Loading
Loading…
Loading…
Tender Value
₹7.9 L
EMD Value
₹15,832
Closing Date
12 Oct 2026, 3:00 pm4d left
EE,DWS DIVISION KGT
EE,DWS DIVISION KGT
Lowering and lifting of submersible pump and motor with other allied works including fabrication and supplying of column pipe etc of different DTW SBDTW Innovative schemes within Chandipur RD Block under DWS Sub-Division, Kailashahar
2026_CEDWS_77490_1
DNIeT No_42/EE/DWS/KD/2026-27
Open Tender
Civil Works
Percentage
180 days
UNAKOTI
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
₹15,832
6 Oct 2026
6 Oct 2026
12 Oct 2026
6 Oct 2026
12 Oct 2026
6 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Labour charge for lifting of 20000/10000/5000 GPH capacity water lubricated vertical submerssible pump with motor in/c 80 ft column pipe assembly by heavy duty chain block as per direction of E.I.C | 80 | Nos | 3,000 | ₹2,40,000 |
| 2 | Labour charge for fitting fixing & lowering of 20000/10000/5000 GPH capacity water lubricated vertical submerssible pump with motor in/c 80 ft column pipe assembly by heavy duty chain block as per direction of E.I.C | 80 | Nos | 3,000 | ₹2,40,000 |
| 3 | Supplying and fitting fixing of following spare parts of approved quality suitable for submerssible pump and motor etc. as per direction of E.I.C
a) Full threaded nut and bolts 50 mm long | 100 | Kg | 80 | ₹8,000 |
| 4 | Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
i) 65 x 50 mm dia | 5 | Nos | 298.5 | ₹1,492.5 |
| 4.01 | ii) 80 x 50 mm dia | 5 | Nos | 403 | ₹2,015 |
| 4.02 | iii) 100 x 80 mm dia | 5 | Nos | 574.6 | ₹2,873 |
| 4.03 | iv) 80 x 65 mm dia | 5 | Nos | 404.5 | ₹2,022.5 |
| 5 | Providing & fabrication of column pipe including fitting fixing of G.I. flange by cutting the GI pipe ( conforming to IS : 1239 medium class ) into 3.05 mtr. long and welding the same with GI flange as per specification and direction of the Engineer-in-charge ( G.I. pipe will be provided by the agency at his own cost & risk).
i. For 50 mm dia G.I. pipe with 10 mm thick GI flange | 10 | Nos | 2,756.1 | ₹27,561 |
| 5.01 | ii. For 65 mm dia G.I. pipe with 10 mm thick GI flange | 10 | Nos | 3,323.7 | ₹33,237 |
| 5.02 | iii. For 80 mm dia G.I. pipe with 10 mm thick GI flange | 10 | Nos | 4,045.1 | ₹40,451 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.69 MB
DNIeT42.pdf
Tender Documents • 2.48 MB
BOQ_78875.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .