Revamping of 0.40 MGD Rapid Sand Filtration Plant at Watlab Water Supply Scheme Zaingeer under District Capex Budget 2026-2027.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.). With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing, fixing & commissioning of LED flood Lights of 20 watts with stand including all accessories required at site complete job inclusive all carriages.

Providing and fixing PPR ELbow 40mm for bleaching tank OF APPROVED MAKE.

Providing fixing of polycarbonate roofing sheet of approved make as per engineer incharge.

Over hauling stablizers installed at site. The job includes pouring/filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing successful commissioning complete job. 50 KV to 63 KV

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On concrete work

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including skirting in vertical & pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume, Red Brown (as directed by the engineer incharge)