05/Fire/2020-21 (5th Call)

Amount

Annual Maintenance Contract (as per schedule given in the NIT) for the fire fighting wet riser / sprinkler system including electric motor, fire pumps, diesel driven fire engine, Fire Fighting accessories as per relevant BIS and keeping the system in perfect functional order round the clock, installed inventory below mentioned of various high rise buildings and schools of NDMC for servicing, maintenance, testing & fixing etc. with monthly two visit for each building by the Engineer/Technical Supervisor, four visit for each building by the Foreman and four visit for each building by the two Helpers or whenever required in case of any defect occur/mishappening in the system as per relevant Code and attend the same immediately after calling by the NDMC staff. AMC shall be carried out to the entire satisfaction of Fire Officer/Engineer In Charge.

NDMC BUILDINGS: 1. Chanakya Bhawan 2. Yashwant Place 3. Akbar Bhawan 4. Palika Place 5. Mohan Singh Place

NDMC SCHOOLS 1. Navyug Sr. Sec. School, Vinay Marg 2. Navyug School, (Primary) Jor Bagh 3. Navyug Sr. Sec. School, Moti Bagh 4. Navyug Sr. Sec. School, Lodhi Road 5. W.T.I., Netaji Nagar 6. N.P. Co-Ed Sr. Sec. School, Ansari Nagar 7. N.P. Co-Ed Sr. Sec. School, Moti Bagh 8. N.P. Co-Ed Sr. Sec. School, Laxmi Bai Nagar 9. N.P. Co-Ed Sr. Sec. School, Kidwai Nagar - 2 Nos. 10. N.P. Co-Ed Sec. School, Kitchner Road 11. N.P. Co-Ed Sec. School, Netaji Nagar 12. N.P. Co-Ed Sec. School, Babu Market, Sarojini Nagar 13. N.P. Co-Ed Sec. School, Aliganj 14. N.P. Pry. School, Kaka Nagar (Nursery & Urdu wing attached) 15. N.P. Sr. Sec. School, Tilak Marg 16. N.P. Pry. School No. 1, B Avenue, Sarojini Nagar 17. N.P. Pry. School, DG Block, Sarojini Nagar 18. N.P. Pry. School No. 1, Netaji Nagar (Nursery wing attached) 19. N.P. Pry. School No. 1, Moti Bagh (Nursery wing attached) 20. N.P. Pry. School, Ashoka Hotel (Nursery wing attached) 21. Science Centre in Tuglak Crecent Building 22. N.P. Pry. School, K. Kamraj Marg (Nursery wing attached)

Providing and Fixing of G.I. Tank fitting 80 mm dia with complete fitted nipple, sockets, tank connection etc. complete as per the direction of Fire Officer.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including cutting, screwing Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets, chilly clamps, including cutting holes and chases in bricks/core cutting in RCC wall/slab etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame including, dismantling of MS Pipe providing coat of steel primer and painting with two or more coats of synthetic enamel paint of approved required shade etc. complete to the entire satisfaction of Fire Officer. The measurement of pipe upto the level finish MS Pipe in the elbow.

25 mm dia.

80 mm dia.

100 mm dia.

150 mm dia.

P/F/T/C of First Aid Hose Reel Drum ISI marked IS:884 swinging type finish with signal red paint duly fitted with thermo plastic reinforced flexible hose reel of ISI marked IS:12585/444 type II size 20 mm dia, 30 mtr. long of yellow / black colour with shut off nozel including dismantling of hose reel drum etc. complete with all respect to the entire satisfaction of Fire Officer.

P/F/T/C of Hose Reel Tubing with thermo plastic reinforced 20 mm dia 30 metre long of yellow / black colour of high pressure ISI marked (IS:444) hose reel tubing type II in existing hose reel drum including dismantling of hose reel tubing etc. complete to the entire satisfaction of Fire Officer.

P/F/T/C of Single Headed Stainless Steel Valve ISI marked Type 'A' oblique pattern hydrant landing valve with 80mm dia flanged inlet and 63mm dia instantaneous type female out let complete with ABC blank cap and chain and all accessories as per IS :5290-1983 including dismantle single headed landing valve in all respect to the entire satisfaction of Fire Officer.

P/F/T/C of First Aid Hose Reel Drum ISI marked IS:884 swinging type finish with signal red paint including dismantling the same etc. complete with all respect to the entire satisfaction of Fire Officer.

P/F/T/C of cast iron flanged ISI marked Non Return Valve PN 1.6 complete with rubber insertion, nuts, compression flanges, bolts and washers etc. (IS : 5312) of following size (Kirloskar Make) including dismantling of NR valve with all respect to the entire satisfaction of Fire Officer.

100 mm dia

150 mm dia

P/F/T/C of cast iron flanged ISI marked Sluice Valve class PN 1.6 complete with rubber insertion, nuts, bolts, washers and compression flanges complete as required of following sizes of Kirloskar Make including dismantling of NR valve with all respect to the entire satisfaction of Fire Officer:

100 mm dia

150 mm dia

P/F/T/C of 15 mm dia Quartzoid Bulb Type Sprinkler to HD/Tyco make with tempreture rating 680C made out forged (brass and nickel) chrome finished UL listed pendent/side wall type including dismantling of 15 mm dia quartzoid etc. complete to the entire satisfaction of Fire Officer. " PENDENT TYPE"

P/F/T/C of 100 mm dia Pressure Gauge including U bend with cock valve etc. complete to the entire satisfaction of Fire Officer

P/F/T/C of Lead Acid battery Exide/Amron/ Luminus ( Heavy Duty) make of 12 volts, 20 plats and 150 AH fully charged for operation of D.G.Set/Diesel driven pump installed fire pump room including battery terminator and connecting copper cables of approved quality and including dismantling battery etc. as required at site & making necessary connection complete in all respect to the entire satisfaction of Fire Officer.

Complete servicing of Diesel driven fire engine of model DSM, Kirloskar make/Leyland make including replacement of air filter, fuel filter, oil filter by pass filter and packing including providing & fixing of servicing kit and replacement of engine oil as per capacity of fire engine of approved grade & quality including labour charges as required at site and making the diesel driven fire engine in proper working condition and complete in all respect to the entire satisfaction of Fire Officer.

Abobe 100 to 150 HP

Rewinding of 3 Phase, 50 HZ 440 Volt monoblock/main pump set of 3000 RPM including providing, fixing / commissioning of insulated copper winding wire (Wire –ATLAS or equivalent) of required size and capacity ( bunt copper wire shall not be returned to the deptt.) with providing suitable grade varnish (Doctor back make or equivalent ), packing papers, sleeves etc. The work including dismantling of existing motor with proper tools, cartage charge & labour charges etc and providing and fixing of nuts bolt of required size and proper alignment of the entire satisfaction Fire Officer.

5 HP Capacity

7.5 HP Capacity

15 HP Capacity

20 HP Capacity

60 HP to 100 HP

Above 100 HP to 150 HP

Repairing of Jockey/main pump of following with replacement/repairing of mechanical seal, ball bearing, gun metal sleeve, impeller welding & smoothing of S.S. shaft, including carriage of heavy fire pump from pump room to the workshop by mechanical transport including loading, unloading through chain pully etc. and dismantling of pump set and refixing the same after repairing etc. complete to the entire satisfaction of Fire Officer.

60 HP to 100 HP

Above 100 HP to 125 HP

Dismantling, Repairing, Fixing and Servicing of D.G. Engine self changing of damaged armature and making connection to D.G. Fire Engine etc. complete to the entire satisfaction of Fire Officer. 100 HP to 150 HP

P/F/T/C of Single Phase Preventer Relay for starter panel of 7.5/5 HP for three phase induction motor, 415 volt (6 wire) etc. complete to the entire satisfaction of Fire Officer.

Replacement of Power Contactor various following sizes, 3 pole type ML/MNX, 415 volt, 50 Hz 125 AMP., L&T make or equivalent for electric panel of the starter for the fire pump motor including dismantling of power contactor and spare coil and replacing the same including connection, wiring thimbles including labour charges etc. complete to the entire satisfaction of Fire Officer.

P/F/T/C of various following type MCB, 3/4 Pole, 415 volt, 50 HZ type L&T/Schneider Electric make or equivalent including dismantling of burnt MCB, connection, wiring, thimble etc. complete to the entire satisfaction of Fire Officer.

P/F/T/C of Forged Brass Ball valve of approved quality with screwed inside etc. complete to the entire satisfaction of Fire Officer ( Zoloto/Sant Brand only)

25 mm dia.

50 mm dia.

Providing and Placing Polyethylene Water Storage Tank on terrace (at all floor level) ISI : 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and over flow pipe, but without fittings and the base support for tank complete as per the direction of Fire Officer. 5,000 Ltrs. X 2 Tank = 10,000 Ltrs.

Providing suitable foundation for Polyethylene Water Storage Tank 2.15 M dia with 0.15 M height. at terrace level with having CC 1:2:4 (1 cement : 2 Coarsened : 4 Stone aggregate of 20 mm nominal size) for placing the same at terrace level. The work included 12 mm cement plaster 1:3 (1 cement : 3 Coarsened) with a floating coat of neat cement including centering and shuttering required etc. complete to the entire satisfaction of Fire Officer.

P/F/T/C of Kirloskar make submersible pump set of 1 HP, 3 Phase 50 Hz 3000 RPM, 440 Volts with check valve 32mm, Union, NRV 32 mm, bronze impeller and mechanical seal fitted and having suction size 40mm and delivery size 40mm, the pump shall be end suction type with cast iron body etc. complete to the entire satisfaction of Fire Officer.

Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, C.I. compression flange, gaskets conforming to IS 13095 of following sizes as required etc. complete to the entire satisfaction of Fire Officer

80 mm dia

100 mm dia

150 mm dia

Providing, installation, testing and commissioning of Non-Return Valve of PN 1.6 of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required and complete in all respect to the entire satisfaction of Fire Officer

80 mm dia

100 mm dia

150 mm dia

P/F/T/C of S.S. Y. Stainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange in the existing M.S. pipe line at site including nuts, bolts, washers and C.I. compression flanges etc. complete to the entire satisfaction Fire Officer

150 mm dia

200 mm dia

P/F/T/C of DN2-250 M, 250 A, type MCCB, 3 pole Breaking Capacity Icu at 415 V, AC, 50 Hz (kA) L & T make including dismantling of burnt MCCB etc. complete to the entire satisfaction of Fire officer.

P/F/T/C of Electro Magnetic relay of 25 Amp, 24 Volt 250 ohm for diesel engine of Kirti make including dismantling of burnt relay etc. complete to the entire satisfaction of Fire Officer.

Providing and Fixing G.I. Union, band and socket etc. in G.I. pipe including cutting and threading the pipe and making long screws etc. complete to the entire satisfaction of Fire Officer. a) 25 mm dia

P/F/T/C of Tyre Coupling, rubber bush and fixing the pump in proper alignment, line and level by providing suitable size of nuts and bolts etc. complete to the entire satisfaction of Fire Officer.

20 HP Capacity

Above 20 HP to 100 HP Capacity

P/F/T/C of Star Coupling, rubber bush and fixing the pump in proper alignment, line and level by providing suitable size of nuts & bolts as required at site complete…….

Upto 20 HP Capacity

Above 20 HP to 100 Hp Capacity

P/F of Solenoisn Coil of superior quality for required size of main pumps including nuts, bolts, sleevs including oiling of coupling from pump including heavy labour etc. complete to the entire satisfaction of Fire Officer. a) 60 HP to 125 HP

P/F/T/C of fire cabinet fabricated from 16 SWG M.S. Sheet with front double door opening including fixing/welding BRC fabric of size 25 x 25 mm of 12 SWG in door opening as well as providing 4 mm thick glass sheet/ 75 x 25 mm MS wire mesh having weight not lessthan 7.5 Kg PSM of required size including necessary locking arrangement painting with a coat of steel primer and two or more coats of synthetic enamel paint of approved quality and shade to the entire satisfaction of the Fire Officer.

Dismantling of Damaged Radiator of Diesel Fire Pump and Providing / Fixing / Testing / Commissioning new radiator etc. complete to the entire satisfaction of Fire Officer.

Painting and synthetic enamel paint of approved brand and manufacture of required colour to give and even shade One or more coats on old work etc. complete in all respect to the entire satisfaction of Fire Officer

P/F/T/C of various Bimetel/Thermal Overload Relay over Contactor,/ ML/MNX, 415Volts. ,50Hz. L & T Make or equivalent to the Electric Panel for monoblock/Jockey Pump including dismantling of connection, wiring, Relay etc. for proper wiring of Motor etc. complete to the entire satisfaction of Fire Officer/Engineer In-Charge.

MNX- 18/ MNX-22 ( 9 to 40 Amp.)

MNX 25 ( 20 to 33 Amp.)

Complete servicing and Fixing of Diesel Driven Fire Engine due to oil seal leakage and filling of water in the Fire Engine of model DSM, Kirloskar make including replacement of all filter kit, piston, piston ring, liner, rod, ring, head, gasket, seal set complete, thimble, Hose pipe, packing and repairing of bearing sets, pump injector etc. complete and providing & fixing items in the engine whenever necessary and replacement of engine oil (Castrol 40W) coolant as per capacity of fire engine of approved grade & quality including labour charges as required at site and making the diesel driven fire engine in proper working condition etc. complete to the entire satisfaction of Fire Officer.

Credit of dismantle battery including brass terminal required size and disconnection cables etc. nothing extra will be paid( dismantle battery shall be issued to the contractor as per market rate)

Credit of unserviceable material with cutting welding machine including cutting in wall/ slab whenever required and stacking of unserviciable material at site in al respect to the entire satisfaction of FO (dismantle material shall be issued to the contractor as per market rate)

M.S. Pipe, Hose Reel Drum etc.

Brass fitting accessories

Maku and Co