NIT No-03/PHE(EM)/BMC (3rd Call) Dated-03/08/2026

S & F sintex make SMC/FRP waterproof type looping cable box on newly erected pole and in place of damaged pole boxes having size 240 x 130 lace of damaged pole boxes having size 240 x 130 x 95 mm depth, hinged front cover & kit –Kat fuse unit 1 no. NL, on insulator, 1 no. 4 Way bacelite connector, provision for 2 nos. compression brass gland for upto 3 core 16 sq.mm PVC, AI cable and having lined with rubber gasket front cover with brass machine screw, etc. earthing terminal with log on steel tubular pole near base including supply & fixing suitable pole near base including supply & fixing suitable MS clamps with nuts & bolts etc. complete in all respect as per direction of E.I.C

Earthing the steel tubilar pole with 19 mm dia x2.5 mtr. Length G.I rod & 1no. 4 SWG G.I wire up to 4mtr. Length 15 mm dia x 65 long G.I bolt, double nuts & washer including supply of all meterials as per direction of E.I.C.

Wiring in 1.1 KV grade single core standerd 'FR' PVC insulated & unsheathed copper wire ( Brand approved by EIC) of following sizes in 25mm PVC casing -capping(Precision make) incl. necy.PVC clips, Fittings etc. 2x22/0.3 (1.5 sqmm)

Extension of existing 2-4 core, 6-16 sq.mm PVC AI cable about 1 Mtr. Length each by jointing with AI suitable ferrule by crimping method for connection with the pole box including preparation of the bed by necessary excavation of soil etc. complete (a) cable; 4 mtr. (b) heat shrinkable tube: 2 mtr. (c) 1st dia PV Pipe: 4Mtr. (d) AI ferrule: 4 nos. (e) Kacha rubber & adhesive tapes etc.

Providing C.C.(6:3:1) muffing 600mm x 600mm x 760mm in size or equivalent size of cylinder muffing above ground level around the (plate) base complete with 3mm thick neatly finished cement plaster all round the muffing & painting complete.

Earthing with 80 mm dia G.I. pipe (TATA medium)x3.0 M long and 1x19/8 standard G.I (Hit Dip ,long 25 mm dia x 150 mm long galvanized bolt ,Double nuts , Double washers including socketing at both ends of startered G.I (Hot Dip) wire(one earthing of mast)& one Earthing from electrical equipmenti.e. total 2 nos earthing are required for each mast.

Supplying & Erection of big size feeder pillar box of Size (1372 x 914 x 607 mm) made up of 3.15 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35x35x3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C.

Supply and fixing of 63 Amp 415V TPN (with fuse on L & N) Main switch in sheet steel encloser on angle iron frame on wall with nuts bolts etc including earthing. (make- Havells/HPL/Standard)