Providng and laying metlling and tarring works on Kalog to Shedri road (Road from jn. of LDCK to Jn. of NAS road Portion Km. 26/00 to 32/00). (SH- Providing and laying tarring in Km. 26/00 to 32/00).

Amount

Providing and applying priming coat with bitumen emulsion (SS-1) using bitumen distributor at the rate of 0.85 kg. (Zero point eight five Kilogramme) per sqm. on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specifications of clause of 502 including carriage of materials, plants/equipments by all modes of transportation with in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion pressure distributor @ 0.275 kg (Zero point two seven five Kilogramme) per square metre of the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specifications of clause 503 including carriage of materials, plants/equipments by all modes of transportation with in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Providing and laying 30 mm (thirty milimetre) thick bitumenous concrete with 100-120 PH batch type hotmix plant producing and average output of 75 tonne (Seventy five tonne) using crushed aggregates of specified grading premixed with bituminous binder @ 5.5 (Five point five) percent or mix and filler, including Zyco therm organno silane addetive @ 0.10% waight of bitumen, transorting the hot mix to work site lying with a hydro static paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled vibratory and tendom roller to achieve the desired compection as per MORTH specification No. 50 including carriage of materials, plants/equipments by all modes of transportation with in all leads and lifts and as per directions of The Engineer – in – Charge complete.

parveen