No. 100.00 above but using 2.5 sqmm (nominal area) multistranded copper conductor cable & 2.5 sqmm size PVC insulated FRLS and unsheathed copper conductor cable FRLS for earth continuity (green colour) for one 3 pin socket outlet 15 Amp multipurpose independent point controlled by 16 Amps switch ,SP ,one way ,240 volts for socket ,complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F Modular Switch one way 6 Amp, one module 240 volts ISI marked complete all as specified and directed.

S&F Modular Switch one way 16 Amp, one module 240 volts ISI marked complete all as specified and directed.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F modular type fan step regulator 120w two module complete all as specified and directed.

Taking down old unsv c/f , Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed . Note- old unsv ceiling fan to be deposited in MES store yard.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete.

S&F LED Bulb 09/10 watt with provision of fixed in Lamp holder complete.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mt fixed to wall with 02 Nos Fl clamps made of 40 x 5 mm Fl, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including rend length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed

S & F Sheet metal enclousers, VTPN Distribution board 4 way 415 V, double door with 63A MCCB as incomer complete with rated bus bar and neutral link earthing fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML. No) not less than 25 mm dia confirming to IS 14930 (Part-1) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqrım FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upilo DB complete all as specified and directed (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 Sqmm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

Supply, laying and testing cable XLPE insulated screend PVC bedded, galvanised steel strip or wire armoured electric power cables (Heavy duty) 1100 V grade with stranded aluminium conductor of size 25 sqmm x 4 Core, laid in trenches or passing through pipe including taking down of existing cable/service connection of any type or size and removing from site to MES store for reuse if serviceable or for credit all as specified and directed and directed by Engr-In-Charge.

Exacavation in trenches not exceeding 1.5 m width and not exceeding 1.5 m depth and getting out for laying of pipe etc in any type of soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading levelling, watering and well ramming in layers, not exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the strating point in soft/loose soil complete all as specified and directed.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Brick, old size sub class 'B' laid in trenches with width wise along the alignment of the cable as protection complete.

S&F tube light grade galvanised with all fitting laid in trenches, fixed to wall and floor of 40 mm dia for cable protection complete all as specified and directed.

S&F tube light grade galvanised with all fitting laid in trenches, fixed to wall and floor of 25 mm dia for cable protection complete all as specified and directed.

S&F 35W LED Post top lantern complete accessories to be fixed on pole/wall with powder coated aluminium die cast and spun aluminium body with clear/opal diffuser. Suitable for landscape lighting with 5700K CCT & IP 65 complete all as specified and directed. Make: Polycab/Havells/wipro etc or make approved by Engr in charge.

S&F MCB DB, sheet metal enclosures single door SPN 02 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 32 Amps, 240 volts 'C' series 10 KA ,including connection with suitable size copper lugs complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm 2 core in service connections complete all as specified and directed.

M/S ER CONSTRUCTIONS (BID ID -3436166)