Repairing work and Civil Work at Diff. Ren Basera as per requirement in Khokhra ward of South Zone.(ARC)

NAME OF WORK: - Repairing work and Civil Work at Diff. Ren Basera as per

requirement in Khokhra ward of South Zone.(ARC)

AUTHORITY -- ENGINEER --

DY. MUNICIPAL COMMISSIONER (SOUTH ZONE) ADD. CITY ENGINEER-5 (SOUTH-ZONE)

AHMEDABAD MUNICIPAL CORPORATION AHMEDABAD MUNICIPAL CORPORATION

SOUTH ZONE OFFICE SOUTH ZONE OFFICE

Dr SHYAMA PRASAD MUKHRJEE BHAVAN Dr SHYAMA PRASAD MUKHRJEE BHAVAN

OPP. MANINAGAR FIRE STATION, RAMBAG. OPP. MANINAGAR FIRE STATION, RAMBAG

AHMEDABAD – 380008 AHMEDABAD –

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

TENDER FORM (SOUTH ZONE)

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTEMENT- (S.Z.)

Name of work :- Repairing work and Civil Work at Diff. Ren Basera as per requirement

in Khokhra ward of South Zone.(ARC)

Qty Description Rate Unit

Demolition incl. stacking of serviceable materials &

1 disposal of unserviceable materials with all lead

and lift.(R&B SOR.2023-2024)

(a) R.C.C. work ( Pg.No.140, I.Code No.20002,

(b) Brick work in Cement mortar (Pg.No.140,

I.Code No.20003B, I.No.20.11)

c 2.00 (C) Plaster (CH NO. 20 ,20045,PG NO -142) 19.38 Smt

(d) Tiles or Stone flooring (Pg.No.140, I.C.

(e) Sheet roofing (G.I. Or A.C.) (I.No.20.27 I.C NO.-

(f) Doors,Windows ventilators (wood/steel)

Dismantling barbed wire fencing / Chainlink

Fencing including making rolls and also including

dismantling fanning posts including all earth

work concrete in the base and making good

2 4.00 the disturbed ground stacking unseal materials as 66.15 Rmt

directed and disposing all the unserviceable

materials with all leads al lifts & carting to AMC

Store as directed by engg. in charge (R&B 2023-

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or

soft soil(R&B SOR 2023-24,I.CNO.-

a 3.00 (a) 0 to 1.5 mtr depth 201.81 Cmt

b 3.00 (b)1.5 to 3.0 mt. depth. 222.72 Cmt

c 1.00 (c)3.0 to 5.0 mt. depth 243.62 Cmt

Earthwork in cuting in all sorts of soil and soft

murrum including conveying and spreading the

stuff, embankment as and where directed within

200meters from the end of the cutting with all

required lead and lift.(R&B SOR 2023-24 I.C NO

Conveyance charge of earth, lime, murrum,

building rubbish, manure, garbage, sludge,

excavated rock, fly ash, aggregates of any kind

executed outside the road site. Rate also includes

spreading & levelling etc complete. Internal

conveyance above 50 mt done within the work site

is not payable. Lead From 5 Km to 10 Km. (Road

Project Approved Rate)

Providing and laying cement concrete 1:4:8 (1 -

Cement : 4-Coarse sand : 8-Graded Brick bats

aggregate 40 mm normal size) and curing

complete excluding cost of form work in (A)

Foundation and Plinth (upto 10 ton) (R&B SOR

Provdg. & laying cement concrete 1:4:8 (1 cement

: 4 coarse sand : 8 hand broken stone aggregates

7 2.00 40 mm nominal size) and curing complete 2653.67 Cmt

excluding cost of form work in Foundation and

plinth. (R&B SOR 2023-24,5004A Pg no.52)

Providing and laying controlled cement concrete M-

200 and curing complete, excluding the cost of

form work and reinforcement for reinforced

concrete work in: (R&B SOR 2023-24)

(A) Foundations, footings, base of columns, and

mass concrete.(05024AA,Pg No.-56)

(B) Walls from top of foundations/level up to floor

two level. (05024BA,Pg.No.-56)

(C) Slabs, landings, shelves, balconies, lintels,

c 2.00 beams, girders and cantilever upto floor two 4460.36 Cmt

level.(05024CA,Pg.No.-57)

(D) Columns, pillars, posts and struts upto floor two

level. (05024DA,Pg. No.-57)

Providing & Applying Tri mix with De watering

Machine floter machine on constructed RCC work

including Machine & Labour etc Comp as directed

(Approved rate)

Filling Available Excavated Earth (Excluding Rock)

In Trenches,Plinth,Sides Of Foundations Etc.In

Layers Not Exceeding 20 Cm.In Depth

Consolidation Each Deposited Layer By Ramming

And Watering.(R&B SOR 2023-24,4006,Pg.No.-

Providing form work in ordinary timber planking so

as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

11 0.00 propping and centering below supporting floor to

celling not exceeding 4 M & removal of the same

for in situ reinforced or plain concrete work in (R&B

SOR 2023-24 CH. NO 9, I. NO 9.1)

(A) Foundation, footings, bases of columns etc.

and mass concrete.(09001AA, Pg. No.-78)

(B) Flat surface such as soffits of slabs, landing and

b 10.00 the like (I) Floors etc. 200 mm in 252.00 Smt

thickness.(09001B1A, Pg. No.-78)

(C) Vertical surface such as walls (any thickness)

partitions and the like including attached but

tresses & string course & the like.(09001CA, Pg.

(D) Columns Pillars Posts and struts.(1) Square

d 10.00 Rectangular Polygonal in plan.(09001G1A, Pg. 297.68 Smt

Provdg. & laying cement concrete 1:2:4 (1 cement

: 2 coarse sand : 4 graded stone aggregates 20 mm

nominal size) and curing complete excluding cost

of form work and reinforcement for reinforced

concrete work in (R&B SOR 2023-24 CH. NO 5, I.

(A) Foundations, footing, of columns and mass

concrete(05011AA,Pg. No.-53)

(B) Slabs, landings, shelves, balconies, lintels,

b 2.00 beams, girders and cantilever upto floor two 4012.47 Cmt

level.(05011BA,Pg.No.-53)

(C) Columns, Pillars posts and struts upto floor two

level.(05011DA,Pg.No.-53)

Providing TMT Bar FE 500 reinforcement for

R.C.C. work including bending,binding and placing

in position complete upto floor two level.(R&B SOR

Brick Work Using Common Burnt Clay Building

Bricks Having Crushing Strength Not Less Than

14 2.00 35 Kg/Sq. Cm. In Cement Mortar 1:6 (1 Cement : 3981.21 Cmt

6 Fine Sand) (A) In foundation and Plinth (R&B

SOR 2023-24, I.C NO.-06002BA Pg. No.-70)

Extra for brick work in super structure above plinth

15 3.00 level upto floor two level (B) Conventional (R&B 272.25 Cmt

SOR 2023-24, I.C.NO 06006C, Pg. no.-71 )

Half Brick Masonry In Common Burnt Clay Building

Bricks Having Crushing Strength Note Less Than

16 3.00 35 Kg/Sq. Cm. In Cement Mortar 1:4 (1 Cement : 593.90 Smt

4 Coarse Sand) In Foundation and plinth

(R&BSOR2023-24,I.C NO.- 06008A2A,Pg. no.-)

Extra for half brick masonry in super structure

17 3.00 above plinth level upto floor two level. (B) 52.80 Smt

Conventional (I.C NO 06010B, Pg. No.-74)

Providing cement plaster in single coat on

brick/concrete wall for interior/exterior plastering

upto any floor level finished even and smooth in

18 0.00 CM 1:3 incl. finishing with floating coat of neat

cement slurry, with necessary scaffolding etc.

complete (R&B2023-24,I.C NO., 17002A Pg. No.-

Providing 20mm thick double coat sand face/mala

cement plaster on interior brick/concrete work for

plastering comprising o f base coat of 12mm thick

cement plasterin cement

mortar(1Cement:4coarsesand) in rough finishing

and 8mm thick top coat of

cementmortar1:2(1Cement:2Coarsesand) finished

with trovel including scaffolding curing etc.

complete.(R&B SOR 2023-24 P.131, i.c no.-

Providing 10mm thick cement plaster in single coat

for plastering onceilings and sofits of stairs upto

floor two level for interior plastering and finished

even and smooth in (i)Cement mortar 1:3 (1-

cement:3-sand) (R&B SOR 2023-24

Providing and applying fibere reinforced

cementitious micro concrete work in cellings and

beams incl.mixture of CEMSCREED HM (F) fair

mate company material, FBR bonding agent

21 3.00 material with water in suItable proportion anti 530.00 Smt

corrosive treatment on exposed beam,celling steel

bars with safeCore R incl.all kind of labour

etc.comp.including three coat of white

wash.(Approved Rate in ARC)

Providing And Laying Polished Kota Stone Slab

Flooring Over 20 Mm. (Average) Thick Base Of

Cement Mortar 1:6 (1 Cement : 6 Coarse

Sand) Or Lime Mortar 1:1.5 Laid Over And

Joined With Grey Cement Slurry mixed with

pigmentt omatchtheshade of slab including rubbing

and polishing etc.complete.(A)25mmthick. (R&B

Labour work for moulding Polish kota stone surface

rate also including providing cutting and grinder

machine for molding work etc comlete as

directed.(app. rate)

Labour work for Polish kota stone surface rate also

24 3.00 including providing cutting and grinder machine for 64.00 Smt

molding work etc comlete as directed.(app. rate)

Providing And Laying Cement Concrete Flooring

For I.P.S.1:2:4 (For Indian Patent Stones) (1

Cement: 2 Coarse Sand:4 Graded Stone

25 5.00 Aggregate 20 Mm. Nominal Size) Lain In Layer 297.68 Smt

Finished With A Floating Coat Of Net

Cement.(40 Mm Th.) (R&B SOR 2023-24

Additional Rate For Providing Water Proofing

Solution in I.P.S

P & L 24"x24" vitrified 8mm thick tile flooring over

20mm (average) base of cement mortar

1:6(1cement:6coarsesand) on new surface or

fixing on existing flooring by adhesive material

27 5.00 including dismentaling of existing flooring and 1383.99 Smt

jointed with color cement slurry including finis ed

with flush pointing & cleaning the

surfaceetc.complete for anti skit. (R&B SOR2023-

P & L 24"x24" vitrified 8mm thick tile flooring over

20mm (average) base of

cementmortar1:6(1cement:6coarsesand) on new

surface or fixing on existing flooring by adhesive

28 5.00 material including dismentaling of existing flooring 1178.10 Smt

and jointed with color cement slurry including finis

ed with flush pointing & cleaning the surfaceetc.

complete for light shade(R&B SOR 2023-24

Providing and Fixing pvc.Door (sintex door-

29 10.00 equivalent) with necessary alluminium fitting with 1617.00 Smt

EL-7 section frame (Approved Rate as per ARC)

Providing & laying polish kota stone (25 mm th,)

Sandwich platform. Work incl. provdg good quality

& even shade polish kota stone of required size

having uniform thickness. Work also incl. providing

nece. Dismentling of brick work for making jari to

support the etc.comp.(app rate)

P/F glass of 4 mm thik for vent lowers and window

31 3.00 with wooden border patti as per instruction of eng. 150.00 No

In chage.(app.rate)

Making hole in brick wall & all damaged work shall

be well repaired as per inst. etc. comp

Provdg. & fixing rubber plug for sink or wash basin.

Providing and fixing 30mm thick FACTORY MADE

SOLID PANEL PVC DOOR SHUTTER consisting

of frame made out of M.S. tubes of 19 gauge

thickness and size of 19mm x 19mm for stiles and

15mm x 15 mm for top and bottom rails. M.S. frame

shall have a coat of steel primers of approved make

and manufacture, M.S. frame shall be covered with

5 mm thick heat moulded PVC ‘C’ channel of size

30 x 50 mm forming stiles, and 5mm thick 75mm

wide PVC sheets for top rail, lock rail and bottom

34 5.00 rail on either side, and 10mm (5mm x 2) thick, 1135.02 Smt

20mm wide cross PVC sheet as gap insert for top

rail and bottom rail, Panelling of 5 stiles and rails

with 30mm wide x 5mm thick PVC sheet beading

on eighter side, and joined together with solvent

cement adhesive,. An additional 5mm thick PVC

strip of 20mm width is to be stculk on the interior

side of the ‘c’ channel using PVC solvent cement

adhesive etc. complete as per direction of Engineer

in charge, manufacture’s specification and

drawing. (R&B SOR 2023-24 P.92,I.C NO.10043)

Providing and fixing approved standard brand

factory made PVC door FRAME of size 50 x

mm with a wall thickness of 5 mm made out of

extruded 5 mm rigid PVC foam sheet mitred at

corners and jointed with 2 Nos. of 150 mm long

brackets of 15 x 15 mm M.S.square tube the

vertical door profiles to be reinforced with 19 x

mm M.S.square tube of 19 guage, EPDM rubber

gasket weather seal to be provided through out

the frame. The door frame to be fixed to the wall

using M.S.screws of 65/100 mm size

etc.complete as per manufacturers specifications

and direction of Engineering in charge incl.

medium grade aluminium hardware all octroi, tax

charges etc.complete (R&B SOR 2023-24 I.C NO-

Providing and fixing Prelam PVC sheet wall

paneling of thickness 5mm consisting of panels

having size 1220 x 2440 mm stuck on inner frame

work of 50mm wide strips of 5mm thick PVC sheet.

The strips should have in their center a grove of

6mm width asnd 1mm depth for sinking the had of

the screw using to fix the strips of the wall and

should be placed vertically at equal intervals of 10”

36 5.00 center to center. The PVC strips shall be fixed to 944.00 Smt

the wall using 65mm long M.S. scres through the

groove in the strip by using PVC fasteners. The

distance between two screws shall not be more

than 200 mm. A groove of 2mm may be left at the

joint of two panel for aesthetic looks. The exact

sizeof the panel and correspondingly of the grid

may vary depending on the size of the wall.(R&B

Providing and fixing 35 mm th. Shutters for doors

windows & clearstory windows incl. wood frames

as specified 12 cm. x 7cm. size incl. anodised

37 0.00 alluminium fixtures and fastenings including primer

coat of approved quality and two coats of oil paint

etc. complete.(R&B SOR.2023-24, I.C.No-10032a,

a 2.00 (I) Fully glazed 4788.50 Smt

b 2.00 (II)Fully panelled 5478.89 Smt

c 2.00 (III) Partly panelled & partly glazed. 5133.69 Smt

Providing and fixing eco-friendly light weight

calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S.

part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine

fissured/ Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true

38 7.00 horizontal level suspended inter locking metal grid 1632.63 Smt

of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both

side) consisting of main ‘T’ runner suitably spaced

at joints to get required length and size of

24X38mm made from

0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to

centre to form agrid of 1200X600mm and

secondary cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick (Minimum) sheet

Providing and fixing complete sliding shutter solid

PVC window 25mm thick factory made glazed solid

PVC window shutter consisting of frame made out

of M.S. tube of 19 gauge of size 15 x 15mm for

styles top, bottom rail. M.S. frame shall have a coat

of steel primer of approved make and manufacture,

M.S. frame shall be covered with 4mm thick heat

mouled PVC ‘C’ channel of size 58mm x 25mm x

38-mm out of which 8mm shall be bent at

degree towards inner side on front face of the

window shutter forming stiles. For top rail and

bottom rails, M>S. frame shall be covered with

4mm thick, 58mm wide PVC sheet out of which

8mm shall be bent at 90 degree towards inner side

on front face and 38mm wide PVC sheet shall

39 3.00 cover the M.S. frame at top and bottom rail on back 2576.85 Smt

side of window shutter, 4mm thick 15mm wide

cross PVC sheet as gap insert for top and bottom

rail. PVC sheet beading of 8mm thick (4mm x 2) to

be stuck internally with solvent cement adhesive in

top and bottom rails. Glass panel will be fitted

externally in the clear space available between

stiles & rails and fixed between PVC sheet of stiles

and rails bent at 90 degree on front face 12mm x

123mm ‘L’ shape outer PVC beading nailed on

stiles and rails at the back side so that ‘L’ shape

outer PVC beading can be removed when required

for replacement of broken glass etc. complete as

per direction of etc. complete as per direction of

Engineer in charge and manufactuture’s

specification. (SOR 2023-24, P.98,I.C NO. 10052)

Providing and fixing full height Prelam PVC

partition system 50mm thick consisting of 40mm

sandwich PVC panel made out of 36mm high

density expanded polystyrene sheet (E.P.S.

Thermocol) stuck on both side with 2mm thick

prelim PvC sheet reinforced with frame work made

from 35mm x 5mm M.S. angle. In between two

M.S. angles 4 mm with feathered edges shall be

fixed on floor and 50 x 75 mm with feathered edges

prelim PVC “C” channel of size 50mm x 75mm with

feathered edges prelim PVC panel shall be

40 10.00 inserted in the PVC ‘C” channel The first and last 2152.00 Smt

M.S. angle should be erected such that it is inside

a PVC C channel of size 50 x 75mm In between

adjoining EPS sandwiched PVC partition panel

4mm thick x 75 mm width prelim PVC sheet

feathered at edges shall be stuck on front and back

face using solvent cement etc. An additional 4mm

thick PVC strip of 40mm width is to be stuck on the

intrior side of the ‘C” channel using PVC solvent

adhesive completeas per direction of Engineer in

charge. Manufacture’s specification and drawing.

Providing and fixing full height Plan/colour PVC

partition system 50mm thick consisting of 40mm

sandwich PVC panel made out of 36mm high

density expanded polystyrene sheet (E.P.S.

Thermocol) stuck on both side with 2mm thick plain

PVC sheet reinforced with frame work made from

35mm x 5mm M.S. angle. In between two M.S.

angles 4 mm thick plan heat moulded PVC ‘C’

channel of size 50mm x 100 mm with feathered

edes shall be fixed on floor and 50 x 75 mm with

feathered edges plain/printed/prelim PVC ‘C’

channel shall be fixed in the ceiling. Sandwich PVC

41 10.00 panel shall be inserted in the PVC “c” channel. The 1783.00 Smt

first and last M.S. angle should be erected such

that it is inside a PVC C channel of size 50 x 75mm.

In between adjoining EPS sandwiched PVC

partition panel 4mm thick x 75mm width plain PVC

sheet feathered at edges shall be stuck on front

and back face using solvent cement etc. And

additional 4mm thick PVC strip of 40mm width is to

be stuck on the interior side of the C channel using

PVC solvent adhesive complete as per direction of

Engineer in charge, manufacture’s specification

and drawing. (SOR 2023-24, P.101,I.C NO.

Providing and fixing fibre insulations board lining

42 0.00 with butt jointing and Nails (frame worked cover

fillets to be measured and paid for separately)

(i) 12mm thick (SOR 2023-24, P.127,I.C NO.

(ii) 18mm thick (SOR 2023-24, P.127,I.C NO.

(iii) 25mm thick (SOR 2023-24, P.127,I.C NO.

Providing and Fixing 12 mm Thick Cement Fibre

Providing and Fixing playwood lining with but

44 0.00 jointed and nails (frame work and cover fillets to be

measured and paid for eparately)

(i) 06mm thick (SOR 2023-24, P.127,I.C NO.

(ii) 12mm thick (SOR 2023-24, P.127,I.C NO.

Providing and laying white glazed tiles 6mm thick

in flooring treads of steps and landing laid on a bed

45 100.00 of 12mm thick cement mortar 1:3 (1-cement : 3- 908.17 Smt

coarse sand ) finishing with flush pointing in white

cement.(SOR 2023-24, P.120,I.C NO. 14008AA)

Providing And Laying Glazed Tiles 6 Mm

Thick In skirting risers of Steps and dedo 10Mm

Thick Cement plaster 1:3 (1Cement : 3Coarse

Sand)Finished With Flush Pointing In White

Cement slurry.(R&B SOR 2023-24 PG NO-

Providing and laying coloured glazed tiles of the

size 300 mm x 200 mm x 8 mm / 300 mm x

mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement :

coarse sand) & jointed with white cement

slurry.(R&B SOR 2023-24 PG NO-124,14036)

Providing and fixing rough cast wired glass 6 mm

thick bedded in putty and thick with wooden

48 0.00 beading including the cost of wooden beadings of

Indian teak wood and necessary cutting of glass.

2.00 (C) wired figured glass. 559.26 Smt

Supplying and fixing Nimbhada ladi 37 to 50 mm

thick for walk-way, covering the activity of

excavation, ramming, Laying on sand bedding as

49 10.00 per requirement to fix the Nibhada Stone in Line & 236.61 Smt

Level with cement pointing in cement mortar 1:2 etc

complete as directed.(AMC Drainage SOR Jan-

Labour work for fixing above or any interlocking

blocks/nimbhada on up to 50mm th sand

bedding,levelling,watering anf fixing. Rate incl.

50 10.00 average 30cm depth for excavation and or 69.64 Smt

filling,carting away debries/excavated material up

to 5 km and cleaning the site etc.comp. as directed.

(AMC Drainage SOR Jan-2016)

Providing and laying broken chine mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

51 20.00 creme out upto surface using white cement 739.89 Smt

including rounding

off junctions and extending them upto 15 cm along

the wall,clearing with water and oxalic acid etc. as

directed.(R&B SOR 2023-24 P.124,I.C NO. 14035)

Providing Cement Vata (10 Cms X 10 Cms)Size

Quarter Round In Cement Mortar 1:1 Including

52 10.00 Near Cement Finishing, Watering Etc. 23.45 Rmt

Complete.(R&B SOR 2023-24,P.131,I.C NO.

Providing, supplying and fixing precast C.C. blocks

(M-20) edge kerb having size of 75 x 300 x

mm depth and as per design conveying it to the

53 10.00 site, jointing into C:M 1:3 and racking out the joints 195.54 Rmt

incl. necessary excavation of asphalt, soil

etc..completed.- (AS PER ROAD PROJECT

Conveyance charge of earth murrum, building

rubbish, manure, garbage, sludge, excavated

rock,fly ash, aggregates of any kind etc.comp

(R&B SOR 2023-24 PG NO.-44, I.C NO-E027)

Providing & Fixing M.S.Grill,Gate,Elevation

Element Of Decorative Pattern With

M.S.Channel,Flat,Medium Grade M.S.Pipe,Square

55 90.00 Or Round Bars With Round Heanded 95.00 Kg

Bolts,Nuts,Or By Screw.Incl.Applying One Coat

Zinc Primer And Two Coat Of Oil Paint

Etc.Comp.(As Per A.R.C)

Providing and laying polished granite stone slab

mm thick in risers of steps, dedo and pllars laid on

10 mm thick cement mortar 1:3 (1 cement :

coarse sand) and jointed with gray cement slurry

including rubbing & polishing etc. complete. (R&B

SOR 2015-2016,SR. NO. 23A CH.14 )

Providing & fixing 2.00 mm thick F.R.P. sheet of

good quality and standard make rate also includes

necessary fabrication structure in the grid of 1'-6" x

1'-6" size usiung hollow pipe of size 3/4" x 3/4" , 2"

x 1" & 1" x 1" rate also inclusive necessary bending

,cutting and fabrication charges and priming coat

and 2 coats of oil paint of shade approved by

engineer in-charge rate also includes washer and

silicon paste required for fixing the sheet in good

quality as diredted.(As per ARC)

Carrying out plinth treatment to post construction

/ exsiting structure by spraying chemical solution

58 5.00 for termite control treatment incl. labour and 104.90 Smt

materials consistant with I.S.I specification.(R&B

Carrying out timber treatment to all wood work incl.

drilling holes and spreying oil based chemical

59 5.00 solution on surface ot timber work for termite 54.98 Smt

contorl including labour and materials etc. comp

Provdg. & fixing 100 mm size P or S trap for water

closet squatting pan incl. jointing the trap with the

60 0.00 pan & soil pipe in cement mortar 1 :1 (cement :

fine sand) (R&B SOR 2023-24, PG NO-

5.00 (A) Vitreous China : 311.85 No

Providing and fixing wsh down water closet

(Europeantype,W.C.Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

61 5.00 Mortar1:1(1-Cement:1-finesand) (Sea land cover 1290.80 No

to be measured and paid for separately)

(A)vitreous China Pattern :(i) in white colour (R&B

Provdg. and fixing water cloest squatting pan (

indian type W.C. pan) size 580 mm ( Earth work.

Bed concrete, foot rests and trap to be measured

and paid for separately) (A) Vitreous China : (1)

Long pattebn white colour. including puffin cement

mortar 1 :3 (1 cement : 3 coarse sand) a pair of

white virteous China 250 mm x 130 mm x 30 mm

foot rest for long patten swuatting pan water closet.

including Provdg. & fixing G.I. inlet connection for

flush pipe with W.C. pan. (R&B SOR 2023-24 PG

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

63 5.00 but excluding fittings.(A) Vitreous China:(ii) Flat 1400.18 No

Back washbasin 550 mm x v 400mm size. (i) In

white colour.(R&B SOR 2023-24 PG NO-

Provdg. & fixing C.P. Brass screw down bib taps of

64 0.00 following size (R&B SOR 2023-24 PG NO-

a 5.00 (I) 15mm dia 184.98 No

b 5.00 (II) 20mm dia 212.68 No

Providing & Fixing Angle Cock Of "Ess Ess"

Trend Series Or Equivalent Standard Make As

Approved By Engg.In Charge All Complete.(N.S.)

Provdg. & Fixing Gun Metal Check Or

66 5.00 Nonruturn Full Wheel Valve. (A) 15 Mm Dia(R&B 184.98 No

Provdg. & fixing C.P. Brass screw down bib taps of

following size (B) Brass chromium plated screws

down Bib Tap.(R&B SOR 2023-24 PG NO-167,

a 5.00 (I) 15mm dia 184.98 No

b 5.00 (II) 20mm dia 212.68 No

Providing and fixing pillar tap, capstan head,

screw down high pressure with screws, shanks

and back nuts.(R&B SOR 2023-24 PG NO-

a 5.00 (i) 15mm dia. 305.67 No

b 5.00 (ii) 20mm dia. 351.18 No

Providing and fixing chromium plated brass

half trun flush cock of approved quality including

fixing in pipe line etc. complete.(R&B SOR 2023-

a 5.00 (i) 20mm dia. 252.26 No

b 5.00 (ii) 25mm dia. 261.16 No

c 5.00 (iii) 32mm dia. 273.03 No

Provdg. & fixing ball cock of approved qaulity as

70 0.00 directed.(R&B SOR 2023-24 PG NO-

0.00 (A) Copper metel.

5.00 (II) 50 mm dia 187.96 No

0.00 (B) Abonite.

5.00 (II) 50 mm dia 136.52 No

Providing and fixing Urinal of approved quality

including connection with trap and with integral

71 10.00 longitudinal flush pipe.(A) Squating plate pattern 1535.63 No

white earthenware 550mm x 300mm (R&B SOR

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap

72 5.00 etc. complete.(B) White earthenware flat back or 1535.63 No

corner type size 430mm x 260mm x 350mm.(R&B

Waste Pipe for Wash basin C.P. 32 mm dia (R&B

SOR 2023-24 I.C NO.M602, P.N-25)

Providing and fixing C.P. brass shower rose with

74 5.00 15mm or 20mm inlet.(A) 100mm dia. Each (R&B 279.37 No

Providing & Fixing Chromium Plated Brass

Flush Cock With Lever Of "Ess Ess" - Trend

75 5.00 Series Or Equivalent Make Incl.Fixing In Pipe 1800.00 No

Etc.Comp.As Dir.Of Engg.In Charge.(N.S.) (1)

Provdg. & fixing 600mm x 450 mm Bevelled edge

mirror of superior glass mounted of .6 mm th. A.C.

76 5.00 sheet or plywood sheet and fixed to wooden pluge 825.48 No

with C.P. brass screws and washers.(R&B SOR

Provdg. And Fixing Cast C.I.(Span) Nahni Trap

Of The Following Nominal Diameter Of Self

Clenising Design With C.I. Scread Down Or

77 5.00 Hinged Gratiing Incl. Cost Of Cutting & Making, 600.08 No

Good The Walls And Floors 100 Mm Inlet And

Mm Outlet Etc.Comp.(R&B SOR 2023-24 PG NO-

Providing and fixing PVC SWR Nahni trap IS

for drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls. (R&B SOR

Provdg. & fixing plastic seat & cover for wash down

79 0.00 water closet with C.P.brass hinges and rubber

buffers.(R&B SOR 2023-24 PG NO-166,23017)

5.00 (B) plastci seat & cover 288.45 No

Providing and fixing PVC 12.5 Litres high level C..I.

flushing cistern with A pair of C.I. or Mild steel

brackets, womplete with fittings such as syplionic

arrangement, 15mm nominal size brass ball valve

with polythene float, lever G.I. China (60 cm. ) and

pull union and couplings for connections with inlet,

outlet and overflow pipes etc. including cutting

holes in walls and making good the same (overflow

pipe to be measured and paid fo separately ) (R &

B SOR 2023-24, Pg.No.165, I.Code No.23014,)

P/F Jet Spreay at Europeon WC Pan, incl nece.

lath connection, stop cock, and other fixing material

and labour as per inst. of engineer in charge (R&B

SOR 23-24 I.C NO .M738, Pg no.-28)

Providing erecting and fixing double coated ISI

water tank of required capacity each with all

82 2000.00 necessary fittings and connection etc.complete on 3.91 lit

terrace.(R&B SOR2023-24 PG NO.-158,I.C NO-

P&F Door closers (Heavy type of 765 number)

83 5.00 Hardwire or Everite Prabhat or Equivalent. (R&B 516.50 No

Providing & Fixing app. Quality for conseal lock in

84 5.00 alu. Door. As per inst of engg in charge. 300.00 No

Etc.comp.(App.Rate)

Providing & Fixing app. Quality different type of

Brass baby latch(door closer) As per inst of engg in

a 5.00 charge. Etc.comp.(R&B SOR2023-24 ,I.C No. 273.57 No

Locks Godrej Night latch.(R&B SOR2023-24 ,I.C

Latch for steel window 25 cms to 35cms.

c 5.00 Alluminium.(R&B SOR2023-24 ,I.C No. 37.13 No

Latch for steel window 25 cms to 35cms. Brass.

Latch for steel window 25 cms to 35cms. Iron

e 5.00 oxidized. (R&B SOR2023-24 ,I.C No. 27.81 No

P&F Aldrop 20mm. dia Size with necessary fitting

Oxidised(R&BSOR202324,I.CNo.M022,M023,M0

a 5.00 20cms. Length 41.77 No

b 5.00 25cms. Length 46.00 No

c 5.00 30cms. Length 54.48 No

P&F Aldrop 20mm. dia Size with necessary fitting

87 0.00 Alluminium.(R&B SOR2023-24 ,I.C No.

a 5.00 20cms. Length 71.43 No

b 5.00 25cms. Length 73.12 No

c 5.00 30cms. Length 96.85 No

d 5.00 35cms. Length 113.80 No

P&F Aldrop 20mm. dia Size with necessary fitting

88 0.00 Brass.(R&BSOR2023-

a 5.00 20cms. Length 219.73 No

b 5.00 25cms. Length 236.68 No

c 5.00 30cms. Length 249.39 No

d 5.00 35cms. Length 274.82 No

P&F Aldrop 20mm. dia Size with necessary fitting

89 0.00 Brass Chromium Plated.(R&B SOR2023-24 ,I.C

a 5.00 20cms. Length 232.44 No

b 5.00 25cms. Length 245.16 No

c 5.00 30cms. Length 249.39 No

d 5.00 35cms. Length 274.82 No

P&F S.S. Handle for door/ window different size of

90 0.00 ASIS 304 Grade. (R&B SOR2023-24 ,I.C No.(

a 1.00 10 cm Size 57.87 No

b 1.00 15 cm Size 79.05 No

P & F S.S. Stopper of ASIS 304.(R&B SOR2023-

a 1.00 60 cm Long 360.17 No

b 1.00 30 cm Long 180.51 No

c 1.00 20 cm Long 126.27 No

Providing & Fixing In Position Alluminium Doors

With Frame Using Approved Quality Anodised

Extruded Alluminium Section As Approved By

Engg.In Charge(Jindal Alluminium) (A)Frame

Sections 101.6x44.45 Mm(B)Shutter Bottom

Vertical & Top Section 83.5x44.45 (Wt.1.31

Kg/Mt.)(At 1.31Kg/Mt)(C)Shutter Bottom Section

92 5.00 At14.3x44.45 Mm At (1.37 Kg/Mt) Shutter Middle 2900.00 Smt

Section At 100x44.3 Wt.(1.37Kg/Mt)

Incl.Providing & Installing 5 Mm Thick Approved

Color Acrylic Sheet Of Standard Quality Fixed

With Glazing Chips On Upper Pannel &

Laminated Sheet On Lower Pannel (Wtt.0.13

Kg/Rmt) Etc.Comp.As Direction Of Engg.In

Charge. (N.S.) I00134

Providing & Fixing In Position Alluminium

Window Sliding / Fix Type With Frame Using

Approved Anodised Extruded Alluminium Section

As Approved By Engg.In Charge.(Jindal

Alluminium) Units Equivalent (A) Frame Sections

65 X 25 Mm (At 0.41kg/Mt) (B) Sliding Frame

Bottom Section Of 61.85 X31.75 Mm (At

Kg/Rmt) (C) Shutter Top & Bottom Section

40 X 18 Mm (Wt.0.41 Kg/Rmt) (D) Shutter Interlock

Vertical Section 10 X18 Mm.(0.41 Kg/Rmt) (E)

Shutter Vertical Of 40 X 18 Mm (0.41 Kg/Rmt)

Including P/F Installing 5 Mm Thick Approved

Color Acrylic Sheet Of Standard Quality

Etc.Comp.(N.S.)

Provding & fixing Aluminum section partition with

powder coating using 2.5'' x 1.5'' all section work

incl.p/f 5 mm thick glass in upper portion and

mm th. Novapan panel in lower section Work

incl.fixing the partition in wall/floor with

nece.screws,rubber gasket & other fittings

etc.comp. as directed by engg.incharges.

Providing & Fixing In Position Alluminium Vents

With Frame Using Approved Anodised Extruded

Alluminium Section As Approved By Engg.In

Charge.(Jindal Alluminium) Units Equivalent

(Approved Rate) Frame Section Of 63.50 X

38.50Mm (Wt.0.68 Kg/Rmt) Incl.Providing &

Installing 5 Mm Thick Approved Color Acrylic

Sheet Of Standard Quality Etc.Comp. I00136

Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size with

top and bottom rails of T_rin 40x 40 x 6 mm with

38mm dia, steel pulleys complete with bolts, nuts,

locking arrangements, stoppers handles including

applying a priming coat of red lead paint. ( R&B

Providing corrugated 0.80 mm (22 gauge) thick

G.I. sheets roofing fixed with galvanized iron ‘J’ or

‘L’ hook bolts, and nuts 8 mm. dia with bitumen and

G.I. limpet washers filled with white lead complete

excluding the cost of purlines, rafters and

trusses..(R&B SOR 2023-24 PG NO-125,15001A)

Providing valleys 900mm overall in plain 1.6mm

thick G.I. sheet fixed with G.I. J or L Hooks, Bolts

and nuts glavanised iron J or L Hooks Bolts and

nuts 8mm dia G.I. Limpet and bitumen washers

complete.(R&B SOR 2023-24 PG NO-

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S.laths interlocked

together through their entier length & joinned

together at the enda by & locks mounted on

specially design pipe shaft with bracket plates

giudes channel & arrangement for inside & out side

locking with push pull operation incl. the the hood

cover & spring etc. including priming , oil painting

etc complete.(R&B SOR 2023-24 PG NO-

1.50 (A) Shutters having width below 3.5 meter 3469.35 Smt

Provdg. & fixing UPVC handle valve of

100 0.00 Prince,Supreme , Astral, finolex or equivalent make

as per dir. Of engg. In charge.(App. rate)

a 3.50 (A) 15 mm dia 310.00 No

b 3.50 (B) 20 mm dia 360.00 No

c 3.50 (C) 25 mm dia 410.00 No

Provdg. And fixing to wall ,ceiling and floor 6.00 kg.

F/Sq.Cm working pressure polythelene pipes of the

following outside diameter, low, density, complete

with special flange compression type fittings, wall

clips etc. making good wall ceiling and floor. (R&B

a 1.50 20mm dia 78.12 Rmt

b 1.50 25mm dia 100.49 Rmt

P/F. To Wall Ceiling And Floor 10.0 Kgf/Cm2

Working Pressure Pvc Pipes Of The Following

Outside Dia Complete With Special Flange Type

Fittings,Wall Clamps Incl. All Necessary Fittings

Etc. Complete. (At Any Floor Level) (R&B SOR

c 1.50 32mm dia 116.40 Rmt

d 1.50 40mm dia 124.43 Rmt

e 1.50 50mm dia 165.38 Rmt

f 1.50 75mm dia 274.68 Rmt

g 10.00 110 mm dia 332.91 Rmt

Provdg. And fixing to wall, ceiling & floor in true line

and level UPVC pipe Schedule- 40 of Prince

Supreme , astral , finolex or equivalent make as

approved by engg. incharge. pipe shall be fix on

wall with the help of clamp at every twi meter center

103 0.00 to center of shall be concealed as directed in

cluding neccesarry fitting etc. in cluding testing of

pipe and jointd and fixing the same with adhesive

solvent , including cost of all materials of following

nominal bore (R&B SOR 2023-24 ,I.C. NO.

Providing and supplying Lowering, laying and

jointing ISI marked only standard length Stonewate

pipes in standard lengths of following class and

diameter with cement joints in C.M.1:1 proportion

in proper position , grade and alignment at all level

as directed by Engineer-in- charge including

conveyance from stone to site of work, Jointing

104 0.00 material etc.comp. including all taxes,insurance,

transportiton, fright charges, octroi,inspection

charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete (IS -

651 - 1989) Class AA (GWSSB SOR 2022-23)

Part-1&2 A (Material Sec ) It.No.11.1, Class A,

Pg.No.17 + (GWSSB SOR 2022-23) SECTION :

& 2.B - LABOUR It.No.14, Pg.No.40

P/F. to wall ceiling and floor galvanized mild steel

tubes (Medium grade) of the following nominal dia.

105 0.00 with all tube fittings and clamps incl. making good

the wall, ceiling and floor. (At any floor level) (R&B

Providing & Fixing 15 Cm Wide Chicken Mesh Jali

With Nails & Then Application Of 15 Mm Plaster

On R.C.C.& Masonary Joints As Per Dir.Of

Engg.In Charge (N.S.) I00095

Extra rate over item of excavation of earth for

excavation of asphalt pavement of thickness

including demolishing the asphalt

carpet,metal,soiling etc.comp. with stacking the

material as directed.(AMC DRAINAGE SOR JAN-

0.00 upto 0.20 meter thickness (By Manual) 71.10 Smt

Making connection to the ex.M.H.in running sewer

incl. Dewatering and other required machinery etc.

of following dia pipes at any convenient time. All

damaged work shall be well repaired as per

instructions. etc..complete. (a) 150 mm to 300 mm

dia(Based on Drainage SOR 2009-10)

Providing Kachha of Pakka Dummy in the

following dia pipes and removing the same after

completion of the connection work as directed

(Based on Drainage SOR 2009-10)

a 1.50 (A) 100 mm to 300 mm dia. 223.00 No

b 1.00 (B) 350 mm to 600 mm dia 339.00 No

Supplying Pneumatic Breaker Machine for RCC

Slab or Asphalt Demolishing Work on site by using

Operator, fuel, power Supply etc. Complete as

Directed. (No payment should be allowed for non

working condition of machinery and for pipe line

excavation and M.H. work. Allowed only for break

down work) ( Based on Previously approved rate

Supplying Mazdoor for misc. work like Restetment

Pavment, excavation, refilling,

demolishion,levelling work & other miscellanous

work.(AS PER LABER SKILL DEVELOPMENT &

EMPLOYEMENT DEPARTMENT GOG

CIRCULAR DATED 01.04.2023)

Supplying carpenter for repairing doors with nece

material like stopper, hinges, handle, glass etc

comp. as per instruction of Engineer in charge

etc.(AS PER LABER SKILL DEVELOPMENT &

EMPLOYEMENT DEPARTMENT GOG

CIRCULAR DATED 01.04.2023)

Providing fiiter for D.I./P.V.C./C.I./M./A.C. Pressure

water pipe linmaintenance work with necessary

manpower, tools, plants, and equipments, and any

other works required for AMC as per instruction of

Engineer in charge etc. complete. (AS PER

LABER SKILL DEVELOPMENT &

EMPLOYEMENT DEPARTMENT GOG

CIRCULAR DATED 01.04.2023)

Providing and fixing 1.20 Metre high fencing with

2.0 Metre long M.S. Angle posts 40mm x 40 mm x6

mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with

five Horizontan lines and two diagonals of

114 1.50 galvanised steel barbed wire weighting 9.38 Kg. 385.40 Rmt

per 100 Metre, strained and fixed to posts with

G.I,staples including fixing the postsin ground with

0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

complete.(R&B SOR 2023-24 PG NO-156,22001)

Reparing of existing Aluminium

window/door/partition by making necessary

addition/alteration in same sides. Rate incl of

necessary fittings required and all labour included.

If necessary rate also incl. of removing from

position and refixing it at same place after repairing

it, etc comp. as directed. (Sub Desc : As per

approved rate of AMC MET work I01334)

Rapairing Of Door & Window (Wood).It Also

Including Labour Charges For Erection And

116 1.50 Fixing Door Shutter & Frame Etc.And 100.00 No

Necessary Repair As Per Site Condition.(N.S.)

Repairing of Doors/Windows shutters and Frames

including refixing-aligning shutter, providing,

117 1.50 replacing, fixing MS hinges, Aluminium aldrops, 250.00 Smt

stoppers, tadi etc. complete excluding painting as

per specifications.(app.rate)

Providing and Laying of Rubber Moulded Paver

Block Grey/Coloured 60 mm thick, M-35 Grade of

any size ; shape (Usually Uni-Paver Blocks) using

black trap good quality aggragate of 20 mm

nominal size for footpath, parking areas, service

lanes and other areas as mentioned in the

drawing / instruction of engineer in charge. Cost

includes formworks using rubber mould, Rate

providing and laying paver blocks as per required

grading and specification. The paver block shall be

mechanically compacted. The work of paving

118 10.00 blocks shall be executed in line and level by skill 501.60 Smt

mason of flooring work only. It should be laid in

such a way that the no cutting of the paver block to

be necessary. if cutting of paver block necessary

then it should be cut by machine only and carting.

The finished surface of the paver block shall have

resonably good, plain finished. Paver blocks shall

be compacted and shall be relaid if necessary.

Gravel or such type of materials shall not be

allowed for production. Laying on 5cms thick

sand beddding. (Approved Rate by Road

Providing & Fixing Door hinge spring include with

119 1.50 necessary all fixtures as dircted by engg.in charge 1175.00 Smt

etc.comp. (app.rate)

Providing & Fixing wall,ceiling and floor

Kg.F/Sq.Cm 160 mm working pressure polythelene

pipes of low density, complete with special flange

compression type fittings,wall clips etc.making

good wall ceiling and floor as directed by engg.in

charge etc.comp.(app.rate)

P/F. 10 mm thick Novapan sheet of approved

quality including fixing on partition with necessary

all fixtures as directed by engg.in charge etc.comp

Labour charges for removing of Alum. Door /

partition / Alum. Window / M.S Grill etc. (app.rate)

Providing, Fabricating and Erecting in position

anodised (15 to 25 micron of desired colour) door

shutter (double action opening) of standard

aluminum section from 18mm (3/4”) series of Jindal

or approved equivalent make of size top and

vertical style 47.62 x 44.45 x 2mm ( w approx =

1.05 kg./m), lock rail and bottom section 114.30 x

123 1.00 44.45 x 2mm ( w approx = 1.83 kg/m), fitted on 4515.28 Smt

frame of size 101.60 x 44.45 x 2mm ( w app =

kg./m) with standard accesories like handle

stopper, locking arrangement, C.P. brass hinges,

etc, and glazing of 5 mm thick float glass of Mody

or approved equivalent , fixed with rubber / PVC

beading in upper and lower panel complete.

Providing, fabricating and erecting in position

anodised (15 to 25 micronof desired colour)

aluminum fixed glass windows / partitions made up

from standard aluminium section from 18mm (3/4“)

series of Jindal or approved equivalent make of

size 47.62 x 44.45 x 2mm (w app = 1.05 Kg/m),

124 3.00 fitted on frame of size 64 x 40 x 2 mm ( w app = 2932.00 Smt

1.09 Kg./m) with all standard accessories and

glazing of 5mm thick flaot galss of Mody or

approved eauivalent , fixed with rubber / PVC

beading etc. complete as per details including all

fittings and fixtues & locking arrangement

completes. (app.rate)

Pro. And fixing single layer water proof gypsum

board 12.5 mm thick sections using water proof

board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm

x 3 mm with intermediate channel og size 18 mm x

40 mm x 0.8 mm at 1220 mm center to center

ceiling section of size 40 mm x 35 mm x 0.55 mm

125 8.50 at 457 mm c/c and perimeter channel A of size 20 600.94 Smt

mm x 27 mm x 30 mm x 0.5 mm at edges & drops

incl.paper tap sand sofit cleat, anchor fastener,

scoch bolt connecting cleat,joining compound top

coat on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as

directed(At any floor level) (R&B SOR 2023-24 PG

GLASS FILMS (sun control, Safety film, decorative,

reflective, frosted, opaque film etc) Imported

Lumaar make as approved by engg.in charge

etc.comp. (app.rate)

Providing and fixing 4 mm th. Acrylic sheet of

approved quality including fixing with door/window

shutter & frames with necessary all fixtures as

dircted by engg.in charge etc.comp. (app.rate)

Repairing of Spalling in concrete with modified

cement mortar & SBR including surface

preparations and applying bonding coat and rust

converter of approved brand etc. comp. including

scaffolding, finishing with cement slurry As directed

Providing & Fixing Floor Spring including fixing

129 1.00 shutter etc. complete as per inst. of engineer in 3300.00 No

charge. (app.rate)

P/F. thermocol ceiling with necessary aluminium T

section 25 x 25 x 1.2 mm inclusive fixing it to all wall

to ceiling junction and at junction position of two

130 1.50 sheets ,item also includes p/f 20 mm thick plain 375.00 Smt

thermocol sheets size (1 x 0.5 mt) with all

necessary fastening and hardware etc. comp.as

dire. (At any floor level) (app.rate)

Removing dry or oil bound distemper by a washing

and scraping and sand papering the wall surface

smooth including necessary repairs to scratches

complete.(R&B SOR 2023-24 PG NO.-134 18014)

Extra over item for removing dry oil bound

132 7.00 distemper on ceilings and sloping roofs.(R&B SOR 1.58 Smt

Distempeing (Two coats) with oil bound washable

distemper of approved brand and manufacture and

of required shade on wall surfaces to give an even

shade, over and including a priming coat with

distemper primer of approved brand and

manufacture after thoroughly brushing the surface

free from mortar dropping and other foreign matter

and also including preparing the surface even and

sand papered smooth..(R&B SOR 2023-24 PG

Extra over Item for every subsequent coat of

134 5.00 approved brand and manufacture.(R&B SOR 30.09 Smt

Extra over Item or distempering with oil bound

135 5.00 washable distemper on celling and sloping 8.04 Smt

roofs.(R&B SOR 2023-24 I.C.NO. 18025)

Wall painting (two coats) with plastic emulsion paint

of approved brand and manufacture on

undecorated wall surface to give an even shade

136 3.50 including throughly brushing the surface free from 78.44 Smt

mortar droppings and other foreign matter and

sand papered smooth.(R&B SOR 2023-24 PG

Extra over item for every subsequent coat of wall

137 3.50 painting with plastic emulsion pain of approved 33.39 Smt

brand.(R&B SOR 2023-24 I.C.NO.18032)

Extra over item 119 for painting with plastic

138 3.50 emulsion paint of approved brand on ceilings and 2.21 Smt

sloping roofs.(R&B SOR 2023-24 I.C.NO.18034)

Applying two coats of Birla (white cement based) or

Asian (acrylic lapy- putty) or equivalent & two coats

of primer of approved brand and manufacture on

new wall surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand

papered smooth.(R&B SOR 2023-24 PG NO.-139,

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete(R&BSOR 2023-

Providing and Fixing 6 mm thick Lexan

Polycarbonate multi wall roofing sheet fixed with

hilti screw and rubber silicon sealer and alluminium

strip of size 50 x 3 mm etc complete as directed by

Engineer in charge. (R&BSOR 2023-24 PG NO.-

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

142 1.50 cleaning the surface an even shade including 86.94 Smt

cleanicn the surface of all dirt, dust and other

foreign matter.(R&B SOR 2023-24 PG NO.-136,

Painting two coats (excluding priming coat) on new

wood and wood based surface with enamel paint,

interior to give an even shade including cleaning

the surface of all dirt, dust and other foreign matter

sand papering and stopping.(R&B SOR 2023-24

Painting Two coats (excluding priming coat) on

previously painted steel and other metal surface

with enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and

other foreign matter.(R&B SOR 2023-24 PG NO.-

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface

145 1.50 with enamel paint, to give an even shade including 55.13 Smt

cleaning the of all dirt, dust and other foreign

matter.(R&B SOR 2023-24 PG NO.-137, 19012)

Labour charges for cleaning U.G. & O. H. tank by

modern science technology with six stage process

as below (1) Dewatering existing water by

submersible pump. (2) Hydrojetting by 150 kg. per

sq.cm pressure. (3) Vaccum cleaning to suck the

sludge & Turbidity on bottom surface (4) Heat air

system by 80 degree c. tmp. for drying corners &

all sides of tank. (5) Anti bacterial chemical

spraying to all surface of tank and then (6) Ultra

violet radiation pan Treatment to tank in this six

stages on site classic supply etc. shall be provided

by Muni. Corporation. without charging any extra

cost. The complete tank ckeaning by mono

cleaning systems as directed, rate of above

process are as below capacity of tank. (Approved

Providing and fixing of mirrors of 5 mm thick on

walls of wash basin counters , toilet area etc,

including all hardware and fixing details and

147 1.50 position as per consultant design and drwaings of 2281.00 Smt

the consultant, as directed and to the satisfaction

of the Consultant / Engineer in charge. (Approved

Supplying and installation of 10mm thick recycled

rubber flooring having anti-skid and sound

absorbing properties, square shaped, with different

color optns for create flooring pattern, should be

148 10.00 installed with proper adhesive as per 1234.00 Smt

manufactures's guidelines, joints of surface to be

done properly to prevent dirt & watepenetration

inside the surface. etc complete as per instruction

of engineer in charge (Approved Rate)

Providing and Fixing Metal Jali, making of Wooden

149 1.50 Patti Frame of size 25 mm x 25 mm for Ventilation 1437.00 Smt

etc. complete as directed. (Approved Rate)

Providing and fixing 35mm thick flush shutter for

doors, windows & clearstory windows incl. Indian

teak wood frames 12 cm x 7 cm including anodized

150 0.00 alluminium fixture and fastenings incl. primer coat

of approved quality and two coats of oil painting

etc. complete.(Fully pannele or partly panneled and

partly galzed door) (Approved Rate)

1.00 Flush shutter with both side laminate 4800.00 Smt

Arrangement of zula with two or nece. skilled

labour for repairing & maintenance work out side

building work etc.complete as per insructer

incharge(At any floor level) (Approved Rate)

Providing Scaffolding for Demolition Plaster Work

& painting work by 'H' Frame Stand of by any

means like bamboo, balli etc. including carting

152 10.00 material work site and removing after completion of 40.00 Smt

work. Rate include any type rent etc. complete for

any height as directed by engg. in charge.

(Approved Rate)

P/F of 1/2 HP submersible pump in

underground water tank with necessary

153 1.00 connection, starter,electrical fittings and water 9200.00 No

level controller (ISI marked )(R & B Electrical

SOR Section 9-4-1(a)

Providing, Manufacturing, Fixing Chain Link Jali

8".0" X 4".0" as per detailed Sketch & instruction of

Engineer in Charge same as Lal Darwaja Garden

Pattern Consisting of 3" dia MS pipe A class 5".4"

height fixed at 8".9" in C.C. (1:2:4) block of 9" X 9"

X 9" size chain link jali 2" X 2" X 10 gauge fixed in

35 X 35 X 5 mm MS angle frame of 8".0" X 4".0"

size with MS flat of size 25X3 mm welded with jali

etc. Comp. The Jali is to be Welded to MS angle

with MS Flat as per instruction given. The MS Pipe

Jali, MS angle frame are to be painted one coat of

primer & two coats of paint as directed, in line and

level.The two hold fast has been welded at equal

distance at the bottom angle of jali for support fixed

in C.C. as directed by Engg. in Charge. (Approved

Supplying & Fixing of bird protection net made from

co-polymer nylon net (U/V stabilised) having yarn

155 30.00 breaking strength 23.08 kg. including Necessary 422.18 Rmt

scaffolding etc complete as per instruction etc.

complete as directed. including all tax (App Rate)

The Rates are Exclusive of GST. Prevailing GST will be paid separately.

Contractor’s Quoted Rate

IN FIGURE IN WORDS

Net Quoted Tender Amount Rs.

Seal and Signature of the Bidder Add. City Engineer

mobile no. (South Zone)

AHMEDABAD MUNICIPAL CORPORATION

"South Zone Office", Opp. Fire Station, Rambaug, Maninagar, Ahmedabad - 380

Municipal Commissioner invites online Percentage Rate sealed tenders from interested contractors for

the work mentioned below.

1 Name of work Repairing work and Civil Work as per requirement at diff.

municipal buildings under Diff. Budget and Buildings Related

Works in Khokhra ward of South Zone.(ARC)

2 Time Limit 12 Months (Excluding Monsoon)

3 Tender Validity Period 120 days from the date of submission of the tender

4 Eligibility Criteria Register “E2” class in PWD in Govt. R&B/CPWD/AMC or

equivalent registration with any other state Govt. or institutions.

5 Estimated Cost put to Rs. 9,99,999.00/-

6 Earnest Money Deposit Rs.10,000.00/- Demand Draft Or Bank Guarantee in favour of

Municipal Commissioner, Ahmedabad to be submitted as prescribed

7 Security Deposit 5 % of the Tender Amount in form of Bank Guarantee / Demand

Draft in favour of Municipal Commissioner, Ahmedabad to be

submitted as prescribed in tender.

8 Tender fees Rs.900.00/- Demand Draft in favour of Municipal Commissioner,

(Non refundable) Ahmedabad)

9 Submission of EMD and In separate sealed cover each for EMD and Tender Fees along with

Tender Fees Tender as described in the invitation of tender and submitted to

Assistant Manager (South zone), South zone office, Rambaug,

Maninagar Ahmedabad.

10 Tenders issue date Tenders from the amc.nprocure.com website shall be downloaded

from AS PER TENDER NOTICE INVITED

11 Last date of receiving As per Notice inviting Tender / Addendum / Corrigendum. The

Tenders. tenders received after latest schedule date and time will not be

entertained under any circumstances.

12 Date of Opening As per Notice inviting Tender / Addendum / Corrigendum to

Assistant Manager / Dy.C.E.(S/Z) office, 2nd Floor, South Zone

Office, Opp. Fire Station, Maninagar, Ahmedabad-380008

13 Mode of sending the Document shall be submitted in sealed envelope systems By

Tender Documents RPAD/Speed post/ Hand Delivery in sealed covers in Duplicate ( One

Original & One Duplicate) duly sign & seal by contractor .

14 Terms, Condition, & All general condition of contract mentioned in tender shall be

Specification applicable.

15 Defect & Liability The contractor shall be responsible to make good and remedy at this

Period own exppence any defect which may developed or may be noticed

before the period mentioned here under from the certified date of

complition, The within 15 days of recipts of the notice. In the case of

failure on the part of the contractor, the Engineer incharge may rectfy

or remove or reexecute the work at the risk & cost of the contractore.

The Engineer incharge shall be entitled to appropriate the whole or

any part of the amount of security deposit towrdes they expences, If

any, incurred by him in rectification, removal or re- execution. The

defect liability period shall be as under (a) for all works costing up to

Rs. 50,000 (amount put to tender), the period shall be three months

from the cirtified date of complition. (b) for all works costing more

than Rs. 50,000 and upto Rs. 1 crore (Amount put to tender) ,the

period shall be six (6) month from the cirtified date of compition or

one monsoon , which ever letter.(c) the major project costing more

than Rs. 1 crore , the period shall be 12 months from the cirtified date

of complition which should include one monsoon.(d) For building

works , the period specified in (a) ,(b) & (c) above or elapse of

monsoon period following cirtifide date of complition.,whichever is

letter . For the purpose of deciding the monsoon period, the

september may be treated as the last date.

16 Compansation for Delay 10 % of the balance work after Time limit expired as Peta Work

17 Deduction of Retention Retention @ 2% of the value of work done will be deducted from

Money from each RA each RA bill. It will be released along with release of payment of

Bill Final Bill.

18 Addendum/Corrigendum Addendum/Corrigendum If any Shall be Published 48 Hrs. Price To

the Final Submission Time And Date. The Same Shall From a part

Of Tender And The Same As to be Attached Along With The Tender

19 For E.P.F. Act. As per Account department cicular no.37, date-09/08/2018

20 GST As per AMC Finance Department Circular No. 38 dated 21-11-2022.

The Rates are Exclusive of GST. Prevailing GST will be paid

Conditional tenders will not be accepted. Municipal Commissioner reserves the rights to reject any or

all the tenders without assigning any reasons thereof.

Seal and Signature of the Bidder Add. City Engineer

ftuLx[tfxhle mne - rm¬tu એડી. િીટી ઈજિેર

btuctEj lkch mt&u (œrûtK Ítul)

Seal and Signature of the Bidder ADD. CITY ENGINEER

Seal and Signature of the Bidder ADD. CITY ENGINEER

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

General terms & conditions

1. A booklet of FORM B-1 of Gujarat State Roads & Building Department / Water Resources

Department with the latest correction slips may be referred for quality of construction &

standard of Procedure (SOP). (only English version)

2. In the specification “as directed" / "approved" shall be taken to mean "as directed /

"approved" by the Engineering in charge.

3. Wherever a reference to any Indian standard appears in the specifications, it shall be taken

to mean as reference to the latest edition of the same of force on the date of agreement.

4. In "Mode of measurement" in the specifications wherever a dispute arises in the absence of

specific mention for a particulars point / aspect, the same in the relevant Indian Standards

shall be referred to.

5. All measurement and computations, unless otherwise specified shall be carried out nearest

to the following limits :-

i) Length, width and depth, Height 0.01 Meter

ii) Areas 0.01 Sq.mts.

iii) Cubic contents 0.01 Cu. mts.

In recording dimensions of work, the sequence of length, width and height (Depth) or

thickness shall be followed.

6. Definite particulars covered in the items of work, though not mentioned or elucidate in its

specifications shall be deemed to be included therein.

7. Approval of the samples of various materials given by the Engineer in charge or AMC's

Consultant shall not absolve the contractor from the responsibility of replacing defective

materials brought on site or materials used in the work found defective at a later date. The

contractor shall have no claim to any payment or compensation whatsoever on account of

any such materials being rejected by the Engineer in charge.

8. The contractor’s rate for the item of work shall be for the work completed in all respect.

9. All materials including those of electrical shall be got approved by the Engineer in charge/

Architect before using them in the work.

10. Materials as and when rejected by the Engineer in charge or AMC's Consultant shall be

removed from the site of work within 24 hours.

11. All work shall be carried out in a manner applying the best technique.

12. All tools, templates, machinery and equipment for correct execution of the work as well as

for checking lines, levels, alignment of the works & all precautionary measures during

execution shall have to be kept in sufficient numbers and in good working condition at the

site of the work.

13. Special modes of the construction not adopted in general Engineering practice, if proposed

to be adopted by the contractor shall be considered only if the contractor provided

satisfactory evidence that such special mode of construction and completion of work to the

required strength and quality. Acceptance of the same by the Engineer in charge shall not

however, absolve the contractor from the responsibility of any adverse effect and

concordance of adopting the same in the course of exaction or completion of the work.

14. The contractor shall be responsible for observing the rules and regulation imposed under the

"Minor Mineral Act", and such other laws and rules prescribed by the Government from time

15. All necessary safety measures and precautions (incl. those laid down in the various relevant

Indian Standard) shall be taken to engrave the safety of men, materials and machinery on the

work and also of the work itself.

16. Quantity measured in the tender is approximate. It may increase or decrease looking to the

quantum of actual work for which no any claim shall be entertained by A.M.C.

17. Contractor shall have to execute extra item if required only after necessary permission from

18. The work in general shall be carried out as per standard specifications of the relevant items

to be executed & as per the instruction of Engineer in charge & as per the guidance of AMC's

Consultant for this project.

19. The general terms & conditions of the contract shall be applicable & shall be binding on the

contractor. The contract agreement shall have to be executed between AMC & the agency to

which work is awarded for execution.

20. The time limit shall be reckoned after next day from the date of issue of the written work

order to the contractor after fullfillng the formality life SD & Agreement. No time extension

will be granted under any circumstances.

21. In case of any ambiguity in specifications mentioned in this tender, the interpretation given

by Add. City Engineer /Dy.M.C of A.M.C. will be final and binding to the Contractor.

22. The contractor shall take no advantage of any apparent error or omission in drawing or

specification and the Engineer -in-charge shall make such corrections and interpretations as

necessary to fulfill the intent of the plants and specifications.

23. The quantities of items in BOQ (Bill of Quantities) may vary in case of necessity arises.

24. All prevailing taxes/duties chargeable by State Govt./Central Govt. and the Municipal

Corporation. will be payable by the contractor.

25. No any kind of price rise / price escalation / price variation for cement , steel or labour shall

26. Contractor is requested to see the site physically before tendering. He is also requested to

quote the rates keeping in view of all the points mentioned in relevant pages of tender

27. Water Supply: The contractor shall arrange at his own cost, a suitable supply of piped water

for the construction of the works and provide a satisfactory supply of potable water for

drinking, washing, sanitation and cleaning down. The contractor will be responsible for all

the costs where applicable of connection, meter installation, water consumed, water required

for testing purposes, disconnection and the laying, maintenances and ultimate removal of any

distribution system around the site.

28. Electricity: Electric supply will be made available at the site by the Contractor and the

contractor must make his own arrangements with the Corporation and Electricity Supply

Authorities and with other contractors to connect and to take a supply from such services,

paying all costs in connection therewith.

The Contractor shall be entitled to use supply Electricity as may be available on the site for

purpose of the work and shall pay such charges as is fixed by the appropriate supply

In case there is any delay in supply of power site of any interruption or fault in the power

during the work. No compensation shall be paid for idle labor staff, machineries and for use

of diesel operating sets etc. as the case may be.

29. Tenders shall submit all the valid/certified documents in support of their initial/eligibility

criteria mentioned above along with the bid. They shall have also to submit the income tax

clearance certificate and solvency certificate.

30. No advance such as secured advance machinery advance, mobilization advance or materials

advance will be given.

31. The contractor shall get the electrical works executed through the authorized Government

approved licensed electrical person or firm in appropriate category in accordance to

contractual provisions.

32. The electrical works shall be carried out strictly in accordance with the directives issued by

Engineer in charge.

33. Contractors shall not have any dispute or claim for any kind of compensations

(i) If the quantity stipulated in the tender items varies or the scope of work changes &

thereby total amount of work increases/ decreases.

thereby total amount of work increases/ decreases.

(ii) If the work gets delayed/ postponed for some administrative/ technical decision what

34. In case of any dispute, decision of Municipal Commissioner shall be final and binding on the

35. Tenders which do not fulfill all or any of conditions or are submitted incomplete in any

respect will be rejected. Municipal Commissioner reserves the right to increase/decrease the

scope of work. No any claim to that effect shall be entertained. The Municipal Commissioner

also reserves the right to reject any or all the tenders without assigning any reason thereof.

36. The contractors are requested to quote their rates considering above tender conditions.

37. The contractor shall have to paid balance Security Deposit within 10 days from the date if

issue of Letter of Interest (LOI). And after paying the balance S.D. the time limit will be

started & Execution of Agreement to be done than after.

In case of delay in paying balance S.D. by more than 10 days penalty at the rate of

0.01% of sanction tender amount per day will be deducted from the Bill.

Eventhough in special case, If work is not started because of monsoon or any other

special reason (like site is not available), after evaluation of situation the actual date of

starting of work will be consider after approval of Dy.M.C. (South zone)

38. The Contractor shall not claim for increase or decrease in the quantity of the item or the scope

39. The payment shall be made as per the A.M.C policy for the work done by the contractor.

40. Conditional tenderes will not be accepted.

41. The Contractor must be followed the rules and regulations for COVID-19 as per guidelines

published by WHO/ Center government/State government /Ahmadabad municipal

Signature of contractor with seal Add. City Engineer (S.Z)

Date Ahmedabad Municipal Corporation

FORM OF BANK GUARANTEE

(hereinafter called the Tenderer) is desirous and preferred to tender for works in accordance with

the terms and conditions of tender for the work of

1 .Therefore. We hereby affirm that -we are guarantors on behalf of the Tenderer up to

(in figures) and we undertake to pay to Municipal Commissioner, Ahmedabad Municipal Corporation,

A'bad specified up to his first written demand, without demur without delay and without the necessity

of a previous of judicial or administrative procedures and without the necessity to prove to the Bank the

defects or short comings or debits of the contractor any sum within the limit of

2. We further agree that the Guarantee herein contemned shall remain in full force and effect during the

period that would be taken for the acceptance of tender.

However unless a demand of claim under this guarantee is made on its in writing on or before the

(Date to be specified will not he less than 180 days from the stipulated date of receiving the tender) we

shall be discharge form all liabilities under the guarantee thereafter.

3. We undertake not to revoke the guarantee during it currency except with the previous consent of the

Municipal Commissioner, Ahmedabad Municipal Corporation, A'bad in writing.

4. We lastly undertake not to revoke the guarantee for any charge in constitution of the Tenderer or of

Date: Signature & Seal of Guarantor...........................

5. The contractors shall have to furnish income tax clearance certificate before his tender is accepted

and intimate assessment number and ward under which he is assessed.

6. Copies of certificate as regards previous experience, if any, must accompany the tender.

Signature of Contractor ADD.C.E.(S.Z) Dy. Municipal

Commissioner (S.Z)

Date Ahmedabad Municipal Corporation

TENDER DECLARATION FORM

The Deputy Municipal Commissioner,

South Zone, Ahemedabad

Name of Works: - Repairing work and Civil Work at Diff. Ren Basera as per requirement in

Khokhra ward of South Zone.(ARC)

I/We the undersigned have carefully gone through and clearly understood the Tender documents for the

above work. I/We have satisfied myself/ourselves as to the location of site, examined drawings. I/We have visited

site & fully acquainted with local situations regarding materials, labours & others factors pertaining to work

before submitting tenders.

I/We do hereby offer to execute and complete the whole of the work within the time specified all in

accordance with the specification, designs, drawing and instruction in writing referred to in the said document

and with such materials as are provided for, at the respective rates which I/we have quoted in the schedule-B or

at such other rates as maybe fixed under the provisions of these conditions.In the event of this tender being

accepted I/We agree to enter into an agreement and when required andexecute the contract, according to your

fom1 of agreement as or in default where of I/we bind myself/ ourselves to forfeit the "Earnest Money Deposit."

I/We understand that if I/WE shall not enter in agreement within ten days or decided by AMC from the

date of receipt of letter of acceptance, you will forfeit the earnest money paid by me/us and take necessary

action as deemed fit.

I/We have enclosed a DEMAND DRAFT or PAY ORDER as an “Earnest Money Deposit", for the sum

as mentioned in tender notice, the full value of which is to be absolutely forfeited to the Employer If I/We fail to

commence the work specified. Otherwise the said sum shall be retained, by the Employer as on account of such.

Security)' Deposit'.' as provided for in the aforesaid documents.

I/We agree not to employ sub-contractors other then those that may be approved in accordance with

Conditions in the aforesaid documents.

I/We understand that you are not bound to accept the lowest or any tender which you may receive.

I/We am/are bound to execute the job if the work order is issued within 120 days from the date of

opening of the tender.

I/We agree to pay the Government income-Tax, Sales-Tax (Central and State) ,Sales Tax on work,

octroi duties and other prevailing Government taxes/charges on such items on which the same are leviable and

therates quoted by me/us are inclusive of the same.

Yours faithfully

Signature of the contractor

ybœtJtœ BGþrlrmvj ftuvotuhuNl

ÆÂûtKÍtul - Esluh Ftðþ

1. mbgbgto>t ykdu yuj.ytu.ytR. ytÃgt ctœ 1૦ rœJm mw^ebtk sÁhe me¾gtuhexe rzvtuÍex Che ðgth ctœ&e dKJtbtkk ytJNu. <ubs

ðgth ctœ Jfo ytuzoh R~gw &gu&e mbtg bgtoœt NY &guje dKtNu. <&t <u mt&u fhthvºt fhJtltu hnuNu. ylu <u bwsc ftb NÁ fhJtle

<theF dKJtbtk ytJNu. yuj.ytu.ytR. ytÃgt ctœ me¾gtuhexe rzvtuÍex ChJtbtkk rœl -1૦ fh<tk J^w rJjkc ltk rfMmt btk <ubs Jfo

ytuzoh ytvu&e ftb NY fhJtbtkk rJjkc &gu&e «r<rœl bkswh xuLzh hfbltk 0.01 % juFu vulÕxe cej btk&e ftvJtbtk ytJNu. <ub A<tk

rJrNÐ rfMmt btk atubtmt ltk fthKu y&Jt yrlJtgo fthKtumh ftb NÁ &R Nfu <ub l ntug <u rfMmt btk gtuøg<t aftme zu.Bgw.frb©h

(œ.Ítul) le bkswhe bu¤Je ftb NÁ fhJtle <theF dKJtbtk ytJNu.

2. xuLzh Jujezexe 1૨0 r>Jm Mþ^ele hnuNu.

3. xuLzh Ch<e JF<u yluoMxble ChJtle hnuNu.

4. S.yum.xe. «J<obtl œh «btKu yjd&e awfJJtbtk ytJNu. xuût fu yLg ftuE vK mhfthe fhJuht ChJtle sJtc>the ftuLx[tfxhle

5. htsg / fuL÷ mhfth©elt JF<tuJF<lt ftg>t Bþsc su ftuE hfble fvt< fhJtle &Nu <u bwsc ftuLx[tfxlt cejbtk&e fvt< fhJtbtk

6. juch JuÕVuh Vkz btxu ntjbtk htsg mhfth©eyu fhuj nwfb Bþsc 1% (yuf xft) hfb cejbtk&e ftve juJtbtk ytJNu.

7. bxehegj xuMxekdltu xuMxekdltu FhuFh &guj Fao ftuLx[tfxh©e vtmu &e Jmwj fhJtbtk ytJNu.

8. ftb ytv<e JF<u su <u ftuLx[tfxhLþk hSMx[uNl ægtlbtk htFelu <ule bgto>tbtk ftb ytvJtbtk ytJNu.

9. yt xuLzh su <u Jdolt btLg gtœe lt ftuLx[tfxhtu Che NfNu. dJobuLxlt btLg ftuLx[tfxhu y.BGþ.ftuvotu.btk btLg ftuLx[tfxhtu le gtœebtk

hSMxuNl fhtJJtLþk hnuNu.

10. yt Wvhtk< y.BGþ.ftuvotu. lt slhj ftuLx[ufx fLzeNl ylu xuLzhle Nh<tu ck^lf<ot hnuNu. su BGþrl.ftuvtuohuNl Juc mtEx

www.ahmedabadcity.gov.in Wvh Bþfuj Au.

11. ftuLx[tfxh lu vubuLx - hl´dcej BGþrl.ftuvot.u lt su <u atÕþ mbglt mhfGþjh Bþsc fhJtbtk ytJNu.

12. Nh<e xuLzh MJefthJtbtk ytJNu lrn.

13. xuLzh MJefthÔþ, h> fhÔþ, ftulu ytvÔþ ylu fgt CtJ&e ytvÔþ <u ykdu zu.BGþrl.frbNlh©eltu rlKog ytFhe hnuNu.

14. >huf ytExbltk MvuNeVefuNl ftuvtuohuNlltk bkswh &guj MvuNeVefuNl Bþsc <&t RLzegl MxtLzzo ftuz ytuV «ufxem ltkk btLg ^tht ^tuhKtu

Bþsc hnuNu ylu zu.mexe yuLSlegh©eltu rlKog ytFhe hnuNu. Jtuxh´d fhJtbtk lrn ytJu fu >hhtus J^thtltu zucheÍ WvtzJtbtk lrn

ytJu <tu ftuLx[tfxhltk Fauo ylu òuFbu Jdh ltuxemu Jtuxh´d fhtJJtbtk <&t zucheÍ WvtzJtbtk ytJNu ylu cejbtk&e hfb ftve juJtbtk

15. yufe JF<u yuf fh<tk Jæþ søgtytuyu ftbNY fhJtltu Jfoytuzoh b¤u <tu ftb yuf mt&u s yuf s c<tJuj søgtyu fhJwk vzNu. yuf ftb

ÃþÁ &tg vAe cesw ftb NY fheyu <uÔþk atjNu lrn.

16. atÕþ ftbu ftuEvK mrJom jtEllu LþfNtl l &tg <u he<u ftb fhÔþk vzNu, òu ftuE mrJom jtEl lu LþfNtl &Nu <tu <ule mk ÃËKo sJtcœthe

(òlbtjle) ftuLx[tfxhle vtu<tle hnuNu. mtEx vh ftb œhBgtl bswh fu sl<t lt ftuE btKmlt òlbtjlu lwfNtl &tg <ule

sJtcœthe ftuLx[tfxhle hnuNu. vtujem Vhegt> &tg <tu <ule sJtc>the vK ftuLx[tfxhle hnuNu. CuFz ^me l vzu <ule sJtc>the vK

vtujem Vhegt>btk ftuLx[tfxhle hnuNu. CuFz ^me l vzu <u btxu mjtb<elt vdjtk (suJt fu >tuhzwk ctk^e bsqh Ftztbtk W<thJt, mtuh´d

ylu Mx[x´d fhJt rJduhu) je^t Jdh bsqhlu Ftztbtk W<thNu <tu ftuLx[tfxh s vtujem Vhegt>btk sJtct>h hnuNu ylu BGþrl.ftuvtuohuNlltu

ftuEvK MxtV ytlt btxu sJtc>th hnuNu lrn. ytxÕþk mbSlu s xuLzh ChÔþk. Btswhtultu rJbtu vK W<thtJJtu.

17. juch yufx «btKu <ubs Bgw. frb§h©eltkk vrhvºt lkch 81 <t.26.02.2015 bwsc <btb juch / bsqhtulwk dwsht< rcÕzekd yuLz

y^h fLMx[[fNl Jfombtkk VhSgt< hSMx[uNl fhtJJt ykdu ybj fhJtltu hnuNu <&t fuxjt juch jtJNtu <u vK sKtJJtLþk hnuNu. juch

yufx «btKu ftgoJtne lrn &E ntug <tu <u btxu ftuLx[tfxh mkÃËKovKu sJtc>th hnuNu. ylu <ulu vubuLx ytvJtbtk ytJNu lrn <ubs ct¤

bswhtulu ftb Wvh htFe NftNu lrn. <ubs JF<tu JF< Bgw. frBNlh©e îtht fhJtbtkk ytJuj mh¾gwjhtule Nh<tu ftuLx[[tfxhlu ckk^l

18. ftuEvK ftgœtfeg jexeduNl ybœtJtœ Nnuhle ftuxobtk hnuNu.

19. ftuE fthKmh òu ftuLx[tfxhlu ftb l ytve Nftg <tu <u ykdu ftuLx[tfxh ftuEvK «fthltu LþfNtle- J¤<hltu n¬ >tJtu fhe NfNu lrn fu

ftg>tfeg ftgoJtne yt ykdu &E NfNu lrn. xuLzh bkswh &gtltu y&o ftb ytve s >uJtLþk Au <uJtu &E NfNu lrn.

20. ytuVh y&Jt xuLzhbtk œNtoJuj ytRxbltu sÚ&tu mkCrJ< sÚ&tu Au subt atjw ftb œhBgtl VuhVth &Jtle N¾g<t hnuje Au.

21. M&¤ vrhÂM&r< / sYhegt< Bþsc ftb fhtJ<t xuLzhbtk sKtJuj fJtuLxexebtk J^ Dx &Nu <tu <u ykdu ftuLx[tfxh îtht ftuEvK «fthle

J^thtle ltKtkfeg btkdKe fhe NfNu lrn. ylu ftb ytuAw &tg <tu ftuLx[tfxhle J¤<hle btkdKe MJefthJtbtk ytJNu lrn.

22. mtEx vh jtJJtbtk ytJuj btjmtbtl hesufx fhJtbtk ytJu <tu ðþhk< r>l-1btk vh< jE sJtltu hnuNu. yLg&t ftuvtuohuNl îtht <u

hesufx btjltu rlftj fhe >uJtbtk ytJNu ylu <ule LþfNtlele sJtc>the ftuLx[tfxhle hnuNu.

23. su ftuLx[tfxh vtmu bswhtultu rJbtu, ydtW&e W<htÔgtu ntug <ublu «t^tLg ytve ftb ytve NfNu.

24. bsqhtu fu htn>theytulu ftuEvK «fthltu yfMbt< &tg <tu <ule vtujem ftgoJtnele fu juch yufx bwscle ftgoJtnele sJtc>the

yb.BGþrl.ftuvtuo.lt fboatheytule ftuEvK he<u hnuNu lrn.btºt ftuLx[tfxh s yt btxu sJtc>th hnuNu. bswhtulu dbçËx, nuÕbux nt&ltk

btuò rJduhu ftuLx[tfxhu VhSgt< ytvJtltk hnuNu. bswhtu <&t MþvhJtEÍ fu Bþft>bltu rJbtu vK W<thJtltu VhSgt< hnuNu. juch yufx

Bþsc ltuk^Ke fhtJe <ult rlgbtuLþk vtjl fhJt ftuLx[tfxh ck^tguj hnNu. ct¤ bswhtu htFe NftNu lrn.

25. bsqhtu fu htn>theytulu ftuEvK «fthltu yfMbt< &tg <tu <ule vtujem ftgoJtnele fu juch yufx bwscle ftgoJtnele sJtc>the

yb.BGþrl.ftuvtuo.lt fboatheytule ftuEvK he<u hnuNu lrn.btºt ftuLx[tfxh s yt btxu sJtc>th hnuNu. bswhtulu dbçËx, nuÕbux nt&ltk

btuò rJduhu ftuLx[tfxhu VhSgt< ytvJtltk hnuNu. bswhtu <&t MþvhJtEÍ fu Bþft>bltu rJbtu vK W<thJtltu VhSgt< hnuNu. juch yufx

Bþsc ltuk^Ke fhtJe <ult rlgbtuLþk vtjl fhJt ftuLx[tfxh ck^tguj hnNu. ct¤ bswhtu htFe NftNu lrn.

26. rcÕz´d ftble ytExbtu btxu - slhj xuflefj MvuNeVefuNl ytuV rcÕz´d Jfomle çþf Bþsc yLþmhJtltk hnuNu. Mt>h ÃþM<eft øþsht<

çþf Mxtumo 20-ce, zeMx[ef Ntuv´d, mufxh-21, dtk^eldh&e b¤e hnuNu. su Juc mtEx www.ahmedabadcity.gov.in Wvh

27. bxehegj fu ceò xuMx´d hevtuxo ftuLxtfxhu vtu<tlt Fauo ftuvotuhuNl sKtJu <u søgtyu fhtJJtlt hnuNu. yt ykdultu mkÃËKo Fao <&t

Bgwrl.MxtVlu juctuhuxhe Mþ^e <&t buLGþVufah´d søgt Mþ^e jtJJt -jE sJtltu Fao vK ftuLx[tfxhu CtudJJtltu hnuNu.

28. btj su <u Mxtumo Wvh y&Jt mtEx Wvh jtuftulu lz<h l &tg <u he<u MËalt Bþsc W<thJtltu <ubs dtuXJJtltu hnuNu.

29. òu BGþ.yuLSlegh´d MxtV sKtJu <tu ftuLx[tfxhu atÕþ ftbu mtEx Wvh zeÍexj fubuht&e ftb atÕþ &gt vnujt, atÕþ ftbu <&t ftb ÃËKo

&gtltk Vtuxtud{tVm BGþrl.yturVmbtk ytvJtltk hnuNu <u rmJtg ftbLþk vubuLx fhJtbtk ytJNu lrn òu MxtV MËalt ytvu <tu fubuhtbtk&e

ftuBÃGþxhbtk Vtuxt x[tLmVh fhe ytvJtlt hnuNu. yt ykdu ftuE vK J^thtltu Fao ytvJtbtk ytJNu lrn.

30. ftuEvK fthKmh xuLzh h> fhJtbtk ytJu <tu ftuLx[tfxh <u ykdu ftuEvK «fthltu n¬ >tJtu fu J¤<hle btkdKe fhe NfNu lrn. yt Nh<

MJeftgo ntug <ubKu s xuLzh ChÔþk.

31. bxehegÕm suJt fu hu<e, #xtu, mebuLx, vtEv, rJduhu MxtLzzo bxehegÕm MvuNeVefuNl «btKult jtJJtlt hnuNu. sgtk ftuE atuFJx l

&E ntug ðgtk ytE.yum.ftuz «btKu bxehegÕm jtJJtLþk <&t xuMx´d fhtJJtLþk hnuNu. <ubs ftuLx[tfxhu muBvj yu«wÔz fhtÔgt ct> ftb

NY fhtJJtLþk hnuNu.

32. yt xuLzhbtk òu ftuE ytExb hne dE ntug <tu <u atÕþ yum.ytu.yth.btk&e juJtbtk ytJNu ylu òu yum.ytu.yth.btk ytExb l ntug <tu

btfuox huEx&e huEx yultjemem fhe su CtJ Ft<t <hV&e ytvu <u ftuLx[tfxhu juJtltu hnuNu. yt mbSlu s xuLzh ChJtLþk hnuNu. J^tht

le ytRxb btk ftuLx[tfxhle btkdKe Bþsc CtJ b¤Nu lrn.

33. atÕþ ftb >hBgtl «tuxufNlle mkÃËKo sJtc>the ftuLx[tfxhle hnuNu subtk vevzt, >tuhzt, CgMËaf ctuzo, jtj xul , cuhefuxekd xuv,

ÃjtMxef vèe, rJ. ftuLx[tfxhu jtJJtLþk ylu mtaJJtLþk hnuNu. ylu ftuEvK yfMbt< &Nu <tu <ule mkÃËKo sJtc>the ftuLx[tfxhle hnuNu.

34. MxtV MËalt ytvu <tu mtEx Wvh zuEje «tud{um hSMxh ftuLx[tfxhu htFJtLþk hnuNu. >hhtus ytme.mexe yuLSlegh©ele <ubtk mne juJtle

hnuNu, <ubtk >hhtus ftb fh<t bswhtule mkÏgt, fhuj ftbdehe <&t yr^ftheytuyu ftb Mþ^thJt fu «tud{um J^thJt ltuk^ fhuj ntug <tu <uLþk

ftuBÃjtgLm ytvJtLþk hnuNu ytJe ltuk^ltk sJtc l &gu fu <u «btKu M&¤ Wvh ybj l &gu ftuLx[tfxhlu vulÕxe fhJtle m•tt ડેપ્યુટી

સીટી ઈજનેર©elu hnuNu <u ykdu ftuLx[tfxh ftuE Jtk^tu jE NfNu lrn.

35. rlg< mbgbgto>tbtk ftb ÃþY l &gu&e xuLzh ¾jtuÍ bwsc ctfe ftbltkk 10.00% juFu vulÕxe BGþrl.ftuvtuohuNllu åþfJJtle hnuNu.

36. xuLzh le yt Nh<tu ce - 1 Vtubobtk sKtJuj Nh<tulu ytuJhYj fhNu.

Wvhtuf< <btb Nh<tu <&t rlgbtu buk ft¤SÃËJof Jtkauj Au ylu blu fçËj bksqh Au.

ftuLx[tfxhle mne - rm¬tu એડી. િીટી ઈજિેર

btuctEj lkch mt&u (œrûtK Ítul)

AHMEDABAD MUNICIPAL CORPORATION

ENGGNIERING DEPARTMENT

GENERAL SPECIFICATION

Time limit for the work shall be as per tender notice after the order to start the works. Progress

of work should be in proportion to time limit. The details of reinforcement of R.C.C. work shall be as

per design and instructions of ADD. CITY ENGINEER-5 and his order will be considered final.

The contractor shall have to maintain account of steel, cement and other materials that may be

brought by him on site. This account shall be regularly maintained and kept open for inspection by

Municipal Staff. Watering of all the items shall be as per instructions otherwise no payment shall be

made to contractors. Mixing of concrete shall be done by concrete mixer machine. Arrangements of

binding vibrator for R.C.C. works if required shall have to be made by the contractor.

The contractor shall be remain responsible for Workmen’s compensation if any accident. The

contractor shall arrange for barricading at night and arrangement of Pagi at night to direct the traffic. He

shall be responsible for any damage to public. If any incident happen, during the execution of work. In

case of dispute for unseen or overlooked items the decision of the Dy. City Engineer shall be final. The

contractor shall have to give site clean of all rubbish during the work and at the time of completion of

work and hand over the site with final finishing of the work as directed. All the rejected materials shall

be removed from site within 24 hours by contractor at this risk and cost. Debris shall have to cart daily

For mixing mortar either for masonry or for plaster or for any other purpose contractor shall have

to prepare through of bigger size and mix the mortar in the required proportion. In on case he shall be

allowed to mix the mortar either on floor or any finished surfaces. The contractor shall have to make his

own arrangement for water required for the work.

If any extra item crops up during the progress of work the same shall be carried out by the

contractor and he shall be paid at the rate fixed by D.C.E.. as per the rate analysis based on latest SOR

or if item is not available in SOR than based on current market rates. In case of extra item decision of

Add. City Engg. shall remain final regarding rate.

If in the interest of the Corporation it is necessary to change either any site or the design of the

propose work the contractor shall carry out the same at his quoted rates without charges any extra and

the contractor will have to carry out the works and he will be paid at the rate quoted by him. No claim

for extra rate for subsequent changes in site and design is entertained.

The cubical contents of the cement bag shall be taken as 1-20 cft. Per bag and the contractors

shall have to prepare the measures boxes according to this measure.

Octroi exemption passes shall not be given for any materials required for the work. Contractor

will be fully responsible for compliance of the various provisions under contract Act. 1970 and the Rules

framed the to under.

The tender for the work shall remain open for a period (120) days from the date of opening of

the tenders for this work and that the tenderer shall not be allowed to withdraw on modify the offer on

his own during the period. If any tenderer withdraw or makes any modifications or addition in the terms

and conditions of his tender not acceptable to the Municipal Corporation the Municipal Corporation

shall without prejudice to any right or remedy be at liberty to forfeit in full the said earnest money and

black list the contractor.

If work is not started within specified time limit i.e. within ten days from the date of order to

start the work the penalty of the 0.01% tender Amount per day of delay of start shall be recovered

separately from the immediate bills payable to the contractor. Contractor has to make his own

arrangement for procurement of steel and cement.

Contractors should note the following conditions carefully:-

i) Conditional tender shall not be accepted.

ii) All tenders are to be submitted in duplicate without which the tenders are liable to be rejected.

iii) In case of tender downloaded from website, tender fee & EMD should be submitted in form of

iv) Condition of Form - B1 only Standard Specification of material & code of practice will be

applicable. Form B1 can be is available in website. Specification shall be as per ' R & B Dept. -

Govt. of Gujarat booklets of Building Works & and Road Works Specifications published by

Gujarat Book Depot, Sector-21. Gandhinagar. Other techinical condition will be applicable as

per tender condition only.

CONTRACTOR'SSIGNATURE & STAMP ADD. CITY ENGINEER

Mobile No.:- (South Zone)