Construction of new Ghuntu Sub division office building and compound wall at Ghuntu under Morbi Circle

Name of Work: Construction of New Ghuntu Sub Division Office Building and

Compound Wall at Ghuntu under Morbi Circle

PARTCULARS OF ITEM Qty Rate Unit Amount

1 Excavation for foundation up to 1.5 M. depth. Incl. 150.00 155.77 Cmt

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter.

Lead in-(B) -Dense Or Hard Soil

2 Excavation for foundation up to 1.5 M. depth. Incl. 190.00 264.44 Cmt

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter.

Lead in-(C) -Hard Murrum

3 Excavation for foundation up to 1.5 M. depth. Incl. 150.00 275.31 Cmt

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter.

Lead in-(D) - Soft rock not requiring Blasting

4 Excavation for foundation up to 1.5 Mt to 3 Mt. 30.00 284.37 Cmt

depth. Incl. sorting out and stacking of useful

materials and disposing of the excavated stuff up to

50 meter. Lead in-(C) - Hard Murrum

5 Excavation for foundation for depth from 1.5 Mt to 30.00 298.86 Cmt

3 Mt. depth including sorting out and stacking of

useful materials and disposing of the excavated

stuff upto 50Mt. Lead in-(D) - Soft rock not

requiring Blasting

6 Filling available excavated earth (excluding rock) 440.00 135.56 Cmt

trenches, plinth side of foundation etc. in layer not

exceeding in 20 cm. in depth consolidating each

deposited layer by ramming & watering.

7 Filling in foundation and plinth with murrum or 740.00 298.79 Cmt

selected soil brought from out side with any lead in

layers of 20 cm. Thickness including watering,

pnumatic ramming and consolidating etc. complete

8 Providing and laying cement concrete 1:3:6 (1 118.00 3064.60 Cmt

Cement: 3-Coarse sand: 6 - Hand broken stone

aggregate 40MM nominal Size) and curing

complete excluding the cost of formwork in.-

Foundations and plinth.

9 Providing and laying cement concrete 1:2:4 128.00 3747.27 Cmt

(1cement : 2 coarse sand : 4 graded stone aggregate

20 mm. Nominal size) and curing complete

excluding cost of form work in : A-Foundation and

10 Providing and laying controlled cement concrete M 66.00 5401.21 Cmt

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (A) - foundation footings, Base

of Columns and mass concrete

PARTCULARS OF ITEM Qty Rate Unit Amount

11 Providing and laying controlled cement concrete M 32.00 8777.96 Cmt

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (D)- Columns, Pillars Posts and

Struts up to floor two level.-GF

12 Providing and laying controlled cement concrete M 65.00 6847.94 Cmt

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Plinth Beam.

13 Providing and laying controlled cement concrete M 28.00 6847.94 Cmt

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Beam, Lintel, chhajahs,

Shelvas etc. upto floor two level.GF

14 Providing and laying controlled cement concrete M 38.00 7223.22 Cmt

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Slab, for upto floor two

15 Providing and laying controlled cement concrete M 3.00 8086.03 Cmt

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Staircase upto floor two

16 Providing and laying controlled cement concrete M 6.00 8818.93 Cmt

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (D)- Columns, Pillars Posts and

Struts above floor two level.-FF

17 Providing and laying controlled cement concrete M 14.00 6888.91 Cmt

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Beam, Lintel, chhajahs,

Shelvas etc. above floor two level.-FF

18 Providing and laying controlled cement concrete M 10.00 7264.19 Cmt

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

complete work in (C)- Slab, above floor two level.-

19 Providing TMT Bar FE 500 D reinforcement for 26900.00 76.52 Kg

R.C.C. work including bending, binding and

placing in position complete upto floor two level

20 Providing TMT Bar FE 500D reinforcement for 3300.00 77.56 Kg

R.C.C. work including bending, binding and

placing in position complete above floor two level

21 Brick work using common burnt clay building 142.00 4369.66 Cmt

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (C) Fly Ash

PARTCULARS OF ITEM Qty Rate Unit Amount

22 Brickwork using common burnt Fly Ash bricks 120.00 4648.59 Cmt

having crushing strength not less than

kg./Sq.Cm. in Super Structure up to floor two level.

in Cement Mortar 1:5 (1- Cement : 5 -fine sand)-GF

23 Brickwork using common burnt Fly Ash bricks 52.00 4692.26 Cmt

having crushing strength not less than

kg./Sq.Cm. in Super Structure above floor two

level. . in Cement Mortar 1:5 (1- Cement : 5 -fine

24 Half Brick masonary in common burnt Fly Ash 106.00 697.30 Smt

building bricks having crushing strength not less

than 35 Kg. / Sqmt. in cement mortar 1:4 (1-

Cement : 4-Coarse Sand) in Super Structure up to

floor two level

25 Providing 15 mm. Thick cement plaster in single 800.00 178.61 Smt

coat on both sides Brick/concrete walls for interior

plastering up to floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

26 Providing 15 mm. Thick cement plaster in single 400.00 202.27 Smt

coat on both sides Brick/concrete walls for interior

plastering above floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

27 Providing 10 mm. Thick cement plaster in single 250.00 159.93 Smt

coat on both sides Brick/concrete walls for interior

plastering up to floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

28 Providing 10 mm. Thick cement plaster in single 75.00 183.59 Smt

coat on both sides Brick/concrete walls for interior

plastering above floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

29 20 mm. Thick sand faced cement plaster on walls 1700.00 312.56 Smt

up to height 10 meters above ground level

consisting of 12 mm. Thick backing coat of C.M.

1:3 (1 cement : 3 sand) and 8 mm. Thick finishing

coat of C.M.. 1:1 (1 cement : 1 sand) etc. complete.

30 Applying general insecticide pest control treatment 350.00 90.72 Smt

to floors, cupboards etc including labour materials

etc. complete. Using Imidacloprid 30.5 SCas Per IS

6313 part -II( (0.075% concentration by ss) is

recommended 10.5ml chemical diluted with 5 liters

of water application 0.5 litre chemical /Sqm of

surface is recommended as per I.S.

31 Providing Cement vata 10 x10 cm size quarter 110.00 24.04 Rmt

round in cement concrete in C.M. 1:1 including

neat cement finishing watering etc. complete.

PARTCULARS OF ITEM Qty Rate Unit Amount

32 Providing and laying Broken China Mosaic 265.00 771.98 Smt

flooring for terrace using 12 mm to 20mm broken

pieces of glazed tiles to be laid over cement mortrar

1:3 to plain or slope and to be tampred to bring

mortar creme out up to surface using white cement

including rounding off junctions and extending

them up to 15cm along the wall, clearing with

water and oxalic acid etc. as directed.

33 P & L 24" x 24" vitrified 8 mm thick tile flooring 295.00 1461.92 Smt

over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing

on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

34 Providing and laying coloured glazed tiles of he 165.00 1473.50 Smt

size 300mm x 200mm x 8mm / 300mm x 450mm x

8mm/ larger size as approved by EIC in flooring,

skirting, risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-Cement : 3-Coarse sand) &

jointed with white cement slurry etc as directed by

35 Providing and laying Granite stone slab flooring 85.00 2926.42 Smt

over 18mm to 20mm average base of cement

mortar 1:6 (1 cement : 6 coarse sand ) or L.M.

1:1.5 (1 lime putty : 1.5 coarse sand ) of fixing in

sill and jamb and laid and jointed with gray cement

slurry or jointing with necessary bonding Chemical

including rubbing and poishing complete. (b)

Granite stone 18mm thick 1 side polished

36 Providing and laying polished kotah stone slab 62.00 1003.83 Smt

Flooring over 20 mm (Average ) thick bases of

cement mortar 1:6 (1- cement : 6 coarse sand ) or

LM 1:1:5 (1 lime putty : 1.5 coarse sand ) laid

over and jointed with grey cement Slurry mixed

with pigment to match the shade of slab including

rubbing and polishing etc. completed (A) 25mm

37 Providing & laying 20 to 25mm thick, both faces 150.00 953.10 Smt

polished kotah stone with all edges machine cut

up to 600/450mm width and of required length

(only one piece to be used ) of approved quality for

cupboard shelves including fixing the same in

masonry wall by cement mortar in three sides

including curing etc. complete as directed by E.I.C

PARTCULARS OF ITEM Qty Rate Unit Amount

38 Providing , Fixing & Fitting fully glazed, partly 11.00 4116.00 Smt

glazed Single/Double leaf anodized /aluminum

powder coted(of approved shade) door using

extruded section fabricated by standard

manufacturers with framing 63.50 x 38.10 having

wt 1.094 Kg pre Rmt rectangular section & door

shutter made from with frame vertical size 44.45 x

47.62mm having wt 1.505 Kg per Rmt and

horizontal size 63.50 x 38.10mm and bottom rail

size 101.60mm 44.45mm having wt 1.60 Kg/M

using 5 mm thick “TRIVENI” or HB4 plain/colour

glass/4 Acrylic Sheets/ 12 mm Board with glazing

deep rubber gasket with locking arrangement of

GODREJ LOCK with all fixtures & fastening of

anodized section with aluminum beeding without

floor mounted door closer etc. completed.. Rates

are with all labours and material as per drawing

and as directed.

39 Providing, & fixing hot pressed phenol bonded, 20.00 3675.00 Smt

exterior type solid flush door 35mm shutter made

by approved brand & as per I.S.I. standard with

water resisting plywood facing and 1mm thick

laminated sheet on both side of door & teak wood

leaping all-round including 100X75mm. teak wood

frame.If necessary with glass looking window with

T.W. batten and polishing /Colour .Rates are

without fixtures & fastening but with 3 NO. of

100mm. long butt or parliamentary hinges on each

flap of double shutter & 150mm. long hinges for

single shutter and 3 NO. of M.S. flat hold fast

grouted in C.C. (1:2:4) on each side of frame,

coats of oil painting of approved shades make etc.,

complete as per drawing & as directed by E.I.C.

40 Providing and fixing FRP frame 100X50 mm and 19.00 2354.22 Smt

28 mm thick FRP depressed pannel shutter having

extra reinforcement on sides and edges and in Gel

coat finish.The core of the shutter & frame is to be

filled up with injected fire retardent grade

polyurethane foam done in situ along with

embedded wooden pieces for stiffening and also for

taking hinges and all fixures. The whole FRP

Frame and shutter is to be water proof, weather

proof, termite proof and resistance to mild

acid/alkali.Rates are to be inclusive of S.S. hinges

with necessary screws and allumunium fixtures &

fastening & fastener sleeve.

PARTCULARS OF ITEM Qty Rate Unit Amount

41 Providing and fixing window having extruded 33.00 3646.00 Smt

aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm

x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @

Wt. 1.06 Kg/mt with sliding shutters of horizontal

membersize 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x

18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with

mosquito net With good quality as directed by EIC

shutter of same size to be fixed in Three track with

5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing

to frame as per details etc_Alluminium windows

Three track wirh Mosquito Net

42 Providing and fixing standared extruded of 2.00 1163.92 Smt

alluminium section of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt. 0.643 kg per

mt with colour Powder Coated alluminium frame

for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

43 Providing & fixing fittings in position Partly panel 22.00 2700.00 Smt

and Partly Glazed aluminium (alloy - HE - 9 WP )

frame partition using aluminium 'c' section in the

dimensions of 23.6mmx21.8mm to be used for top,

bottom and side ends aluminium 'H' sections in the

dimensions of 23.6x60mm outer dimensions to be

used for intermediate support, the vertical &

horizontal members to be joined and with

concealed aluminium angle cleat panel to be made

from 5 mm thick HB4 or "Triveni" make plain glass

fixed with glazing clip rubber gasket with

aluminium beeding of required size incl. all fixtures

& fastenings including providing anti glare sun

control film as per drawings & details with rubber

on all four side for air tight fitting with all taxes

wastage labour etc completed as directed by E.I.C.

44 Providing & fixing MS plain grills of required 700.00 113.16 Kg

pattern to wooden frames of windows and gap

filling of wall etc. with MS flats or M.S, pipes at

required spacing and frame all- round square or

round bars with round headed bolts and nuts or by

screws with one coat red oxide & two coat of oil

paint (A) plain grill

PARTCULARS OF ITEM Qty Rate Unit Amount

45 Providing and fixing Stainless Steel text i.e. "નાયબ 50.00 1150.00 Sq.ft

કચેર ,પી વીસીએલ. " in 15" text, and "PGVCL"

logo in size of 26x25 inch with In 9" PGVCL text

in approved steel grade SS 304, latter with white

locor colour, front LG pink Vinyl pest including all

fastners and fixtures at give location as directed by

46 Providing and fixing Stainless Steel railing having 15.00 4484.00 Rmt

50 mm dia of 16 guage hollow stailess steel pipe

hand rail and 32 mm dia. 16 gauge Hollow stainless

steel pipe verticle support with 16 mm dia 16 gauge

SS pipes 2 rows as intermidiate members running

throughout with steel bol as cap at each end

including cutting, bending, welding & fabrication

the structure as per drawing in ASIS 304 grade of

Stainless steel etc. completed as per instruction of

47 Applying two coats of Birla or Asian acrylic lapy ( 1525.00 40.19 Smt

putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

48 Wall painting (two coats) with plastic emulsion 1200.00 83.53 Smt

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth in wall- GF + FF

49 Wall painting (two coats) with plastic emulsion 325.00 89.00 Smt

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth .-in Ceiling + GF + FF

50 Providing & applying 1 coat of approved make of 1700.00 28.00 Smt

primer paint including scaffolding etc., complete as

directed by E.I.C.

51 Finishing Wall with Weather Proof Exterior 1700.00 119.07 Smt

Emulsion Paint on Wall Surface (Two Coats) to

give an required shape even shade after thoroguhly

brushing the surface to remove all dirt, and remains

of loose powdered materials etc. complete

PARTCULARS OF ITEM Qty Rate Unit Amount

52 Providing and fixing rolling shutters of approved 7.00 3519.21 Smt

make made of 80MM wide M.S. laths inter-locked

together thorough their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arrangements for inside and

outside locking with push-pull operation with gear

system including the cost of hood cover and spring

etc. complete, of approved guage by EIC. [A]

Shutters having width below 3.5M.

53 Supply & fixing to doors & windows, ventilators, 12.00 324.58 No.

cup boards following fixtures & fastenings of

approved quality with wooden or metal screws,

nuts & bolts as directed or as per the drawing &

specifications. MS CP aldrop 250 mm long band

54 As per above but MS CP Latch aldrop 250mm long 12.00 150.00 No.

55 As per above but MS CP Tower bolt 200mm 12.00 50.00 No.

56 As per above but MS CP handle 150 mm long 24.00 75.00 No.

57 As per above but MS CP door stay double leg 24.00 40.00 No.

58 Providing & Fixing of ISI approved quality 5.00 925.00 No.

hydraulic door closer as directed.

59 Providing and Fixing Decorative laminated sheet of 34.00 5320.00 Smt

1.25 mm on 6 mm plywood to be fixed on new

wooden laminated partition with necessary frame

from 18mm plywood including cutting, and pasting

without damaging existing wooden laminated

partition with providing and fixing 12 mm glass on

opening to be fixed and cleaning with all labours

and material complete as directed by Engineer in

60 Providing ,erecting and fixing double coated ISI 2000.00 3.91 Litre

water tank of required capacity each with all

necessary fittings and connection etc. complete on

61 Providing laying and jointing in true line and level 30.00 71.93 Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

all materials.15mm dia.

62 As above but 25mm dia. 30.00 90.93 Rmt

63 As above but 32mm dia. 25.00 117.97 Rmt

64 As above but 50mm dia 30.00 193.73 Rmt

PARTCULARS OF ITEM Qty Rate Unit Amount

65 Providing & fixing to wall, ceiling and floor 10.0 50.00 335.69 Rmt

Kg. /cm2 working pressure polythene pipes of the

following outside Dia. Low Density, complete with

specical flange compression type fittings, wall

clipseted. including making good the wall ceiling

and floor.(G)110 mm.

66 Providing & Fixing Single Hole Table Top Wash 4.00 3330.76 No.

Basin on 24"X24" Granite Slab with C.I or M.S.

brackete & M. I . fisher union, P.V.C water pipe

with Connection from Stop Cock to Pillar Tap,

PVC Bottle Trap with Connection 32mm dia. C.P.

brassa waste coupling etc. Complete. Rate are

inclusive of all matreials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Table

Top Wash Basin Shall be as per the Approved

67 Providing & Fixing approved best quality I.S.S 2.00 100.00 No.

approved heavy PVC Half turn valve 15mm.dia.

68 Providing & Fixing approved best quality I.S.S 3.00 150.00 No.

approved heavy PVC Half turn valve 25mm.dia.

69 Providing & Fixing approved best quality I.S.S 3.00 200.00 No.

approved heavy PVC Half turn valve 32mm.dia.

70 Providing & Fixing approved best quality I.S.S 2.00 250.00 No.

approved heavy PVC Half turn valve 50mm.dia.

71 Providing & Fixing colour porcelain lip shaped 4.00 1893.57 No.

wall type long pattern URINAL PAN of approved

quality & make including waste coupling bends &

necessary outlet of 25mm.dia. G.I Pipe connections

including providing,flush cock, P.V.C. connection

etc., complete Size 550mm x 300mm

PARTCULARS OF ITEM Qty Rate Unit Amount

72 Providing & Fixing EUROPEOUN W.C with PVC 4.00 5888.00 No.

Flush Tank, Soft Seat Cover & intergal "S" Trap

including Jointing the Trap with Pan and Soil pipe.

Wall hung shall be fixed on S.S heavy duty rack

bolt having 16mm dia, 165mm length using Plastic

sleeve Make by Using Drill Bitt Only. Rate are

inclusive of all matreials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Wall

Hung & Flush Tank Shall be as per Below Make

List & Model Only.

1. Company- Johnson, Model- RUBY EWC

2. Hindware- Model- ACE COMBO/525228 (S-10)

3. CERA, Model- CONVENTIONAL PRO SF

73 Providing and fixing Kitchen sink with C.I. or M.S. 1.00 2303.62 No.

brackets, painted white including cutting holes in

walls and making good the same but excluding

fittings. © Vitreous China Sink.(i) 600mm x

450mm x 150mm size

74 Providing & fixing PVC SWR nahni trap IS 14735 5.00 568.89 No.

for drain -75mm diameterr with Jali of the

following nominal diameter of self cleansinf design

with CI scread down of higed grating including the

cost of cutting and making good the walls.

75 Providing and fixing S.W Gully trap with C.I 5.00 1234.57 No.

Grating brick masonary chamber and water tight

C.I cover with frame of 300MM x 300MM size

(inside) with standard weight. [I] Square mouth

traps. [B] 150MM x 100MM size 'P' or 'R' type.

76 Providing & Fixing Health Faucets (ABS Body). 4.00 565.51 No.

Rate are inclusive of all matreials, Labour &

Necessary Fittings etc. Complete as per Detailed

Drawings, Specifications and as per the Instruction

of Engineer In charge. The Model & Make of

Health Faucets Shall be as per the Approved Make

77 Providing & Fixing 15mm One way Bib Tap with 10.00 990.61 No.

Wall Flange. Rate are inclusive of all matreials,

Labour & Necessary Fittings etc. Complete as per

Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. The Model &

Make of Bib Tap Shall be as per the Approved

PARTCULARS OF ITEM Qty Rate Unit Amount

78 Providing B.B Masonry inspection chamber 5.00 4249.00 No.

(MANHOLE) of approved size including light type

approved C.I. Cover with frame, necessary

excavation, bottom concreting of B.B CC(1:4:8)

150mm thick/225mm thick B.B Masonry in

C.M(1:6) 12mm thick cement plaster in CM(1:3)

inside & to all exposed faces up to 300mm below

ground level, curing etc. including disposal of

surplus excavated earth up to radius of 500mt.

Including 3 coats of white or colour wash to all

exposed finished surface etc. complete as directed

by E.I.C.-300x300mm clear size

79 As per above but (c) 600 x 450mm clear size 5.00 5978.00 No.

80 Providing & fixing to wall, ceilling, and floor in 10.00 170.00 Rmt

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2 working

pressure polythene pipes of approved brand incl.

joining with approved solution & all fittings like

bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -75mm Dia.

81 Providing & fixing to wall, ceilling, and floor in 10.00 221.00 Rmt

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2 working

pressure polythene pipes of approved brand incl.

joining with approved solution & all fittings like

bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope - 90 mm Dia.

82 Providing & fixing to wall, ceilling, and floor in 30.00 314.00 Rmt

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2 working

pressure polythene pipes of approved brand incl.

joining with approved solution & all fittings like

bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -110 mm Dia.

83 Providing & fixing to wall, ceilling, and floor in 30.00 542.00 Rmt

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2 working

pressure polythene pipes of approved brand incl.

joining with approved solution & all fittings like

bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -160 mm Dia.

84 Providing & Fixing 600X450X6mm. thick size 4.00 850.90 No.

approved best quality of looking glass mirror Modi

or gold fish, mounted on 6mm thick ply with

edging with PVC angle patti as directed with fixture

85 P/F brass towel rail complete with C.P. Brass 4.00 610.32 No.

brackets fixed with C.P. Brass screws.-600 X20

PARTCULARS OF ITEM Qty Rate Unit Amount

86 Providing and fixing SS plated soap container with 4.00 196.00 No.

screws etc complete.

87 Providing of ACP sheet board with Acp and 30.00 885.00 Sq.ft

Redium textsign board on steel sheet as per design

and etc. complete as directed by E.I.C .

88 Providing & fixing of wall cupboard shutters using 53.00 3824.90 Smt

18MM plywood with Wood Framing size of 25 x

35 mm, decorative laminate of approved shade &

brand on front side and backside with white

laminated sheet. Including finishing with beading

patti and polishing the same. Fixing of door with

hinges, one number of magnet and door handle on

each door and one number of door lock and stopper

for locking arrangement good quality etc. Complete

including materials and labour as direction of

Engineer in charge.

89 Steel work welded in built up setions, framed work 1600.00 95.18 Kg

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint and two

coats of oil paint:- (A) In beams and joists,

channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to common

rafters and the like

90 Providing 2500mm internal diameter & 3.0 Mt. 1.00 52844.87 No.

Deep soak pit including excavation in all types of

soil & soft rock & B.B CC(1:4:8) bedding, 300mm

thick below masonry and 450mm thick B.B

Masonry in CM(1:6) up to 600mm height, 350mm

thick for further 600mm and 230mm thick for

remaining height honey combed, plastering in

CM(1:3) outside up to 1.5 Mt height and 100mm

thick RCC slab with 600x600mm C.I. HEAVY

duty cover with frame, with necessary

reinforcement as per design & C.I Vent pipe

1800mm long with B.B masonry pillar

350x350x450 plastered all around filling with 40 to

50mm size brick bats up to 1.5 Mt depth, including

16mm dia M.S’U’ shape steps, refilling including

disposal of the surplus excavated earth up to the

lead of 500mt. Radius including 3 coats of white or

colour wash to all exposed finished surface etc.

complete as directed by E.I.C.

PARTCULARS OF ITEM Qty Rate Unit Amount

91 Constructing 125 cm thick Controlled cement 386.00 709.00 Smt

concrete M- 250 Grade with Trimix & power

trowling sheet form work with M.S. channels,

srinking of fair hardness, Non oxidzing, Non

metalic, heavy duty floor hardner of FOSROC or

equivalent at the rate of 0.50 Kg./Sq.M. with

mm x 10 mm size groove cutting in concrete as

constructution joint and 12 mm thick premix

expansion joint at every 20 Meter lengthwith

necessary equipments, labors as per design etc.

92 Providing & Fixing Pre-Cast Rubber Dye 575.00 603.00 Smt

Interlocking concrete Blocks 60mm thick with

grade of concrete M-200 pnumatic compressed by

mechanically pressed and as per approved design

including 75mm sand layer for levelling and filling

the joint with sand in proper linr and level etc.

complete of approved manufacture as per the

direction of Engineer-in-charge

93 Providing and fixing pre-cast concrete Kerb stone 96.00 396.90 Rmt

of grey cement based concrete block 30 cm length,

30cm height and 15cm thick of M-250 grade

concrete as per approved design and including

excavation for fixing in proper line and level, filling

the joint with C.M. 1:3 ( 1-Cement : 3-Sand ) etc

complete as directed by EIC.

94 P&F 75mm dia G.I pipe as railing wherever 89.00 390.00 Rmt

requried including fixing the necessary hold fasts at

the end/middle and grouting the same inw all with

concrete as directed in line & level and 3 coats of

oil painting of approved shade & make etc.

95 P&F M.S conduit pipe gate/grill gate, form 600.00 111.00 Kg

appropriate secton and M.S.flat,square bar, M.S

sheet and grouting the pvot as per drawing and

design with necessary brackets, hold fasts, locking

arrangement on top & aldrop on both the side.

96 Providing and fixing G.I. pipe elevation ventilation 17.00 2178.00 Smt

zali for open duck as per drawing , section of

3"x1" for vertical member and 3"x1" horizontal

member at center of 6" c/c. with one coat of primer

and two coat of oil paint etc comp. As per drawing

and as directed by EIC.

PARTCULARS OF ITEM Qty Rate Unit Amount

97 P/F single layer waterproof gypsum board 8mm 20.00 600.94 Smt

thick of the make newgood group co.ltd or

equivalent & newgood group co ltd company

section using waterproof board of size 1220mm x

1830mm x 8.0mm suspended by GI suapender of

size 25mm x 3mm with intermediate channel of

size 18mm x 40mm x 0.80mm at 1220mm C/C

ceiling section of size 40mm x 35mm x 0.55mm at

457 mm center to center and perimetre chanel A of

size 20mm x 27mm x 30mm x 0.50mm at edges &

drops including paper tap sand sofit cleat anchor

fastener scoch bolt connecting cleat joining

compound top coat on ceiling including making

necessary opening for light fitting,diffuser

etc..compete as per detail drawing as directed.

98 Providing Quarter round edge moulded in trade of 98.00 58.65 Rmt

steps, jamb, sill etc. including rubbing and

polishing etc. Complete

99 Providing corrugated G.I. Sheets Class-3 roofing 100.00 656.00 Smt

fixed with Galvanied iron 'J' or 'L' hooks bolts and

nuts 8 mm. diameter with bitumen and G.I.L impet

washers filled with white lead complete excluding

the cost of purlins, raffers and trusses. (I) 0.50 mm.

100 Providing and fixing concertina coil fecing with 134.00 282.00 Rmt

punched tape concertina coil 600mm dia 10meter

openable length (total 90mt) having 50nos round

per 6 mtr length, upto 3 mtr height of wall existing

angle iron "Y" shaped placed 2.4 mt to 3mt apart

with 9 horizontal R.B.T. reinforced barbed wire

stud tied with GI staples and GI clips retain

horizontal, including necessary bolts or GI barbed

wire tied to angle iron, all complete as per direction

of EIC with reinforced barbed tape (RBT) spring

core (25mm thcik) wire of high tensile strength of

165 (cost of MS angle, CC block shall be paid

101 Drilling of bore well of 165 mm. dia. by machine in 150.00 264.00 Rmt

all kinds of soil, sand, clay, murrum, soft rock and

hard murrum, etc., complete, truly vertical with all

equipments and labours etc., complete as directed

by E.I.C. - up to 150 Rmt.

102 Drilling of bore well of 165 mm. dia. by machine in 30.00 302.00 Rmt

all kinds of soil, sand, clay, murrum, soft rock and

hard murrum, etc., complete, truly vertical with all

equipments and labours etc., complete as directed

by E.I.C. - above 150 Rmt.

103 Providing, fixing & lowering heavy duty 10KG / 20.00 516.00 Rmt

CM2 P.V.C. casing pipe suitable for 165 mm dia

bore well including necessary coupling connector,

solution etc. complete as directed by E.I.C.

PARTCULARS OF ITEM Qty Rate Unit Amount

104 Supplying and lowering 5 H.P. Three Phase. 1.00 27773.00 No.

submersible pump of approved brand with ISI mark

including lowering vertically, fitting with HDPE

pipe and top clamp and connecting cable with

motor and switch board as directed incl. all

necessary accessories and commissioning etc.

105 Providing and fixing best quality of H.D.P.E. pipe 175.00 115.00 Rmt

of approved ISS quality with all accessories

fittings, jointing etc., suitable for submercible pump

lowering in bore etc., complete as directed by

E.I.C. 40 mm dia. & 10 Kg/ cm2 pipe.

106 Providing and fittings of standard swith board with 1.00 4025.00 No.

Ampere and Volt meter ,fuse etc.suitable for three

phase submersible pump with metal/wooden

covered box with locking arrangements and fiiting

on wall as directed.

107 Providing and fixing of cable Laxson or equivalent 200.00 106.00 Rmt

brand 4 mm three core copper ISI approved make

incl. connecting with submersible motor and with

approved tap to HDPE pipe at 3.0 mt interval etc.

completed.- for Three Phase

108 Providing & Fixing top cap for 150mm.dia. pipe 1.00 662.00 No.

clamps, socket & other accessories required for

completing the job as directed by E.I.C.

Estimated Cost Section-I (CIVIL WORKS) in Rs.

109 Main Fire Hydrant Pump 1.00 53480.00 No.

LUBI/KSB/KIRLOSHKER make SITC of: Back

pull out type -Single Stage, Self Mriming,

Centrifugal Pump for Main Fire Pump with Electric

Motor, Meachanical Seal, Base frame and

Couplings. MOC:-Casing-CI, Impeller- Bronze,

Shaft- SS 410, Sleeve- SS410. Flow Capacity:

LPM Head: 30 to 35 mtr 2900RPM Pump shall be

capable of furnishing not less than 150% of rated

capacity at a head not less than 65% of rated head

he shut off head shall exceed 120% of rated head.

UOM:-Price Per Complete set of Pump + Motor +

PARTCULARS OF ITEM Qty Rate Unit Amount

110 Supplying & erecting approved control cubical 1.00 18623.00 No.

panel (Star - Delta) made from16 G. CRCA sheet

duly painted with epoxy powder painted inside and

outside with hinged doors and locking arrangement,

consisting of suitable size of ON- OFF isolator (AC

- 3/23 duty) main fuses, single phasing preventer

cum water level. Guard (Complete unit), Toggle

switch to by pass Single phase preventer cum

WLG, indicating lamps for R- YB phases, over

load relay, Automatic water level controller,

Ammeter & Voltmeter each with two way selector

switch incoming wires duly socket Crimped, Panel

to be erected on angle iron frame grouted on wall

as directed. Star Delta & main contactor, overload

relay, thermal / Electronic Star delta cutoff timer,

start - stop push buttons. The isolator overload

relay & contactors of L& T, Siemens, Redex or

Cuttler Hamer make only. Panel to be erected on

angle iron frame ground on wall.make-

111 Piping for Fire Safety Works Providing & Laying 24.00 1960.00 Rmt

'C' Class Heavy G.I. pipe laying. Supply,

fabrication, installation, hydro testing & painting of

above ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................100 mm diameter

112 Piping for Fire Safety Works Providing & Laying 1.00 1594.00 Rmt

'C' Class Heavy G.I. pipe laying. Supply,

fabrication, installation, hydro testing & painting of

above ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................80 mm diameter

PARTCULARS OF ITEM Qty Rate Unit Amount

113 Pressure Switch with Siphon Tube and Cock. 1.00 1780.00 No.

Supply, Installation and Testing of: Pressure Gauge

with Siphon Tube and Cock. MOC:-100 mm Dial-

Glycerin filled- Stainless Steel Body Pressure

Gauge with GI Siphon Tube and Brass Cock. Size:-

Dial: 100 mm Range: 0 – 15 Bar (kg/cm2) for

mm make-Danfoss/Orion/Indfos

114 Pressure Gauge with Siphon Tube and Cock. 1.00 1535.00 No.

Supply, Installation and Testing of: Pressure Gauge

with Siphon Tube and Cock. MOC:-100 mm Dial-

Glycerin filled- Stainless Steel Body Pressure

Gauge with GI Siphon Tube and Brass Cock. Size:-

Dial: 100 mm Range: 0 – 15 Bar (kg/cm2) for

mm make-Airmaster/H guru/Fiebig

115 NON- Return Valve Dual Plant Supply, Installation 1.00 10800.00 No.

and Testing of conforming to IS: 5312 complete

with rubber gasket, GI bolts, nuts, washers etc. as

required with necessary pipe fitments, hardware

and consumables. MOC:-Body: SS.plate SS

100 mm dia make-Zolato/Kartar/Osko

116 Fire Hydrant Landing Valve IS 5290 (Stainless 2.00 4265.00 No.

Steel (SS-304), ISI Marked): Supply, Installation

and Testing of: Fire Hydrant Landing Valve with

necessary pipe fitments, hardware and

consumables. Stainless steel 63 Female single

outlet type – “A“Hydraulic,Test : 21 Kgf/cm2

working parts, Water Test : Water tightness

14kgf/cm2, Flow Test : 900 LPM at 7 kgf/cm2,

MOC:-Body: Stainless Steel (SS-304), Working

Parts: Stainless Steel (SS-304), Coupling: Stainless

Steel (SS-304), Standard: -ISI Marked. Size:-63

mm (Flange End: NB 75 mm, PCD 160 mm)

MAKE : Newage/Aaag/Sangam

117 Fire Hose reel drum Ahemdabad type 25 mm x 30 2.00 3890.00 No.

m Supply, Installation and Testing and

commisoning: ISI 884. With Thermoplastic pipe

with SS Shuttoff Nozzle. Standard: - ISI Marked &

TAC Approved Hose. Size:-25 mm dia x 30 m long

. MAKE : Newage/Sangam/Fusion

118 Fire Hose pipe type B Is 636 and male female 4.00 3675.00 No.

coupling intenseous SS 304 with GI binding legth

15mtr complete set. MAKE :

Newage/Sangam/Fusion

119 Cabinet For Fire Hose (Hose Box)- Double door 2.00 3402.00 No.

Type Supply, Installation and Testing of: Fire Hose

Cabinet (Hose Box) suitable to accommodate 15 m

long fire hoses and 01 no. of nozzle. With Lock-n-

key facility. Wall Mounting Design. MOC:

Gauge MS Box with Powder Coating Standard with

Size 500mmX500mmX250mm:- Suitable MAKE :

Newage/Sangam/Fusion

PARTCULARS OF ITEM Qty Rate Unit Amount

120 Short Branch Pipe IS 903 Conforming Nozzle. 2.00 1780.00 No.

Supply, Installation and Testing of: Short Branch-

pipe Nozzle. MOC: Stainless Steel (SS-304).

Standard: ISI Marked, Heavy Quality. Test :

Kgf/cm2 No. MAKE : Newage/Aaag/Sangam

121 Supply Installation and commisioning of 25mm 2.00 1780.00 No.

Brass Ball valve for connection of hose reel

thermoplstic pipe make-Zolato/Venus/Sant

122 Butterfly Valve 100mm Dia IS 13095 1.00 7640.00 No.

Providing fixing testing and commissioning of SS.

Butterfly valve of class PN 1.6 rating of following

sizes. dia, Sant brand.(I.S.I) MOC:-Body: SS, Disk:

SS, Seat: Nitrile.Make Zolato/Kartar/Osko

123 Fire Service In-let (In-let Connection for Fire 1.00 3652.00 No.

Brigade)-2 Way Type. Supply, Installation and

Testing of: Fire Service Inlet with necessary

hardware and consumables. MOC:-Body: Heavy-

uty CI. Couplings/NRV:SS Standard: -Made As per

IS Standard- Heavy duty quality. Size:-Couplings:

63 mm, 100 mm E-table Flange End .MAKE :

Newage/Sangam/Fusion

124 Providing, Installation and Testing Fire 4.00 1825.00 No.

extinguisher IS 15683-2006 ISI marked BIS with

Peso 3 years ABC powder type 6 Kg. Supply,

installation and testing of ABC powder fire

extinguisher necessary hardware and consumables.

Stored pressure mechanism. Charged with MAP-

50% (ABC) Dry powder. with wall mounting

clamp.Make -V Safe/ Kanex /Ceasefire

125 Providing, Installation and Testing of Fire 5.00 4275.00 No.

extinguisher - CO2 Gas type 4.5 kg. Supply,

installation and testing of CO2 Gas fire

extinguisher with necessary hardware and

consumables. Standard - Confirming to IS:15683-

2006 with ISI mark with Peso 5 years certified.

Make - V-Safe/Kanex / Ceasefire

126 Providing and fixing AUTOGLOW Signages in 10.00 185.00 No.

Block / Small Letters of Specified Sizes: as per

design and requirement as directed by EIC.

127 Providing and fixing, testing and commissioning of 1.00 16890.00 Job

Conventional Fire Alarm control panel for G+1

building for 2 zones with complete wiring feeting

required as per engineer insruction

128 Providing and fixing, testing and commissioning of 4.00 1456.00 Job

Hooter cum strobe sounder with wiring complete

129 Providing and fixing, testing and commissioning of 4.00 1230.00 Job

Manuel Call point with wiring complete fittings.

130 Making of hole by core cutting in concrete member 4.00 700.00 No.

or masonary wall of diameter 0 to 200 mm as per

requirement including all man material and charges

of core cutting machinery as directed by EIC

PARTCULARS OF ITEM Qty Rate Unit Amount

131 Charges for administrative consulting for obtaining 1.00 85000.00 No.

Fire NOC from Local Body and providing fire

system annual maintenance contract with all the

requried docuemnts and process & mockdrill,

awarness traning for staff as per rules of fire at

every 6 months for three year as per GOG norms.

Estimated Cost Sectoin-II (FIRE SAFETY WORKS) in Rs.

132 Point wiring for Light / Bell with 2-1.5 sq.mm & 179.00 449.45 Pt.

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat III

133 Point wiring for FAN with 2-1.5 sq.mm & earth 25.00 629.23 Pt.

wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete cat-III

134 Point wiring for on board Looped Plug with 6A 36.00 241.39 Pt.

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with

following type accessories cat-III

PARTCULARS OF ITEM Qty Rate Unit Amount

135 Point wiring for Two Way Controlled Light Point 1.00 560.55 Pt.

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches

and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat iii

136 Providing following type of Modular Type 7.00 200.99 Ea.

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge (3) Two

Pin/RJ-11 Telephone Socket [B] For Two Gang cat-

137 (7) Blank Plate Single Cat iii 57.00 24.24 Ea.

138 (8) Computer RJ-45 socket Cat iii 21.00 153.52 Ea.

139 (9) 16 Amp. SP one way switch cat-III 4.00 172.71 Ea.

140 (10) 6/16Amp. Universal socket cat-III 8.00 190.89 Ea.

Modular MCB Switch cat-III

142 Providing and erecting ISI mark Medium class 380.00 32.32 Mtr.

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (b) 25 mm

143 Providing and erecting Mains with 1.1 KV grade 70.00 59.59 Mtr.

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid

PVC pipe and accessories (a) 2 wire 1.5 sq. mm

145 providing and erecting Mains with 1.1 KV grade 138.00 107.06 Mtr.

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (a) 2 wire 4 sq. mm

PARTCULARS OF ITEM Qty Rate Unit Amount

148 providing and erecting Mains with ISI marked, 132.00 53.53 Mtr.

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs,

nuts and bolts if required.(e) One wire 6.00 sq. mm

149 (h) One wire 25.00 sq. mm 2.00 225.23 Mtr.

150 Supplying & erecting approved make Telephone 121.00 19.19 Mtr.

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming

to C-DOT erected in existing pipe. of following

size of conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs

151 Supplying & erecting approved make LAN cable of 1218.00 45.45 Mtr.

following size in existing pipe as per direction [C]

152 Providing & erecting main Distribution (MDF) 1.00 949.40 Ea.

indoor type, back mounted frame as per DoT

standard approved with krone strips (a) Suitable for

153 Providing & erecting Switch board for Computer 21.00 1081.71 Ea.

or electric apparatus consisting of following

modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white

front plate, modules erected with necessary

connections as directed 1 no. 6A/16A universal

plug-switch combined. 3 nos. 6A Switch 3 nos. 6A

For Modular Type Accessories cat-III

154 Decorative call bell Ting-tong box type 250 volts 3.00 68.68 Ea.

complete erected

PARTCULARS OF ITEM Qty Rate Unit Amount

155 Supplying and erecting LED indoor fittings with 48.00 373.70 Ea.

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power

Factor more than 0.9, THD < 15%,CCT 3000 K to

6500K,Luminaire efficacy> 85 lumens/watt ,LED

driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between

the ranges shown.) (A) Tube Light with integral

driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet cat-III

156 Supplying and erecting LED indoor fittings with 3.00 220.18 Ea.

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips

complete.IP20 (i) 5-9 watts,Surge-2 KV Cat iii

157 (A) Square/ Circular shaped Surface/Recessed 98.00 427.23 Ea.

Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (ii) 15 watts, Surge-2

158 Providing and erecting Approved make Three 1.00 4442.99 Ea.

Phase & Neutral LT Heavy Duty Switch

Disconnector Fuse Unit Cubical type for panel

mounting complete with operating mechanism

suitable to operate on 415V A.C. , 23A duty With

HRC fuses of suitable load confirming to IS.

13947 (Part I & III). of following capacities.(c)100

PARTCULARS OF ITEM Qty Rate Unit Amount

159 Pproviding and erecting Approved make Four pole 1.00 6173.12 Ea.

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU

160 Providing and erecting Approved make Earth fault 1.00 4687.41 Ea.

Relay suitable to mount with inter connection

suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as

following along with shunt trip 220V AC. with all

internal connections & complete erected in existing

M.S.housing.. (1) 15 A -100 A , CT Ratio 1/100

161 Supplying & erecting approved make Four Pole 1.00 4785.38 Ea.

415V change over switch interior for panel

mounting with operating mechanism A.C.23 duty

confirming to IS for (B)63 A Cat-III

162 Supplying and erecting triple pole & neutral 440V / 1.00 1961.42 Rmt

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to

each bar, erected in existing cubical panel with

necessary connections. (A) Suitable for 100 Amp.

163 providing and erecting Miniature circuit breaker 53.00 112.11 Ea.

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark cat-III

164 Providing & erecting 240 V MCB double pole 18.00 295.93 Ea.

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity (B)

165 Providing & erecting 415 V MCB Four Pole for 25.00 668.62 Ea.

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (b)40 Amp.

PARTCULARS OF ITEM Qty Rate Unit Amount

166 Providing and erecting Sheet Steel powder coated 3.00 1492.78 Ea.

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company

of MCB to be used) suitable for(A) single phase

incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43)(iv)12 way

167 (B) three phase incoming and single phase 1.00 2339.16 Ea.

horizontal type outgoing Per phase isolation type

(PPI) (b) sheet steel double door (i)4 way

168 providing and erecting Approved make RCCBs 6.00 2235.13 Ea.

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed (ii)

40Amps. DP cat-III

169 Providing and erecting Annealed bare Copper wire 2.00 794.87 Kg

170 Supplying & erecting earth pit of minimum bore 3.00 4591.46 Ea.

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following type

of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for

long time Necessary test report must be submitted

by Agency. (a) For Electrical Installation up to

440V in normal soil, Length of pipe - 1 Mtr, Back

filling compound - 1 Nos Bag of 15 Kg.

PARTCULARS OF ITEM Qty Rate Unit Amount

171 Providing & erecting weather proof, dust & vermin 1.50 14902.55 Smt

proof, floor mounted front operated indoor type cubical

panel board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG

thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per requirements

& instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket, heavy duty end terminal connection,

danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder

coating. (The rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size. (B) The standard companies switch gear

shall be used and only manufacturers at CPRI approved

factory (i) with 350mm depth

172 Providing , erecting , fabricating the M.S. structure as 30.00 77.77 Kg

per requirement on site incorporating proper size of

M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with

erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering &

finishing complete.

173 Providing and erecting XLPE(IS:7098)(I)-88 ISI 10.00 217.15 Mtr.

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following

size of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq.

174 Providing and, fixing heavy duty flange type brass 2.00 75.75 Ea.

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for

following size of cables.(B) 3 & 1/2 core 35/50 Sq.

175 Solder less crimping type Aluminium lugs 2.00 15.15 Ea.

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

PARTCULARS OF ITEM Qty Rate Unit Amount

177 Providing & erecting Approved make Power 25.00 1948.29 Ea.

Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.

Hz 1200 mm sweep complete having 3blades with

aluminium blades with , canopy & 30 cm. down

rod erected with earthing.(Make shall be approved

by Engineer in charge))

178 Supplying and erecting 19 / 20 mm. nominal bore 17.30 108.07 Mtr.

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

179 Supplying & erecting fan hook box of 10 mm 25.00 108.07 Ea.

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary

180 Providing 2.5mm.thick laminated acrylic sheet to 25.00 18.18 Ea.

cover the fan hook or Fan box.

181 SITC of Digital / PCM / TDM EPABX System having 1.00 45398.49 Ea.

SMT design, system with flexible universal slots.

Inbuilt Auto attendant facility, Minimum 15 Nos.

conference, Analog extension line, Calling GSM,

E&M line, PRI / EI & VOIP program me through

Analog telephone digital key from Ethernet, public

address cord, shall have unrestricted simultaneous

dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-

Locking, Class of Service, Quick Dial-Single Digit

dialing of any two external number, Once only ring

device, Chairman / Secretary - Do not disturb Facility,

Power Down Mode, Hot Line, Hot Outward Dialing,

Day Night Mode, Auto Call Back, Barge-in, Call Pick

Up & Call Transfer, Call transfer while Ringing with

Voice Guide System, (DISA), Caller ID (CLI), CLI

Base ECF, CLI Base routing Internet Ready Port,

External Music Port, Call Budgeting, Call Most

Calculation (ASMDR), DID Direct Inverse Dialing,

External Music Input, Fax Homing, Global Directory

Printing with following capacities [Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ] [A] No of Extension 16, No of

Junctions 6, 8 Port IP Resource in-built, 4 Port Web

base Video Conferencing, No of expandable ports :

48, Operators Console - 01 Compatible : ISDN

182 Providing and erecting Standard Push button 7.00 311.08 Ea.

telephone (DTMF) Phones [[Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ]

PARTCULARS OF ITEM Qty Rate Unit Amount

183 Providing and erecting water cooler having storage 1.00 41342.33 Ea.

capacity 80Ltr. & cooling capacity 40 Ltr.per hour

@ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚ C within a hour, The

water cooler should be comprising of hermetically

sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating coil,

thermostats, relay etc. complete with necessary

inlet & outlet connection. The body of water cooler

will be made from Stainless Steel. ◦

184 Supplying & erecting 5 stage single reverse osmosis 1.00 13053.24 Ea.

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment

filter GAC filter, carbon filter suitable buster DC

pump capacity 80 psi, mention with 40 psi inline

type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH

capacity & erected as directed [B] 25 Ltr / Hr with

30 Ltr. Storage Tank

185 Supplying and erecting approved make panel 1.00 1275.63 Ea.

mounting type Digital Voltmeter having 3 digits

LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc

.with manufacturers calibration certificate.

186 Supplying and erecting approved make panel 1.00 1558.43 Ea.

mounting type Digital Ammeter having 3 digits

LED display, external CT operated, calibrated for

to 1000 Amps suitable to operate on 500 Volt AC

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate.

187 Supplying and erecting Ammeter / Voltmeter 2.00 317.14 Ea.

selector switch for 3 phase AC Supply 500 V on

existing panel board with necessary connections.

188 Providing & erecting L.T. Current Transformer 3.00 274.72 Ea.

with bar primary 50/5 to 1000/5 ratio 15 VA

burden erected in existing CRCA box duly secured

with insulating materials connected to the meter

189 Supplying and erecting approved make suitable 3.00 43.43 Ea.

panel indicator LED type lamp, lens cover,

complete erected with necessary connections.

190 Providing & erecting open well horizontal mono 2.00 15707.52 Ea.

block pump set with cast iron body, complete for

three phase submersible motor having [C] For 3 HP

3 phase open well horizontal mono block pump set

suitable for 85 LPM to 270 LPM @ 11 mtr to

mtr head suitable for 50/65 mm dia delivery pipe

PARTCULARS OF ITEM Qty Rate Unit Amount

191 Supplying & erecting approved make motor 2.00 7722.46 Ea.

control cubical panel (Direct - on - line) made from

16 G. CRCA sheet duly epoxy powder painted

inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF

isolator (AC - 3/23duty) main fuses, single phasing

preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller,

Ammeter, Voltmeter each with two way selector

switch incoming, wires duly socket crimped, main

contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted

on wall as directed. The isolator, overload relay &

contactors will be of L & T, Siemens or BCH make

only. (A) DOL up to 5.0 H.P.

192 Lowering of submersible motor pump set at the 2.00 856.48 Per

depth of following ,complete with required. Nos. Job

and size of casing pipes erected by means of proper

chain pulley block & pipe wrenches after checking

of threads of each pipe with coupling to take the

load of the pump set and pipe assembly filled up

with water(D)For Open well Horizontal

submersible pump set for sump well (i) 1 HP to

193 Providing and erecting ISI marked PVC insulated 30.00 104.03 Mtr.

PVC Sheathed Flat flexible Submersible copper

cable approved make of following Size.(B) 3 Core

194 Supplying of following size of HEAVY UPVC 2.00 359.56 Rmt

column pipe with coupler and wire lock [B] 50 mm

PARTCULARS OF ITEM Qty Rate Unit Amount

195 Supplying and erecting LED street light / Flood 15.00 4997.48 No.

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79

& LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(A)

Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with

over-voltage protection.(ii) above 48 to 60 Watts

Estimated Cost Sectoin-III (ELECTRICAL WORKS) in Rs.

Total Estimated Cost Section [ A = I +II + III ] in Rs …

Bidder's offer [B]

GRAND TOTAL [C = A +/- A*B ]

GRAND TOTAL [C = A +/- A*B ]

GST (CGST __% + SGST __%) [ D = C * GST% ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

Final offer in Rs.

Chief Engineer (Material)

PGVCL, Corporate Office, Rajkot