Loading
Loading…
Loading…
Tender Value
₹3.6 Cr
EMD Value
₹7.2 L
Closing Date
28 Apr 2026, 12:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER TEL
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (As per Rly. Bd. letter No. 2022/CE-I/CT/GCC-2022/Policy dated 14.07.2022).
As per Tender Document and GCC-2022 with latest amendment attached.
39 conditions · 12 needing a document upload
As per Tender Document and GCC-2022 with latest amendment attached.
As per Tender Document and GCC-2022 with latest amendment attached.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1) PAN India Roll-Out for PRS Modernization Work against UTN Network over Dhanbad Division. 2) Up gradation of Existing telecom network connectivity of Divisional HQ and associated units with fiber-based network on GPON over DHN Division. 3) Installation of CCTV in parcel offices (DHN, GMO, KQR, BRKA, DTO, GHD, CPU, SGRL & SKTN) over Dhanbad Division. 4) S&T related Items for - "Enhancement of coach stability capacity at coaching Depot Dhanbad Yard after CTR(S) of IOCL siding in non-interlocking area."
SG-664-01-Tele-2026-27
SG-664-01-Tele-2026-27
Open
Works - General
48 Months
Dhanbad, Jharkhand
₹0
₹7.2 L
28 Apr 2026
7 Apr 2026
14 Apr 2026
139 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,58,56,404.19 | ||
| — | 60.00 | — | — | ||
| SITC of Standard 19-inch Rack Mountable 24-Port managed POE switch , 24 GE10/100/1000 BaseX Ethernet port with POE+ support and 4 x 1GE SFP+ Port for with 4 nos of 1 GE SFP BX SM modules included as per Clause no14.0(II) RDSO/SPN/TC/65/2021,Rev.6.0 or Latest. (Inspection- RDSO) | — | — | — | 26,51,295.6 | |
| — | 320.00 | — | — | ||
| Supply of CAT-6 UTP Patch Cord of length 3 Mtr. It Shall comply to TEC GR No. TEC/GR/SLC - 01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments, Version. (Inspection- Consignee) | — | — | — | 62,192 | |
| — | 320.00 | — | — | ||
| Supply of Simplex Single Mode Optical Fiber Patch Cord 9/125 Jumper Cable 5 Meters 15 ft (SC/APC - SC/APC, LC-SC/SC-SC/LC-LC/FC-LC or as per site requirement) Make- Super Shopper India or equivalent. (Inspection- Consignee) | — | — | — | 43,532.8 | |
| — | 4305.00 | — | — | ||
| Supply of RJ-45 connector suitable for STP/UTP cable make D-link or similar. (Inspection- Consignee) | — | — | — | 21,801.81 | |
| — | 19500.00 | — | — | ||
| Supply of 6 Fiber armoured mono mode optical fiber cable. (Inspection- Consignee) | — | — | — | 3,25,650 | |
| — | 4320.00 | — | — | ||
| Blowing/ Drawing/ Laying of 6-F OFC/ Power Cable / CAT-6 cable in trenches / GI pipe/ through HDPE pipe on ground or on wall for connecting/ interfacing various components for system integration of CCTV surveillance system and others. This includes supply and installation of Fibre management system (wherever required), splicing, and termination of the fibres. | — | — | — | 84,844.8 | |
| — | 5200.00 | — | — | ||
| Supply and fixing of ISI mark PVC conduit pipe of 25mm diameter and 1.5mm thickness (Inspection- Consignee) | — | — | — | 1,79,556 | |
| — | 180.00 | — | — | ||
| Supply of 10/100/1000 Base-TCopper Ethernet Transceiver SFP Module with all accessories. (Inspection- RITES) | — | — | — | 10,09,747.8 | |
| — | 25.00 | — | — | ||
| Supply of 10G SFP+ Module with 40 Km range for above Routers (Inspection- RITES) | — | — | — | 6,28,907.75 | |
| — | 7.00 | — | — | ||
| Supply & Configuration of 8-Port GPON OLT with 4x 10G uplink and 8-PORT GE SFP and 8-PORT 100/1000Base-T, AC/DC Dual Power with connecting accessories as per site requirement. Make-Cisco/ Digisol/ D-link/Raisecom/ZYXEL or better. (Inspection-RDSO) | — | — | — | 23,80,639.8 | |
| — | 7.00 | — | — | ||
| Installation, Testing & Commissioning of entire GPON based networking system as proposed. | — | — | — | 16,01,291.44 | |
| — | 780.00 | — | — | ||
| Supply & installation of GPON (ONT) Class B+, 4xGbE LAN, 2 FXS ports, 1 USB 2.0, 1 UPS port, WiFi 11n 2.4GHz 300Mbps, 5GHz 11ac 866Mbps with connecting accessories Make -Make Dlink/Digisol/Cisco/Raisecom/ Zyxel or better as per Technical Specification attached in Tender Document.. Component should compatible with existing GPON technology of item no.-15. (Inspection-RDSO) | — | — | — | 57,12,634.2 | |
| — | 53.00 | — | — | ||
| Supply of 10G GPON OLT SFP+Fiber module preferably same make of GPON OLT. (Inspection-RDSO) | — | — | — | 11,75,082.61 | |
| — | 7.00 | — | — | ||
| Supply & installation of DHCP Gateway System with 7 x 1000Base T configurable Port with load balancing, failover feature and for feature, Make ZYXEL or similer. Component should be compatible with existing GPON Technology. As per technical specification attached. Make-ZYXEL or Similar. (Inspection-RDSO) | — | — | — | 16,14,682.58 | |
| — | 1.00 | — | — | ||
| Supply & Installation of NMS for the GPON System with license (for Element management for Central Location as decided by Railway) Component should compatible with existing GPON technology. as per technical specification of GPON OLT make. (Inspection-Consignee) | — | — | — | 3,95,709.37 | |
| — | 6.00 | — | — | ||
| Supply of Workstation (All in one PC) for maintenance and monitoring the network as per technical specification. (Inspection-RDSO) | — | — | — | 5,14,021.26 | |
| — | 6.00 | — | — | ||
| Supply of Portable Maintenance console along with application software. (Inspection- RDSO) | — | — | — | 11,20,420.86 | |
| — | 125.00 | — | — | ||
| Supply of Fiber Termination Box, Wall Mount Type with 2 Pigtails and SC/APC Adaptors & Wall Mount Accessories -Pre-terminated Pigtails for Easy Installation make-Standard or better. (Inspection- Consignee) | — | — | — | 1,28,116.25 | |
| — | 950.00 | — | — | ||
| Supply of Fiber Patch Cord - SC/APC To SC/APC - 5 Mtrs. Length LSZH (SMB to ONT) Make:- Digisol/D-Link or better (Inspection-RDSO) | — | — | — | 7,61,900 | |
| — | 30.00 | — | — | ||
| Supply of Fiber Patch Panel - Loaded with 1:2 PLC Splitter Pre Terminated with SC/APC Connectors and Adaptors, Splice Tray & Adaptor Plates make-Standard or better.H56 (Inspection- Consignee) | — | — | — | 30,747.9 | |
| — | 150.00 | — | — | ||
| Supply of Optical Fiber FTTH CAT V single mode triple window 1:2 (50-50) (Inspection- Consignee) | — | — | — | 1,58,913 | |
| — | 68.00 | — | — | ||
| Supply of Fiber Patch Panel - Loaded with 1:4 PLC Splitter Pre Terminated with SC/APC Connectors and Adaptors, Splice Tray & Adaptor Plates make-Standard or better.(Inspection- Consignee) | — | — | — | 71,255.84 | |
| — | 140.00 | — | — | ||
| Supply of Fiber Patch Panel - Loaded with 1:8 PLC Splitter Pre Terminated with SC/APC Connectors and Adaptors, Splice Tray & Adaptor Plates make-Standard or better. (Inspection- Consignee) | — | — | — | 1,75,165.2 | |
| — | 25.00 | — | — | ||
| Supply of Fiber Patch Panel - Loaded with 1:16 PLC Splitter Pre Terminated with SC/APC Connectors and Adaptors, Splice Tray & Adaptor Plates make-Standard or better. (Inspection- Consignee) | — | — | — | 1,13,303 | |
| — | 3600.00 | — | — | ||
| Supply of 2 Core Single-Mode Fiber Un-Armoured cable make-Standard or better. (Inspection- Consignee) | — | — | — | 47,088 | |
| — | 30.00 | — | — | ||
| Supply of UTP CAT - 6 cable, having bare Copper Conductor Suitable for Gigabit Ethernet TEC Specification No. G/WIR 06/02 or latest. Make-D-Link or better (1 Box/Coil- 305 Mtr). (Inspection- Consignee) | — | — | — | 1,56,345.9 | |
| — | 26430.00 | — | — | ||
| Laying of Optical Fiber cable/Cat-6 cable/power cable through wall / duct / conduit including clamping/fixing of duct/conduit over wall ceiling/open space /terrace /existing fixtures etc. as per directives of Railway Site Engineer. | — | — | — | 10,34,470.2 | |
| — | 174.00 | — | — | ||
| Supply of OFC termination box outdoor type. Make- Digilink, DFTKTJC12F or similar. (Inspection- Consignee) | — | — | — | 3,18,303.42 | |
| — | 9.00 | — | — | ||
| Supply of 9U Rack with 19 inch standard dimension with FAN and Power point, wall mounting, front glass door with lock and two key, with rack fixing Multi point AC power strip, cable organiser with wall fixing screws etc. as per site requirement Make: Valrack/Legrand or better. (Inspection- Consignee) | — | — | — | 45,291.96 | |
| — | 6.00 | — | — | ||
| Supply of 12U Wall mount rack. Depth upto 600 mm. It should have transparent thoughened glass front door. Make:-D-Link or similar. (Inspection- Consignee) | — | — | — | 49,974.9 | |
| — | 6.00 | — | — | ||
| Supply of covered 19" (42U) Racks of size 2200mm x 600mm x 600mm (similar to Vero president / HCL / RITTAL Make) complete with all fittings including DC Fan (48V) - 2 Nos and AC power distribution panel(horizontal fitting) with power sockets and fuse protection (minimum 6 Nos of 230V 15A/5A combined) and other accessories. The body should be of high quality cold rolled steel. with wheel and caster arrangement, vented from door borders and rear doors for ventilation and reliable operation. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost (Inspection- Consignee) | — | — | — | 2,02,059.78 | |
| — | 21.00 | — | — | ||
| Installation of 12U/9U/6U/42U Rack as per instruction of site engineer. The tenderer has to supply all the materials required for installation | — | — | — | 13,929.09 | |
| — | 28.00 | — | — | ||
| Supply and Installation of fiber distribution frame 19" rack mounted as per specification no. IRS:TC:81-2000 (Part-D) or 48 fibers (24 fibers from each side) including supply of all pig tail / patch cord / FCFC adopter. (Inspection- Consignee) | — | — | — | 4,31,617.48 | |
| — | 2000.00 | — | — | ||
| Splicing and/or termination of OFC cores as per direction of Railway (both end). | — | — | — | 4,59,560 | |
| — | 207.00 | — | — | ||
| Supply of Splice Closer for OFC (Optical Fibre cable) suitable for Telecom Network With all accessories. (Inspection- Consignee) | — | — | — | 23,144.67 | |
| — | 200.00 | — | — | ||
| Supply of USB Wi-Fi Dongle 802.11N/G/B (600 Mbps) dual band with Antenna compatible with all system (Inspection- Consignee) | — | — | — | 57,410 | |
| — | 7.00 | — | — | ||
| Supply and installation of 24 port PoE network switches with 4 Nos. 10/100/ 1000 Base-T/1000 Base-X SFP ports with 375 watt PoE Power or as per site requirement. Make - CISCO/JUNIPER or better. (Inspection- Consignee) | — | — | — | 2,63,719.19 | |
| — | 34.00 | — | — | ||
| Supply installation, testing and commissioning of 8 port Gigabit PoE Layer 2 Switch supports 8 nos 10/ 100/ 1000 BASE-T ports, along with 2 Gigabit SFP ports combo ports PoE power support 130 watt or as per site requirement. Make- CISCO/ Juniper or superior.(Inspection- RITES) | — | — | — | 7,87,265.24 | |
| — | 80.00 | — | — | ||
| Supply of Indoor Wi Fi Access Point support upto 1200mbps and managed with standalon/cloud or as per site requirement. Make-Cambium, Digisol, D-Link, Cisco, Zyxel or better. (Inspection- RITES) | — | — | — | 10,04,369.6 | |
| — | 228.00 | — | — | ||
| Supply of IO Box with SMB, Make-D-Link/Digisol or similar (Inspection- Consignee) | — | — | — | 27,553.8 | |
| — | 3.00 | — | — | ||
| Supply of Optical Time Domain Reflectometer (OTDR) as per TEC Spec No. :TEC/GR/TX/OTD001/05/SEP-19 or latest. Make- Yokogawa/ Fuzikura/Sumimoto or better. (Inspection- RITES) | — | — | — | 10,60,090.44 | |
| — | 6.00 | — | — | ||
| Supply of Auto single fiber fusion splicer machine with all related accessories and power supply backup arrangement. Make: Fuzikura or better. (Inspection- RITES) | — | — | — | 19,72,495.92 | |
| — | 7.00 | — | — | ||
| Supply of On line pure sine wave UPS of 1KVA with SMF batteries. Minimum 1600VAH for backup of one hour. (Inspection- Consignee) | — | — | — | 2,54,961.98 | |
| — | 6.00 | — | — | ||
| SITC of On-Line UPS 5 KVA with battery back up of minimum 4 hrs with battery trolley of reputed make like APC/Uni-line or other reputed make with similar or better specs.(Inspection- Consignee) | — | — | — | 8,56,145.34 | |
| — | 3.00 | — | — | ||
| Comprehensive Annual Maintenance Contract (CAMC) of entire GPON OLT systembased networking system at PRP, Digha. (Note- The CAMC for 03 years will start from one year warranty period after physical completion of work.) | — | — | — | 9,82,890 | |
| — | 8.25 | — | — | ||
| Excavation of Trench including clearing of roots of trees etc. upto a depth of 1.2 mtr./1.0 mtr./0.8 mtr. and width of 0.3 mtr. at the bottom in any soil including moorum but excluding hard/rocky soil in the entire section. Back filling ramming of the soil in trenches after cable laying/placing HDPE pipe (to be supplied by railways) with GI wire/rope and consolidation of the soil as well as disposal of the soil, if any. (a) 1.2 Mtr. depth. | — | — | — | 5,51,080.7 | |
| — | 600.00 | — | — | ||
| Cutting of chase in rocky areas where rocks are directly encountered at ground level. This includes concreting (1:2:3) up to 3" from the top of the cable with contractor's cement and chips (15-25) mm size. Only cable shall be supplied by the railway. The depth of the trench shouled be 0.3 mtr.The trench shouled be back filled. | — | — | — | 2,26,722 | |
| — | 220.00 | — | — | ||
| Cutting of the platform/Floor with tile/Rock cutting Machine/manually in 30cm depth and 12cm widh approximately (including cutting of tile neatly provide) by removing slabe/tiles if any filling the trench after cable laying and restroing the surface with similar materials to match existing floor/platfrom as per instruction of the site. | — | — | — | 50,987.2 | |
| — | 250.00 | — | — | ||
| Cable Crossing Rly. Track / Road by boring hole at a depth of 1 meter by using one no. 100 mm dia G.I pipe (medium grade) with accessories. G.I pipe with accessories will be supplied by contractor. | — | — | — | 4,55,970 | |
| — | 35.97 | — | — | ||
| Casting,cementing & concreting with cement,sand & stone chips (12.5mm) in the ratio 1:2:4.(all materials are to be supplied by the contractor) | — | — | — | 1,35,983.87 | |
| — | 3500.00 | — | — | ||
| Trenching-Supply of HDPE telecom duct size - 40/33 (Outer/inner dia) as per RDSO spec no.(RDSO/SPN/ TC/45/2013 Revision.2.0 or above) or ISI mark and trenchless trenching (by any means ) at the depth of 2.0 to 3.0 meter for laying of HDPE duct of size 40/33 mm or HDPE duct of size 110 MM and Blowing of OFC. Other HDPE pipe duct of size 40 / 33mm or 63 mm will be supplied by Railway if required for laying of signalling / telecom cable. Work will be executed as per site engineer. (Inspection- Consignee) | — | — | — | 18,71,310 | |
| — | 11.20 | — | — | ||
| Supply and laying of HDPE Pipe / Telecom duct (Outer dia 40 mm) as per generic requirement No. G/COS-08/01 DEC'99 or latest at a depth of 1.0 metre in all kind of soils. This includes transportation of HDPE pipe / Telecom duct to the site. (Inspection- Consignee) | — | — | — | 8,18,870.42 | |
| — | 2000.00 | — | — | ||
| Supply and fixing of PVC Casing and caping of 50 mm x 50 mm x I.5 mm thickness with cover on wall/Roof/Partition etc as per IS 14927 Part 1 or latest (All the miscellaneous materials required for fixing to be supplied by the contractor). (Inspection- Consignee) | — | — | — | 1,78,840 | |
| — | 16.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Full HD Fixed Bullet type IP Colour Camera along with 128 GB or higher SD Card, housing and mount and all accessories required for installation purposes As Per RDSO specification No RDSO/SPN/TC/65 /2021Version 6.0 or latest. Inspection by RDSO (Inspection- RDSO) | — | — | — | 2,09,104.32 | |
| — | 15.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Video Management & Video recording Software with License as per RDSO Specification RDSO/SPN/TC/65/2021 Rev 6.0 or latest amendment (Inspection- Consignee) | — | — | — | 63,871.5 | |
| — | 15.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Video Analytics Software with License as per RDSO Specification RDSO/SPN/TC/65/2021 Rev. 6.0 with latest (Per camera) (Inspection- RDSO) | — | — | — | 1,04,159.85 | |
| — | 1.00 | — | — | ||
| Supply of 22" LED Monitor, MakeDell/Samsung or better. (Inspection- Consignee) | — | — | — | 9,701.61 | |
| — | 500.00 | — | — | ||
| Supply of Optical Fiber Cable , 6 Core , Single Mode . (Inspection- Consignee) | — | — | — | 8,350 | |
| — | 100.00 | — | — | ||
| Supply of 3 core 2.5 sqmm, multi strand copper conductor, PVC insulated armoured power cable.(Inspection- Consignee) | — | — | — | 4,482 | |
| — | 5.00 | — | — | ||
| Supply and Installation of surface Wall mountable type 19 inch 6U network Rack with front glass door with lock and rack fixing multipoint AC Power trip & all accessories (Inspection- Consignee) | — | — | — | 21,747.4 | |
| — | 27.00 | — | — | ||
| Supply of Single Mode Patch Cord length 3 meters (LC-SC/SC-SC/LC-LC/FC-LC)asper site requirement, (Inspection- Consignee) | — | — | — | 3,445.2 | |
| — | 0.50 | — | — | ||
| Laying cable of different size of S&T cables as per cable route plan approved by Rly. And meggering of all main & tail cables. As per technical specification of tender.(Cable route plan will be supplied by site engineer at the time of execution of work | — | — | — | 5,476.75 | |
| — | 0.70 | — | — | ||
| Laying of OFC through HDPE pipe / Telecom duct by blowing of OFC as per procedure and practise in Railway and advised by site engineer. | — | — | — | 9,653.24 | |
| — | 96.00 | — | — | ||
| Splicing /Dropping/Termination of each Fiber /Pigtail in the LIU/FDMS/Termination Joints through fusion Splicing of the termination of OFC Cables. | — | — | — | 4,082.88 | |
| — | 3.00 | — | — | ||
| Supply and installation of Joint enclosure and making of straight through joints including splicing and making Pit of size 1.2 metre (depth) and 1.2 metre dia in all type of soil in the section, back filling the pit after jointing and coilling of 10 metres OFC cable (as reserve / spare). Provision of bricks walling around the sides and bottom of the pit with 1:6 plaster covering the pit with RCC slab, back filling with earth after ramming as per drawing. All the materials requires for OFC joints & pit construction will be supplied by the contractor. (Inspection- Consignee) | — | — | — | 46,004.73 | |
| — | 2.00 | — | — | ||
| Supply and Installation of OFC termination box for 24-Fibre cable and splicing of Fibre with Pig Tails cables. This includes testing of OFC, Supply of Teak wood plank, Aluminium ladder etc. (Inspection- Consignee) | — | — | — | 38,847.24 | |
| — | 2.00 | — | — | ||
| Fixing of 20 pair CT Box and termination of cable at Station / LC gates / OFC rooms // relay Rooms etc . This included fixing of PIJF cable / 6 quad cable and CT Box on wall with necessary wooden plank with PVC Pipe for entire length of cable inside the room ( CT box covered in supply portion should be used for this work) other required misc. material shall be supplied by the contractor. work to be executed as per the instruction of site engineer. | — | — | — | 4,360 | |
| — | 1.00 | — | — | ||
| Supply of basic earthing kit 1 set as per RDSO spec no.- RDSO/SPN/197/2008 or latest consisting of- a) Earth electrode of copper bonded high tensile low carbon steel rods 3.0m long dia 17 mm , specially designed for electrical grounding-01 Nos. as per RDSO Spec no.- RDSO/SPN /197/2008 or latest. (b) RDSO approved earth enhancing compound in 10kg pack-3 no. (c) Copper bus bar of 25mm x 6mm x 300mm with 99.9% purity - 1 nos. and another of 25mm x 6mm x 150mm to terminate on earth electrode-01 No. (d) PVC insulated multistring 35 sq mm copper cable in double as per IS-694 -20mtrs. e) Copper bus bar of 25mm x 6mm x 200mm with 99.9% purity - 1 nos. f) PVC insulated multistring 16 sq mm copper cable in double as per IS-694 -20mtrs. g) PVC insulated multistring 10 sq mm copper cable in double as per IS-694 -20mtrs. Installation of maintenance free earth consisting of the following Digging the earth to required depth, filling the Earth enhancement compound, Provision of Exothermic Weld connection on Copper Tape of 25*6*150 mm welded to the earth electrode(Weld material and tool & fixture for the weld to be arranged by the Contractor.) provision of Exothermic weld connection, one to connect the 35 sq. mm copper cable to the copper tape welded to earth Electrode and another to the copper tape to be fixed inside the equipment relay/rack/appartus room/(Fixture of mounting the copper inside the relay room, weld materials and tools and fixture of the weld shall be arranged by the contractor.(Supply, installation & comissioning to be done by RDSO approved source only). (Inspection- Consignee) | — | — | — | 16,186.26 | |
| — | 1.00 | — | — | ||
| Installation of single earth (maintenance free) including the following:- welding and fixing of copper tape (used as bus bar) welding of cable to copper plate using material supplied . All the material supplied for mounting of copper tape, exothermic weld materials, tools and fixtures for welding copper tapes shall be arranged by contractor.(As per bonding connections drawing no.SDO/RDSO/E&B/002 and as per RDSO spec no. RDSO/SPN/197 ver.1.0 or latest) a. Digging /Auguring/Boring of single earth pit of 100mm to 125mm dia to the depth of approx. 2.8 meter. b. Insertion of 3.0 meter electrode and penetrating it at least .2 meter by pushing gently with sledge hammer where the natural soil is assumed. c. Filling of earth pit with earth enhancement compound (EEC) in slurry from and backfilling. d. Carrying out exothermic weld connection on single earth electrode to a copper tape of 150X25X6mm. e. Carrying out exothermic weld connection on the copper tape of 150X25X6mm on earth electrode for connecting two 35 Sq mm cables for redundancy. .f. The exothermic welding material for bonding the earth system shall be procured from RDSO approved firms, which includes graphite moulds, clamps, weld metal powders. g. Digging a trench to a depth of at least 0 .5 Mtr. and run the two 35 Sq mm earth conductor ( procured against supply item) from earth pit to MEEB. h. Routing and termination of two 35 sq mm earth conductors in trench from earth pit to 300X25X6mm MEEB, which is to be fixed inside the equipment room with two insulation studs. i.525x350x250mm (inside dimension) concrete earth pit with a concrete lid, approx 50mm thick with pulling hooks, shall be provided to cover the pit. Back side of the cover will be painted in black and dare of the testing and average resistance value shall be written. | — | — | — | 7,068.24 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-ACS-13.03.2026.pdf
ATTACHMENT
GCC-April2022.pdf
ATTACHMENT
Tender document
ATTACHMENT
TechnicalSpecificationPRSGPON2.pdf Technical Spec
ATTACHMENT
Similar Nature Of Work
ATTACHMENT
GCC-ACS-14.07.2022.pdf
ATTACHMENT
GCC-ACS-13.12.2022.pdf
ATTACHMENT
GCC-ACS-26.04.2023.pdf
ATTACHMENT
GCC-ACS-07.08.2023.pdf
ATTACHMENT
GCC-ACS-20.10.2023.pdf
ATTACHMENT
GCC-ACS-21.12.2023.pdf
ATTACHMENT
GCC-ACS-25.09.2024.pdf
ATTACHMENT
GCC-ACS-20.12.2024.pdf
ATTACHMENT
GCC-ACS-09.01.2025.pdf
ATTACHMENT
GCC-ACS-04.03.2025.pdf
ATTACHMENT
TenderDocument-01-PRS-GPON-CCTV-IOCLii-SIGNED.pdf
ATTACHMENT
TechnicalSpecificationPRSGPON2.pdf
ATTACHMENT
SIMILARNATURE-VarioustypesofTelecomWorks.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .