COMPREHENSIVE MAINT OF MODERNISED WATER SUPPLY (SCADA ) DISTRIBUTION SYSTEM INCLUDING ALLIED REPAIR / MAINT WORKS AT INS DRONACHARYA AND SMA RAMESWARAM UNDER GE FORT KOCHI

Amount

Comprehensive maintenance of SCADA based water supply pumping and distribution system including repairs, maintenance, servicing and operating of all PLC panels and all connected circuit and accessories as required for all the modernized water supply infrastructure as described below by authorized well trained and qualified technician of OEM or through authorised service provider of the OEM or any other agency dealing with the installation and maitenance of SCADA system having vast experience in the relevant field capable to maintain & operate the SCADA system round the clock at SMA Rameswaram under GE Fort kochi :- (a) Servicing and maintenance / repair and replacement of defective components / spare parts of PLC based control panels including all accessories such as modem, antenna, communication cable etc. installed at various pump houses and locations, OHTs and Master control station . Existing SCADA system of PLC -Make 'Mitsubishi',SCADA softwarre of 'Facory talk view' built by Rockwell Automation.

(b) Repair / maintenance by disconnecting, cleaning greasing for wear and tear complete servicing, lathing / metaling if required re-installing and commissioning as directed by Engr-in-Charge of all motorized and solenoid valves, Pressure Transmitters, Ultrasonic and magnetic level sensors etc complete. The scope of work covers for the following also:- (i) Any changes to the Programmable Logic Controller (PLC), e.g. Changes in ladder logic of programme, changes in operational timing, etc. (limited to the scope of items covered under this AMC) (ii) Any changes to the SCADA software, e.g. Changes in report format, changes in operational screens, creation of soft keys, (limited to the scope of items covered under this AMC) (iii) Submission of pass words,operator's manual,trouble shooting manual circuit diagram, schematic diagram and layout plan related to SCADA system required for smooth functioning & all as per Manufacturer's instructions. (iv) SCADA reports related to all the systems to be submitted/mailed to AGE / JE on every week with details of:- (a) Attending and completion of break down within the specified time frame (ie within 4 hours of reporting) & submitting records showing the date & time of reporting and completion. (b) Maintenance, repair and replacement of unserviceable spare parts as required at site with date and time of completion all as specified and directed by Engineer in charge.

(c) All the calls related to unserviceability / break down of the system should be attended with in 4 hours, if failed to do so, penalty charges of Rs 1000/- on each day shall be imposed until the system gets repaired for smooth functioning. (d) The quoted rate shall also inclusive of all the charges for the communications, i.e. 01 No BSNL broad band connection with static IP at SCADA room and GPRS enabled data cards / OFC used in all PLC based panel related to the scope of work.

All as per item no. 1 above but located at INS Dronacharaya under GE Fortkochi.

Repair , maintenance and servicing of SCADA server Make : HP, monitor Make : Samsung, Printer Make : HP Laser Jet P1108 all as directed including necessary updating, antivirus etc upkeep the service for the mentioned period. Note for Item No. 01 to 3 :- The components / spare parts to be repalced during the repair and maintanance shall be measured and paid as 'Supply Only' under respective items. However, cost of taking down the old one and fixing new spare parts and consumables such as grease, cotton waste etc shall be deemed to be included inthe rate quoted for Sl. item nos. 1 to 3 above.

Supply only single phase Preventer Model 1 : VSP D2. Make : Minilec cat part No. VSPD2(N) or equivalent in L&T/Schneider

Supply only Relay with base 4 C/O / 24 V DC. Make : IDEC cat part No.RS4S-D24 or equivalent in LEONE/OMRON

Supply only Relay with base 4 C/O 240V AC. Make : IDEC cat part No.RS4S-A220 or equivalent in LEONE/OMRON

Supply only LED Indicator Colour / Red / yellow / Blue/Yellow. Make : SCHNEIDER or equivalent in ESBEE/TEKNIC/TELEMECHNIQUE

Supply & Fix in repair 50 mm dia CI body foot valve including necessary connections complete all as directed by Engr in Charge . Make :- Zoloto / Orient / MMI

Supply only I/O module for Programmable Logic Controller. Make : Mitsubishi cat part No.NG2K Plus 24 V DC IP-8 DC 2417 or equivalent in Schneider/ABB

Supply only HMI 7 with PLC communication cable for Programmable Logic Controller. Make : Mitsubishi cat part No. GS2107WTBD or equivalent in /Renu/L&T

Supply only water Level Controller PCB-10 Level. Make : RDS/Splash/ICS

Supply only water Level Controller PCB-5 Level. Make : RDS/Splash/ICS

Supply only push button with LED Indicator - 240 V A.C. Colour / Red / yellow / Green. Make :SCHNEIDER or eqivalent in ESBEE/TEKNIC/TELEMECHNIQUE

Supply only motorized solenoid Valve 25mm, 230 VAC. Make : JOHNSON CONTROLS cat part No.APC-VLV-2251V1 or eqivalent in ROTEX/AVCON/DANFOSS

Supply only solenoid Valve 10mm 230 VAC. Make : AVCON cat part No. 9210B61/54/BN/BSP or equivalent in JOHNSON CONTROLS/ROTEX/DANFOSS

Supply only Magnetic Level switch. Make : RDS cat part No. MG03 or equivalent in CRYSTAL/MAHALAXMI

Supply only of Pressure Transmitter 0-16 bar pressure, output 4-20 mA Make : SIEMENS cat part No. P220 7MF 1567-3CA00-1GA1 or equivalent in Danfoss/Indfoss

Supply only Electric motor working on 230 V AC supply suitable for actuator of following size.

50/80 mm dia. Make : RITETORK cat part No. RT-3 or equivalent in EMTORK/ROTORK

100 mm dia. Make : RITETORK cat part No. RT-5 or equivalent in EMTORK/ROTORK

150 mm dia. Make : RITETORK cat part No. RT-10 or equivalent in EMTORK/ROTORK

200 mm dia. Make : RITETORK cat part No. RT-20 or equivalent in EMTORK/ROTORK

250 mm dia. Make : RITETORK cat part No. RT-40 or equivalent in EMTORK/ROTORK

Supply only Electrical actuator working on 230 V AC supply for following size.

(a) 50 mm dia. Make :RITETORK cat part No. RT-3 or equivalent in EMTORK/ROTORK

(b) 100 mm dia. Make : RITETORK cat part No. RT-5 or equivalent in EMTORK/ROTORK

Supply only Butterfly valve for the following size. Make : L&T / AUDCO/VIRGO/INTERVALVE

Butterfly valve of size 50 mm dia.

Butterfly valve of size 80 mm dia.

Butterfly valve of size 150 mm dia.

Butterfly valve of size 100 mm dia.

Butterfly valve of size 200 mm dia.

Butterfly valve of size 250 mm dia.

Supply only Capacitor for Actuator suitable for 50 / 80 / 100 / 150 / 200 / 250 mm dia Motorized Butterfly Valve. Make: CTR cat part NO. MPRC/S02 or equivalent in Keltron/Modulus

Supply only Resistor for Actuator suitable for 50 / 80 / 100 / 150 / 200 / 250 mm dia motorized Butterfly Valve. Make:VARITURN cat part No. VHS100/200 or equivalent in Raatronics/Keltron

Supply only Hand Wheel for Actuator suitable for following size Butterfly Valve for 50 / 80 / 100/150/200 / 250mm dia.

Supply only Limit switch for Actuator suitable for 50 / 80 / 100 / 150 / 200 / 250 mm dia motorized Butterfly Valve. Make:CHERRY cat part No. D449-Q1RA or equivalent in Schneider/ L&T

Supply only Cast Aluminum Top cover for Actuator suitable for fallowing size Butterfly Valve for 50 / 80 / 100/ 150 / 250 / 200mm dia.

Supply only SMPS input 230 V/AC, Output 24V DC. Make : NHP cat part No. NF824V5ARM or equivalent in Telemechnique/ Schneider

Servicing of Motorised Butterfly Valve of following size i/c removing, cleaning, greasing, checking for wear and tear. Note : Spares if needed are not included in the above.

50 /80mm dia.

150/100 mm dia.

200/250 mm dia.

Supply only 5 pair 0.5 sqmm armoured communication cable with copper conductor. Make : POLYCAB/Havells/Finolex

Supply only 2 core 1.5 sqmm armoured cable with copper conductor. Make : POLYCAB/Havells/Finolex

Supply only 4 core 1.5 sqmm armoured cable with copper conductor. Make : POLYCAB/Havells/Finolex

Supply only 6 core 1.5 sqmm armoured cable with copper conductor. Make : POLYCAB/Havells/Finolex

Supply only Ultrasonic Level Sensor range 0-5M. Make : Banner/Siemens/Krohne Marshal

Supply only GPRS Modem 4G Rating DC5, 32V,650 mA . Make : Maestro cat part No. M100 or equivalent in Motorola/Elpro

Supply only 9DB Antenna GPRS Modem. Make: Pantagon Satelite Cat part No. 9db PS01GSM/9RM 3mtr Cable or Equivalent make

Supply only UPS Battery 12 Volt, 42 Ah - SMF. Make : Exide/Luminous/Amron

Supply only UPS Battery 12 Volt, 7 Ah - SMF. Make : Exide/Luminous/Amron

Supply only UPS Battery 12 Volt, 26 Ah - SMF. Make : Exide/Luminous/Amron

Supply only LT CTs of ratio 75 / 5 as per existing one.

Supply only three phase multi function power line transducer. Make : Adept/L&T/Schneider

Supply only MCB 4 Pole 6 Amps, AC 415 Volt. Make : SCHNEIDER cat part No. NBKRA104PC06A or equivalent in L&T/ABB

Supply only MCB 2 Pole 6 Amps, AC 230 Volt. Make : SCHNEIDER cat part No. A9N2P06C or equivalent in L&T/ABB

Supply only Media converter-Wavelength (nm) : 850nm,Max distance :550M,Mode : Multimode. Make : Dlink/Teranet/TP-Link

Supply only 6020 Ethernet Adopter for static IP Address. Make : Mitsubishi/Modbus

Supply only 5port Ethernet Switch Make: Dlink/Teranet/TP-Link

Supply only 850 VA, 600W UPS. Make : APC/Luminous/Numeric

Supply only 3.5 KVA, 48 Volt inverter. Make : APC/Luminous/Numeric

Supply only Reagent solution bottle set for Residual-chlorine-Analyzer

Supply only Residual-chlorine-Analyzer . Make : HACH/XYLEM/ABB/E+H

Supply only 2 KVA, 24 Volt inverter. Make : APC/Luminous/Numeric

Supply only Mimic panel converter (RS232/CMOS to RS 422/RS 485 Converter) Make : Renu/Dtech

Supply & fix in repair 100mm dia CI body foot valve including necessary connections complete all as directed by Engineer-in-Charge. Make: Zoloto/Orient/MMI.

Supply & fix in repair 80mm dia CI body foot valve including necessary connections complete all as directed by Engineer-in-Charge.Make: Zoloto/Orient/MMI.

M&L for taking down motorised operating valve (SCADA system) from existing pipe line when and where as directed by disconnecting all connected cables with trained manpower without any damage and keeping in safe custody and refixing of the same place when and where as directed using all necessary connectors nuts bolts and operating testing complete to the satisfaction of Engr-in-charge.

Excavation in trenches, n exc 1.5 m wide and n exc 3.00 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil all as specified and as directed.

M&L sand cushioning in trenches using fine aggregate for cable cushioning all as specified and as directed. Note : Thickness of sand cushioning after punning down will be measured and paid.

Supply and lay sub class "B" burnt bricks, as in cable protection, laid length of brick perpendicular to length of cable complete all as specified and directed.

M & L Returning and filling in of soil including spreading leveling, watering and ramming in layers not exceeding 25 cm complete all as specified.

M & L Removing excavated soil to a distance not exceeding 50 meter and not exceeding 1.5 meter above the starting point, and depositing where directed complete all as specified.

BOB ENTERPRISES

CONSYST TECHNOLOGIES INDIA PVT LTD