SPL REPAIR TO BLDG NO 37 AT MI RM EME SCHOOL AT OL AND PROVN OF SHED FOR RO PLANT AND FOL DUMP AT 29 AD REGT AT LL UNDER GE (A) BARODA

Amount

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation, etc or for the shafts, well, cesspits, manholes, pier holes, etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete.

All as per described in item No-1 above but depth exe. 1.5 m & n. exc 3.0m

Excavating in post holes in soft and loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete.

M&L PCC 1:4:8 type D2 using 40mm graded aggregates as in foundation, filling and mass concrete complete.

M&L For providing precast cement concrete solid building blocks or slabs type B11:2:4 (20 mm graded agg) 7.5 cm thick (with plain or interlocking joints as directed ) setting in CM 1:6 in walls complete.

S&F steel work in tubular trusses including special shaped washer etc. using ERW or Induction butt welded MS tubes conforming to IS complete

S&F of structural steel works for plates (plain or chequered) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality-A complete.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10 cm long, dia of neck 5 to 10mm complete.

M&L Machine pressed coloured pre-cast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment over and including 20mm thick sand filling layer including watering and consolidation complete.

M&L for cement concrete 75mm thick (1:3:6) type C-1 (20mm graded crushed stone agg ) as in floor, etc.complete.

M&L for cement concrete 40mm thick (1:2:4) type B-) (12.5mm graded crushed stone agg ) surface finished even and smooth without using extra cement.complete.

S&F glass dividing strip 38mm width and 3mm thick inserted in floor complete.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete Internal wall surface finished even and smooth without using extra cement complete.

M&L for prepartion newly plastered surface of wall and applying two coats of Oil Bound Distemper over a coat of primer complete.

M&L for MS TMT bars 8-10 mm dia, cut to length bent to shape required including cranking/ Binding/ hooping of coloumns/hooking ends and binding with and including MS wire ( annealed) not less then 0.9 m dia or securing with clips complete

Demolition of stone slabs and tiles of any description or thickness in floors, laid bedded & pointed in any mortar and M&L for Vitrified Ceramic tiles 10 mm thick joint free (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes with CM 1:6 (Tile pattern and decoration may be as suggested & directed) complete

Demolition of stone slabs and tiles of any description or thickness in wall, laid bedded & pointed in any mortar and M&L for Glazed ceramic coloured walls tiles in vertical surfaces 300 x 450 x 6mm to 7 mm thick set over and including of pigment matching to tile color including 10mm thk rendering for screed bed on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles (Tile pattern and decoration may be as suggested & directed) complete.

Demolition of unreinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and M&L for Cement concrete type B1 1:2:4 (20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges using necessary form work etc. complete.

Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc,

M&L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete.

M&L Brickwork with sub class ‘B’ bricks straight or curved to any radius in half brick thick walls built in CM 1:4 complete

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each & removing from site complete

Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sqm but n.exc 4.00 Sqm each & removing from site complete

S&F of Powder coated (Minimum 50 Micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete.

S&F of Powder coated (Minimum 50 Micron) aluminium door shutters, side hung / sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc as per manufactures instruction & trade practice complete.

S&F of Powder coated (Minimum 50 Micron) aluminium window / ventilator shutters, side hung / sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws and grill etc as per manufactures instruction & trade practice complete.

S&F 4.00mm thick figured glass, pin head type and glazing with rubber beading or with glazing clips complete

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete.

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete.

S&F aluminium alloy handle 150 mm cast type anodised complete.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section complete.

M&L for 16-18mm thick green marble in one piece machine cut as in cooking plate form, steps, window cills and like set and jointed in grey cement slurry and pointed in coloured cement (1:2) using marble dust with admixture of pigment to match with marble shade, laid over and including 15mm thick screed bed in CM 1:4 complete.

Rounding to edges of stone slabs such as steps cooking platefrom and other similar situations complete

Complete removal of existing unservicable roof treatment incl taking down plaster, padding of any description and in any position, cleaning, flushing out junctions of parapet wall washing down with water etc to prepare surface for new WPT including removing off rubbish at out side MD land and M&L for 50mm average thick PCC padding in Cement concrete (1:2:4) type B0 (Using 12.5mm graded stone agg) mixed with liquid water proofing admixture as per manufacturer's instructions and to be finished even and smooth without using extra cement for laying of WPT (Liquid WPA measured seperately) complete.

M&L cleaning of concrete surfaces and apply priming coat of bitumen as primer @ 0.30Ltr per Sqm and apply evenly a tack coat of 85/25 grade industrial bitumen @ 1.20 kg per Sqm and laying APP based polymeric membrane minimum weighing not less than 3.0 kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms / sqm) land on primed surface by forced application with unrolled & bonded to substrate with side and end laps 75mm & 100mm and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top with a coat of bituminous aluminum paint @ 0.200 kg per Sqm etc. as per manufacturer’s instructions complete.

Supply only liquid water proofing admixture Make: Pidilite or equivalent

S&F in repairs stainless steel tubular curtain rails 25 mm dia drapery type with fixing brackets, stops, rollers etc. Complete

S&F in repairs stainless steel brackets fancy type suitable for curtain rails 25 mm dia complete

S&F in repairs cast iron 75 mm dia (outlet) floor/ nahani trap including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 all as specified.

S&F in repairs 15 mm dia galvanised iron tubing (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with tuflon tape complete.

S&F in repairs 20 mm dia galvanised iron tubing (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with tuflon tape complete.

M&L for Cutting chases for concealed pipe where required and pointing in cement mortar 1:3 in brick ball for bore of pipe 15/20 mm complete.

S&F for in repairs Galvanised, corrugated mild steel sheeting 0.80mm thick class 8 with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete.

M&L for in replacement 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh with 2mm dia GI wire to hanging and size of grid 605x605 mm Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete.

Dismantling single layer mangalore pattern or similar tiles in roofing.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding ridge or hips, valley gutter to wall, fixed with self tapping screws complete.

S&F pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding ridge or hips, valley gutter to wall, fixed with self tapping screws complete.

S&F in replacement (in lieu wooden truss 02 Nos) for steel work of roof trusses (framed), trussed, purlins, framing (beam, tee, angle, channel or flat section) including distance pieces, cleats etc. complete with welding grade of steel Fe-410W (Gde-E-250 quality A) including painting one shop coat of zinc chromate primer paint before febrication etc. complete.

S&F in replacement mild steel flats for wind ties / countersunk, balustars, nosing to steps for roof including securing bolts & similar work conforming to Fe 290 Gde 265 complete.

M&L for preparing for painting new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.

M&L for in replacement 2nd class hard wood battens for tiles clean sawn at 30cm centers sectional area exc 5 and n.exc 15 sqcm complete.

M&L for Preparing surfaces of wooden tile battens and treated with two coats of creosote oil etc. Complete.

M&L in repairs cement concrete 75mm thick 1:3:6 type C1 using 20 mm graded stone aggegate in plinth protection and paving, finished even and smooth without using extra cement including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with and including bitumen & sand 1:3 by weight complete.

Demolition of Cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) etc. Complete

M&L 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone agg ) as in sub base complete.

Taking down cement plaster from brick/concrete surface including scrubbing down with water etc complete.

M&L for 15mm thick rendering in CM 1:6 on brick work or concrete surfaces of wall (Internal) and to be finished even and smooth without using extra cement

M&L for 15mm thick rendering in two layer on brick work or concrete surface of External wall. 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement and to be finished even and smooth without using extra cement over 10mm thick plaster in CM1:6 complete.

M&L for rendering 10mm thick on brick or concrete surface of ceiling in CM 1:4 and to be finished even and smooth without using extra cement complete.

M&L for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over 3mm thick wall care putty on wall complete

M&L for prepartion of newly plastered surface of ceiling and applying three coat of white wash complete.

M&L for prepartion of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete.

M&L for complete removal of exisiting treatment on wall surface and apply two coat of Oil Bond distemper over 3mm thick wall care putty and priming coat etc. complete.

S&F in repairs vitreous china wash basin white flat back type of size 550x400mm including cutting for and pinning in ends of brackets and 32mm dia chromium plated waste coupling and down pipe complete

S&F in repairs 32mm bore low density polythelyne pipes (LDPE) of pressure rating 6kgf/cm2 fixed to wall or in floors etc. as in outlet pipe for WHB, urinal etc. complete.

S&F in repairs superior quality CP brass tubular towel rail 20mm dia, D type, 60 cm long between flanges fixed complete.

S&F in repairs vitrous china wash down water closet pan (pedestal pettern) white including white plastic water closet seat, back, closed pattern with flat bottom and cover and mild steel chromium plated or aluminidised hinging device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete.

S&F in repairs PVC flushing cistern low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC bend 32mm complete.

S&F in repairs 15 mm bore CP stop cock/Angle cook cast copper alloy, fency type screwed down high pressure with capston head screwed for iron pipe complete

S&F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete.

S&F concealed stop cock fency type with sheet flange cast copper alloy, scrwed down high precure with round operating knob for 15 mm bore pipe bore and fixed complete.

S&F in repair 15mm bore shower rose with swivel joints brass chromium plated Each of 65mm size including 30cm long arms C.P waste cup, washer etc complete.

S&F in repairs rotational moulded two layered polyethylene water storage tanks ISI Marked (cylindrical, vertical with closed top) 1000 litre capacity hoisted and fixed in position complete.

S&F in repair 25 mm bore ball brass valves, high pressure, with polythene float and fly nut complete.

S&F in repair 25 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete.

S&F in repair PVC connection 15mm bore with PTMT nut of length 450mm complete

Taking down soil waste and vent pipe (any size or pattern) including all fittings complete.

M&L in repairs PVC (SWR) bends without access door suitable for 75mm Bore pipe fixed complete.

Taking down soil waste and vent pipe (any size or pattern) including all fittings and M&L for PVC (SWR) pipes, 110 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches fixed complete

M&L for PVC (SWR) bends without access door suitable for 100mm bore pipe fixed complete.

M&L for PVC (SWR) bends with access door suitable for 100mm bore pipe fixed complete.

S&F in repair of sheet glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.

S&F in repairs C.P grating of size 150 x 150 mm.

S&F in repairs PVC (SWR) eaves gutter half rounded 150mm dia complete.

S&F in repairs CP Centre hole wash Basin mixer three in One 15 mm bore pipe complete.

S&F in repair CP Towel ring brass chromuim plated complete

S&F in repairs stainless steel soap dish recessed type complete. Similar to Make : Jaguar (queen's) (Cat No. AQN-7731) or equivalent

S&F in repair Toilet Paper holder of chromium plated fixed to all with chromium brass screw complete.

S&F in repair of chromium plated hand shower (Health faucet) 15mm dia 1 mtr long tube acrylic type complete.

M&L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection, chajja, fins, facia, roof bands etc and making good with PCC (1:11/2:3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) and applying three coat of white wash/ two coats of cement base paint to match with the existing surface complete. (Reiforcement will be measured and paid saperately under respective item.)

Provision and application of approved epoxy based bond coat on concrete surfaces or sound bonding of cold and new concrete surfaces according to manufacturer's instructions complete

Making of profile of structral memebers with polymer modified mortar in damaged areas 1:3 ( Cement:sand) mortar with 5 -10percentage addition of latex polymer,w/c ratio of 0.35 in 20 mm thk layers / including leveling etc complete.

Taking down existing UNSV copper/aluminium point wiring (light, fan, socket or power) and M&L for concealed point wiring with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in & including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases, sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet & fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit and making good disturbed surfaces of walls, floors, etc to match with existing by means of finising of slote with cement mortor & touching with the existing colour of wall with three coats complete for One light point controlled by one switch 6 Amp one way complete .

All as per above Item but for One fan point controlled by one switch 6 Amp one way complete.

All as per above Item but for One bell point controlled by one switch 6 Amp one way complete.

All as per above Item but for One 3 pin switch socket combination 6 amp on the independent board complete.

All as per above Item but for One 3 pin switch socket combination on same board with other switches complete.

All as per described in Item above but for point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board complete.

All as per described in Item above but for point wiring with 4.0 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 4.0 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point or sheet metal enclosures with socket plug top with MCB on independent board complete.

S&F in repairs MCB DB SPN 08 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete.

S&F in repairs MCBs SPN 5 to 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, to be fixed on DB.

All as per described in Item above but for MCBs SP 5 to 40 Amps

M&L in repairs switch piano flush type single pole, one way 6amp, 240V complete.

M&L in repairs switch socket combination 2 in 1, 5 pin 6 amp, 240 V complete

M&L in repairs switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type 240 V complete

S&F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. Complete.

S&F in repairs ceiling rose 65x17mm three terminals 230/250V complete.

M&L in repairs flush type bell push 6 amp, 240V duly marked for bell complete.

M&L in repairs Electronic ding dong bell AC 230V single pole .make Anchor/ Bajaj

S&F in repairs sheet metal enclosures with socket plug top, and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 20 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion complete.

M&L in repairs Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor complete. NOTE : Two runs of single core 6.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

S&F in repairs PVC rigid conduit medium grade suitable for telephone wiring concealed on wall floor ceiling etc of size not less than 20 mm including all fitting like bend elbow socket reducers etc. Complete.

S&F in repairs PVC Junction boxes 1-4 way with cover suitable for PVC rigid conduit of size 20 mm dia complete.

M&L in repairs Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No. 3 of 2009 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc. NOTES: The unit rate includes (i) earthing wire and protection pipe up to 7.5 metre. (ii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and additional length of watering pipe bends elbow.

S&F in repairs lamp holder, PVC/Polycarbonate type and back plate suitable for batten fitting alongwith 9watt LED lamp complete.

Supply, Fixing, Testing and commissioning in repairs of 4' LED not less than 1X18W LED Batten with LED tube not less than 18 watt. Similar to Batten cat Part No. REGAL BATTEN8 UPTO1X22W SSBSWH and LED tube light cat part No. CRYSTAL 1213T8DS TL18W LED865S GLASS of Make Havells or equivalent

Supply, Fixing, Testing & Commisioning in repairs of 2' 10W Mirror LED Batten with LED tube complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete. Similar to Make Havells, Model-ENDURALINEARNEOBS10WLED830SPCWH or equivalent

S&F in repairs wall security light 25 Watt LED type complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete. Similar to Make Havells, Model-ENDURAPEARL SL25W LED 757SASYTOPC or equivalent

S&F in replacement ceiling fan 1200 mm sweep including fixing of down rod and connection complete with & including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50 sq mm from ceiling rose/connector to fan complete all as specified and directed. Make : Usha/Bajaj/Havells. Note : Old unserviceable fan shall be deposited to AGE E/M store yard through RV.

S&F in replacement exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete. Note : Old unserviceable fan shall be deposited to AGE E/M store yard through RV.

D.B.Rathod