CAMOUFLAGE/ SYNTHETIC ENAMEL PAINTING TO ROOF TOP AND SHEET SURFACES AT CERTAIN OTM BLDGS IN TECH AREA AT AF STN BLY UNDER GE(AF) BAREILLY

Taking down cement plaster on brick work or stone walls, concrete surface etc. including raking out joints, hacking for key, scrubbing down with water etc at a height upto 20 mtr including removal of debris from site to out site MoD land.

M&L for rendering 15mm thick in cement mortar (1:4) on concrete/ brick surfaces including finishing surface even and smooth without using extra cement at height up to 20mtr all as specified.

M&L for preparation of old painted plastered or concrete surfaces / kerb stones/ parapets etc over 10cm width or girth and applying one coat of synthetic enamle paint all as specified.

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled manpower all as directed.

M&L for 2 mm thick (average thickness) white cement based putty including sand papering the puttied surfaces to form an even and smooth surface and applying two coats of weather proof exterior emulsion paint over and including a priming coat of exterior primer of same brand of paint making camouflage pattern of five different shades (in Sigma pattern or any specific pattern as approved by GE) to be applied with fully automatic airless spray machine of paint application with flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI or application of paint thourgh brushes/ rollers where airless spray machine not feasible as directed by GE and allowing 6 to 8 hrs to dry the surface for painting of subsequent coats all as specified.

M&L for preparation of old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth at a height upto 20 mtr from ground level and applying one coat of synthetic enamel paint of approved colour as base coat and making camouflage pattern (as approved by GE) by applying two more coats of different coloured patches in different shapes / pattern (single/ multi colours) as per site requirement or as directed by GE all as specified. Note for item No. 5 & 6 : (a) The work shall be executed by authorized applicator of manufacturer of paint as approved by GE. (b) The warranty for paint for five years alongwith security deposit @ 2.5% of contract rate shall be deposited by the contractor in favour of Accepting officer. (c) All necessary safety measures shall be taken during execution of work. (d) The subject work to be executed in highly restricted area and will be handed over in piece meal manner. (e) The quoted rate shall deemed to be included in the above provisions and nothing extra shall be paid on these provisions).